Search

Reversible scavenging, the oceanographic process by which dissolved metals exchange onto and off sinking particles and are thereby transported to deeper depths, has been well established for the metal thorium for decades. Reversible scavenging both deepens the elemental distribution of adsorptive elements and shortens their oceanic residence times in the ocean compared to nonadsorptive metals, and scavenging ultimately removes elements from the ocean via sedimentation. Thus, it is important to understand which metals undergo reversible scavenging and under what conditions. Recently, reversible scavenging has been invoked in global biogeochemical models of a range of metals including lead, iron, copper, and zinc to fit modeled data to observations of oceanic dissolved metal distributions. Nonetheless, the effects of reversible scavenging remain difficult to visualize in ocean sections of dissolved metals and to distinguish from other processes such as biological regeneration. Here, we show that particle-rich "veils" descending from high-productivity zones in the equatorial and North Pacific provide idealized illustrations of reversible scavenging of dissolved lead (Pb). A meridional section of dissolved Pb isotope ratios across the central Pacific shows that where particle concentrations are sufficiently high, such as within particle veils, vertical transport of anthropogenic surface-dissolved Pb isotope ratios toward the deep ocean is manifested as columnar isotope anomalies. Modeling of this effect shows that reversible scavenging within particle-rich waters allows anthropogenic Pb isotope ratios from the surface to penetrate ancient deep waters on timescales sufficiently rapid to overcome horizontal mixing of deep water Pb isotope ratios along abyssal isopycnals. [ABSTRACT FROM AUTHOR]

Despite the Pacific being the location of the earliest seawater Cd studies, the processes which control Cd distributions in this region remain incompletely understood, largely due to the sparsity of data. Here, we present dissolved Cd and δ114Cd data from the US GEOTRACES GP15 meridional transect along 152°W from the Alaskan margin to the equatorial Pacific. Our examination of this region's surface ocean Cd isotope systematics is consistent with previous observations, showing a stark disparity between northern Cd‐rich high‐nutrient low‐chlorophyll waters and Cd‐depleted waters of the subtropical and equatorial Pacific. Away from the margin, an open system model ably describes data in Cd‐depleted surface waters, but atmospheric inputs of isotopically light Cd likely play an important role in setting surface Cd isotope ratios (δ114Cd) at the lowest Cd concentrations. Below the surface, Southern Ocean processes and water mass mixing are the dominant control on Pacific Cd and δ114Cd distributions. Cd‐depleted Antarctic Intermediate Water has a far‐reaching effect on North Pacific intermediate waters as far as 47°N, contrasting with northern‐sourced Cd signatures in North Pacific Intermediate Water. Finally, we show that the previously identified negative Cd* signal at depth in the North Pacific is associated with the PO4 maximum and is thus a consequence of an integrated regeneration signal of Cd and PO4 at a slightly lower Cd:P ratio than the deep ocean ratio (0.35 mmol mol−1), rather than being related to in situ removal processes in low‐oxygen waters. Key Points: Atmospheric inputs of isotopically light Cd play an important role in setting surface δ114Cd when surface Cd concentrations are lowStrong Southern Ocean control on subsurface Cd and δ114Cd distribution; Antarctic Intermediate Water influences δ114Cd of North Pacific intermediate watersA Cd* minimum at depth in the North Pacific is associated with the PO4 maximum, a consequence of integrated regeneration [ABSTRACT FROM AUTHOR]

Atmospheric deposition represents a major input for micronutrient trace elements (TEs) to the surface ocean and is often quantified indirectly through measurements of aerosol TE concentrations. Sea spray aerosol (SSA) dominates aerosol mass concentration over much of the global ocean, but few studies have assessed its contribution to aerosol TE loading, which could result in overestimates of "new" TE inputs. Low‐mineral aerosol concentrations measured during the U.S. GEOTRACES Pacific Meridional Transect (GP15; 152°W, 56°N to 20°S), along with concurrent towfish sampling of surface seawater, provided an opportunity to investigate this aspect of TE biogeochemical cycling. Central Pacific Ocean surface seawater Al, V, Mn, Fe, Co, Ni, Cu, Zn, and Pb concentrations were combined with aerosol Na data to calculate a "recycled" SSA contribution to aerosol TE loading. Only vanadium was calculated to have a SSA contribution averaging >1% along the transect (mean of 1.5%). We derive scaling factors from previous studies on TE enrichments in the sea surface microlayer and in freshly produced SSA to assess the broader potential for SSA contributions to aerosol TE loading. Maximum applied scaling factors suggest that SSA could contribute significantly to the aerosol loading of some elements (notably V, Cu, and Pb), while for others (e.g., Fe and Al), SSA contributions largely remained <1%. Our study highlights that a lack of focused measurements of TEs in SSA limits our ability to quantify this component of marine aerosol loading and the associated potential for overestimating new TE inputs from atmospheric deposition. Plain Language Summary: Sea spray aerosol (SSA) generated by breaking waves and bursting bubbles can dominate the particle population in the marine atmosphere. We investigated whether this mechanism could mobilize significant amounts of trace elements (TEs)—nutrient and pollutant elements present in the surface ocean in very low concentrations. Previous studies have suggested that TEs could become enriched on SSA during its formation, relative to their concentrations in seawater, and this could make the process a more significant source for aerosol concentrations of some elements. But for others, the SSA contribution is always likely to be insignificant. Our calculations based on sea salt and TE aerosol concentrations in the atmosphere and dissolved TEs in the surface ocean suggest that SSA does not contribute significantly to total aerosol TE loading, with the possible exception of vanadium, which has relatively higher concentrations in seawater than the other elements considered. This study highlights that this process remains poorly quantified due to limited direct measurements. Key Points: Sea spray aerosol (SSA) concentration was quantified along a meridional Pacific Ocean transect during low mineral aerosol conditionsSea spray‐derived aerosol trace elements (TEs) are negligible unless significant enrichment occurs during formation; only vanadium is >1%SSA contributions to aerosol TEs of >100% calculated by applying enrichments from earlier studies suggests these are not widely applicable [ABSTRACT FROM AUTHOR]

Ocean time‐series sites are influenced by both temporal variability, as in situ conditions change, as well as spatial variability, as water masses move across the fixed observation point. To remove the effect of spatial variability, this study made sub‐daily Lagrangian observations of trace elements and isotopes (Al, Sc, Mn, Fe, Co, Ni, Cu, Zn, Cd, Pb, 232Th, and 230Th) in surface water over a 12‐day period (July–August 2015) in the North Pacific near the Hawaii Ocean Time‐series Station ALOHA. Additionally, a vertical profile in the upper 250 m was analyzed. This dataset is intercalibrated with GEOTRACES standards and provides a consistent baseline for trace element studies in the oligotrophic North Pacific. No diel changes in trace elements could be resolved, although day‐to‐day variations were resolved for some elements (Fe, Cu, and Zn), which may be related to organic matter cycling or ligand availability. Pb concentrations remained relatively constant during 1997–2015, presenting a change from previous decreases. Nutrient to trace element stoichiometric ratios were compared to those observed in phytoplankton as an indication of the extent of biological trace element utilization in this ecosystem, providing a basis for future ecological trace element studies. Key Points: A suite of 11 trace elements was analyzed in one patch of surface water at twice‐daily resolution for 12 days near Station ALOHANo diel patterns could be resolved; daily variations are suggestive of active biogeochemical cycling in this oligotrophic regionInterannual variations, in particular for Pb, and nutrient‐trace element stoichiometry with respect to prior observations was assessed [ABSTRACT FROM AUTHOR]

Melt ponds are a prominent feature of Arctic sea ice during the summer and play a role in the complex interface between the atmosphere, cryosphere and surface ocean. During melt pond formation and development, micronutrient and contaminant trace elements (TEs) from seasonally accumulated atmospheric deposition are mixed with entrained sedimentary and marine-derived material before being released to the surface ocean during sea ice melting. Here we present particulate and size-fractionated dissolved (truly soluble and colloidal) TE data from five melt ponds sampled in late summer 2015, during the US Arctic GEOTRACES (GN01) cruise. Analyses of salinity, δ 18 O, and 7 Be indicate variable contributions to the melt ponds from snowmelt, melting sea ice, and surface seawater. Our data highlight the complex TE biogeochemistry of late summer Arctic melt ponds and the variable importance of different sources for specific TEs. Dissolved TE concentrations indicate a strong influence from seawater intrusion for V, Ni, Cu, Cd, and Ba. Ultrafiltration methods reveal dissolved Fe, Zn, and Pb to be mostly colloidal (0.003–0.2 μm), while Mn, Co, Ni, Cu, and Cd are dominated by a truly soluble (<0.003 μm) fraction. Isotopically light dissolved Fe in some melt ponds suggests that photochemical and/or biologically driven redox cycling also takes place. Comparisons of particulate TE/Al ratios to mean crustal values indicate influences from lithogenic sources, including natural aerosols and/or sedimentary material, with significant enrichments for some elements, including Ni, Cu, Zn, Cd and Pb, that may result from anthropogenic aerosols, biogenic material, and/or in situ scavenging of dissolved TEs. Our results indicate that melt ponds represent a transitional environment in which some atmospherically-derived TEs undergo physical and/or chemical changes before their release to the surface ocean. As a result, the ongoing changes in sea ice areal extent, thickness, and melt season length are likely to influence the bioavailability of atmospheric TE input to the surface Arctic Ocean, with material released from snow and sea ice via melt ponds earlier in the summer and with more extensive direct deposition to the ocean surface. [ABSTRACT FROM AUTHOR]