Search

Based on end-quenching experiments combined with conductivity, hardness testing, and microstructural characterization, the quenching sensitivity of the mechanical and corrosion properties of 7475 aluminum alloy was investigated. The study revealed that as the quenching rate decreased, both the mechanical properties and exfoliation corrosion resistance exhibited increased quenching sensitivity. With the quenching rate decreasing from 31.9 °C/s to 2.5 °C/s, the conductivity increased by 4.1%IACS, the hardness decreased by 31%, the exfoliation corrosion grade transitioned from EC to ED, and the maximum exfoliation corrosion depth increased from 237 μm to 508 μm. As the quenching rate decreased, the η phase sequentially precipitated at recrystallized grain boundaries (RGBs), E phase particles, and subgrain boundaries (SGBs), while the T phase primarily precipitated on E phase particles. Furthermore, the significant precipitation of η and T phases led to a notable reduction in the quantity of age-precipitated phases, an increase in their size, and poor coherency with the matrix, resulting in decreased mechanical properties and a higher quenching sensitivity of the mechanical performance. Meanwhile, with the reduction in quenching rate, the size and spacing of grain boundary precipitated phases increased, the Zn and Mg contents of grain boundary precipitated phases increased, and the Precipitation Free Zone (PFZ) widened, leading to decreased exfoliation corrosion resistance and higher quenching sensitivity of the exfoliation corrosion performance. [ABSTRACT FROM AUTHOR]

BaTiO-CoFe O composite thin films with different thicknesses were fabricated via chemical solution deposition. Magnetic annealing and non-field annealing processes were applied in the sintering process, respectively. Variations of the structure and magnetic properties of the composite films induced by the magnetic annealing were investigated. It is found that the mean grain size and grain boundary are increased and decreased, respectively. For the magnetic-annealed films, the internal strain is reduced with the increase of film thickness. Magnetic measurements show that the M is also increased with the film thickness and the magnetic-annealed films have bigger M values than the non-field-annealed films. Based on the experimental results, it can be concluded that the effect of magnetic annealing on the structure and properties of the composite films is decreased with the increase of film thickness. [ABSTRACT FROM AUTHOR]

In this study, Fe-bearing Mg-3%Al alloys were inoculated by combining carbon with or without Ca. Both processes can significantly refine the grain size of Mg-3%Al alloys. The highest refining efficiency can be obtained by carbon combined with Ca. The synergistic grain refining efficiency can be attributed to the constitutional undercooling produced by the addition of Ca. Two kinds of carbon-containing nuclei with duplex-phase particles and cluster particles were observed in the carbon-inoculated alloys. A thermodynamic model was established to disclose the formation mechanisms of the duplex-phase particles and Al4C3 cluster particles. This thermodynamic model is based on the change of Gibbs free energy for the formation of these two kinds of particles. The calculated results show that these two particles can form spontaneously, since the change of Gibbs free energy is negative. However, the Gibbs free change of the duplex-phase particle is more negative than the Al4C3 cluster particle. This indicates that the adsorption process is more spontaneous than the cluster process, and tiny Al4C3 particles are preferred to form duplex-phase particle, rather than gathering to form an Al4C3 cluster particle. In addition, the addition of Ca can reduce the interfacial energy between the Al4C3 phase and the Al–Fe phase and promote the formation of duplex-phase particles. [ABSTRACT FROM AUTHOR]