Search

• Described the current status of land-leveling implements. • Analyzed the current status of laser-controlled leveling technology. • Analyzed the current status of GNSS-control leveling technology. • Analyzed the benefits of the application of land-leveling technology. • Discussed the challenges and future trends of land-leveling technology. Land leveling technology is necessary for land cultivation and is an important support for sustainable agricultural development. First, this paper reviews the current status of land-leveling implements, including dry-land and paddy-field leveling implements. Second, two precision land-leveling technologies, laser-controlled systems and the Global Navigation Satellite System (GNSS), are reviewed. The current status of laser-controlled leveling technology is considered in terms of its three primary components, the laser transmitter, laser receiver, and control terminal. The current status of GNSS-controlled leveling technology is also considered in terms of three aspects: three-dimensional (3D) topographical measurement of farmland, calculation of reference height and soil volume, and planning of work paths. The actual benefits of land-leveling technology applied to the production of different crops are statistically analyzed using metrics including improved land utilization, water savings, and increased yields. Finally, the challenges and future trends in land-leveling implements and technologies are discussed. [ABSTRACT FROM AUTHOR]

• Collecting bottom layer contour information of paddy fields using the chassis. • Establishment of a digital modeling method for bottom layer of paddy fields. • The height estimation method of any point in paddy field bottom layer is designed. To realize intelligent, accurate, and efficient operation of paddy field machinery that drive the paddy field bottom-layer below the tillage layer, the paddy field bottom-layer contours must be known. However, surface measurement systems cannot directly measure paddy field bottom-layer contours, making it difficult to collect and digitally model. In this study, an agricultural machine without a shock-absorbing suspension on the rear axle was used as an acquisition platform. Combined with a global navigation satellite system (GNSS) and attitude and heading reference system (AHRS) positional measurement technology, a 1/4 single-degree-of-freedom model of the vehicle body collected bottom-layer contour information of paddy fields. Based on the Delaunay triangulation principle, a digital model of the bottom-layer contour was established based on the collected bottom-layer contour point set. Subsequently, the ray method, used to extract specific triangles containing predicted points, and the point-plane intersection principle, used to estimate the elevation of arbitrary points in the whole area of bottom-layer, were used. Straight line contour acquisition on concrete road slope, contour acquisition on the bottom-layer surface of a paddy field, and elevation estimation of arbitrary points in the whole area were performed as verification tests. The results indicate that, in the x, y, and z axes, the average errors of the cement slope profile collection were 0.86, 0.68, and 0.55 cm, respectively, with standard errors of 0.99, 0.78, and 0.67 cm, respectively. Further, the average errors of the bottom-layer contour collection of the paddy field were 1.57, 0.91, and 1.25 cm, respectively, with standard errors of 1.87, 1.01, and 1.55 cm, respectively. The average error of elevation estimation at any point in the whole area was 1.25 cm with a standard error of 1.49 cm. The presented method can continuously and accurately acquire bottom-layer contour information, construct a digital model of the bottom-layer contour, accurately predict the location coordinates of any point within the field, and provide a reference for the walking environment of intelligent farming machines and measurement methods for the production of high-precision topographic maps. [ABSTRACT FROM AUTHOR]