Search

In some topologies of yokeless and segmented armature (YASA) axial flux permanent-magnet (AFPM) machines, the particular frame structure required to fasten floating teeth can originate stray paths where parasitic currents may circulate. This paper investigates how the amplitude of these currents and the related additional Joule losses depend on the machine size. Reference is made to wind energy generators, rated from some tens of kilowatts up to a few megawatts. The developed model is mainly based on wind turbine basic data of vendor data sheets, and on the quantities evaluated and tested in two YASA AFPM prototypes, rated 50 and 200 kW. [ABSTRACT FROM PUBLISHER]

Due to the high torque capability, axial flux (AF) permanent-magnet (PM) machines are an interesting solution for direct driven wind energy conversion systems and low-speed motors. However, the structure of such machines makes them sensitive to geometrical imperfections due to manufacturing process. This paper analyzes the effects that various types of geometrical imperfections produce in concentrated coil AF PM generators. In particular, a case study is presented, where the mechanical stresses, the resulting axial force, and the bending torques on the shaft, as well as the circulation current in the winding parallel paths, are calculated. The results obtained by means of an analytical approach are compared with those based on finite element method simulations and are validated by some experimental results on a prototype. [ABSTRACT FROM PUBLISHER]

This paper deals with the ac–dc interface conversion in grid-connected wind energy conversion systems based on modular permanent-magnet synchronous generators. In particular, some solutions based on diode rectifiers are extensively analyzed as for the waveforms, the efficiency, and the torque ripple, by considering several connections, which are allowed by the inherent modularity of the considered generators. Rectifier schemes with a high number of pulses can be easily realized without using special shifter transformers so that these solutions can be attractive for low- and medium-power applications. [ABSTRACT FROM PUBLISHER]

Some design and operation aspects of axial flux permanent magnet synchronous machines, wound with concentrated coils, are presented. Due to their high number of poles, compactness, and excellent waveform quality and efficiency, these machines show satisfactory operation at low speeds, both as direct drive generators and as motors. In this paper, after a general analysis of the model and design features of this kind of machine, the attention is focused on wind power generation: The main sizing equations are defined, and the most relevant figures of merit are examined by means of a suitable parametric analysis. Some experimental results obtained by testing a three-phase, 50-kW, and 70-rpm prototype are presented and discussed, validating the modeling theory and the design procedure. [ABSTRACT FROM AUTHOR]