Search

Glauberite (Na2Ca[SO4]2) is an evaporitic mineral which is used in the industries of detergents, paper, glass, pharmacy, etc. Glauberite rocks are seldom found cropping out because they are very sensitive to weathering processes; for this reason their prospection is conducted by means of boreholes. Nowadays, geophysical techniques are not used to support the characterization of glauberite deposits due to the lack of knowledge of their physical properties. In this study geoelectrical methods are proposed as alternative techniques in the early stages of glauberite prospecting. Several glauberite units have been studied in different parts of the Ebro basin (Spain) by means of electrical resistivity tomography sections. The electrical resistivity range showed by glauberite deposits has been found to be low (10–100Ω·m) when the matrix component (clay and microcrystalline carbonates) is above 45% of the bulk composition of the rock. This type of rocks has been studied in Montes de Torrero (Zaragoza) and is the most common glauberite deposit case. Besides matrix-rich glauberite rocks, an exceptional case of a pure glauberite layer has been studied in Alcanadre (La Rioja). From this site, it has been estimated that deposits with glauberite crystal fraction close to 100% show a resistivity range of at least 3×103 Ω·m. Using this extreme value as reference, the Hashin–Shtrikman bounds have been calculated for glauberite rocks considering that they are constituted of four phases (glauberite, gypsum, anhydrite and matrix). When the matrix fraction represents 45% or more of the bulk rock, the resistivity range will be that of the lower Hashin–Shtrikman bound, which is similar for any combination of sulfate (glauberite, gypsum and/or anhydrite) composition; hence, it can be considered as a two-phase system (matrix and sulfate). For rocks with less than 30% of matrix fraction, the upper Hashin–Shtrikman bound trend must be considered; however, the resistivity values overlap, making it impossible to establish a classification. Between 30 and 45% of matrix fraction, there is a transitional domain. Additionally, some theoretical models representing the most common structures in sulfate rocks have been elaborated in order to help in the interpretation of the inverted resistivity images obtained from the field data. Some artifacts generated by the complexity of the resistivity distribution of the terrain have been identified in both data sets. [ABSTRACT FROM AUTHOR]

Abstract: Sulfate rocks have a sedimentary evaporitic origin and are present in many deposits worldwide. Among them, gypsum (dihydrated calcium sulfate) is the most common and is exploited for industrial purposes. Anhydrite (calcium sulfate) is frequently found in gypsum quarries and in non-outcropping sulfates. The greater hardness of anhydrite compared to gypsum causes a problem for gypsum extraction; quarry fronts have to be halted as soon as anhydrite is found. In this work the electrical properties of calcium sulfates have been studied by means of geoelectrical methods. A direct relationship between the electrical conductivity values of the calcium sulfate rocks and their lithological composition has been established with the lutitic matrix being the main controlling factor when it is well connected. When the matrix is under the percolation threshold the sulfate phases are dominant, and the electrical response of the rocks depends on the percentage of each phase. When the rock is matrix dominant, the electrical resistivity trend fits with the Hashin–Shtrikman lower bound for multiphase systems (considering gypsum, anhydrite and matrix as the components). On the other hand, when the rock is calcium sulfate dominant the trend shows the one of the Hashin–Shtrikman upper bound. The reference electrical resistivity value of pure anhydrite rocks has been defined as 104 Ω·m and geoelectrical classification for calcium sulfate rocks has been elaborated. With this classification it is possible to differentiate between calcium sulfate rocks with different composition from their electrical resistivity value. This classification has been checked with field examples and calculating the theoretical resistivity value of thin section photographs with the program ELECFEM2D. The electrical behavior of calcium sulfate rocks is a good reference for other type of rocks with electrically differentiated components, and similar methods can be used to define their geoelectrical responses. [Copyright &y& Elsevier]

Gypsum rocks are widely exploited in the world as industrial minerals. The purity of the gypsum rocks (percentage in gypsum mineral in the whole rock) is a critical factor to evaluate the potential exploitability of a gypsum deposit. It is considered than purities higher than 80% in gypsum are required to be economically profitable. Gypsum deposits have been studied with geoelectrical methods; a direct relationship between the electrical resistivity values of the gypsum rocks and its lithological composition has been established, with the presence of lutites being the main controlling factor in the geoelectrical response of the deposit. This phenomenon has been quantified in the present study, by means of a combination of theoretical calculations, laboratory measurements and field data acquisition. Direct modelling has been performed; the data have been inverted to obtain the mean electrical resistivity of the models. The laboratory measurements have been obtained from artificial gypsum-clay mixture pills, and the electrical resistivity has been measured using a simple electrical circuit with direct current power supply. Finally, electrical resistivity tomography data have been acquired in different evaporite Tertiary basins located in North East Spain; the selected gypsum deposits have different gypsum compositions. The geoelectrical response of gypsum rocks has been determined by comparing the resistivity values obtained from theoretical models, laboratory tests and field examples. A geoelectrical classification of gypsum rocks defining three types of gypsum rocks has been elaborated: (a) Pure Gypsum Rocks (>75% of gypsum content), (b) Transitional Gypsum Rocks (75-55%), and (c) Lutites and Gypsum-rich Lutites (<55%). From the economic point of view, the Pure Gypsum Rocks, displaying a resistivity value of >800 ohm.m, can be exploited as industrial rocks. The methodology used could be applied in other geoelectrical rock studies, given that this relationship between the resistive particles embedded within a conductive matrix depends on the connectivity of the matrix particles. [ABSTRACT FROM AUTHOR]