Search

Nowadays, the hybridization of natural and glass fiber has promised several advantages as a green composite. Nevertheless, their different characteristics lead to poor mechanical bonding. In this work, agel fiber and glass fiber was used as reinforcements, and activated carbon filler was added to the polymer matrix of a hybrid composite to modify its characteristics and mechanical properties. A tensile and bending test was conducted to evaluate the effect of three different weight percentages of activated carbon filler (1, 2, and 4 wt%). Vacuum-assisted resin infusion was used to manufacture the hybrid composite to obtain the high-quality composite. The results have revealed that adding 1 wt% filler yielded the most optimum result with the highest tensile strength, flexural strength, and elastic modulus, respectively: 112.90 MPa, 85.26 MPa, and 1.80 GPa. A higher weight percentage of activated carbon filler on the composite reduced its mechanical properties. The lowest test value was shown by the composite with 4 wt%. The micrograph observations have proven that the 4 wt% composite formed agglomeration filler that can induce stress concentration and reduce its mechanical performance. Adding 1 wt% filler offered the best dispersion in the matrix, which can enhance better load transfer capability. [ABSTRACT FROM AUTHOR]

Research on natural-fiber-reinforced polymer composite is continuously developing. Natural fibers from flora have received considerable attention from researchers because their use in biobased composites is safe and sustainable for the environment. Natural fibers that mixed with Carbon Fiber and or Glass Fiber are low-cost, lightweight, and biodegradable and have lower environmental influences than metal-based materials. This study highlights and comprehensively reviews the natural fibers utilized as reinforcements in polyester composites, including jute, bamboo, sisal, kenaf, flax, and banana. The properties of composite materials consisting of natural and synthetic fibers, such as tensile strength, flexural strength, fatigue, and hardness, are investigated in this study. This paper aims to summarize, classify, and collect studies related to the latest composite hybrid science consisting of natural and synthetic fibers and their applications. Furthermore, this paper includes but is not limited to preparation, mechanism, characterization, and evaluation of hybrid composite laminates in different methods and modes. In general, natural fiber composites produce a larger volume of composite, but their strength is weaker than GFRP/CFRP even with the same number of layers. The use of synthetic fibers combined with natural fibers can provide better strength of hybrid composite. [ABSTRACT FROM AUTHOR]

• A novel lightweight GFRP-PU-Graphite powder tube was successfully manufactured. • Hybrid methods were effectively used to manufacture tubes. • Graphite filler percentages influenced material properties. • Tubes filled with 5% graphite exhibited a substantial improvement. • The hybrid tube resists expansion and chemical reactions like corrosion. This research successfully introduced an innovative lightweight tube made from lightweight PU Foam material and reinforced with glass fiber. The key findings from the tests are as follows: Glass fiber-reinforced polymer (GFRP) tubes without polyurethane (PU) foam withstood a pressure of 4.03 kN in compression testing. The specimen with 5 % graphite filler had the highest density at 0.262 g/mm3, while the specimen with 10 % graphite filler had the lowest density. The specimen with 5 % graphite filler also exhibited the highest hardness (19.5 Shore Hardness D), whereas the specimen with 20 % graphite filler had the lowest hardness (13.2 Shore Hardness D). The contraction of PU foam significantly influenced the material strength. GFRP tubes reinforced with PU foam offer advantages in terms of material lightness and improved material strength. These tubes can be applied in structural, automotive, and aerospace applications. [ABSTRACT FROM AUTHOR]