Search

A review on the sub-THz/THz gyrotrons is performed in this manuscript. The present development status of gyrotrons can be divided into three streams for the sake of better understanding: 1. low frequency (<35 GHz), medium power (<100 kW), small size and easy to handle gyrotrons for industrial applications, 2. very high power (1 MW or more), medium frequency (100–200 GHz) gyrotrons for plasma fusion applications, 3. low power (few tens of watt to kW), high frequency (>200 GHz) gyrotrons for various innovative applications. In this manuscript, the third stream of gyrotron development is reviewed. In last few decades several innovative applications are searched in sub-THz/THz band where the gyrotrons could be used as an efficient source of RF radiation. The applications of sub-THz/THz gyrotrons including the futuristic scope of the device are also discussed in this article. Further, several criticalities arise in the design and development when the gyrotron operation shifts toward the high frequency band. Various such design and technological challenges are also discussed here. Finally the development status of sub-THz/THz gyrotrons as per the use in various scientific and technological applications is also discussed. [ABSTRACT FROM AUTHOR]

Highlights: [•] Design of triple frequency MW gyrotron. [•] The mode selection process for three frequency operation of MW gyrotron. [•] Design of magnetically tunable magnetron injection gun. [•] CVD diamond window design for triple frequency operation of gyrotron. [Copyright &y& Elsevier]

Abstract: The design work of 95 GHz, 100 kW gyrotron for Active Denial System (ADS) application is reported in this manuscript. The mode selection is performed considering the various technical constraints. Particle-in-Cell code and indigenously developed code based on the generalized non-linear formalism are used in the beam–wave interaction computation and cavity design. Both the codes show good similarity in results. In addition, the design of electron beam source of 364 kW beam power, beam tunnel, depressed collector and RF window are also discussed. The design results confirm the RF power >100 kW with ≈50% tube efficiency. [Copyright &y& Elsevier]

Abstract: The beam tunnel, equipped with the high lossy ceramics, is designed for 95GHz gyrotron. The geometry of the beam tunnel is optimized considering the maximum RF absorption (ideally 100%) and the suppression of parasitic oscillations. The excitation of parasitic modes is a concerning problem for high frequency, high power gyrotrons. Considering the problem of parasitic mode excitation in beam tunnel, a detail analysis is performed for the suppression of these kinds of modes. Trajectory code EGUN and CST Microwave Studio are used for the simulations of electron beam trajectory and electromagnetic analysis, respectively. [Copyright &y& Elsevier]

Abstract: The design of weakly tapered interaction cavity for 0.3THz, 4kW gyrotron operating at the fundamental cyclotron harmonic is presented in this paper. The interaction cavity design and the beam-wave interaction computation are carried out for TE0,6 mode by using the Particle-in-Cell (PIC) electromagnetic simulation approach. The operating mode is selected by using the code GCOMS, in which various mode selection parameters and start oscillation current are calculated. Further, the power and frequency estimation are performed to finalize the cavity and electron beam parameters. The sensitivity analysis is done to finalize the tolerance limit in various parameters. Finally, the thermal and structural analyses are performed for the designed interaction cavity for the effective cooling. [Copyright &y& Elsevier]