Search

Despite the rapid growth in the uptake of renewable energy technologies, the educational profile and the skills gained at University level do not always comply with the practical needs of the organisations working in the field. Furthermore, even though the residential sector has very high potential in curbing its CO2 emissions worldwide thus meeting the challenging goals set out by the international agreements, such reduction has been limited so far. Within this context, the ‘Skybelt’ project, co-funded by the EU under the framework of the Erasmus + programme aims at enhancing in several Universities of Asia and Europe the engineering skills of students of all level for application of sustainable renewable energy solutions in the built environment. With the target of increasing the employability of graduates and the impact of the project, a survey on the labour market needs for specialists with enhanced knowledge and skills in the topic of the project has been conducted in the related Asian countries. Hence, relevant industries, labour market organisations and other stakeholders have been interviewed and the main results of this analysis is reported in the present paper. As first outcome of this activity, the obtained results have been considered in the selection of the modules to be improved according to a student centred study approach.

This research is in the field of CFD modelling of heat engines, particularly the advanced CFD methodologies for the performance characterization of solar Stirling Engines with complex geometrical topologies. The research aims to investigate whether these methods can provide a more inclusive picture of the engine performance and how this information can be used for the design improvement of Stirling engines and the investigation of more complex engine topologies.

This research is focused on the performance evaluation of micro Combined Heat and Power (mCHP) systems based on modern prime mover technologies using both theoretical and experimental analysis. Estimations of the environmental and economic impact associated with their deployment in residential conditions were also carried out.\ud \ud Experimental work was performed on assessing the dynamic and steady-state performance of the 1 kWe Stirling based mCHP system (Whispergen), the 0.75 kWe Proton Exchange Membrane Fuel Cell (PEMFC, PA Hilton Ltd) and the 5.5 kWe Internal Combustion Engine (ICE) based mCHP (Dachs). Results obtained from experiments (such as partial efficiencies, nominal capacities etc.) were fed directly in a theoretical model. Primary energy requirements corresponding to average UK domestic conditions were simulated based on real life technical data. All theoretical work was conducted using EnergyPlus building simulation tool in which the operation of several hydronic heating systems was modelled. Furthermore, attained experimental data and previously published research results were used to validate the theoretical modelling process.\ud \ud Several operating strategies of the Stirling based mCHP unit were simulated in order to determine the regime which offers highest reduction in carbon emissions and household expenditures. In addition, variations in a number of parameters that significantly affect the performance of the system were investigated including energy consumption profiles, occupancy characteristics, dwelling thermal requirements, domestic hot water tank volume, etc). For the optimum performance strategy, several configurations of co-generation systems with nominal capacity in the range from 1 to 3 kWe were simulated. All simulated mCHP scenarios were compared against a conventional heating equipment. Finally, the advantages of a mass installation on a district level, consisting of 60, 120 and 240 dwellings and utilising a mixture of different mCHP units (ICE, Stirling, PEMFC), were estimated.

Solar energy has been actively used to drive cooling cycles for domestic and industrial applications, especially in remote areas with a lack of electricity supply for running conventional refrigeration or air-conditioning systems. A number of solar cooling technologies exists but their market penetration level is relatively low due to the high capital costs involved and a long pay-back period. Extensive R & D activities are underway at Universities and industrial companies across many countries to improve performance and reduce capital and running costs of solar cooling systems.\ud \ud Systems based on application of a liquid piston converter for solar water pumping and dynamic water desalination have been developed at Northumbria University. Some preliminary work has been completed on the development of a new solar cooling system built around the above fluid piston converter. In this work, the task is to experimentally and numerically investigate performance of the solar cooling system with the fluid piston converter. The developed theoretical model then can be used for determination of its rational design parameters.\ud \ud Experimental tests were conducted in the Energy Laboratory of the Faculty. The test rig consisted of a solar simulator and evacuated tube solar collector, coupled to the liquid piston converters, equipped with a heat exchanger. Three different configurations of the solar cooling unit were tested and a data acquisition system with pressure, temperature and liquid piston displacement sensors was used to evaluate the experimental performance on the cooling capacity.\ud \ud In the theoretical part of the study, the thermodynamic model of the solar cooling system was developed. In the calculation scheme, the system was split into a number of control volumes and ordinary differential equations of energy and mass conservation were used to describe mass and heat transfer in each such volume. The system of ordinary equations then was solved numerically in MATLAB/Simulink environment and information on the variations of pressure and temperatures in the control volumes of the system over the cycle were obtained.\ud Calibration of the mathematical model with the use of experimental data demonstrated that the model predicts the performance of the system with accuracy acceptable for engineering purposes.\ud \ud Experimental investigations showed that laboratory prototypes of the system demonstrate a stable operation during the tests with an amplitude and frequency of liquid piston oscillations being about 4- 6 cm and 3 Hz, respectively. The reduction in the air temperature in the cooling space was about 1 and 2 K, compared to the ambient temperature. The cooling effect increases with the raise in the heat input into the solar collector and in the flow rate of cooling water. The developed mathematical model of the system describes the pressure variation in the cycle, amplitude and frequency of oscillation of pistons with a level accuracy sufficient for performing engineering design calculations.\ud \ud Overall, both experimental and theoretical investigations confirm that the system demonstrates a capacity to produce a cooling effect with utilisation of solar energy. However, further R & D is required to enhance its performance.

This research is in the area of Thermal Energy Conversion, more specifically, in the conversion of solar thermal energy. This form of renewable energy can be utilised for production of power by using thermo-mechanical conversion systems – Stirling engines.\ud \ud The advantage of such the systems is in their capability to work on low and high temperature differences which is created by the concentrated solar radiation. To design and build efficient, high performance engines in a feasible period of time it is necessary to develop advanced mathematical models based on thermodynamic analysis which accurately describe heat and mass transfer processes taking place inside machines.\ud \ud The aim of this work was to develop such models, evaluate their accuracy by calibrating them against published and available experimental data and against more advanced three-dimensional Computational Fluid Dynamics models. The refined mathematical models then were coupled to Genetic Algorithm optimisation codes to find a rational set of engine’s design parameters which would ensure the high performance of machines.\ud \ud The validation of the developed Stirling engine models demonstrated that there was a good agreement between numerical results and published experimental data. The\ud new set of design parameters of the engine obtained from the optimisation procedure provides further enhancement of the engine performance. The mathematical modelling and design approaches developed in this study with the use of optimization procedures can be successfully applied in practice for creation of more efficient and advanced Stirling engines for power production.

The application of solar energy is one prospective solution to meet the sharp increase in global energy demand and alleviate the environmental issues, caused by the use of fossil fuels. Solar thermal energy has been actively utilized to operate small-scale desalination systems and solar water stills, which are one of the most promising technologies in the field of seawater desalination.\ud \ud A desalination system, consisting of multi-effect solar water still coupled to evacuated tube solar collectors and a novel modification of small fluid piston energy converter has been studied at Northumbria University. The task in this research was to experimentally test the possibility of the operation of system with capability to self-reduce the internal pressure inside the still in order to increase its productivity. It was demonstrated that the system was able to achieve vacuum conditions and maintain this level of pressure without using an external vacuum pump.\ud \ud In the theoretical investigation a thermodynamic mathematical model of the proposed system has been developed and used to solve the governing equations in a Matlab/Simulink environment. The output data was obtained in terms of variation of the pressure and temperatures inside the system as well as its distillate productivity. In the experimental investigation, the above described distillation system was developed at Northumbria University based on a laboratory prototype of a dynamic solar multi-effect water still and fluid piston energy converter designed and built previously by Prof K. Mahkamov. Series of experimental tests and numerical simulations were performed for the climatic conditions of Benghazi city in Libya.\ud \ud After validation of the mathematical model against previously published theoretical results and the experimental data obtained in this study, further investigations of the influence of decreasing internal pressure on the performance of the system was conducted. Overall, investigations confirm that this novel system demonstrates considerable improvement in the distillate productivity when compared to conventional solar stills.

This research presents a comparison between mainstream and emerging solar-thermal renewable energy technologies (RETs) using an integrated environmental and techno- economic assessment framework and the numerical modelling of heat pipes for solar thermal applications. Using the framework, the overall sustainability potential is quantified in terms of a novel environmental and techno-economic index (ETEI), combining the Levelised Life Cycle Impact (LLCI) with the Levelised Cost of Energy (LCOE). A set of three ‘mainstream’ (Photovoltaic-PV, Wind Turbine-WT, Bioenergy) and three ‘solar- thermal’ (Parabolic Trough Steam-driven turbine, Parabolic Trough and Linear Fresnel Reflectors, the latter two with Organic Rankine Cycle, respectively PT-ORC and LFR- ORC) RETs are used. Economic and environmental evaluation of the RETs for technological innovation is relevant in making an informed decision as to the value these technologies present. Hence, this study also assesses the efficiency of technical innovations of the six RETs, using the eco-efficiency approach by integrating life cycle assessment and life costing. A demonstration case study is presented for two sites with favourable renewable resources over 25-year operational life. The results show improved overall sustainability scores for solar-thermal, attributed mainly to the additional thermal energy recovery from the ORC. PV emerges as the most preferred option when only electricity generation is considered, whereas accounting for the additional thermal energy outputs makes PT-ORC as the most preferred option during to its technological maturity and LFR-ORC the second preferred option.\ud \ud The transient behaviour of a heat pipe, designed by an industrial partner of the Northumbria University team, leading Horizon 2020 R & I Activity Project on the development of a small solar thermal plant, was investigated numerically. The heat pipe is a part of the plant, and its operation was studied for different tilt angles (0 = 0°, 45°, 90°). The numerical solutions were obtained using a fully implicit Finite Difference Method that considered the motion of the liquid and a known time-varying temperature boundary condition at the liquid front. The liquid front position was found to be dependent on the applied heat flux, the initial conditions, and the thermophysical properties of the working fluid. Additionally, the distribution of power output and wall temperatures was predicted. The temperature distribution of the working fluid was consistent with experimental results from the previous literature and provided valuable insight into the room-temperature start- up phenomenon.