Search

Objective: A challenging task for an electroencephalography (EEG)-based asynchronous brain-computer interface (BCI) is to effectively distinguish between the idle state and the control state while maintaining a short response time and a high accuracy when commands are issued in the control state. This study proposes a novel hybrid asynchronous BCI system based on a combination of steady-state visual evoked potentials (SSVEPs) in the EEG signal and blink-related electrooculography (EOG) signals. Methods: Twelve buttons corresponding to 12 characters are included in the graphical user interface (GUI). These buttons flicker at different fixed frequencies and phases to evoke SSVEPs and are simultaneously highlighted by changing their sizes. The user can select a character by focusing on its frequency-phase stimulus and simultaneously blinking his/her eyes in accordance with its highlighting as his/her EEG and EOG signals are recorded. A multifrequency band-based canonical correlation analysis (CCA) method is applied to the EEG data to detect the evoked SSVEPs, whereas the EOG data are analyzed to identify the user's blinks. Finally, the target character is identified based on the SSVEP and blink detection results. Results: Ten healthy subjects participated in our experiments and achieved an average information transfer rate (ITR) of 105.52 bits/min, an average accuracy of 95.42%, an average response time of 1.34 s and an average false-positive rate (FPR) of 0.8%. Conclusion: The proposed BCI generates multiple commands with a high ITR and low FPR. Significance: The hybrid asynchronous BCI has great potential for practical applications in communication and control. [ABSTRACT FROM AUTHOR]

Objective: This paper presents an asyn-chronous electrooculography (EOG)-based human–machine interface (HMI) for smart home environmental control with the purpose of providing daily assistance for severe spinal cord injury (SCI) patients. Methods: The proposed HMI allows users to interact with a smart home environment through eye blinking. Specifically, several buttons, each corresponding to a control command, randomly flash on a graphical user interface. Each flash of the buttons functions as a visual cue for the user to blink. To issue a control command, the user can blink synchronously with the flashes of the corresponding button. Through detecting blinks based on the recorded EOG signal, the target button and its corresponding control command are determined. Seven SCI patients participated in an online experiment, during which the patients were required to control a smart home environment including household electrical appliances, an intelligent wheelchair, as well as a nursing bed via the proposed HMI. Results: The average false operation ratio in the control state was 4.1%, whereas during the idle state, no false operations occurred. Conclusion: All SCI patients were able to control the smart home environment using the proposed EOG-based HMI with satisfactory performance in terms of the false operation ratio in both the control and the idle states. Significance: The proposed HMI offers a simple and effective approach for patients with severe SCIs to control a smart home environment. Therefore, it is promising to assist severe SCI patients in their daily lives. [ABSTRACT FROM AUTHOR]

Objective: Nonmanual human–machine interfaces (HMIs) have been studied for wheelchair control with the aim of helping severely paralyzed individuals regain some mobility. The challenge is to rapidly, accurately, and sufficiently produce control commands, such as left and right turns, forward and backward motions, acceleration, deceleration, and stopping. In this paper, a novel electrooculogram (EOG) based HMI is proposed for wheelchair control. Methods: A total of 13 flashing buttons, each of which corresponds to a command, are presented in the graphical user interface. These buttons flash on a one-by-one manner in a predefined sequence. The user can select a button by blinking in sync with its flashes. The algorithm detects the eye blinks from a channel of vertical EOG data and determines the user's target button based on the synchronization between the detected blinks and the button's flashes. Results: For healthy subjects/patients with spinal cord injuries, the proposed HMI achieved an average accuracy of 96.7% / 91.7% and a response time of 3.53 s/3.67 s with 0 false positive rates (FPRs). Conclusion: Using one channel of vertical EOG signals associated with eye blinks, the proposed HMI can accurately provide sufficient commands with a satisfactory response time. Significance: The proposed HMI provides a novel nonmanual approach for severely paralyzed individuals to control a wheelchair. Compared with a newly established EOG-based HMI, the proposed HMI can generate more commands with higher accuracy, lower FPR, and fewer electrodes. [ABSTRACT FROM AUTHOR]

Biological signals, including electroencephalography (EEG) and electrooculography (EOG), are often used to develop switches, which represent a class of typical asynchronous human–computer interfaces (HCIs) in which control and idle states need to be distinguished based on a criterion. Determining a satisfactory criterion for rapid and accurate discrimination between control and idle states remains a challenging issue, as EEG signals are highly noisy and nonstationary, and EOG signals are highly affected by unintended/spontaneous eye movements. Therefore, most existing EEG- or EOG-based switches are characterized by disadvantages of long response times (RTs) or high false positive rates (FPRs). The primary contribution of this work is the development of a novel EOG-based switch design, in which a visual trigger mechanism is introduced to guide the users’ blinks and to assist in detecting blinks. Specifically, the graphical user interface (GUI) includes a switch button that flashes once per 1.2 s. The user is instructed to blink synchronously with the flashes of the switch button to issue an on/off command while a single-channel EOG signal is collected. A waveform detection algorithm is applied to the ongoing EOG signal, which discriminates the intended and unintended blinks mainly based on the synchrony between the blink and the switch buttons flash. Once an intended blink, i.e., a blink corresponding to a button’s flash, is detected, the system issues an on/off command. As one application, the proposed EOG-based switch is used to produce start/stop commands for a wheelchair. Several online experiments were conducted with ten healthy subjects. An average accuracy of 99.5%, an RT of 1.3 s for issuing a switch command in the control state, and an average FPR of 0.10/min in the idle state were achieved. The experimental results therefore demonstrate the effectiveness of the single-channel EOG-based switch. [ABSTRACT FROM AUTHOR]

Electrooculography (EOG) signals, which can be used to infer the intentions of a user based on eye movements, are widely used in human–computer interface (HCI) systems. Most existing EOG-based HCI systems incorporate a limited number of commands because they generally associate different commands with a few different types of eye movements, such as looking up, down, left, or right. This paper presents a novel single-channel EOG-based HCI that allows users to spell asynchronously by only blinking. Forty buttons corresponding to 40 characters displayed to the user via a graphical user interface are intensified in a random order. To select a button, the user must blink his/her eyes in synchrony as the target button is flashed. Two data processing procedures, specifically support vector machine (SVM) classification and waveform detection, are combined to detect eye blinks. During detection, we simultaneously feed the feature vectors extracted from the ongoing EOG signal into the SVM classification and waveform detection modules. Decisions are made based on the results of the SVM classification and waveform detection. Three online experiments were conducted with eight healthy subjects. We achieved an average accuracy of 94.4% and a response time of 4.14 s for selecting a character in synchronous mode, as well as an average accuracy of 93.43% and a false positive rate of 0.03/min in the idle state in asynchronous mode. The experimental results, therefore, demonstrated the effectiveness of this single-channel EOG-based speller. [ABSTRACT FROM AUTHOR]

Objective: This study proposes an event-related potential (ERP) brain-computer interface (BCI)-based environmental control system that integrates household electrical appliances, a nursing bed, and an intelligent wheelchair to provide daily assistance to paralyzed patients with severe spinal cord injuries (SCIs). Methods: An asynchronous mode is used to switch the environmental control system on or off or to select a device (e.g., a TV) for achieving self-paced control. In the asynchronous mode, we introduce several pseudo-keys and a verification mechanism to effectively reduce the false operation rate. By contrast, when the user selects a function of the device (e.g., a TV channel), a synchronous mode is used to improve the accuracy and speed of BCI detection. Two experiments involving six SCI patients were conducted separately in a nursing bed and a wheelchair, and the patients were instructed to control the nursing bed, the wheelchair, and household electrical appliances (an electric light, an air conditioner, and a TV). Results: The average false rate of BCI commands in the control state was 10.4%, whereas the average false operation ratio was 4.9% (a false BCI command might not necessarily results in a false operation according to our system design). During the idle state, there was an average of 0.97 false positives/min, which did not result in any false operations. Conclusion: All SCI patients could use the proposed ERP BCI-based environmental control system satisfactorily. Significance: The proposed ERP-based environmental control system could be used to assist patients with severe SCIs in their daily lives. [ABSTRACT FROM AUTHOR]

The key issue of electroencephalography (EEG)-based brain switches is to detect the control and idle states in an asynchronous manner. Most existing methods rely on a threshold. However, it is often time consuming to select a satisfactory threshold, and the chosen threshold might be inappropriate over a long period of time due to the variability of the EEG signals. This paper presents a new P300-based threshold-free brain switch. Specifically, one target button and three pseudo buttons, which are intensified in a random order to produce P300 potential, are set in the graphical user interface. The user can issue a switch command by focusing on the target button. Two support vector machine (SVM) classifiers, namely, SVM1 and SVM2, are used in the detection algorithm. During detection, we first obtained four SVM scores, corresponding to the four flashing buttons, by applying SVM1 to the ongoing EEG. If the SVM score corresponding to the target button was negative or not at the maximum, then an idle state was determined. Moreover, if the target button had a maximum and positive score, then we fed the four SVM scores as features into SVM2 to further discriminate the control and idle states. As an application, this brain switch was used to produce a start/stop command for an intelligent wheelchair, of which the left, right, forward, backward functions were carried out by an autonomous navigation system. Several experiments were conducted with eight healthy subjects and five patients with spinal cord injuries (SCIs). The experimental results not only demonstrated the effectiveness of our approach but also illustrated the potential application for patients with SCIs. [ABSTRACT FROM AUTHOR]