Search

In the Dingwall gypsum quarry in Nova Scotia, Canada, operating in 1933–1955, the bedrock anhydrite deposits of the Carboniferous Windsor Group have been uncovered from beneath the secondary gypsum beds of the extracted raw material. The anhydrite has been subjected to weathering undergoing hydration (gypsification), transforming into secondary gypsum due to contact with water of meteoric derivation. The ongoing gypsification is associated with a volume increase and deformation of the quarry bottom. The surface layer of the rocks is locally split from the substrate and raised, forming spectacular hydration relief. It shows numerous domes, ridges and tepee structures with empty internal chambers, some of which represent unique hydration caves (swelling caves, Quellungshöhlen). The petrographic structure of the weathering zone has been revealed by macro- and microscopic observations. It was recognized that gypsification commonly starts from a developing network of tiny fractures penetrating massive anhydrite. The gypsification advances from the fractures towards the interior of the anhydrite rocks, which are subdivided into blocks or nodules similar to corestones. Characteristic zones can be recognized at the contact of the anhydrite and the secondary gypsum: (1) massive and/or microporous anhydrite, (2) anhydrite penetrated by tiny gypsum veinlets separating the disturbed crystals and their fragments (commonly along cleavage planes), (3) gypsum with scattered anhydrite relics, and (4) secondary gypsum. The secondary gypsum crystals grow both by replacement and displacement, and also as cement. Displacive growth, evidenced by abundant deformation of the fragmented anhydrite crystals, is the direct cause of the volume increase. Crystallization pressure exerted by gypsum growth is thought to be the main factor generating volume increase and, consequently, also the formation of new fractures allowing water access to “fresh” massive anhydrite and thus accelerating its further hydration. The expansive hydration is taking place within temperature range from 0 to ~30 °C in which the solubility of gypsum is lower than that of anhydrite. In such conditions, dissolving anhydrite yields a solution supersaturated with gypsum and the dissolution of anhydrite is simultaneous with in situ replacive gypsum crystallization. Accompanying displacive growth leads to volume increase in the poorly confined environment of the weathering zone that is susceptible to upward expansion.

Hydration of anhydrite to gypsum (gypsification of anhydrite) in the weathering zone sometimes causes a volume increase. This can lead to local detachments of the surface layer of the weathering anhydrite rocks and creation of the hydration cavities and rare hydration caves (or swelling caves; German: Quellungshöhlen) inside domes formed by the uplifted layer. Currently growing hydration cavities at the anhydrite bottom of the abandoned quarry at Dingwall, Canada, were studied with the use of photogrammetric, statistic, and petrographic methods. Seventy seven cavities were documented including 48 caves (cavities with the height ≥0.30 m large enough to accommodate an adult man). Forty three caves had proper entrances (inlets large enough for an adult to get inside). The cavities contain one flat domed or, less often, tepee-like chamber generally similar in shape to the host hydration landform. The majority of cavities showed the length <4.6 m, the width <3.0 m, and the height <0.85 m. Only 3 caves had the length >8.00 m and the height ≥0.80 m. The largest and the highest cave showed the sizes 10.7 × 6.6 × 1.1 m measured in 2008 which changed into 8.87 × 2.97 × 1.35 m in 2019. The other caves and cavities exhibit also morphological changes with time due to vertical and horizontal movements of rocks slabs and collapse of the roofs depending mainly on the location of expansive gypsification and its intensity. Precipitation (rain- and meltwater) accumulating at the foot of the initial uplift intensifies the hydration in this zone causing a centripetal pressure towards the landform and contributing to its further rising and enlargement of the cavity height. The basic condition required for hydration cave formation is temperature between 0 and 30 °C in which the solubility of gypsum is much lower than that of anhydrite. The meteoric water solution infiltrating in the vadose zone is dissolving the anhydrite and gradually reaches Ca sulphate concentration higher than the level of gypsum and lower than the level of anhydrite solubility. Then, the dissolving anhydrite yields a solution supersaturated with gypsum, capable of its precipitation, and the dissolution of anhydrite is simultaneous with in situ replacive/displacive gypsum crystallization. The crystallization pressure of gypsum is a direct cause of the rock deformations and creation of hydration caves. [Display omitted] • Morphology and origin of anhydrite hydration caves and cavities are presented. • The caves develop due to expansive gypsification of anhydrite in the weathering zone. • Caves form within domed and tepee-like landforms growing at the quarry bottom. • Hydration caves reach length up to 8.87 m and height up to 1.35 m. • Anhydrite gypsification requires a precipitation and temperature range of 0 °C to 30 °C. [ABSTRACT FROM AUTHOR]

In the Dingwall gypsum quarry in Nova Scotia, Canada, operating in 1933–1955, the bedrock anhydrite deposits of the Carboniferous Windsor Group have been uncovered from beneath the secondary gypsum beds of the extracted raw material. The anhydrite has been subjected to weathering undergoing hydration (gypsification), transforming into secondary gypsum due to contact with water of meteoric derivation. The ongoing gypsification is associated with a volume increase and deformation of the quarry bottom. The surface layer of the rocks is locally split from the substrate and raised, forming spectacular hydration relief. It shows numerous domes, ridges and tepee structures with empty internal chambers, some of which represent unique hydration caves (swelling caves, Quellungshöhlen). The petrographic structure of the weathering zone has been revealed by macro- and microscopic observations. It was recognized that gypsification commonly starts from a developing network of tiny fractures penetrating massive anhydrite. The gypsification advances from the fractures towards the interior of the anhydrite rocks, which are subdivided into blocks or nodules similar to corestones. Characteristic zones can be recognized at the contact of the anhydrite and the secondary gypsum: (1) massive and/or microporous anhydrite, (2) anhydrite penetrated by tiny gypsum veinlets separating the disturbed crystals and their fragments (commonly along cleavage planes), (3) gypsum with scattered anhydrite relics, and (4) secondary gypsum. The secondary gypsum crystals grow both by replacement and displacement, and also as cement. Displacive growth, evidenced by abundant deformation of the fragmented anhydrite crystals, is the direct cause of the volume increase. Crystallization pressure exerted by gypsum growth is thought to be the main factor generating volume increase and, consequently, also the formation of new fractures allowing water access to "fresh" massive anhydrite and thus accelerating its further hydration. The expansive hydration is taking place within temperature range from 0 to ~30 °C in which the solubility of gypsum is lower than that of anhydrite. In such conditions, dissolving anhydrite yields a solution supersaturated with gypsum and the dissolution of anhydrite is simultaneous with in situ replacive gypsum crystallization. Accompanying displacive growth leads to volume increase in the poorly confined environment of the weathering zone that is susceptible to upward expansion. [ABSTRACT FROM AUTHOR]