Search

In Germany, emissions from drained organic soils contributed approximately 53.7 Mio. t of carbon dioxide equivalents (CO2-eq) to the total national greenhouse gas (GHG) emissions in 2021. In addition to restoration measures, shifting management practices, rewetting, or using peatlands for paludiculture is expected to significantly reduce GHG emissions. The effects of climate change on these mitigation measures remains to be tested. In a 2017 experimental field study on agriculturally used grassland on organic soil, we assessed the effects of rewetting and of predicted climate warming on intensive grassland and on extensively managed sedge grassland (transplanted Carex acutiformis monoliths). The testing conditions of the two grassland types included drained versus rewetted conditions (annual mean water table of − 0.13 m below soil surface), ambient versus warming conditions (annual mean air temperature increase of + 0.8 to 1.3 °C; use of open top chambers), and the combination of rewetting and warming. We measured net ecosystem exchange of CO2, methane and nitrous oxide using the closed dynamic and static chamber method. Here, we report the results on the initial year of GHG measurements after transplanting adult Carex soil monoliths, including the controlled increase in water level and temperature. We observed higher N2O emissions than anticipated in all treatments. This was especially unexpected for the rewetted intensive grasslands and the Carex treatments, but largely attributable to the onset of rewetting coinciding with freeze–thaw cycles. However, this does not affect the overall outcomes on mitigation and adaptation trends. We found that warmer conditions increased total GHG emissions of the drained intensive grassland system from 48.4 to 66.9 t CO2-eq ha−1 year−1. The shift in grassland management towards Carex paludiculture resulted in the largest GHG reduction, producing a net cooling effect with an uptake of 11.1 t CO2-eq ha−1 year−1. Surprisingly, we found that this strong sink could be maintained under the simulated warming conditions ensuing an emission reduction potential of − 80 t CO2-eq ha−1 year−1. We emphasize that the results reflect a single initial measurement year and do not imply the permanence of the observed GHG sink function over time. Our findings affirm that rewetted peatlands with adapted plant species could sustain GHG mitigation and potentially promote ecosystem resilience, even under climate warming. In a warmer world, adaptation measures for organic soils should therefore include a change in management towards paludiculture. Multi-year studies are needed to support the findings of our one-year experiment. In general, the timing of rewetting should be considered carefully in mitigation measures. [ABSTRACT FROM AUTHOR]

The implementation of oxyfuel carbon capture and storage technologies in combination with use of alternative fuels comprising high biogenic shares is promoted as an attractive climate change mitigation option for the cement sector to achieve low or even negative carbon emissions. Here, we perform a prospective life cycle assessment of two state-of-the art cement plants, one in Sweden and one in Germany, under conventional and retrofitted oxyfuel conditions considering alternative fuel mixes with increasing bio-based fractions of forest residues or dedicated bioenergy crops. The analysis also considers effects of the projected changes in the electricity systems up to 2050. Retrofitting the cement plants to oxyfuel reduces climate change impacts between 74 and 91%, while with additional use of biomass as alternative fuel the cement plants reach negative emission between − 24 and − 169 gCO2eq. kgclinker−1, depending on operational condition, location, and biomass type. Additional emission reduction of − 10 (Sweden) and − 128 gCO2eq. kgclinker−1 (Germany) are expected from the decarbonization of the future electricity systems. Retrofitting the cement plants to oxyfuel conditions shows trade-offs with other environmental impacts (e.g., human toxicity, water and energy depletion), which are partially offset with projected changes in electricity systems. Our results illustrate the large climate change mitigation potential in the cement sector that can be achieved by the implementation of oxyfuel carbon capture and storage and biomass use as alternative fuel. [ABSTRACT FROM AUTHOR]

Identifying transmission sectors that may not be revealed by existing indicators, such as production-based emission (PBE) and consumption-based emission (CBE) accounting, is significant in emission reduction policies and provides insights into novel opportunities for companies and industries to reduce emissions. This study proposed an intermediate-based emission (IBE) accounting approach that considers indirect emissions from intermediate goods production and a case study was conducted using Exiobase 3.8. The highest IBE sector was 'basic iron' (1131 Mt-CO 2), and the sector's IBE was higher than its PBE (1052 Mt-CO 2). Additionally, the material sector, such as aluminum products (326 Mt-CO 2), was identified as a key transmission sector, although PBE (21 Mt-CO 2) and CBE (3 Mt-CO 2) of the sector is very low. In addition, IBEs were observed to be closely related to overall supply chain emissions in Germany, Japan, and Asia, and cooperation is required to reduce the emissions. The method enables approaching supply chains with large emissions from three perspectives (production-, consumption-, and intermediate-based accounting) and exploration of the emission reduction responsibilities of the three key sectors. The utility and discussion of the approach are consistent with Scope 3 emissions and facilitate fair allocation of emission reduction responsibilities to a larger number of countries and industries. • This study suggested intermediate-based emission (IBE) accounting. • Industries such as basic iron have high production–based emissions but higher IBE. • Intermediate industries not focused on by existing emission accounting identified. • Existing betweenness-based emission accounting much higher than actual emissions. • Germany, Japan, and Asian HEMs have strong correlation with IBE. [ABSTRACT FROM AUTHOR]

The Paris Agreement calls on all nations to pursue efforts to contribute to limiting the global temperature increase to 1.5 °C above pre-industrial levels. However, due to limited global, regional and country-specific analysis of highly ambitious GHG mitigation pathways, there is currently a lack of knowledge about the transformational changes needed in the coming decades to reach this target. Through a meta-analysis of mitigation scenarios for Germany, this article aims to contribute to an improved understanding of the changes needed in the energy system of an industrialized country. Differentiation among six key long-term energy system decarbonization strategies is suggested, and an analysis is presented of how these strategies will be pursued until 2050 in selected technologically detailed energy scenarios for Germany. The findings show, that certain strategies, including the widespread use of electricity-derived synthetic fuels in end-use sectors as well as behavioral changes, are typically applied to a greater extent in mitigation scenarios aiming at high GHG emission reductions compared to more moderate mitigation scenarios. The analysis also highlights that the pace of historical changes observed in Germany between 2000 and 2015 is clearly insufficient to adequately contribute to not only the 1.5 °C target, but also the 2 °C long-term global target. [ABSTRACT FROM AUTHOR]

Abstract: One of the cheapest ways to reduce CO2 emissions is thermal renovation of existing homes. Germany is a world leader in this project, with a strict building code, generous state subsidies, and an advanced renovation infrastructure. The effects of its policies are here explored in the light of progressive tightening of the building code, and the strict criteria for subsidies. Data on costs and outcomes of residential building renovations are presented from published reports on renovation projects, and cross-checked with projects investigated directly. Comparisons are made in terms of euros invested for every kilowatt hour of heating energy saved over the lifetime of the renovations, for standards ranging from 150kWh (the lowest standard) to 15kWh (the highest) of primary energy use per square metre of floor area per year. It is found that the lowest standard is an order of magnitude more cost-effective than the highest, in terms of both energy saved per euro invested, and return on investment over the lifetime of the renovations, regardless of fuel prices. It is argued that this throws into question Germany''s policy of progressively regulating for higher renovation standards, and offering subsidies only for projects that go beyond the minimum standard. [Copyright &y& Elsevier]