Search

Galvanized steel scrap flow and injection into the HIsarna reactor are investigated using discrete element method (DEM). The scrap particle is fed into the reactor through an inclined chute and hits the slag surface where the zinc content is evaporated and solid particles melt. A DEM model is setup and validated using experimental data obtained from the exact plant‐scale chute geometry and scrap particles. Using the DEM model, the effect of chute inclination, injection elevation, injection mode (batch and continuous), batch size, and flowrate on particle distribution and exerted pressure on the slag surface are investigated. It is found that continuous mode of injection is the most suitable method to increase the spread of particles and also to reduce the exerted pressure on the slag surface. Placing dent‐like obstacles at the tip of the chute significantly increases the impact area, especially for batchwise injection, thus reducing force and pressure on the slag surface that minimizes the risk of liquid splash. Larger particle impact area is also beneficial to obtain higher zinc evaporation rate from particle surface and also to minimize the slag surface temperature disturbance. [ABSTRACT FROM AUTHOR]

HIsarna is a novel ironmaking process with great raw materials versatility that is attractive for various secondary resources. Among the materials that can be recycled, there is steel scrap which is fed to the furnace bath through an inclined chute. The velocity distribution of the scrap particles along the chute affects the particles' distribution on the liquid slag and, thereupon, the efficient operation of the reactor. In this study, the flow of steel scrap particles along an inclined chute with the same dimensions as those of the actual chute of the HIsarna plant is investigated experimentally and numerically. The simulations are validated using chute tip velocity and mass fractions collected at the different compartments of a sampling device. Translational and angular velocity distributions along and across the chute are reported, and the effect of different parameters are investigated. The impact of the shape of the particles on the simulation process is found to be negligible. The angular velocity distribution in cross‐sections of the chute exhibited a V‐shaped orientation, whereas the translational velocity displayed similar values across the cross‐sections. Moreover, translational velocity appeared to increase with increasing inclination angles, whereas angular velocity increased with decreasing batch size. [ABSTRACT FROM AUTHOR]