Search

High relatedness in the US Holstein breed can be attributed to the increased rate of inbreeding that resulted from strong selection and the extensive use of a few bulls via reproductive biotechnology. The objectives of this study were to determine whether clustering could separate selected candidates into genetically different groups and whether such clustering could reduce the expected inbreeding of the next generation. A genomic relationship matrix composed of 1,145 sires with the most registered progeny in the breed born after 1985 was used for principal component analysis and k-means clustering. The 5 clusters reduced the variance by 25% and contained 171 (C1), 252 (C2), 200 (C3), 244 (C4), and 278 (C5) animals, respectively. The 2 most predominant families were C1 and C2, while C4 contained the most international animals. On average, C1 and C5 contained older animals; the average birth year per cluster was 1988 (C1), 1996 (C2 and C3), 1999 (C4), and 1990 (C5). Increasing to 10 clusters allowed the separation of the predominant sons. Statistically significant differences were observed for indices (net merit index, cheese merit index, and fluid merit index), daughter pregnancy rate, and production traits (milk, fat, and protein), with older clusters having lower merit for production but higher for reproduction. K-means clustering was also used for 20,099 animals considered as selection candidates. Based on the reduction in variance achieved by clustering, 5 to 7 clusters were appropriate. The number of animals in each cluster was 3,577 (C1), 3,073 (C2), 3,302 (C3), 5,931 (C4), and 4,216 (C5). The expected inbreeding from within or across cluster mating was calculated using the complete pedigree, assuming the mean inbreeding of animals born in the same year when parents are unknown. Generally, inbreeding was highest within cluster mating and lowest across cluster mating. Even when 10 clusters were used, one cluster always gave low inbreeding in all scenarios. This suggests that this cluster contains animals that differ from all other groups but still contains enough diversity within itself. Based on lower across cluster inbreeding, up to 7 clusters were appropriate. Statistically significant differences in genomic estimated breeding values were found between clusters. The rankings of clusters for different traits were mostly the same except for reproduction and fat. Results show that diversity within the population exists and clustering of selection candidates can reduce the expected inbreeding of the next generations., (The Authors. Published by Elsevier Inc. and Fass Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).)

Single-step genomic BLUP (ssGBLUP) is a method for genomic prediction that integrates matrices of pedigree (A) and genomic (G) relationships into a single unified additive relationship matrix whose inverse is incorporated into a set of mixed model equations (MME) to compute genomic predictions. Pedigree information in dairy cattle is often incomplete. Missing pedigree potentially causes biases and inflation in genomic estimated breeding values (GEBV) obtained with ssGBLUP. Three major issues are associated with missing pedigree in ssGBLUP, namely biased predictions by selection, missing inbreeding in pedigree relationships, and incompatibility between G and A in level and scale. These issues can be solved using a proper model for unknown-parent groups (UPG). The theory behind the use of UPG is well established for pedigree BLUP, but not for ssGBLUP. This study reviews the development of the UPG model in pedigree BLUP, the properties of UPG models in ssGBLUP, and the effect of UPG on genetic trends and genomic predictions. Similarities and differences between UPG and metafounder (MF) models, a generalized UPG model, are also reviewed. A UPG model (QP) derived using a transformation of the MME has a good convergence behavior. However, with insufficient data, the QP model may yield biased genetic trends and may underestimate UPG. The QP model can be altered by removing the genomic relationships linking GEBV and UPG effects from MME. This altered QP model exhibits less bias in genetic trends and less inflation in genomic predictions than the QP model, especially with large data sets. Recently, a new model, which encapsulates the UPG equations into the pedigree relationships for genotyped animals, was proposed in simulated purebred populations. The MF model is a comprehensive solution to the missing pedigree issue. This model can be a choice for multibreed or crossbred evaluations if the data set allows the estimation of a reasonable relationship matrix for MF. Missing pedigree influences genetic trends, but its effect on the predictability of genetic merit for genotyped animals should be negligible when many proven bulls are genotyped. The SNP effects can be back-solved using GEBV from older genotyped animals, and these predicted SNP effects can be used to calculate GEBV for young-genotyped animals with missing parents., (The Authors. Published by Elsevier Inc. and Fass Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).)

The objective of this study was to predict genomic breeding values for milk yield of crossbred dairy cattle under different scenarios using single-step genomic BLUP (ssGBLUP). The data set included 13,880,217 milk yield measurements on 6,830,415 cows. Genotypes of 89,558 Holstein, 40,769 Jersey, and 22,373 Holstein-Jersey crossbred animals were used, of which all Holstein, 9,313 Jersey, and 1,667 crossbred animals had phenotypic records. Genotypes were imputed to 45K SNP markers. The SNP effects were estimated from single-breed evaluations for Jersey (JE), Holstein (HO) and crossbreds (CROSS), and multibreed evaluations including all Jersey and Holstein (JE_HO) or approximately equal proportions of Jersey, Holstein, and crossbred animals (MIX). Indirect predictions (IP) of the validation animals (358 crossbred animals with phenotypes excluded from evaluations) were calculated using the resulting SNP effects. Additionally, breed proportions (BP) of crossbred animals were applied as a weight when IP were estimated based on each pure breed. The predictive ability of IP was calculated as the Pearson correlation between IP and phenotypes of the validation animals adjusted for fixed effects in the model. Regression of adjusted phenotypes on IP was used to assess the inflation of IP. The predictive ability of IP for CROSS, JE, HO, JE_HO, and MIX scenario was 0.50, 0.50, 0.47, 0.50, and 0.46, respectively. Using BP was the least successful, with a predictive ability of 0.32. The inflation of the IP for crossbred animals using CROSS, JE, HO, JE_HO, MIX, and BP scenarios were 1.17, 0.65, 0.55, 0.78, 1.00, and 0.85, respectively. The IP of crossbred animals can be predicted using single-step GBLUP under a scenario that includes purebred genotypes., (The Authors. Published by Elsevier Inc. and Fass Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).)

We performed genome-wide association analyses for milk, fat, and protein yields and somatic cell score based on lactation stages in the first 3 parities of Canadian Ayrshire, Holstein, and Jersey cattle. The genome-wide association analyses were performed considering 3 different lactation stages for each trait and parity: from 5 to 95, from 96 to 215, and from 216 to 305 d in milk. Effects of single nucleotide polymorphisms (SNP) for each lactation stage, trait, parity, and breed were estimated by back-solving the direct breeding values estimated using the genomic best linear unbiased predictor and single-trait random regression test-day models containing only the fixed population average curve and the random genomic curves. To identify important genomic regions related to the analyzed lactation stages, traits, parities and breeds, moving windows (SNP-by-SNP) of 20 adjacent SNP explaining more than 0.30% of total genetic variance were selected for further analyses of candidate genes. A lower number of genomic windows with a relatively higher proportion of the explained genetic variance was found in the Holstein breed compared with the Ayrshire and Jersey breeds. Genomic regions associated with the analyzed traits were located on 12, 8, and 15 chromosomes for the Ayrshire, Holstein, and Jersey breeds, respectively. Especially for the Holstein breed, many of the identified candidate genes supported previous reports in the literature. However, well-known genes with major effects on milk production traits (e.g., diacylglycerol O-acyltransferase 1) showed contrasting results among lactation stages, traits, and parities of different breeds. Therefore, our results suggest evidence of differential sets of candidate genes underlying the phenotypic expression of the analyzed traits across breeds, parities, and lactation stages. Further functional studies are needed to validate our findings in independent populations., (Copyright © 2019 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

The use of multi-trait across-country evaluation (MACE) and the exchange of genomic information among countries allows national breeding programs to combine foreign and national data to increase the size of the training populations and potentially increase accuracy of genomic prediction of breeding values. By including genotyped and nongenotyped animals simultaneously in the evaluation, the single-step genomic BLUP (GBLUP) approach has the potential to deliver more accurate and less biased genomic evaluations. A single-step genomic BLUP approach, which enables integration of data from MACE evaluations, can be used to obtain genomic predictions while avoiding double-counting of information. The objectives of this study were to apply a single-step approach that simultaneously includes domestic and MACE information for genomic evaluation of workability traits in Canadian Holstein cattle, and compare the results obtained with this methodology with those obtained using a multi-step approach (msGBLUP). By including MACE bulls in the training population, msGBLUP led to an increase in reliability of genomic predictions of 4.8 and 15.4% for milking temperament and milking speed, respectively, compared with a traditional evaluation using only pedigree and phenotypic information. Integration of MACE data through a single-step approach (ssGBLUP IM ) yielded the highest reliabilities compared with other considered methods. Integration of MACE data also helped reduce bias of genomic predictions. When using ssGBLUP IM , the bias of genomic predictions decreased by half compared with msGBLUP using domestic and MACE information. Therefore, the reliability and bias of genomic predictions for both traits improved substantially when a single-step approach was used for evaluation compared with a multi-step approach. The use of a single-step approach with integration of MACE information provides an alternative to the current method used in Canadian genomic evaluations., (Copyright © 2019 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

Genomic selection (GS) is routinely applied to many purebreds and lines of farm species. However, this method can be extended to predictions across purebreds as well as for crossbreds. This is useful for swine and poultry, for which selection in nucleus herds is typically performed on purebred animals, whereas the commercial product is the crossbred animal. Single-step genomic BLUP (ssGBLUP) is a widely applied method that can explore the recently developed algorithm for proven and young (APY). The APY allows for greater efficiency in computing BLUP solutions by exploiting the theory of limited dimensionality of genomic information and chromosome segments (Me). This study investigates the predictivity as a proxy for accuracy across and within 2 purebred pig lines and their crosses, under the application of APY in ssGBLUP setup, and different levels of Me overlapping across populations. The data consisted of approximately 210k phenotypic records for 2 traits (T1 and T2) with moderate heritability. Genotypes for 43k SNP markers were available for approximately 46k animals, from which 26k and 16k belong to 2 pure lines (L1 and L2), and approximately 4k are crossbreds. The complete pedigree had more than 720k animals. Different multivariate ssGBLUP models were applied, either with the regular or APY inverse of the genomic relationship matrix (G). The models included a standard bivariate animal model with 3 lines evaluated as 1 joint line, and for each trait individually, a 3-trait animal model with each line treated as a separate trait. Both models provided the same predictivity across and within the lines. Using either of the pure lines data as a training set resulted in a similar predictivity for the crossbreed animals (0.18 to 0.21). Across-line predictive ability was limited to less than half of the maximum predictivity for each line (L1T1 0.33, L1T2 0.25, L2T1 0.35, L2T2 0.36). For crossbred predictions, APY performed equivalently to regular G inverse when the number of core animals was equal to the number of eigenvalues explaining between 98% and 99% of the variance of G (4k to 8k) including all lines. Predictivity across the lines is achievable because of the shared Me between them. The number of those shared segments can be obtained via eigenvalue decomposition of genomic information available for each line., (© The Author(s) 2019. Published by Oxford University Press on behalf of the American Society of Animal Science.)

In genomic evaluations, it is desirable to have low computing cost while retaining high accuracy of evaluation for young animals. When the population is large but only few animals have phenotypes, especially for low heritability traits, the convergence rate of BLUP or single-step genomic BLUP (ssGBLUP) can be very slow. This study investigates the effect of pedigree truncation on convergence rate and solutions of ssGBLUP for data exhibiting slow convergence. The data consisted of 216,000, 221,000, 732,000, and 579,000 phenotypes on 4 traits. Heritabilities were less than 0.1 for 2 traits and greater than 0.2 for the other 2 traits. The full pedigree consisted of 2.4 million animals. Genotypes were available for 33,000 animals and consisted of 60,000 SNP. Two bivariate animal models were fit using pedigree-based BLUP or ssGBLUP. Either a regular or the algorithm for proven and young (APY) inverse was used for the genomic relationship matrix. Different pedigree depths were analyzed including full pedigree and 1 to 5 ancestral generations. Pedigree depths were defined as n ancestral generations for animals with phenotypes. The number of animals in the reduced pedigrees varied from 226,000 and 760,000 for 1 generation to 228,000 and 767,000 for 5 generations. Genomic EBV (GEBV) for genotyped animals had correlations greater than 0.99 between runs with the full and reduced pedigrees with 2 to 5 generations. A single generation of pedigree was not sufficient to obtain the same GEBV as full pedigree. The convergence rate was the worst with the full pedigree and generally improved with reduced pedigrees. Using ssGBLUP with the APY inverse improved convergence without affecting accuracy. Reducing pedigrees and the APY are important tools to reduce the computational cost in the implementation of ssGBLUP.

Background: Much effort is put into identifying causative quantitative trait nucleotides (QTN) in animal breeding, empowered by the availability of dense single nucleotide polymorphism (SNP) information. Genomic selection using traditional SNP information is easily implemented for any number of genotyped individuals using single-step genomic best linear unbiased predictor (ssGBLUP) with the algorithm for proven and young (APY). Our aim was to investigate whether ssGBLUP is useful for genomic prediction when some or all QTN are known., Methods: Simulations included 180,000 animals across 11 generations. Phenotypes were available for all animals in generations 6 to 10. Genotypes for 60,000 SNPs across 10 chromosomes were available for 29,000 individuals. The genetic variance was fully accounted for by 100 or 1000 biallelic QTN. Raw genomic relationship matrices (GRM) were computed from (a) unweighted SNPs, (b) unweighted SNPs and causative QTN, (c) SNPs and causative QTN weighted with results obtained with genome-wide association studies, (d) unweighted SNPs and causative QTN with simulated weights, (e) only unweighted causative QTN, (f-h) as in (b-d) but using only the top 10% causative QTN, and (i) using only causative QTN with simulated weight. Predictions were computed by pedigree-based BLUP (PBLUP) and ssGBLUP. Raw GRM were blended with 1 or 5% of the numerator relationship matrix, or 1% of the identity matrix. Inverses of GRM were obtained directly or with APY., Results: Accuracy of breeding values for 5000 genotyped animals in the last generation with PBLUP was 0.32, and for ssGBLUP it increased to 0.49 with an unweighted GRM, 0.53 after adding unweighted QTN, 0.63 when QTN weights were estimated, and 0.89 when QTN weights were based on true effects known from the simulation. When the GRM was constructed from causative QTN only, accuracy was 0.95 and 0.99 with blending at 5 and 1%, respectively. Accuracies simulating 1000 QTN were generally lower, with a similar trend. Accuracies using the APY inverse were equal or higher than those with a regular inverse., Conclusions: Single-step GBLUP can account for causative QTN via a weighted GRM. Accuracy gains are maximum when variances of causative QTN are known and blending is at 1%.