Search

Remote sensing-based investigation of ice flow dynamics of Polar Record glacier (PRG) during December–April of 2016-2019 has been conducted in this work. Using offset tracking method on the Sentine...

A review is presented on physical oceanographic features based on expendable CTD data collected in the Indian Ocean sector of the Southern Ocean. The thermohaline structure is dominated by Circumpolar Deep Water. The temperature and salinity are affected by cyclonic circulation in the Weddell Sea and Prydz Bay. High chlorophyll-a blooms (2-4 mg m-3) evolve during austral summer due to stratification which is caused by freshwater generated from the sea ice melt and the glacial outflow which traps phytoplankton in a shallow mixed layer, where they are exposed to higher irradiances of photosynthetically active radiation. Attempts have been made to relate the physical characteristics to biomass inferred from data published from previous Indian Scientific expeditions. More in-situ observations related to biophysical and chemical are recommended in the near future projects.

Surface glacier facies are superficial expressions of a glacier that are distinguishable based on differing spectral and structural characteristics according to their age and inter-mixed impurities . Increasing bodies of literature suggest that the varying properties of surface glacier facies differentially influence the melt of the glacier, thus affecting the mass balance. Incorporating these variations into distributed mass balance modelling can improve the perceived accuracy of these models. However, detecting and subsequently mapping these facies with a high degree of accuracy is a necessary precursor to such complex modelling. The variations in the reflectance spectra of various glacier facies permit multiband imagery to exploit band ratios for their effective extraction. However, coarse and medium spatial resolution multispectral imagery can delimit the efficacy of band ratioing by muddling the minor spatial and spectral variations of a glacier. Very high-resolution imagery, on the other hand, creates distortions in the conventionally obtained information extracted through pixel-based classification. Therefore, robust and adaptable methods coupled with higher resolution data products are necessary to effectively map glacier facies. This study endeavours to identify and isolate glacier facies on two unnamed glaciers in the Chandra-Bhaga basin, Himalayas, using an established object-based multi-index protocol. Exploiting the very high resolution offered by WorldView-2 and its eight spectral bands, this study implements customized spectral index ratios via an object-based environment. Pixel-based supervised classification is also performed using three popular classifiers to comparatively gauge the classification accuracies. The object-based multi-index protocol delivered the highest overall accuracy of 86.67%. The Minimum Distance classifier yielded the lowest overall accuracy of 62.50%, whereas, the Mahalanobis Distance and Maximum Likelihood classifiers yielded overall accuracies of 77.50% and 70.84% respectively. The results outline the superiority of the object-based method for extraction of glacier facies. Forthcoming studies must refine the indices and test their applicability in wide ranging scenarios.

Glaciers play a crucial role in the study of the climate change pattern of the Earth. Remote sensing with access to large archives of data has the ability to monitor glaciers frequently throughout the year. Therefore, remote sensing is the most beneficial tool for the study of glacier dynamics. Fed by many tributaries from different sides, the Amery Ice Shelf (AIS) is one of the largest ice shelves that drains ice from the Antarctic ice sheet into the Southern Ocean. This study focuses on the eastern and the western tributaries of the AIS. The primary objective of the study was to derive the velocity of the tributary glaciers and the secondary objective was to compare variations in their velocities between the summer and winter season. This study was carried on using the European Space Agency’s (ESA) Sentinel-1 satellite’s Synthetic Aperture Radar (SAR) data acquired from the Sentinel data portal. Offset tracking method was applied to the Ground Range Detected (GRD) product of the Sentinel-1 interferometric wide (IW) swath acquisition mode. The maximum velocity in summer was observed to be around 610 m/yr in the eastern tributary glacier meeting the ice shelf near the Pickering Nunatak, and around 345 m/yr in the Charybdis Glacier Basin from the western side. The maximum velocity in the winter was observed to be 553 m/yr in the eastern side near the Pickering Nunatak whereas 323 m/yr from the western side in the Charybdis Glacier Basin. The accuracy of the derived glacier velocities was computed using bias and root mean square (RMS) error. For the analysis, the publicly available velocity datasets were used. The accuracy based on RMS error was observed to be 85-90% for both seasons with bias values up to 25 m/yr and root mean square error values up to 30 m/yr.

Significant changes in the interannual variation of Arctic snow and sea ice are connected to changes in the global climate. Retreat of ice sheets/glaciers is due to increased melting in many regions of the cryosphere. Active microwave sensors are frequently used to detect surface melting because of their sensitivity to the liquid water presence in snow/ice. We mapped the annual melt duration and summer melt onset for the Svalbard archipelago using microwave scatterometers flown on QuikSCAT, OSCAT, ASCAT, and OSCAT-2, providing one of the longest continuous records of radar backscatter to estimate snowmelt onset and melt duration on Svalbard spanning 2000–17. A single threshold-based model was used to detect the timing of snowmelt; the threshold was calculated using meteorological data from manned weather stations. The results capture the timing and extent of melt events caused by warm air temperature and precipitation, as a consequence of the influx of moist, mild air from the Norwegian and Barents seas. The highest melt duration and earlier melt onset occurred in southernmost and western Svalbard, in response to the influence of the warm West Spitsbergen Current. Compared to earlier studies, we found considerable interannual variability and regional differences. Though the record is short, there is an indication of an increasing trend in total days of melt duration and earlier summer melt onset date, possibly linked to the general warming trend. Climate indices such as Interdecadal Pacific Oscillation and Pacific Decadal Oscillation are well correlated with onset melt and duration across Svalbard. With the reported year-after-year decrease in sea ice cover over the Arctic Ocean, the trend toward longer snowmelt duration inferred from this study is expected to enhance the Arctic amplification.

Glacier movement is a crucial factor for assessing cryospheric climate change. Traditional methods of field surveys for studying glacier movement and velocity are often not possible owing to inaccessibility and harsh terrains. Furthermore, as it is not feasible to physically monitor and survey many glaciers around the globe, these traditional methods are limited in their global coverage. Remote sensing is an ideal tool to study such phenomena on a global scale. Optical remote sensing employs techniques such as feature tracking and pixel tracking, whereas, microwave remote sensing uses intensity tracking, speckle tracking, Interferometric SAR and Differential InSAR (DInSAR). This study focuses on estimation of glacier velocity and its seasonal variations using the image-matching technique for optical images for the Fisher glacier, a tributary glacier of the Amery ice shelf in Antarctica. The tool used in this study is the COSI-Corr module embedded in ENVI which provides the velocity in both azimuth and range resolution. The principle of estimating velocity using this tool is pixel tracking wherein similar pixels on two images are tracked where one is the master image and the other is a slave. This technique correlates the master and slave images over a time period and generates three outputs: displacements in the East-West and North-South directions and signal-to-noise ratio (SNR) image. Landsat 8 image pairs were used for cross correlation over a time span of four years spanning 2013–2017. With a resolution of 15 m, the panchromatic band (Band 8) was the ideal choice for pixel tracking as the resolution of other bands is coarser. The initial window size for correlation was 64 while the final window size was 16. The resolution of the displacement images produced is dependent on the value assigned for the step size, which was set to 8. The resultant velocity was derived using the result of the two displacement images. The SNR image was used to remove all the pixels from the velocity output having the value of SNR less than 0.9, in order to reduce the effect of noise. The annual velocity of the Fisher glacier was estimated to be around 600 to 650 myr−1 near the tongue where it merges with the Amery Ice Shelf, which was reduced to 150 myr−1 as it recedes. The resultant velocity images have a resolution of 120 m. The seasonal variation in velocity for the year 2013–2014 is 1.8 myr−1, while in the succeeding year 2014-2015 it subdued to 1.7 myr−1. The seasonal variation for the year 2015–2016 was estimated to be 7.9 myr−1. The seasonal variation for 2016–2017 was 17.4 myr−1.

Using the Expendable CTDs (XCTDs) collected along two transects between Africa and Antarctica during 1–11 January (Cape Town−Prydz Bay, track-2) and 12-21 April 2018 (Prydz Bay−Cape Town, track-1), frontal locations are delineated and compared with the satellite-based maps of absolute dynamic topography (MADT). The MADT maps revealed that the intensity of the Agulhas Current (AC) was 1.3 ms−1 during both periods; the southernmost limit of the Agulhas Retroflection (AR) was traced to 40°S, 20.5°E/42°S, 15°E on track-1/track-2. The vertical sections of temperature and salinity revealed the Agulhas anticyclonic eddy (AAE) whose core was detected at ~38.4°S/~37.6°S on track-1/track-2. The cumulative transport across track-2 was 50% higher than across track-1 which is attributed to deep-sea upwelling and its subsequent transport across the track-2 to the south of 50°S. On both transects, the winter water was detected up to 50°S in the upper 100 m. The highest AC transport in the upper 1000 m was detected at 37.75°S/38.28°S on track-1/track-2, which was related to the flow characteristics of the AC. The eddies that detached from the AC system transported nutrient-rich water southward which mixed with the ambient water resulting in peak chlorophyll-a concentration (Chl-a) exceeding 0.5 mg/m3 to the north of 42°S on both tracks. The shallow topographic features such as the Ob-Lena rise (54°S) and the southwest Indian Ridge (44°−46°S) also enhanced Chl-a by 39% on track-2.

Mapping of surface glacier facies has been a part of several glaciological applications. The study of glacier facies in the Himalayas has gained momentum in the last decade owing to the implications imposed by these facies on the melt characteristics of the glaciers. Some of the most commonly reported surface facies in the Himalayas are snow, ice, ice mixed debris, and debris. The precision of the techniques used to extract glacier facies is of high importance, as the result of many cryospheric studies and economic reforms rely on it. An assessment of a customized semi-automated protocol against conventional and advanced mapping algorithms for mapping glacier surface facies is presented in this study. Customized spectral index ratios (SIRs) are developed for effective extraction of surface facies using thresholding in an object-based environment. This method was then tested on conventional and advanced classification algorithms for an evaluation of the mapping accuracy for five glaciers located in the Himalayas, using very high-resolution WorldView-2 imagery. The results indicate that the object-based image analysis (OBIA) based semi-automated SIR approach achieved a higher average overall accuracy of 87.33% (κ = 0.85) than the pixel-based image analysis (PBIA) approach. Among the conventional methods, the Maximum Likelihood performed the best, with an overall accuracy of 78.71% (κ = 0.75). The Constrained Energy Minimization, with an overall accuracy of 68.76% (κ = 0.63), was the best performer of the advanced algorithms. The advanced methods greatly underperformed in this study. The proposed SIRs show a promise in the mapping of minor features such as crevasses and in the discrimination between ice-mixed debris and debris. We have efficiently mapped surface glacier facies independently of short-wave infrared bands (SWIR). There is a scope for the transferability of the proposed SIRs and their performance in varying scenarios.

The study explores modes of variability in the Southern Polar Cell and their relationship with known global climate modes and Antarctic sea ice. It is found that Polar Cell is barotropic in nature and 500 hPa geo-potential height (Z500) field can satisfactorily represent variability in the Polar Cell. First, three leading Empirical Orthogonal Function (EOF) modes of Z500 account for nearly 80% of observed variability in the Polar Cell. Dominant mode (PC1500) comprises of high pressure divergence zone over Antarctica. Second leading mode (PC2500) is low pressure zone covering Amundsen-Bellingshausen Sea (ABS) similar to ABS low feature. A new climate mode called Polar Coastal Index (PCI) is defined, which describes more than 15% and close to 30% variability of circumpolar trough and ABS low, respectively. Out of four modes defined in this study, only PCI and PC2500 show linear trends and clear seasonality. Interestingly, both modes are affected by modulation of ABS low due to tropical ENSO forcing. SAM signature is present in Polar Cell as PC1500 shares large variance with it. The largest impact on sea ice comes from PC2500 followed by PC1500 in the Antarctic Dipole regions. However, this study suggests contemporary sea ice trends cannot be sustained, and can reverse given that trends in PCI and PC2500 favour a reversal. These results indicate that ENSO-driven Polar Cell variability plays a crucial role influencing Antarctic sea ice as it interacts with other climate modes and leads the combined impact at the interannual time scale.

Iceberg calving is the detachment of ice from ice shelves or glaciers. Although calving is a natural phenomenon, an abnormal rate of calving can be a threat to ice shelves. Some of the events were so large, that an iceberg of approximately 150 × 50 km area was calved in a single event. The most recent reported iceberg calving event was Larsen C and it took place in July 2017. In addition to the large and widely reported calving events, there are several small calving events, which are also of great significance and contribute to the overall mass loss from Antarctica. This study focuses on small calving events in Antarctica along various coasts. Three calving events are studied here, all of them have occurred in the past. This study was performed using Google Earth and Landsat satellite imageries. The first event is identified to have occurred at the Knox coast in 2016. Even after the icebergs were calved, they remained intact with the ice shelf due to ice fronts. The second event took place at the Queen Mary Coast in the year 2014. This event was studied from 2009 to 2016 using Landsat satellite images and many rifts were observed. The third event took place at the Princess Astrid Coast in the year 2016. This event was monitored from 2014 and three icebergs were calved between the years 2014 to 2016. This study emphasizes the exploitation of optical satellite data for studying calving events in Antarctica. Various crevasses and rifts are observed on Landsat imageries, which can be the first sign of a calving process.

Changes in the dynamics of glaciers must be assessed, as they are important for sea level changes. Glacier velocity is the most important parameter used in glacier dynamics studies. Various image matching techniques, which are implemented in different domains, have been utilized to estimate the surface velocity of glaciers, since the first use of remote sensing technology. In this study, we derived the precise velocity of the Polar Record Glacier (PRG), east Antarctica, in recent years, using optical remote sensing. The secondary objective of the study was to comparatively test the accurate geospatial tools for velocity estimation. The study was first conducted on a single image pair, and four different tools were used for the estimation of the glacier velocity, which are the COSI-Corr (Co-registration of Optically Sensed Images and Correlation) tool in ENVI (Exelis Visual Information Solutions), the IMGRAFT (Image GeoRectification and Feature Tracking) in MATLAB, the IMCORR (Image correlation) feature tracking tool in SAGA-GIS, and the image correlation software CIAS. After evaluation of the four feature tracking tools, COSI-Corr yielded a pixel-level velocity with both magnitude and directions, while IMGRAFT provided the glacier speed without the directions. On the other hand, IMCORR yielded good results with respect to magnitude and directions of the glacier velocity, but the pixel-wise magnitude was not produced. CIAS also provided closely bundled velocity products without pixel-wise velocity. COSI-Corr and IMGRAFT were found to be the best of the four tools, and COSI-Corr is recommended for further studies to estimate the velocity of the PRG.

The ice flow velocity is a critical variable in understanding the glacier dynamics. The Synthetic Aperture Radar Interferometry (InSAR) is a robust technique to monitor Earth’s surface mainly to measure its topography and deformation. The phase information from two or more interferogram further helps to extract information about the height and displacement of the surface. We used this technique to derive glacier velocity for Polar Record Glacier (PRG), East Antarctica, using Sentinel-1 Single Look Complex images that were captured in Interferometric Wide mode. For velocity estimation, Persistent Scatterer interferometry (PS-InSAR) method was applied, which uses the time coherent of permanent pixel of master images and correlates to the same pixel of the slave image to get displacement by tracking the intensity of those pixels. C-band sensor of European Space Agency, Sentinel-1A, and 1B data were used in this study. Estimated average velocity of the PRG is found to be approximately ≈400 ma−1, which varied from ≈100 to ≈700 ma−1. We also found that PRG moves at ≈700 and 200 ma−1 in the lower part and the upper inland area, respectively.

Glaciers exhibit a wide range of surface facies that can be analyzed as proxies for mass balance studies. Along with hydrological implications, these are in turn quintessential indicators of climate change. Moderate-to-high-resolution (MHR) data for mapping glacier facies have been used previously; however, the use of very high-resolution (VHR) data for this purpose has not yet been fully exploited. This study uses WorldView-2 (WV-2) VHR data to classify available glacier surface facies on the Samudra Tapu glacier, located in the Himalayas. Traditional methods of facies classification using conventional multispectral data involve band rationing and/or supervised classification. This study explores glacier surface facies classification by using the unique bands available in the multispectral range of WV-2 to develop customized spectral index ratios (SIRs) within an object-oriented domain. The results of this object-oriented classification (OOC) are then compared with five popular supervised classification algorithms using error matrices to determine the classification accuracies. The overall accuracy achieved by the object-based image analysis (OBIA) approach is 97.14% (κ = 0.96), and the highest overall accuracy among the pixel-based classification methods is 74.28% (κ = 0.70). The present results show that the object-based approach is far more accurate than the pixel-based classification techniques. Further studies should test the robustness of the object-oriented domain for the classification of glacier surface facies using customized sensor-specific as well as transferable indices, and the resultant accuracies.

Bathymetry is a technique of measuring depths to determine the topography of water bodies. The derivation of bathymetry from satellite imagery is one of the basic researches in remote sensing of the aquatic environment, which has several practical implications to the coastal environment and it's monitoring. The spectral band information provided by the multispectral (eight bands) Worldview-2 (WV-2) satellite improves the quality of coastal environmental products including bathymetry. This study provides a method for mapping of shallow lake bathymetry (depth) in Larsemann hills, eastern Antarctica, using digital WV-2 imagery. Out of various bathymetry determination models available for multispectral images, two most popular models- linear band and linear ratio model were used to estimate water depth of the shallow water bodies. These models were executed using various band combinations to study their specific role in bathymetry derivation. The derived depths were validated against the in-situ measurements and root mean square errors (RMSE) were computed. We quantify the error between in-situ measured and satellite-estimated lake depth values for lakes selected in this study. Our results indicate the high correlation (0.7∼0.9) between estimated and in situ depth measurements, with RMSE ranging from 0.2 to 1 m. This study suggests that the coastal band in the WV-2 imagery could retrieve accurate bathymetry information compared to other bands.

The cryosphere is the frozen part of the Earth’s system. Snow and ice are the main constituents of the cryosphere and may be found in different states, such as snow, freshwater ice, sea ice, perma-frost, and continental ice masses in the form of glaciers and ice sheets. The present review mainly deals with state-of-the-art applications of synthetic aperture radar (SAR) with a special emphasize on cryospheric information extraction. SAR is the most important active microwave remote sensing (RS) instrument for ice monitoring, which provides high-resolution images of the Earth’s surface. SAR is an ideal sensor in RS technology, which works in all-weather and day and night conditions to provide useful unprecedented information, especially in the cryospheric regions which are almost inaccessible areas on Earth. This paper addresses the technological evolution of SAR and its applications in studying the various components of the cryosphere. The arrival of SAR radically changed the capabilities of information extraction related to ice type, new ice formation, and ice thickness. SAR applications can be divided into two broad classes-polarimetric applications and interferometric applications. Polarimetric SAR has been effectively used for mapping calving fronts, crevasses, surface structures, sea ice, detection of icebergs, etc. The paper also summarizes both the operational and climate change research by using SAR for sea ice parameter detection. Digital elevation model (DEM) generation and glacier velocity mapping are the two most important applications used in cryosphere using SAR interferometry or interferometric SAR (InSAR). Space-borne InSAR techniques for measuring ice flow velocity and topography have developed rapidly over the last decade. InSAR is capable of measuring ice motion that has radically changed the science of glaciers and ice sheets. Measurement of temperate glacier velocities and surface characteristics by using airborne and space-borne interferometric satellite images have been the significant application in glaciology and cryospheric studies. Space-borne InSAR has contributed to major evolution in many research areas of glaciological study by measuring ice-stream flow velocity, improving understanding of ice-shelf processes, yielding velocity for flux-gate based mass-balance assessment, and mapping flow of mountain glaciers. The present review summarizes the salient development of SAR applications in cryosphere and glaciology.

Antarctic coastal oases are essential sources of spatially distributed fresh water bodies. Mapping water bodies from remote places, such as polar regions, using traditional surveying method is a laborious and logistically expensive task. A rapid method for extracting and monitoring water bodies in Antarctic coastal oases has a tremendous application in remote sensing. This study discusses the design of a rapid and novel method to extract water body features in Antarctic coastal oasis environment from remotely-sensed images. We devised semiautomatic approach for extracting water body features based on a novel set of normalized difference water index (NDWI) by incorporating high-resolution WorldView-2 (WV-2) panchromatic and multispectral image data. This study highlights and compares the viability of state-of-the-art spectral processing water body extraction approaches with the newly designed NDWI approach. An extensive quantitative evaluation was carried out to test the newly designed NDWI approach for extracting water bodies on Larsemann Hills, eastern Antarctica. The results suggest that the modified NDWI approach render intermediate performance with bias error varying from ∼1 to ∼34 m2 (least amount of misclassified pixels). We also analyzed the distinctive 8-band capability of WV-2 data coupled with semiautomatic extraction methods to compare their reliability in extracting the water body area. The results indicate that the use of the modified NDWI approach on 8-band WV-2 data can significantly improve the semiautomatic extraction of water body features, which can ultimately contribute to an enhanced perceptive of the Antarctic coastal oasis in the context of climate change.

We introduce a new semi-automated approach by coupling spectral index ratios (SIR) and object-based image analysis (OBIA) to classify very high resolution WorldView 2 (WV 2) satellite image to extract land cover features using eCognition© software. This study aims to develop rule sets for object-based classification of WV-2 image to accurately delineate the boundaries of land cover features in the Larsemann Hills, eastern Antarctica. Multi-level segmentation process was applied to WV-2 image to generate different sizes of image objects representing different land cover features with respect to scale parameter. Several new SIRs were investigated and applied to objects at different segmentation levels to accurately classify land cover classes of landmass, man-made features, snow/ice, and water bodies. A specific attention was given to water body class to identify water areas in image level considering their different appearance on landmass and ice. The results illustrate that synergetic usage of newly developed SIRs and image segmentation in the OBIA can provide highly accurate identification of land cover classes with an overall classification accuracy of ≈98%. Furthermore, our results suggest that OBIA can contribute to powerful automatic and semiautomatic analysis for most remote sensing applications in coastal Antarctica, and synergetic use of pixel-based SIRs explores the rich geo-information of coastal areas.

This work uses the canopy height model (CHM) based workflow for individual tree crown delineation and 3D feature extraction approach (Overwatch Geospatial's proprietary algorithm) for building feature delineation from high-density light detection and ranging (LiDAR) point cloud data in an urban environment and evaluates its accuracy by using very high-resolution panchromatic (PAN) (spatial) and 8-band (multispectral) WorldView-2 (WV-2) imagery. LiDAR point cloud data over San Francisco, California, USA, recorded in June 2010, was used to detect tree and building features by classifying point elevation values. The workflow employed includes resampling of LiDAR point cloud to generate a raster surface or digital terrain model (DTM), generation of a hill-shade image and an intensity image, extraction of digital surface model, generation of bare earth digital elevation model (DEM) and extraction of tree and building features. First, the optical WV-2 data and the LiDAR intensity image were co-registered using ground control points (GCPs). The WV-2 rational polynomial coefficients model (RPC) was executed in ERDAS Leica Photogrammetry Suite (LPS) using supplementary *.RPB file. In the second stage, ortho-rectification was carried out using ERDAS LPS by incorporating well-distributed GCPs. The root mean square error (RMSE) for the WV-2 was estimated to be 0.25 m by using more than 10 well-distributed GCPs. In the second stage, we generated the bare earth DEM from LiDAR point cloud data. In most of the cases, bare earth DEM does not represent true ground elevation. Hence, the model was edited to get the most accurate DEM/ DTM possible and normalized the LiDAR point cloud data based on DTM in order to reduce the effect of undulating terrain. We normalized the vegetation point cloud values by subtracting the ground points (DEM) from the LiDAR point cloud. A normalized digital surface model (nDSM) or CHM was calculated from the LiDAR data by subtracting the DEM from the DSM. The CHM or the normalized DSM represents the absolute height of all aboveground urban features relative to the ground. After normalization, the elevation value of a point indicates the height from the ground to the point. The above-ground points were used for tree feature and building footprint extraction. In individual tree extraction, first and last return point clouds were used along with the bare earth and building footprint models discussed above. In this study, scene dependent extraction criteria were employed to improve the 3D feature extraction process. LiDAR-based refining/ filtering techniques used for bare earth layer extraction were crucial for improving the subsequent 3D features (tree and building) feature extraction. The PAN-sharpened WV-2 image (with 0.5 m spatial resolution) was used to assess the accuracy of LiDAR-based 3D feature extraction. Our analysis provided an accuracy of 98 % for tree feature extraction and 96 % for building feature extraction from LiDAR data. This study could extract total of 15143 tree features using CHM method, out of which total of 14841 were visually interpreted on PAN-sharpened WV-2 image data. The extracted tree features included both shadowed (total 13830) and non-shadowed (total 1011). We note that CHM method could overestimate total of 302 tree features, which were not observed on the WV-2 image. One of the potential sources for tree feature overestimation was observed in case of those tree features which were adjacent to buildings. In case of building feature extraction, the algorithm could extract total of 6117 building features which were interpreted on WV-2 image, even capturing buildings under the trees (total 605) and buildings under shadow (total 112). Overestimation of tree and building features was observed to be limiting factor in 3D feature extraction process. This is due to the incorrect filtering of point cloud in these areas. One of the potential sources of overestimation was the man-made structures, including skyscrapers and bridges, which were confounded and extracted as buildings. This can be attributed to low point density at building edges and on flat roofs or occlusions due to which LiDAR cannot give as much precise planimetric accuracy as photogrammetric techniques (in segmentation) and lack of optimum use of textural information as well as contextual information (especially at walls which are away from roof) in automatic extraction algorithm. In addition, there were no separate classes for bridges or the features lying inside the water and multiple water height levels were also not considered. Based on these inferences, we conclude that the LiDAR-based 3D feature extraction supplemented by high resolution satellite data is a potential application which can be used for understanding and characterization of urban setup.

Available digital elevation models (DEMs) of Antarctic region generated by using radar altimetry and the Antarctic digital database (ADD) indicate elevation variations of up to hundreds of meters, which necessitates the generation of local DEM and its validation by using ground reference. An enhanced digital elevation model (eDEM) of the Schirmacher oasis region, east Antarctica, is generated synergistically by using Cartosat-1 stereo pair-derived photogrammetric DEM (CartoDEM)-based point elevation dataset and multitemporal radarsat Antarctic mapping project version 2 (RAMPv2) DEM-based point elevation dataset. In this study, we analyzed suite of interpolation techniques for constructing a DEM from RAMPv2 and CartoDEM-based point elevation datasets, in order to determine the level of confidence with which the interpolation techniques can generate a better interpolated continuous surface, and eventually improves the elevation accuracy of DEM from synergistically fused RAMPv2 and CartoDEM point elevation datasets. RAMPv2 points and CartoDEM points were used as primary data for various interpolation techniques such as ordinary kriging (OK), simple kriging (SK), universal kriging (UK), disjunctive kriging (DK) techniques, inverse distance weighted (IDW), global polynomial (GP) with power 1 and 2, local polynomial (LP) and radial basis functions (RBF). Cokriging of 2 variables with second dataset was used for ordinary cokriging (OCoK), simple cokriging (SCoK), universal cokriging (UCoK) and disjunctive cokriging (DCoK). The IDW, GP, LP, RBF, and kriging methods were applied to one variable, while Cokriging experiments were employed on two variables. The experiment of dataset and its combination produced two types of point elevation map categorized as (1) one variable (RAMPv2 Point maps and CartoDEM Point maps) and (2) two variables (RAMPv2 Point maps + CartoDEM Point maps). Interpolated surfaces were evaluated with the help of differential global positioning system (DGPS) points collected from study area during the Indian Scientific Expedition to Antarctic (ISEA). Accuracy assessment of the RAMPv2 DEM, CartoDEM, and combined eDEM (RAMPv2 + CartoDEM) by using DGPS as ground reference data shows that eDEM achieves much better accuracy (average elevation error 8.44 m) than that of existing DEM constructed by using only CartoDEM (13.57 m) or RAMPv2 (41.44 m) alone. The newly constructed eDEM achieves a vertical accuracy of about 7 times better than RAMPv2 DEM and 1.5 times better than CartoDEM. After using accurate DGPS data for accuracy assessment, the approximation to the actual surface of the eDEM extracted here is much more accurate with least mean root mean square error (RMSE) of 9.22 m than that constructed by using only CartoDEM (RMSE = 14.15 m) point elevation data and RAMPv2 (RMSE = 69.48 m) point elevation data. Our results indicate that, the overall trend of accuracy for the interpolation methods for generating continuous elevation surface from CartoDEM + RAMPv2 point elevation data, based on RMSE, is as follows: GP1 > IDW > GP2 > OK > LP2 > DK > LP1 > RBF > SK > UK. In case of cokriging interpolation methods, OCoK yields more accurate eDEM with the least RMSE of 8.16 m, which can be utilized to generate a highly accurate DEM of the research area.. Based on this work, it is inferred that GP2 and OCok interpolation methods and synergistic use of RAMPv2 and CartoDEM-based point elevation datasets lead to a highly accurate DEM of the study region. This research experiment demonstrates the stability (w.r.t multi-temporal datasets), performance (w.r.t best interpolation technique) and consistency (w.r.t all the experimented interpolation techniques) of synergistically fused eDEM. On the basis of average elevation difference and RMSE mentioned in present research, the newly constructed eDEM may serve as a benchmark for future elevation models such as from the ICESAT-II mission to spatially monitor ice sheet elevation.

This study presents an operational case of advancements in urban land cover classification and change detection by using very high resolution spatial and multispectral information from 4-band QuickBird (QB) and 8-band WorldView-2 (WV-2) image sequence. Our study accentuates quantitative, pixel based, image difference approach for operational change detection using very high resolution pansharpened QB and WV-2 images captured over San Francisco city, California, USA (37° 44" 30N', 122° 31" 30' W and 37° 41" 30° N ,122° 20" 30' W). In addition to standard QB image, we compiled three multiband images from eight pansharpened WV-2 bands: (1) multiband image from four traditional spectral bands, i.e., Blue, Green, Red and near-infrared 1 (NIR1) (henceforth referred as "QB equivalent WV-2"), (2) multiband image from four new spectral bands, i.e., Coastal, Yellow, Red Edge and NIR2 (henceforth referred as "new band WV-2"), and (3) multiband image consisting of four traditional and four new bands (henceforth referred as "standard WV-2"). All the four multiband images were classified using support vector machine (SVM) classifier into four most abundant land cover classes, viz, hard surface, vegetation, water and shadow. The assessment of classification accuracy was performed using random selection of 356 test points. Land cover classifications on "standard QB" image (kappa coeffiecient, κ = 0.93), "QB equivalent WV-2" image (κ = 0.97), and "new band WV-2" image (κ = 0.97) yielded overall accuracies of 96.31 %, 98.03 % and 98.31 %, respectively, while "standard WV-2" image (κ = 0.99) yielded an improved overall accuracy of 99.18 %. It is concluded that the addition of four new spectral bands to the existing four traditional bands improved the discrimination of land cover targets, due to increase in the spectral characteristics of WV-2 satellite. Consequently, to test the validity of improvement in classification process for implementation in operational change detection application, comparative assessment of transition of various landcover classes in three WV-2 images with respect to "standard QB" image was carried out using image difference method. As far as waterbody class is concerned, there was no significant transition observed in all the three WorldView-2 Images, whereas, hard surface class showed lowest transition in "standard WV-2" image and highest in case of "new band WV-2". The most significant transition was occurred in vegetation class in all of the three images, showing positive change (increase) in standard WV-2 image (0.31 Sq. Km) and negative change (decrease) in other two images (−0.12 Sq. Km for "QB equivalent WV-2" image and −31.15 Sq. Km in "new band WV-2" image) with considerable amount. Similar case was observed with the shadow class, but the difference is, transition from shadow to other classes was negative in all the three WV-2 images which can be attributed to the fact that, "standard QB" image had more shadow area (based on acquisition time and sun position) than WV-2, that means all the band combinations of WV-2 succeeded in extracting the features hidden below the shadow in "standard QB" image. These trends indicate that the overall bandwise transition in landcover classes in case of "standard WV-2" is more precise than other two images. We note that "QB equivalent WV-2" image had narrower band widths than those of "standard QB" image but the observed vegetation change is not prominent as in case of other two images, but at the same time, transition in hard surface and waterbody was discerned more efficiently than "new band WV-2" image. The addition of new bands in WV-2 enabled more effective vegetation analysis, so the vegetation transition results shown by "new band WV-2" image were at par with the "standard WV-2" image, showing the importance of these newly added bands in the WV-2 imagery, with comparatively lower transitions in other classes. In a nutshell, it can be claimed that incorporation of new bands along with even narrower Red, Green, Blue and Near Infrared-1 bands in WV-2 image holds remarkable importance which leads to enhancement in the potential of WV-2 imagery in change detection and other feature extraction studies.

We devised a semiautomatic approach for extracting lake features based on a customized set of normalized difference water index (NDWI) information which was obtained by incorporating high resolution, 8-band WorldView-2 data. An extensive accuracy assessment was carried out for three semiautomatic feature extraction approaches for extracting 36 lake features on Larsemann Hills, Antarctica. The method was tested on five existing PAN-sharpening algorithms, which suggest that the customized NDWI approach renders intermediate performance (root mean square error varies from ~227 to ~235 m 2 ) and highest stability when compared with existing feature extraction techniques. In general, the customized NDWI rendered a least misclassification ( ≈11 percent), followed by target detection (≈16 percent) and spectral processing (≈17 percent) methods for extraction of 36 lakes. We also found that customized NDWI caused consistently least misclassification ( ≈21 percent) than the target detection (≈23 percent) and spectral processing (≈30 percent) methods for extraction of partially snow or ice-covered 11 lakes. Our results indicate that the use of the customized NDWI approach and appropriate PANsharpening algorithm can greatly improve the semiautomatic extraction of lake features in cryospheric environment.

Evolution of remote sensing sensors technologies is presented, with emphasis on its suitability in observing the polar regions. The extent of influence of polar regions on the global climate and vice versa is the spearhead of climate change research. The extensive cover of sea ice has major impacts on the atmosphere, oceans, and terrestrial and marine ecosystems of the polar regions in particular and teleconnection on other processes elsewhere. Sea ice covers vast areas of the polar oceans, ranging from ~18 × 106 km2 to ~23 × 106 km2, combined for the Northern and Southern Hemispheres. However, both polar regions are witnessing contrasting rather contradicting effects of climate change. The Arctic sea ice extent is declining at a rate of 0.53 × 106 km2·decade–1, whereasAntarcticaexhibits a positive trend at the rate of 0.167 × 106 km2·decade–1. This work reviews literature published in the field of sea ice remote sensing, to evaluate and access success and failures of different sensors to observe physical features of sea ice. The chronological development series of different sensors on different satellite systems, sensor specifications and datasets are examined and how they have evolved to meet the growing needs of users is outlined. Different remote sensing technology and observational methods and their suitability to observe specific sea ice property are also discussed. A pattern has emerged, which shows that microwave sensors are inherently superior to visible and infrared in monitoring seasonal and annual changes in sea ice. Degree of successes achieved through remote sensing techniques by various investigators has been compared. Some technologies appear to work better under certain conditions than others, and it is now well accepted that there is no algorithm that is ideal globally. Contribution of Indian remote sensing satellites is also reviewed in the context of polar research. This review suggests different primary datasets for further research on sea ice features (sea ice extent, ice type, sea ice thickness, etc.). This work also examines past achievements and how far these capabilities have evolved and tap into current state of art/direction of sensor technologies. Effective monitoring and syntheses of past few decades of research pinpoint useful datasets for sea ice monitoring, thereby avoiding wastage of resources to find practical datasets to monitor these physically inaccessible regions.

Anthropogenic warming of near-surface atmosphere in the last 50 years is dominant over the west Antarctic Peninsula. Ozone depletion has led to partly cooling of the stratosphere. The positive polarity of the Southern Hemisphere Annular Mode (SAM) index and its enhancement over the past 50 years have intensified the westerlies over the Southern Ocean, and induced warming of Antarctic Peninsula. Dictated by local ocean-atmosphere processes and remote forcing, the Antarctic sea ice extent is increasing, contrary to climate model predictions for the 21st century, and this increase has strong regional and seasonal signatures. Models incorporating doubling of present day CO2 predict warming of the Antarctic sea ice zone, a reduction in sea ice cover, and warming of the Antarctic Plateau, accompanied by increased snowfall.

This work presents various normalized difference water indices (NDWI) to delineate lakes from Schirmacher Oasis, East Antarctica, by using a very high resolution WorldView-2 (WV-2) satellite imagery. Schirmacher oasis region hosts a number of fresh as well as saline water lakes, such as epishelf lakes, ice-free or landlocked lakes, which are completely frozen or semi-frozen and in a ice-free state. Hence, detecting all these types of lakes distinctly on satellite imagery was the major challenge, as the spectral characteristics of various types of lakes were identical to the other land cover targets. Multiband spectral index pixel-based approach is most experimented and recently growing technique because of its unbeatable advantages such as its simplicity and comparatively lesser amount of processing-time. In present study, semiautomatic extraction of lakes in cryospheric region was carried out by designing specific spectral indices. The study utilized number of existing spectral indices to extract lakes but none could deliver satisfactory results and hence we modified NDWI. The potentials of newly added bands in WV-2 satellite imagery was explored by developing spectral indices comprising of Yellow (585 – 625 nm) band, in combination with Blue (450 – 510 nm), Coastal (400 – 450 nm) and Green (510 – 580 nm) bands. For extraction of frozen lakes, use of Yellow (585 – 625 nm) and near-infrared 2 (NIR2) band pair, and Yellow and Green band pair worked well, whereas for ice-free lakes extraction, a combination of Blue and Coastal band yielded appreciable results, when compared with manually digitized data. The results suggest that the modified NDWI approach rendered bias error varying from ~1 to ~34 m 2 .

High-resolution pansharpened images from WorldView-2 were used for bathymetric mapping around Larsemann Hills and Schirmacher oasis, east Antarctica. We digitized the lake features in which all the lakes from both the study areas were manually extracted. In order to extract the bathymetry values from multispectral imagery we used two different models: (a) Stumpf model and (b) Lyzenga model. Multiband image combinations were used to improve the results of bathymetric information extraction. The derived depths were validated against the in-situ measurements and root mean square error (RMSE) was computed. We also quantified the error between in-situ and satellite-estimated lake depth values. Our results indicated a high correlation (R = 0.60~0.80) between estimated depth and in-situ depth measurements, with RMSE ranging from 0.10 to 1.30 m. This study suggests that the coastal blue band in the WV-2 imagery could retrieve accurate bathymetry information compared to other bands. To test the effect of size and dimension of lake on bathymetry retrieval, we distributed all the lakes on the basis of size and depth (reference data), as some of the lakes were open, some were semi frozen and others were completely frozen. Several tests were performed on open lakes on the basis of size and depth. Based on depth, very shallow lakes provided better correlation (≈ 0.89) compared to shallow (≈ 0.67) and deep lakes (≈ 0.48). Based on size, large lakes yielded better correlation in comparison to medium and small lakes.

A robust monitoring of the changes in the distribution and density of cryospheric plant species requires accurate and high-resolution baseline maps of vegetation. Mapping such change at the landscape scale is often problematic, particularly in remote areas, such as Antarctica. Vegetation mapping of plant communities at fine spatial scales is increasingly supported by remote sensing technology in cryospheric regions. Less frequent imaging with high spatial resolution satellite sensors enable more detailed analyses of vegetation change frequently. This study is the first to use high-resolution WorldView-2 (WV-2) imagery to classify vegetation communities on Antarctic oases and to provide semi-automated means to map vegetation, as an imperative indicator for environmental change. Multispectral imagery (MSI) and panchromatic imagery (PAN) from very high resolution WV-2 have been used for mapping of vegetation in different forms in Antarctic environment. A range of supervised classification methods have been executed using pan-sharpened WV-2 data. This study comparatively and statistically evaluates vegetation mapping results using supervised and unsupervised classification methods to extract vegetation in Larsemann Hills and Schirmacher oasis, east Antarctica. We also discuss on the use of supervised pixel-based classifiers and textural measures, in addition to standard multispectral information, to improve the classification of Antarctic vegetation communities. Classification results were validated with independent reference datasets. This work indicates that the overall accuracy of mapping vegetation using WV-2 imagery and semi-automated target extraction methods ranged from 90% to 94%.

Digital elevation model (DEM) is indispensable for analysis such as topographic feature extraction, ice sheet melting, slope stability analysis, landscape analysis and so on. Such analysis requires a highly accurate DEM. Available DEMs of Antarctic region compiled by using radar altimetry and the Antarctic digital database indicate elevation variations of up to hundreds of meters, which necessitates the generation of local improved DEM. An improved DEM of the Schirmacher Oasis, East Antarctica has been generated by synergistically fusing satellite-derived laser altimetry data from Geoscience Laser Altimetry System (GLAS), Radarsat Antarctic Mapping Project (RAMP) elevation data and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) global elevation data (GDEM). This is a characteristic attempt to generate a DEM of any part of Antarctica by fusing multiple elevation datasets, which is essential to model the ice elevation change and address the ice mass balance. We analyzed a suite of interpolation techniques for constructing a DEM from GLAS, RAMP and ASTER DEM-based point elevation datasets, in order to determine the level of confidence with which the interpolation techniques can generate a better interpolated continuous surface, and eventually improve the elevation accuracy of DEM from synergistically fused RAMP, GLAS and ASTER point elevation datasets. The DEM presented in this work has a vertical accuracy (≈ 23 m) better than RAMP DEM (≈ 57 m) and ASTER DEM (≈ 64 m) individually. The RAMP DEM and ASTER DEM elevations were corrected using differential GPS elevations as ground reference data, and the accuracy obtained after fusing multitemporal datasets is found to be improved than that of existing DEMs constructed by using RAMP or ASTER alone. This is our second attempt of fusing multitemporal, multisensory and multisource elevation data to generate a DEM of Antarctica, in order to address the ice elevation change and address the ice mass balance. Our approach focuses on the strengths of each elevation data source to produce an accurate elevation model.

Supraglacial debris was mapped in the Schirmacher Oasis, east Antarctica, by using WorldView-2 (WV-2) high resolution optical remote sensing data consisting of 8-band calibrated Gram Schmidt (GS)-sharpened and atmospherically corrected WV-2 imagery. This study is a preliminary attempt to develop an object-oriented rule set to extract supraglacial debris for Antarctic region using 8-spectral band imagery. Supraglacial debris was manually digitized from the satellite imagery to generate the ground reference data. Several trials were performed using few existing traditional pixel-based classification techniques and color-texture based object-oriented classification methods to extract supraglacial debris over a small domain of the study area. Multi-level segmentation and attributes such as scale, shape, size, compactness along with spectral information from the data were used for developing the rule set. The quantitative analysis of error was carried out against the manually digitized reference data to test the practicability of our approach over the traditional pixel-based methods. Our results indicate that OBIA-based approach (overall accuracy: 93%) for extracting supraglacial debris performed better than all the traditional pixel-based methods (overall accuracy: 80−85%). The present attempt provides a comprehensive improved method for semiautomatic feature extraction in supraglacial environment and a new direction in the cryospheric research.

Cryospheric surface feature classification is one of the widely used applications in the field of polar remote sensing. Precise surface feature maps derived from remotely sensed imageries are the major requirement for many geoscientific applications in polar regions. The present study explores the capabilities of C-band dual polarimetric (HH & HV) SAR imagery from Indian Radar Imaging Satellite (RISAT-1) for land cryospheric surface feature mapping. The study areas selected for the present task were Larsemann Hills and Schirmacher Oasis, East Antarctica. RISAT-1 Fine Resolution STRIPMAP (FRS-1) mode data with 3-m spatial resolution was used in the present research attempt. In order to provide additional context to the amount of information in dual polarized RISAT-1 SAR data, a band HH+HV was introduced to make use of the original two polarizations. In addition to the data calibration, transformed divergence (TD) procedure was performed for class separability analysis to evaluate the quality of the statistics before image classification. For most of the class pairs the TD values were comparable, which indicated that the classes have good separability. Fuzzy and Artificial Neural Network classifiers were implemented and accuracy was checked. Nonparametric classifier Support Vector Machine (SVM) was also used to classify RISAT-1 data with an optimized polarization combination into three land-cover classes consisting of sea ice/snow/ice, rocks/landmass, and lakes/waterbodies. This study demonstrates that C-band FRS1 image mode data from the RISAT-1 mission can be exploited to identify, map and monitor land cover features in the polar regions, even during dark winter period. For better landcover classification and analysis, hybrid polarimetric data (cFRS-1 mode) from RISAT-1, which incorporates phase information, unlike the dual-pol linear (HH, HV) can be used for obtaining better polarization signatures.

Current research study emphasizes the importance of advanced digital image processing methods in order to delineate between various LULC features. In the case of the Antarctica, the present LC (snow/ice, landmass, water, vegetation etc.) and the present LU (research stations of various nations) needs to be mapped accurately for the hassle free routine activities. Geo-location has become the most important part of geosciences studies. In this paper we have tried to locate three most important features (snow/ice, landmass, and water) and also have extracted the extent of the same using the multisource classification (image fusion/pansharpening) and pattern recognition (supervised/unsupervised methods, index ratio methods). Innovation in developing spectral index ratios has led us to come up with an unique ratio named Normalized Difference Landmass Index (NDLI) which performed better (Avg. Bias: 51.99m) than other ratios such as Normalized Difference Snow/Ice Index (NDSII) (Avg. Bias: -1572.11m) and Normalized Difference Water Index (NDWI) (Avg. Bias: 1886.60m). The practiced trial and error methodology quantifies the productivity of not only the classification methods over one other but also that of the fusion methods. In present study, classifiers used (Mahalanobis and Winner Takes All) performed better (Avg. Bias: 122.16 m) than spectral index ratios (Avg. Bias: 620.16 m). The study also revealed that newly introduced bands in WorldView-2, band 1 (Coastal Blue), 4 (Yellow), 6 (Red-edge) and 8 (Near Infrared-2) along with traditional bands have the capacity to mine the polar geospatial information with utmost accuracy and efficiency.

High resolution satellite data provide high spatial, spectral and contextual information. Spatial and contextual information of image objects are in demand to extract the information from high resolution satellite data. The supraglacial environment includes several features that are present on the surface of the glacier. The extraction of features from supraglacial environment is quite challenging using pixel-based image analysis. To overcome this, objectoriented approach is implemented. This paper aims at the extraction of geo-information from the supraglacial environment from high resolution satellite image by object-oriented image analysis using the fuzzy logic approach. The object-oriented image analysis involves the multiresolution segmentation for the creation of objects followed by the classification of objects using the fuzzy logic approach. The multiresolution segmentation is executed on the pixel level initially which merges pixels for the creation of objects thus minimizing their heterogeneity. This is followed by the development of rule sets for the classification of various features such as blue ice, debris, snow from the supraglacial environment in WorldView-2 data. The area of extracted feature is compared with the reference data and misclassified area of each feature using various bands is determined. The present object oriented classification achieved an overall accuracy of ≈ 92% for classifying supraglacial features. Finally, it is suggested that Red band is quite effective in the extraction of blue ice and snow, while NIR1 band is effective in debris extraction.

An accurate spatial mapping and characterization of land cover features in cryospheric regions is an essential procedure for many geoscientific studies. A novel semi-automated method was devised by coupling spectral index ratios (SIRs) and geographic object-based image analysis (OBIA) to extract cryospheric geospatial information from very high resolution WorldView 2 (WV-2) satellite imagery. The present study addresses development of multiple rule sets for OBIA-based classification of WV-2 imagery to accurately extract land cover features in the Larsemann Hills, east Antarctica. Multilevel segmentation process was applied to WV-2 image to generate different sizes of geographic image objects corresponding to various land cover features with respect to scale parameter. Several SIRs were applied to geographic objects at different segmentation levels to classify land mass, man-made features, snow/ice, and water bodies. We focus on water body class to identify water areas at the image level, considering their uneven appearance on landmass and ice. The results illustrated that synergetic usage of SIRs and OBIA can provide accurate means to identify land cover classes with an overall classification accuracy of ≈97%. In conclusion, our results suggest that OBIA is a powerful tool for carrying out automatic and semiautomatic analysis for most cryospheric remote-sensing applications, and the synergetic coupling with pixel-based SIRs is found to be a superior method for mining geospatial information.

Satellite-derived sea-ice extent in the Indian Ocean Sector during the period November 1978 to December 2006 was studied in relation to the atmospheric forcing and oceanic thermohaline structure. The study revealed that sea-ice extent increased when the ocean exhibited higher stability. Low sea-ice extent was observed during 1985 to 1993, when the zonal winds and latent flux was relatively weak and when the ocean exhibited strong vertical mixing facilitated by low stability thereby, deepening the mixed layer to ∼250 m. This was reflected in the ocean surface layer temperature, which was relatively warm (−0.3°C). Winds increased during 1996 to 2000, but due to higher oceanic stability mixed layer depth shallowed (< 200 m) leading to reduced vertical mixing of deep warmer layers with the surface water, leading to an enhancement in the sea-ice extent.

Using QuikScat-based vector wind data for 1999–2003, surface wind stress and turbulent heat (Q) have been mapped for the tropical Indian Ocean (IO) to understand their seasonal variability. During July wind stress is enhanced by ∼ 70% in the Arabian Sea compared to that during January. The Arabian Sea experiences a large Q loss (150–200 W/m2) during the summer and winter monsoons, which is nearly 1.3 times of that in the Bay of Bengal. The southeasterlies are strengthened during the southern hemisphere winter. Empirical Orthogonal Function analysis captures different phases of monsoon-induced variability in wind stress and Q, ranging from seasonal to high-frequency perturbations. Coherency between time coefficients of EOF-1 for wind stress and Q suggests that former leads the latter with a temporal lag of 20–40 days for period > 322 days. At high frequencies (< 21 days) Q leads wind stress with a temporal lag of 2 days. Possible explanation for wind stress leading Q over an annual time scale is offered based on the marine atmospheric boundary layer physics and pre-conditioned ocean surface, while on shorter time scales (21 days) ocean thermodynamics through mixed layer processes cause Q to lead wind stress.

Upper layer (0}400 m) geostrophic volume transport associated with the major current systems of the tropical Indian Ocean along the near-meridional TOGA-India XBT tracklines from Mumbai to Mauritius during 1992}1996 is discussed. The transport of the eastward #owing Indian Monsoon Current (IMC) varies between 9 and 14 Sv (1 Sv"106 m3 s~1) during southwest monsoon. The westward #owing North Equatorial Current (NEC) transports about 8 Sv during boreal winter. The westward #owing south equatorial current (SEC) has its lowest transport (10}12 Sv) during austral fall and spring and highest transport (18}21 Sv) during austral winter and summer. The northern boundary of the SEC extends equatorward as far north as for 4}53S during southwest monsoon from its usual location of 8}103S. The eastward #owing South Equatorial Counter Current (SECC) exhibits highest transport (37 Sv) during peak austral summer (January) and between 5 and 20 Sv during the rest of the year. In March and May, eastward undercurrents are noticed near the equator. In June and July, the undercurrents are present south of Sri Lanka away from the equator. The equatorial #ow in the zonal belts 1}23N and 1}23S exhibits westward transport of 6}20 Sv during January}February. This broad westward #ow and the SECC constitute an anticlockwise equatorial gyre during boreal winter. In addition to the above current systems, signatures of a warm-core anticyclonic eddy centered at 83N, 72.53E and a cold-core cyclonic eddy centered at 10.53N, 72.53E are also noticed in February and October, respectively, o! the southwest coast of India. The volume transport associated with the warm-core eddy is about 10 Sv directed equatorward and that with the cold-core eddy is 2.5 Sv directed poleward. ( 2000 Elsevier Science Ltd. All rights reserved.

[1] Topographic meandering of Antarctic Circumpolar Current (ACC) is found to be an impediment in the propagation of Antarctic Circumpolar Wave (ACW) in the Indian Ocean sector of Antarctica. Reasons for this are attributed to the southward advection of the ACW anomalies associated with the topographic meandering of the ACC. The southward meandering of ACC facilitates warming up of the region east of 20°E by about 1°C during winter, thereby reducing the sea ice; these processes interfere with the eastward propagating positive sea‐ice anomalies, and reduce its strength. Warming of ocean induced by topographic meandering leads to upward vertical velocities between 40°–60°E, where the ocean surface velocities are weak and southward, and the vertical/meridional advection of temperature dominates the zonal advection in the atmosphere. This results in the decoupling of the ACW in the region east of 40°E. In regions out side the Indian Ocean sector, vertical advection is minimum and zonal velocity of ACC becomes positive, which facilitates the ACW propagation in the Central Pacific, Ross and Weddell Seas. Citation: Nuncio, M., A. J. Luis, and X. Yuan (2011), Topographic meandering of Antarctic Circumpolar Current and Antarctic Circumpolar Wave in the ice‐ ocean‐atmosphere system, Geophys. Res. Lett., 38, L13708

Glacier facies are zones of snow on a glacier that have certain specific spectral characteristics that enable their characterization. The accuracy of their extraction will determine the end accuracy of the distributed mass balance model calibrated by this information. Therefore, coarse to medium resolution satellites are not preferable for this particular function as the data derived from such sensors will potentially blur out the minute spatial variations on the surface of a glacier. Very high resolution (VHR) sensors (such as, WorldView (WV)-1, 2, 3) are thus much more suited for this particular task. Hence, this study aims to extract the available glacier facies on the Sutri Dhaka glacier, Himalayas, using very high-resolution WorldView-2 (WV-2) imagery. Extensive pre-processing of the imagery was performed to prepare the data for this purpose. The steps incorporated for this purpose consist of 1) Data Calibration, 2) Mosaicking, 3) Pan Sharpening, 4) Generation of 3D surface, and 5) Digitization. Using image classification as the primary method of information extraction, this study tests the ever-popular pixel-based classification technique against the uprising object-based classification technique. In doing so, this study aims to determine the most accurate technique of information extraction for the WV-2 imagery in the given scenario. The presence of unique bands (Coastal (0.40–0.45 μm), Red Edge (0.705–0.745 μm), NIR-1 (0.770–0.895 μm) and NIR-2 (0.86–1.04 μm) in the multispectral range of WV-2, allows this study to perform facies classification through the development of customized spectral index ratios (SIRs) in the object-based domain. Establishment of thresholds was hence necessitated for information extraction through the developed SIRs. Three supervised classifiers, namely, a) Mahalanobis distance, b) Maximum likelihood, and c) Minimum distance to mean, were then used to perform classification, thereby allowing a comparative analysis between the classification schemes. Accuracy assessment for each classification scheme was performed using error matrices. The object-based approach achieved an overall accuracy of 90% (κ = 0.88) and the highest overall accuracy among the pixel-based classification methods is 78.57% (κ = 0.75). The results clearly portray that the object-based method delivered much higher accuracy than the pixel-based methods. The carry home message is that future studies must examine the transferability and accuracy of the customized SIRs in varying scenarios, as different scenarios will require varying threshold adjustments. Forthcoming studies can also develop sensor specific and unique indices for other sensors that are suitable for such applications.