Search

Recent theoretical and experimental studies demonstrated that breaking of the sublattice symmetry in graphene produces an energy gap at the former Dirac point. We describe the synthesis of graphene sheets decorated with ultrathin, Si-rich two-dimensional (2D) islands (i.e., Gr:Si sheets), in which the electronic property of graphene is modulated by coupling with the Si-islands. Analyses based on transmission electron microscopy, atomic force microscopy, and electron and optical spectroscopies confirmed that Si-islands with thicknesses of ~2 to 4 nm and a lateral size of several tens of nm were bonded to graphene via van der Waals interactions. Field-effect transistors (FETs) based on Gr:Si sheets exhibited enhanced transconductance and maximum-to-minimum current level compared to bare-graphene FETs, and their magnitudes gradually increased with increasing coverage of Si layers on the graphene. The temperature dependent current-voltage measurements of the Gr:Si sheet showed approximately a 2-fold increase in the resistance by decreasing the temperature from 250 to 10 K, which confirmed the opening of the substantial bandgap (~2.5-3.2 meV) in graphene by coupling with Si islands.

We report the direct formation of ordered memristor nanostructures on metal and graphene electrodes by a block copolymer self-assembly process. Optimized surface functionalization provides stacking structures of Si-containing block copolymer thin films to generate uniform memristor device structures. Both the silicon oxide film and nanodot memristors, which were formed by the plasma oxidation of the self-assembled block copolymer thin films, presented unipolar switching behaviors with appropriate set and reset voltages for resistive memory applications. This approach offers a very convenient pathway to fabricate ultrahigh-density resistive memory devices without relying on high-cost lithography and pattern-transfer processes., (© 2012 American Chemical Society)

The performance of a polymer photovoltaic device using multilayered graphene on an amorphous PET substrate as the electrode was studied. The changes in surface morphology of graphene coated polyethylene terephthalate (PETG) substrate upon thermal annealing were investigated by atomic force microscopy (AFM), field emission scanning electron microscope (FE-SEM) and current-voltage characteristics. The root mean square (RMS) roughness of PETG substrate before annealing was 36.5 nm that decreased to 11.5 nm after 10 min thermal annealing at 110 degrees C. The mean grain size of the substrate decreased from 2301 nm2 to 848 nm2. The PETG surface became smooth when thermally annealed as the voids created by the bubbles in the graphene layer were filled up with thermal expansion of the PET substrate. However, cracks present initially on the graphene due to surface stress between the graphene and PET layer grew further upon annealing that deteriorated the device performance. This study on the graphene surface morphology change upon annealing and the consequent drop in device performance vis-à-vis an ITO glass electrode shows potential drawback of solar cell device fabrication on such flexible substrates.

This article presents a review of current research activities on the hybrid heterostructures of inorganic nanostructures grown directly on graphene layers, which can be categorized primarily as zero-dimensional nanoparticles; one-dimensional nanorods, nanowires, and nanotubes; and two-dimensional nanowalls. For the hybrid structures, the nanostructures exhibit excellent material characteristics including high carrier mobility and radiative recombination rate as well as long-term stability while graphene films show good optical transparency, mechanical flexibility, and electrical conductivity. Accordingly, the versatile and fascinating properties of the nanostructures grown on graphene layers make it possible to fabricate high-performance optoelectronic and electronic devices even in transferable, flexible, or stretchable forms. Here, we review preparation methods and possible device applications of the hybrid structures consisting of various types of inorganic nanostructures grown on graphene layers.