Search

While the dissociative recombination (DR) of ground-state molecular ions with low-energy free electrons is generally known to be exothermic, it has been predicted to be endothermic for a class of transition-metal oxide ions. To understand this unusual case, the electron recombination of titanium oxide ions (TiO+) with electrons has been experimentally investigated using the Cryogenic Storage Ring. In its low radiation field, the TiO+ ions relax internally to low rotational excitation (≲100 K). Under controlled collision energies down to [Formula: see text] meV within the merged electron and ion beam configuration, fragment imaging has been applied to determine the kinetic energy released to Ti and O neutral reaction products. Detailed analysis of the fragment imaging data considering the reactant and product excitation channels reveals an endothermicity for the TiO+ dissociative electron recombination of (+4 ± 10) meV. This result improves the accuracy of the energy balance by a factor of 7 compared to that found indirectly from hitherto known molecular properties. Conversely, the present endothermicity yields improved dissociation energy values for D0(TiO) = (6.824 ± 0.010) eV and D0(TiO+) = (6.832 ± 0.010) eV. All thermochemistry values were compared to new coupled-cluster calculations and found to be in good agreement. Moreover, absolute rate coefficients for the electron recombination of rotationally relaxed ions have been measured, yielding an upper limit of 1 × 10−7 cm3 s−1 for typical conditions of cold astrophysical media. Strong variation of the DR rate with the TiO+ internal excitation is predicted. Furthermore, potential energy curves for TiO+ and TiO have been calculated using a multi-reference configuration interaction method to constrain quantum-dynamical paths driving the observed TiO+ electron recombination.

The mutual neutralisation of O+ with O- has been studied in a double ion-beam storage ring with combined merged-beams, imaging and timing techniques. Branching ratios were measured at the collision energies of 55, 75 and 170 (+/- 15) meV, and found to be in good agreement with previous single-pass merged-beams experimental results at 7 meV collision energy. Several previously unidentified spectral features were found to correspond to mutual neutralisation channels of the first metastable state of the cation (O+(D-2(o)), tau approximate to 3.6 hours), while no contributions from the second metastable state (O+(P-2(o)), tau approximate to 5 seconds) were observed. Theoretical calculations were performed using the multi-channel Landau-Zener model combined with the anion centered asymptotic method, and gave good agreement with several experimentally observed channels, but could not describe well observed contributions from the O+(D-2(o)) metastable state as well as channels involving the O(3s S-5(o)) state.

Electronically excited NdO is a possible product of the chemistry associated with the release of Nd into the ionosphere, and emission from these states may contribute to the observations following such experiments. To better characterize the energetics and spectroscopy of NdO, we report a combined experimental and theoretical study using slow photoelectron velocity-map imaging spectroscopy of cryogenically cooled NdO− anions (cryo-SEVI) supplemented by wave function-based quantum-chemical calculations. Using cryo-SEVI, we measure the electron affinity of NdO to be 1.0091(7) eV and resolve numerous transitions to low-lying electronic and vibrational states of NdO that are assigned with the aid of the electronic structure calculations. Additionally, temperature-dependent data suggest contributions from the (2)4.5 state of NdO− residing 2350 cm−1 above the ground anion state. Photodetachment to higher-lying excited states of NdO is also reported, which may help to clarify observations from prior release experiments.

The kinetics of AlO+ + CH4 are studied from 300-500 K using a selected-ion flow tube. At all temperatures the reaction proceeds near the Langevin-Gioumousis-Stevenson collision rate with two product channels: hydrogen atom abstraction (AlOH+ + CH3, 86 ± 5%) and methanol formation (Al+ + CH3OH, 14 ± 5%). Density functional calculations show the key Al-CH3OH+ intermediate is formed barrierlessly via a mechanism unique to aluminum, avoiding the rate-limiting step common to other MO+. The reaction of Al2O3+ + CH4 follows a similar mechanism to that for AlO+ through to the key intermediate; however, the conversion to methanol occurs only for AlO+ due to favorable energetics attributed to a weaker Al+-CH3OH bond. Importantly, that bond strength may be tuned independent of competing product channels by altering the acidity of the Al with electron-withdrawing or donating groups, indicating a key design criteria to develop a real world Al-atom catalyst.

The SmO+ bond energy has been measured by monitoring the threshold for photodissociation of the cryogenically cooled ion. The action spectrum features a very sharp onset, indicating a bond energy of 5.596 ± 0.004 eV. This value, when combined with the literature value of the samarium ionization energy, indicates that the chemi-ionization reaction of atomic Sm with atomic oxygen is endothermic by 0.048 ± 0.004 eV, which has important implications on the reactivity of Sm atoms released into the upper atmosphere. The SmO+ ion was prepared by electrospray ionization followed by collisional breakup of two different precursors and characterized by the vibrational spectrum of the He-tagged ion. The UV photodissociation threshold is similar for the 10 K bare ion and the He tagged ion, which rules out the possible role of metastable electronically excited states. Reanalysis and remeasurement of previous reaction kinetics experiments that are dependent on D0(SmO+) are included, bringing all experimental results in accord.

The kinetics of MgO + + CH 4 was studied experimentally using the variable ion source, temperature adjustable selected ion flow tube (VISTA-SIFT) apparatus from 300 − 600 K and computationally by running and analyzing reactive atomistic simula- tions. Rate coefficients and product branching fractions were determined as a function of temperature. The reaction proceeded with a rate of k = 5 . 9 ± 1 . 5 × 10 − 10 ( T/ 300 K) − 0 . 5 ± 0 . 2 cm 3 s − 1 . MgOH + was the dominant product at all temperatures, but Mg + , the co-product of oxygen-atom transfer to form methanol, was observed with a product branching fraction of 0 . 08 ± 0 . 03( T/ 300 K) − 0 . 8 ± 0 . 7 . Reactive molecular dynamics simulations using a reactive force field, as well as a neural network trained on thousands of structures yield rate coefficients about one order of magnitude lower. This underestimation of the rates is traced back to the multireference character of the transition state [MgOCH 4 ] + . Statistical modeling of the temperature-dependent kinetics provides further insight into the reactive potential surface. The rate limiting step was found to be consistent with a four-centered activation of the C-H bond, consistent with previous calculations. The product branching was modeled as a competition between dissociation of an insertion intermediate directly after the rate- limiting transition state, and traversing a transition state corresponding to a methyl migration leading to a Mg-CH 3 OH + complex, though only if this transition state is stabilized significantly relative to the dissociated MgOH + + CH 3 product channel. An alternative non-statistical mechanism is discussed, whereby a post-transition state bifurcation in the potential surface could allow the reaction to proceed directly from the four-centered TS to the Mg-CH 3 OH + complex thereby allowing a more robust competition between the product channels .

The kinetics of 4Fe+(CO)n=0–2 + O2 are measured under thermal conditions from 300–600 K using a selected-ion flow tube apparatus. Both the bare metal and n = 2 cations are inert to reaction over this temperature range, but 4Fe+(CO) reacts rapidly (k = 3.2 ± 0.8 × 10−10 cm3 s−1 at 300 K, 52% of the collisional rate coefficient) to form FeO+ + CO2. This is an example of the oxidation of CO by O2 occurring entirely on a single non-noble metal atom. The reaction of the bare metal reaction is known to be endothermic, such that this result is expected; however, the n = 2 reaction has highly exothermic product channels available, such that the lack of reaction is surprising in light of the n = 1 reactivity. Stationary points along all three reaction coordinates are calculated using the TPSSh hybrid functional. These surfaces show that the n = 1 reaction is an example of two-state reactivity; the reaction proceeds initially on the sextet surface over a submerged barrier to a structure with an O–O bond distance longer than that in O2, but must cross to the quartet surface in order to proceed over a second submerged barrier to rearrange to form CO2. The n = 2 reaction does not proceed because, on all spin surfaces, the transition state corresponding to O–O separation is at higher energy than the separated reactants. The difference between the n = 1 and n = 2 reactions is not a result of steric effects, but rather because the O2 is more strongly bound to Fe in the entrance well of the n = 1 case, and that energy is available to overcome the rate-limiting barrier to O–O cleavage. Experimental verification of some of these details are provided by guided ion beam tandem mass spectrometry results. The kinetic energy dependence of the n = 1 reaction shows evidence for a curve crossing and yields relevant thermochemistry for competing reaction channels.

Electron attachment to phosphoryl chloride (phosphorus oxychloride) POCl 3 has been studied in the gas phase by mass spectrometry at several low temperatures (47.7, 74.5, 169.7 and 199.5 K) with the CRESU method. By measuring over this temperature range and data from [8] , we have demonstrated the inversion of the branching ratio between the exothermic non-dissociative exit channel POCl 3 − and the thermo-neutral dissociative exit channel POCl 2 − + Cl. A kinetic model in terms of statistical theory is used to fit the experimental data.

We present 300 K rate constants for the ion-ion reactions of O + a n d N + with the atomic halide anions: C l - , B r - , a n d I - measured using a flowing afterglow – Langmuir probe apparatus. All six rate constants were > 1 × 10 - 8 c m 3 s - 1 , larger than those typical for atomic ion – atomic ion reactions, approaching the rate constants of more complex ion-ion systems. Evaluation of literature atomic ion – atomic ion rate constants shows variation over orders of magnitude, but limited to below the expected value for a polyatomic ion-ion reaction of the same reduced mass, fitting into an expected physical picture. Unlike for polyatomic systems, estimation of rate constant for atomic ion – atomic ion reaction rates by simple means does not seem effective.

Rate constants for dissociative electron attachment to N2O yielding O− have been measured as a function of temperature from 400 K to 1000 K. Detailed modeling of kinetics was needed to derive the rate constants at temperatures of 700 K and higher. In the 400 K–600 K range, upper limits are given. The data from 700 K to 1000 K follow the Arrhenius equation behavior described by 2.4 × 10−8 e−0.288 eV/kT cm3 s−1. The activation energy derived from the Arrhenius plot is equal to the endothermicity of the reaction. However, calculations at the CCSD(T)/complete basis set level suggest that the lowest energy crossing between the neutral and anion surfaces lies 0.6 eV above the N2O equilibrium geometry and 0.3 eV above the endothermicity of the dissociative attachment. Kinetic modeling under this assumption is in modest agreement with the experimental data. The data are best explained by attachment occurring below the lowest energy crossing of the neutral and valence anion surfaces via vibrational Feshbach resonances.

New flowing afterglow/Langmuir probe investigations of electronic attachment to SF6 are described. Thermal attachment rate constants are found to increase from 1.5 × 10−7 cm3 s−1 at 200 K to 2.3 × 10−7 cm3 s−1 at 300 K. Attachment rate constants over the range of 200–700 K (from the present work and the literature), together with earlier measurements of attachment cross sections, are analyzed with respect to electronic and nuclear contributions. The latter suggest that only a small nuclear barrier (of the order of 20 meV) on the way from SF6 to SF6− has to be overcome. The analysis shows that not only s-waves but also higher partial waves have to be taken into account. Likewise, finite-size effects of the neutral target contribute in a non-negligible manner.

To provide a deeper understanding of the kinetics of electron attachment to CF3, the six-dimensional potential energy surfaces of both CF3 and CF3− were developed by fitting ∼3000 ab initio points per surface at the AE-CCSD(T)-F12a/AVTZ level using the permutation invariant polynomial-neural network (PIP-NN) approach. The fitted potential energy surfaces for CF3 and CF3− had root mean square fitting errors relative to the ab initio calculations of 1.2 and 1.8 cm−1, respectively. The main active mode for the crossing between the two potential energy surfaces was identified as the umbrella bending mode of CF3 in C3v symmetry. The lowest energy crossing point is located at RCF = 1.306 A and θFCF = 113.6° with the energy of 0.051 eV above the minimum of the CF3 electronic surface. This value is only slightly larger than the experimental data 0.026 ± 0.01 eV determined by kinetic modeling of electron attachment to CF3. The small discrepancy between the theoretical and experimentally measured values is analyzed.

The rates of the reactions Fe(+) + N2O → FeO(+) + N2 and FeO(+) + CO → Fe(+) + CO2 are modeled by statistical rate theory accounting for energy- and angular momentum-specific rate constants for formation of the primary and secondary cationic adducts and their backward and forward reactions. The reactions are both suggested to proceed on sextet and quartet potential energy surfaces with efficient, but probably not complete, equilibration by spin-inversion of the populations of the sextet and quartet adducts. The influence of spin-inversion on the overall reaction rate is investigated. The differences of the two reaction rates mostly are due to different numbers of entrance states (atom + linear rotor or linear rotor + linear rotor, respectively). The reaction Fe(+) + N2O was studied either with (6)Fe(+) or with (4)Fe(+) reactants. Differences in the rate constants of (6)Fe(+) and (4)Fe(+) reacting with N2O are attributed to different contributions from electronically excited potential energy surfaces, such as they originate from the open-electronic shell reactants.

Rate constants for the reactions of C+ + Cl-, Br-, and I- were measured at 300 K using the variable electron and neutral density electron attachment mass spectrometry technique in a flowing afterglow Langmuir probe apparatus. Upper bounds of

The kinetics of the FeCO(+) + N2O reaction have been studied at thermal energies (300-600 K) using a variable temperature selected ion flow tube apparatus. Rate constants and product branching fractions are reported. The reaction is modestly inefficient, proceeding with a rate constant of 6.2 × 10(-11) cm(3) s(-1) at 300 K, with a small negative temperature dependence, declining to 4.4 × 10(-11) cm(3) s(-1) at 600 K. Both Fe(+) and FeO(+) products are observed, with a constant branching ratio of approximately 40:60 at all temperatures. Calculation of the stationary points along the reaction coordinate shows that only the ground state quartet surface is initially sampled resulting in N2 elimination; a submerged barrier along this portion of the surface dictates the magnitude and temperature dependence of the total rate constant. The product branching fractions are determined by the behavior of the remaining (4)OFeCO(+) fragment, and this behavior is compared to that found in the reaction of FeO(+) + CO, which initially forms (6)OFeCO(+). Thermodynamic and kinetic arguments are used to show that the spin-forbidden surface crossing in this region is efficient, proceeding with an average rate constant of greater than 10(12) s(-1).

Mutual neutralization (MN) rate constants kMN for the reactions of H+ and D+ with the atomic halide anions Cl-, Br-, and I- were measured using the variable electron and neutral density attachment mass spectrometry technique in a flowing afterglow Langmuir probe apparatus. At 300 K, the rate constants for each reaction studied are on the order of 10-8 cm3 s-1. A trend for the rate constants of the systems in this work, kMNCl

The kinetics of thermal electron attachment to methyl thiocyanate (CH3SCN), methyl isothiocyanate (CH3NCS), and ethyl thiocyanate (C2H5SCN) were measured using flowing afterglow-Langmuir probe apparatuses at temperatures between 300 and 1000 K. CH3SCN and C2H5SCN undergo inefficient dissociative attachment to yield primarily SCN- at 300 K (k = 2 × 10-10 cm3 s-1), with increasing efficiency as temperature increases. The increase is well described by activation energies of 0.17 eV (CH3SCN) and 0.14 eV (C2H5SCN). CN- product is formed at

We have measured reaction rate constants for CO+ and CO2+ reacting with N and O atoms using a selected ion flow tube apparatus equipped with a microwave discharge atom source. Experimental work was supplemented by molecular structure calculations. Calculated pathways show the sensitivity of kinetic barriers to theoretical methods and imply that high-level ab initio methods are required for accurate energetics. We report room-temperature rate constants of 1.0 ± 0.4 × 10−11 cm3 s−1 and 4.0 ± 1.6 × 10−11 cm3 s−1 for the reactions of CO+ with N and O atoms, respectively, and 8.0 ± 3.0 × 10−12 cm3 s−1 and 2.0 ± 0.8 × 10−11 cm3 s−1 for the reactions of CO2+ with N and O atoms, respectively. The reaction of CO2+ + O is observed to yield O2+ exclusively. These values help resolve discrepancies in the literature and are important for modeling of the Martian atmosphere.

We report a joint experimental–theoretical study of the F – + HCl → HF + Cl − reaction kinetics. The experimental measurement of the rate coefficient at several temperatures was made using the selected ion flow tube method. Theoretical rate coefficients are calculated using the quasi-classical trajectory method on a newly developed global potential energy surface, obtained by fitting a large number of high-level ab initio points with augmentation of long-range electrostatic terms. In addition to good agreement between experiment and theory, analyses suggest that the ion–molecule reaction rate is significantly affected by shorter-range interactions, in addition to the traditionally recognized ion–dipole and ion–induced dipole terms. Furthermore, the statistical nature of the reaction is assessed by comparing the measured and calculated HF product vibrational state distributions to that predicted by the phase space theory. This article is part of the theme issue ‘Modern theoretical chemistry’.

The kinetics of chemi-ionization reactions of neodymium and samarium atoms with an oxygen atom to yield a metal monoxide cation and electron were studied using a flow tube apparatus over a temperature range of 150-450 K. Nd reacts efficiently with O, near the hard-sphere collision limit at all temperatures, with a rate constant of 3 × 10(-10) cm(3) s(-1) at 300 K and a slight positive temperature dependence. No chemi-ionization of Nd with N2O was observed, despite the reaction being exothermic. Chemi-ionization of Sm with O is slow, with a rate constant at 300 K determined to be 7 × 10(-12) cm(3) s(-1), although with large uncertainty. The Sm reaction also shows a slightly positive temperature dependence, described by a small activation energy of 60 meV. Although not definitive, the data suggest that excited states of Sm react efficiently whereas ground state Sm reacts inefficiently.

The exothermicity of the chemi-ionization reaction Sm + O → SmO(+) + e(-) has been re-evaluated through the combination of several experimental methods. The thermal reactivity (300-650 K) of Sm(+) and SmO(+) with a range of species measured using a selected ion flow tube-mass spectrometer apparatus is reported and provides limits for the bond strength of SmO(+), 5.661 eV ≤ D0(Sm(+)-O) ≤ 6.500 eV. A more precise value is measured to be 5.725 ± 0.07 eV, bracketed by the observed reactivity of Sm(+) and SmO(+) with several species using a guided ion beam tandem mass spectrometer (GIBMS). Combined with the established Sm ionization energy (IE), this value indicates an exothermicity of the title reaction of 0.08 ± 0.07 eV, ∼0.2 eV smaller than previous determinations. In addition, the ionization energy of SmO has been measured by resonantly enhanced two-photon ionization and pulsed-field ionization zero kinetic energy photoelectron spectroscopy to be 5.7427 ± 0.0006 eV, significantly higher than the literature value. Combined with literature bond energies of SmO, this value indicates an exothermicity of the title reaction of 0.14 ± 0.17 eV, independent from and in agreement with the GIBMS result presented here. The evaluated thermochemistry also suggests that D0(SmO) = 5.83 ± 0.07 eV, consistent with but more precise than the literature values. Implications of these results for interpretation of chemical release experiments in the thermosphere are discussed.

Dissociative recombination (DR) rate coefficients for the naphthalene cation, C10H8(+), and WF5(+), and mutual neutralization (MN) rate coefficients for these species and five CnFm(+) ions, were determined at 300 K using variable electron and neutral density attachment mass spectrometry (VENDAMS). DR proceeds at 9 ± 3 × 10(-7) cm(3) s(-1) for C10H8(+) and at 6.1 ± 1.4 × 10(-7) cm(3) s(-1) for WF5(+). Consistent with previous results, MN for the polyatomic cations with the halide anions Cl(-), Br(-), and I(-) exhibits an approximate μ(-1/2) reduced mass dependence of the reactant partners, demonstrating that ion collision velocities influence the rate coefficients. This work is an extension of VENDAMS to systems, where low reactant concentrations are necessary to avoid significant reaction of product ions with the neutral precursor, i.e., conditions not suitable for traditional flowing afterglow measurements, as well as to ions of masses∼ 100 Da, which are not amenable to the study of DR in magnetic storage rings. Our results expand the sparse literature on DR and MN of heavier ions.

The dissociative recombination of Na(+)(D(2)O) ion has been studied at the heavy-ion storage ring CRYRING (Manne Siegbahn Laboratory, Stockholm University). The cross section has been measured as a function of center-of-mass energy ranging from 1 meV to 0.1 eV and found to have an E(-1.37) dependence. The rate coefficient has been deduced to be (2.3+/-0.32)x10(-7)(T(e)/300)(-0.95+/-0.01) cm(3) s(-1) for T(e)=50-1000 K. The branching ratios have been measured at 0 eV. Of the four energetically accessible dissociation channels, three channels are found to occur although the channel that breaks the weak Na(+)-D(2)O bond is by far dominant.

The reactions of FeO(+) with H2 and of Fe(+) with N2O were studied with respect to the production and reactivity of electronically excited (4)Fe(+) cations. The reaction of electronic ground state (6)FeO(+) with H2 was found to predominantly produce electronically excited (4)Fe(+) as opposed to electronic ground state (6)Fe(+) corresponding to a spin-allowed reaction. (4)Fe(+) was observed to react with N2O with a rate constant of 2.3 (+0.3/-0.8) × 10(-11) cm(3) molecule(-1) s(-1), smaller than the ground state (6)Fe(+) rate constant of 3.2 (±0.5) × 10(-11) cm(3) molecule(-1) s(-1) (at room temperature). While the overall reaction of (6)FeO(+) with H2 within the Two-State-Reactivity concept is governed by efficient sextet-quartet spin-inversion in the initial reaction complex, the observation of predominant (4)Fe(+) production in the reaction is attributed to a much less efficient quartet-sextet back-inversion in the final reaction complex. Average spin-inversion probabilities are estimated by statistical modeling of spin-inversion processes and related to the properties of spin-orbit coupling along the reaction coordinate. The reaction of FeO(+) with H2 served as a source for (4)Fe(+), subsequently reacting with N2O. The measured rate constant has allowed for a more detailed understanding of the ground state (6)Fe(+) reaction with N2O, leading to a significantly improved statistical modeling of the previously measured temperature dependence of the reaction. In particular, evidence for the participation of electronically excited states of the reaction complex was found. Deexcitation of (4)Fe(+) by He was found to be slow, with a rate constant3 × 10(-14) cm(3) molecule(-1) s(-1).

The chemi-ionization reaction of atomic samarium, Sm + O → SmO+ + e−, has been investigated by the Air Force Research Laboratory as a means to modify local electron density in the ionosphere for reduction of scintillation of high-frequency radio waves. Neutral SmO is a likely unwanted byproduct. The spectroscopy of SmO is of great interest to aid in interpretation of optical emission spectra recorded following atmospheric releases of Sm as part of the Metal Oxide Space Cloud (MOSC) observations. Here, we report a joint experimental and theoretical study of SmO using slow photoelectron velocity-map imaging spectroscopy of cryogenically cooled SmO− anions (cryo-SEVI) and high-level spin-orbit complete active space calculations with corrections from second order perturbation theory (CASPT2). With cryo-SEVI, we measure the electron affinity of SmO to be 1.0581(11) eV and report electronic and vibrational structure of low-lying electronic states of SmO in good agreement with theory and prior experimental work....

Rate constants and product branching fractions of reactions between diatomic interhalogens (ICl, ClF) and a series of anions (Br−, I−) and cations (Ar+, N2+) are measured using a selected ion flow tube apparatus and reported over the temperature range 200–500 K. The efficiency of both anion reactions with ICl is 2%-3% at 300 K to yield Cl−, increasing with temperature in a manner consistent with the small endothermicities of the reactions. The anion reactions with ClF are 10%–20% efficient at 300 K to yield Cl− and also show a positive temperature dependence despite being highly exothermic. The stationary points along the anion + ClF reaction coordinates were calculated using density functional theory, showing no endothermic barriers inhibiting reaction. The observed temperature dependence can be rationalized by a decreasing dipole attraction with increasing rotational energy, but confirmation requires trajectory calculations of the systems. All four cation reactions are fairly efficient at 300 K with sma...

Theoretical and experimental studies are performed to elucidate the low energy charge-transfer dynamics of the reaction, O+(4S)+C2H2(X 1Σg+)→O+C2H2+. In particular, the role of the low-frequency acetylene bending modes (612 and 730 cm−1) in promoting charge transfer was examined. High-temperature guided-ion beam measurements are carried out over the energy range from near-thermal to 3 eV at 310 and 610 K. The charge-transfer cross sections are found to decrease up to 0.5 eV, to have a constant value at intermediate energies between 0.5 and 1.5 eV, and then to dramatically increase above a threshold of a spin-allowed process determined to be at 1.7 eV. A bending vibrational enhancement of ∼8 is observed at intermediate energies. Thermal energy rate co-efficients are measured in a variable temperature-selected ion flow drift tube apparatus from 193 to 500 K. At each temperature, a negative energy dependence is observed. In order to elucidate the reaction mechanism in detail, high level ab initio calculation...

Thermal electron attachment to the radical species C2F3 and C2F5 has been studied over the temperature range 300-890 K using the Variable Electron and Neutral Density Attachment Mass Spectrometry technique. Both radicals exclusively undergo dissociative attachment to yield F(-). The rate constant for C2F5 shows little dependence over the temperature range, remaining ~4 × 10(-9) cm(3) s(-1). The rate constant for C2F3 attachment rises steeply with temperature from 3 × 10(-11) cm(3) s(-1) at 300 K to 1 × 10(-9) cm(3) s(-1) at 890 K. The behaviors of both species at high temperature are in agreement with extrapolations previously made from data below 600 K using a recently developed kinetic modeling approach. Measurements were also made on C2F3Br and C2F5Br (used in this work as precursors to the radicals) over the same temperature range, and, for C2F5Br as a function of electron temperature. The attachment rate constants to both species rise with temperature following Arrhenius behavior. The attachment rate constant to C2F5Br falls with increasing electron temperature, in agreement with the kinetic modeling. The current data fall in line with past predictions of the kinetic modeling approach, again showing the utility of this simplified approach.

Rate constants for the reactions of O2(-) and O(-) with N and O atoms have been measured for the first time as a function of temperature from 173 to 500 K for O(-) reactions and 173 to 400 K for O2(-) reactions. Room temperature rate constants for O2(-) reacting with N and O are 3.1 × 10(-10) and 1.7 × 10(-10) cm(3) s(-1), respectively, and the corresponding O(-) rate constants are 1.7 × 10(-10) and 1.5 × 10(-10) cm(3) s(-1), in good agreement with previous values. Temperature dependences are about T(-1.7) for both O2(-) reactions and T(-0.6) and T(-1.3) for the reactions of O(-) with N and O, respectively. Branching for the O2(-) reaction with N is found to predominantly form O(-) (>85%) in contrast to previous measurements, which reported NO2 + e(-) as the main channel. Calculations point to the present results being correct. The potential energy surface for this reaction was calculated using density functional theory, coupled cluster with singles, doubles (triples), complete active space self-consistent field, and complete active space second-order perturbation methods and is found to be quite complex, with agreement between the calculated surface and the observed kinetic data only possible through the inclusion of dynamical correlation.

Thermal rate constants and product branching fractions for electron attachment to CF3Br and the CF3 radical have been measured over the temperature range 300-890 K, the upper limit being restricted by thermal decomposition of CF3Br. Both measurements were made in Flowing Afterglow Langmuir Probe apparatuses; the CF3Br measurement was made using standard techniques, and the CF3 measurement using the Variable Electron and Neutral Density Attachment Mass Spectrometry technique. Attachment to CF3Br proceeds exclusively by the dissociative channel yielding Br-, with a rate constant increasing from 1.1 x 10(-8) cm(3) s(-1) at 300 K to 5.3 x 10(-8) cm(3) s(-1) at 890 K, somewhat lower than previous data at temperatures up to 777 K. CF3 attachment proceeds through competition between associative attachment yielding CF3- and dissociative attachment yielding F-. Prior data up to 600 K showed the rate constant monotonically increasing, with the partial rate constant of the dissociative channel following Arrhenius behavior; however, extrapolation of the data using a recently proposed kinetic modeling approach predicted the rate constant to turn over at higher temperatures, despite being only similar to 5% of the collision rate. The current data agree well with the previous kinetic modeling extrapolation, providing a demonstration of the predictive capabilities of the approach.

Dissociative recombination of electrons with HCl+, H2Cl+, DCl+, and D2Cl+ has been measured under thermal conditions at 300, 400, and 500 K using a flowing afterglow–Langmuir probe apparatus. Measurements for HCl+ and DCl+ employed the variable electron and neutral density attachment mass spectrometry (VENDAMS) method, while those for H2Cl+ and D2Cl+ employed both VENDAMS and the more traditional technique of monitoring electron density as a function of reaction time. At 300 K, HCl+ and H2Cl+ recombine with kDR = 7.7±2.14.5 × 10−8 cm3 s−1 and 2.6 ± 0.8 × 10−7 cm3 s−1, respectively, whereas D2Cl+ is roughly half as fast as H2Cl+ with kDR = 1.1 ± 0.3 × 10−7 cm3 s−1 (2σ confidence intervals). DCl+ recombines with a rate coefficient below the approximate detection limit of the method (≲5 × 10−8 cm3 s−1) at all temperatures. Relatively slow dissociative recombination rates have been speculated to be responsible for the large HCl+ and H2Cl+ abundances in interstellar clouds compared to current astrochemical mod...

The chemi-ionization rate coefficients of La, Pr, Tb, and Ho with O have been measured from 200 to 450 K using a thermalized flow tube apparatus. Both La and Tb were found to react near the calculated hard sphere collision limit, while the Pr and Ho reactions proceeded at roughly 40% of that limit at all temperatures. The efficiencies of these reactions are considered and the near thermoneutral character of the reaction with Ho can explain this case, whereas an explanation for the inefficiency of the Pr reaction remains elusive. The chemi-ionization reaction of La with N2O was also studied and found to proceed roughly 2 orders of magnitude slower than the competing neutral oxidation pathway. The latter result disagrees with previous literature reports.

Mutual neutralization (MN) rate coefficients kMN for He(+) with the anions Cl(-), Br(-), I(-), and SF6 (-) are reported from 300 to 500 K. The measured rate coefficients may contain a contribution from transfer ionization, i.e., double ionization of the anion. The large rate coefficient for He(+) + SF6 (-) (2.4 × 10(-7) cm(3) s(-1) at 300 K) is consistent with earlier polyatomic MN results found to have a reduced mass dependence of μ(-1/2). Neutralization of He(+) by the atomic halides follows the trend observed earlier for Ne(+), Ar(+), Kr(+), and Xe(+) neutralized by atomic halides, kMN (Cl(-)) < kMN (Br(-)) < kMN (I(-)). Only an upper limit could be measured for the neutralization of He(+) by Cl(-). Predictions of the rate coefficients from a previously proposed simple model of atomic-atomic MN results are consistent with the present He(+)-halide rate coefficients. The temperature dependences are modestly negative for Br(-) and I(-), while that for SF6 (-) is small or negligible.

Rate coefficients k(MN) have been measured for a number of anion neutralization reactions with Ar(+) and Kr(+) over the temperature range 300-550 K. For the first time, the data set includes anions of radicals and other short-lived species. In the present paper, we review these results and make note of correlations with reduced mass, electron binding energy of the anion (equivalent to the electron affinity of the corresponding neutral), and temperature, and compare with expectations from absorbing sphere models. An intriguing result is that the data for diatomic anions neutralized by Ar(+) and Kr(+) have k(MN) values close to 3 × 10(-8) cm(3) s(-1) at 300 K, a figure which is lower than those for all of the polyatomic anions at 300 K except for SF(5)(-) + Kr(+). For the polyatomic anions studied here, neutralized by Ar(+) and Kr(+), the reduced mass dependence agrees with theory, on average, but we find a stronger temperature dependence of T(-0.9) than expected from the theoretical E(-0.5) energy dependence of the rate coefficient at thermal energies. The k(MN) show a weak dependence on the electron binding energy of the anion for the polyatomic species studied.

Thermal electron attachment to C(60) has been studied by relative rate measurements in a flowing afterglow Langmuir probe apparatus. The rate coefficients of the attachment k(1) are shown to be close to 10(-6) cm(3) s(-1) with a small negative temperature coefficient. These results supersede measurements from the 1990s which led to much smaller values of k(1) with a large positive temperature coefficient suggesting an activation barrier. Theoretical modeling of k(1) in terms of generalized Vogt-Wannier capture theory shows that k(1) now looks more consistent with measurements of absolute attachment cross sections sigma(at) than before. The comparison of capture theory and experimental rate or cross section data leads to empirical correction factors, accounting for "intramolecular vibrational relaxation" or "electron-phonon coupling," which reduce k(1) below the capture results and which, on a partial wave-selected level, decrease with increasing electron energy.

Studies of ion–molecule chemistry are usually made at pressures of a few Torr and below. By contrast, there are numerous plasmas that occur at higher pressures. For that reason we have constructed a turbulent ion flow tube (TIFT) for studying ion–molecule kinetics from 15 to 700 Torr. Currently, the TIFT operates from room temperature to 700 K. Here we present a summary of the measurements we have made to date. The first measurements involved SF6− reactions with SO2, H2O, CH3OH and C2H5OH at room temperature. The SO2 reaction showed the same kinetics as low pressure measurements indicating that the reaction occurs rapidly. The other reactions were all found to be cluster-mediated with branching fractions that depend on pressure. More recently, charge transfer reactions of O2+ to alkylbenzenes have been studied at elevated temperatures, from 400 to 700 K. Both dissociative and non-dissociative charge transfer occurs with the latter being favored at high pressures indicating that excited states live long enough to be stabilized by the buffer gas. Combining the TIFT measurements with detailed statistical adiabatic channel model/classical trajectory (SACM/CT) calculations of the unimolecular decay constant allows energy transfer parameters to be derived. Extending the temperature range upwards to 750 K has allowed thermal decomposition rate constants to be measured. The thermal decomposition has been successfully modeled using the same parameters as for the collision quenching modeling. This allows bond strengths for the dissociation to be derived with high accuracy. Both the measurements and models show that the conditions correspond to the high pressure kinetics regime.

The ion-ion mutual neutralization reactions Ar{sup +}+SF{sub n}{sup -}{yields}Ar+SF{sub n} (n=6, 5, and 4) have been studied in a flowing afterglow-Langmuir probe (FALP) apparatus at 300 K and 1 Torr of He buffer gas. Electron concentrations and product ion fractions were measured, and neutralization rate constants of 4.0x10{sup -8}, 3.8x10{sup -8}, and 4x10{sup -8} cm{sup 3} s{sup -1} for SF{sub 6}{sup -}, SF{sub 5}{sup -}, and SF{sub 4}{sup -}, respectively, were derived, with uncertainties of {+-}25% ({+-}35% for SF{sub 4}{sup -}). During the neutralization process, excited neutrals are generated that are able to dissociate to neutral fragments. In the case of SF{sub 6}, the formation of SF{sub 5} and SF{sub 4}, and similarly in the case of SF{sub 5}, the formation of SF{sub 4} and SF{sub 3} were observed and quantified. The mechanism of primary and secondary reaction was analyzed in detail, and rate constants for the dissociative electron attachments e{sup -}+SF{sub 5}{yields}F{sup -}+SF{sub 4} (k=3x10{sup -9} cm{sup 3} s{sup -1},{+-}40%) and e{sup -}+SF{sub 3}{yields}F{sup -}+SF{sub 2} (k=2x10{sup -8} cm{sup 3} s{sup -1},+400%,-75%) were also derived. The experimental ion-ion neutralization rate constants were found to be in good agreement with estimates from an optimum two-state double-passage Landau-Zener model. It wasmore » also found that energy partitioning in the neutralization is related to the extent of electronic excitation of Ar generated by the electron transfer processes.« less

The thermal attachment of electrons to SF(6) is measured in a flowing-afterglow Langmuir-probe apparatus monitoring electron concentrations versus axial position in the flow tube. Temperatures between 300 and 670 K and pressures of the bath gas He in the range of 0.3-9 Torr are employed. Monitoring the concentrations of SF(6)(-) and SF(5)(-), the latter of which does not detach electrons under the applied conditions, an onset of thermal detachment and dissociation of SF(6) at temperatures above about 530 K is observed. Analysis of the mechanism allows one to deduce thermal detachment rate coefficients. Thermal dissociation rate coefficients for the reaction SF(6)(-)--SF(5)(-)+F can only be estimated by unimolecular rate theory based on the results from Part I and II of this series. Under the applied conditions they are found to be smaller than detachment rate coefficients. Combining thermal attachment and detachment rates in a third-law analysis, employing calculated vibrational frequencies of SF(6) and SF(6)(-), leads to the electron affinity (EA) of SF(6)(-). The new value of EA=1.20(+/-0.05) eV is significantly higher than previous recommendations which were based on less direct methods.

Low-energy electron-molecule collisions, leading to dissociative attachment through metastable anionic states, are kinetically modeled within the framework of statistical unimolecular rate theory. The reaction e(-)+SF(6)--SF(5)(-)+F is used as an illustrative example. The modeling is applied to new measurements of branching fractions for SF(5)(-) formation in the bath gas He between 360 and 670 K at 1 and 2 Torr, and between 490 and 620 K over the range of 0.3-9 Torr. The analysis of the data follows the previous kinetic modeling of the nondissociative electron attachment, e(-)+SF(6)--SF(6)(-), from Part I of this series. Experimental results from the present work and the literature on branching fractions and total cross sections for anion formation as functions of electron energies, bath gas temperatures and pressures, as well as observation times are analyzed. The assumption of a participation of the electronic ground state of SF(6)(-) alone suffices to model the available experimental data. A value of the dissociation energy of SF(6)(-) into SF(5)(-)+F of E(0,dis)=1.61(+/-0.05) eV is determined, which may be compared to the electron affinity of SF(6), EA=1.20(+/-0.05) eV, such as derived in Part III of this series.

We have measured the temperature-dependent kinetics for the reactions of OH(+) with H2 and D2 using a selected ion flow tube apparatus. Reaction occurs via atom abstraction to result in H2O(+)/HDO(+) + H/D. Room temperature rate coefficients are in agreement with prior measurements and resulting temperature dependences are T(0.11) for the hydrogen and T(0.25) for the deuterated reactions. This work is prompted in part by recent theoretical work that mapped a full-dimensional global potential energy surface of H3O(+) for the OH(+) + H2 → H + H2O(+) reaction [A. Li and H. Guo, J. Phys. Chem. A 118, 11168 (2014)], and reported results of quasi-classical trajectory calculations, which are extended to a wider temperature range and initial rotational state specification here. Our experimental results are in excellent agreement with these calculations which accurately predict the isotope effect in addition to an enhancement of the reaction rate constant due to the molecular rotation of OH(+). The title reaction is of high importance to astrophysical models, and the temperature dependence of the rate coefficients determined here should now allow for better understanding of this reaction at temperatures more relevant to the interstellar medium.

Rate coefficients and product branching fractions for electron attachment and for reaction with Ar(+) are measured over the temperature range 300-585 K for three monohydrogenated fluorocarbon (HFC) radicals (CF3CHF, CHF2CF2, and CF3CHFCF2), as well as their five closed-shell precursors (1-HC2F4I, 2-HC2F4I, 2-HC2F4Br, 1-HC3F6I, 2-HC3F6Br). Attachment to the HFC radicals is always fairly inefficient (between 0.1% and 10% of the Vogt-Wannier capture rate), but generally faster than attachment to analogous perfluorinated carbon radicals. The primary products in all cases are HF-loss to yield C(n)F(m-1)(-) anions, with only a minor branching to F(-) product. In all cases the temperature dependences are weak. Attachment to the precursor halocarbons is near the capture rate with a slight negative temperature dependence in all cases except for 2-HC2F4Br, which is ∼10% efficient at 300 K and becomes more efficient, approaching the capture rate at higher temperatures. All attachment kinetics are successfully reproduced using a kinetic modeling approach. Reaction of the HFC radicals with Ar(+) proceeds at or near the calculated collisional rate coefficient in all cases, yielding a wide variety of product ions.

A number of aspects of ionospheric chemistry are revisited. The review discusses in detail only work performed at AFRL, but other work is mentioned. A large portion of the paper discusses measurements of the kinetics of upper ionospheric reactions at very high temperatures, i.e. the upper temperature range has been extended to at least 1400 K and in some cases to 1800 K. These temperatures are high enough to excite vibrations in O2, N2, and NO and comparing them to drift tube data allows information on the rotational temperature and vibrational level dependences to be derived. Rotational and translational energy are equivalent in controlling the kinetics in most reactions. Vibrational energy in O2 and N2 is often found to promote reactivity which is shown to cause ionospheric density depletions. NO vibrations do not significantly affect the reactivity. In a number of cases, detailed calculations accompanied the experimental studies and elucidated details of the mechanisms. Kinetics of two peroxide isomers important in the lower ionospheric have been measured for the first time, i.e. NOO+ and ONOO−. Finally, two examples are shown where errors in previous data are corrected.

The binary mutual neutralization (MN) of a series of 17 cations (O₂⁺, NO(+), NO₂⁺, CO(+), CO₂⁺, Cl(+), Cl₂⁺, SO₂⁺, CF₃⁺, C₂F₅⁺, NH₃⁺, H₃⁺, D₃⁺, H2O(+), H3O(+), ArH(+), ArD(+)) with 3 halide anions (Cl(-), Br(-), I(-)) has been investigated in a flowing afterglow-Langmuir probe apparatus using the variable electron and neutral density attachment mass spectrometry technique. The MN rate constants of atom-atom reactions are dominated by the chemical nature of the system (i.e., the specific locations of curve crossings). As the number of atoms in the system increases, the MN rate constants become dominated instead by the physical nature of the system (e.g., the relative velocity of the reactants). For systems involving 4 or more atoms, the 300 K MN rate constants are well described by 2.7 × 10(-7) μ(-0.5), where the reduced mass is in Da and the resulting rate constants in cm(3) s(-1). An upper limit to the MN rate constants appears well described by the complex potential model described by Hickman assuming a cross-section to neutralization of 11,000 Å(2) at 300 K, equivalent to 3.5 × 10(-7) μ(-0.5).

We report thermal rate coefficients for 12 reactions of rare gas cations (Ne(+), Ar(+), Kr(+), Xe(+)) with halide anions (Cl(-), Br(-), I(-)), comprising both mutual neutralization (MN) and transfer ionization. No rate coefficients have been previously reported for these reactions; however, the development of the Variable Electron and Neutral Density Attachment Mass Spectrometry technique makes it possible to measure the difference of the rate coefficients for pairs of parallel reactions in a Flowing Afterglow-Langmuir Probe apparatus. Measurements of 18 such combinations of competing reaction pairs yield an over-determined data set from which a consistent set of rate coefficients of the 12 MN reactions can be deduced. Unlike rate coefficients of MN reactions involving at least one polyatomic ion, which vary by at most a factor of ∼3, those of the atom-atom reactions vary by at least a factor 60 depending on the species. It is found that the rate coefficients involving light rare-gas ions are larger than those for the heavier rare-gas ions, but the opposite trend is observed in the progression from Cl(-) to I(-). The largest rate coefficient is 6.5 × 10(-8) cm(3) s(-1) for Ne(+) with I(-). Rate coefficients for Ar(+), Kr(+), and Xe(+) reacting with Br2 (-) are also reported.

We have studied the dependence of several ion-ion mutual neutralization (MN) reactions on helium density in the range from 1.6 × 10(16) to 1.5 × 10(17) cm(-3) at 300 K, using the Variable Electron and Neutral Density Attachment Mass Spectrometry method. The rate coefficients of the reactions Ar(+) + Br2(-), Ar(+) + SF6(-), and Ar(+) + C7F14(-) were found to be independent of gas density over the range studied, in disagreement with earlier observations that similar MN reactions are strongly enhanced at the same gas densities. The cause of the previous enhancement with density is traced to the use of "orbital-motion-limit" theory to infer ion densities from the currents collected by ion-attracting Langmuir probes in a region where it is not applicable.

A novel technique using a flowing afterglow-Langmuir probe apparatus for measurement of temperature dependences of rate constants for dissociative recombination (DR) is presented. Low (∼1011 cm−3) concentrations of a neutral precursor are added to a noble gas/electron afterglow plasma thermalized at 300–500 K. Charge exchange yields one or many cation species, each of which may undergo DR. Relative ion concentrations are monitored at a fixed reaction time while the initial plasma density is varied between 109 and 1010 cm−3. Modeling of the decrease in concentration of each cation relative to the non-recombining noble gas cation yields the rate constant for DR. The technique is applied to several species (O2+, CO2+, CF3+, N2O+) with previously determined 300 K values, showing excellent agreement. The measurements of those species are extended to 500 K, with good agreement to literature values where they exist. Measurements are also made for a range of CnHm+ (C7H7+, C7H8+, C5H6+, C4H4+, C6H5+, C3H3+, and C6...

The ion-molecule reactions F-e+ + N2O -> FeO+ + N-2 and FeO+ + CO -> Fe+ + CO2, which catalyze the reaction CO + N2O -> CO2 + N-2, have been studied over the temperature range 120-700 K using a variable temperature selected ion flow tube apparatus. Values of the rate constants for the former two reactions were experimentally derived as k(2) (10(-11) cm(3) s(-1)) = 2.0(+/- 0.3) (T/300)(-1.5(+/- 0.2)) + 6.3(+/- 0.9) exp(-515(+/- 77)/T) and k(3) (10(-10) cm(3) s(-1)) = 3.1(+/- 0.1) (T/300)(-0.9(+/- 0.1)). Characterizing the energy parameters of the reactions by density functional theory at the B3LYP/TZVP level, the rate constants are modeled, accounting for the intermediate formation of complexes. The reactions are characterized by nonstatistical intrinsic dynamics and rotation-dependent competition between forward and backward fluxes. For Fe+ + N2O, sextet-quartet switching of the potential energy surfaces is quantified. The rate constant for the clustering reaction FeO+ + N2O + He -> FeO(N2O)(+) + He was also measured, being k(4) (10(-27) cm(6) s(-1)) = 1.1(+/- 0.1) (T/300)(-2.5(+/- 0.1)) in the low pressure limit, and analyzed in terms of unimolecular rate theory.

Experimental data from the literature for cross sections and rate constants for dissociative electron attachment to CF(3)Br, with separately varied electron and gas temperatures, are analyzed by a kinetic modeling approach. The analysis suggests that electronic and nuclear contributions to the rate constants can be roughly separated, the former leading to a negative temperature coefficient, the latter to a positive temperature coefficient. The nuclear factor in the rate constant is found to be of Arrhenius form with an activation energy which is close to the energy of crossing of the CF(3)Br and CF(3)Br(-) potential curves along the CBr bond.

Previously determined experimental data for thermal attachment of electrons to SF(6) and thermal detachment from SF(6)(-) over the range 590-670 K are reevaluated by a third-law analysis. Recent high precision calculations of SF(6)(-) harmonic frequences and anharmonicities (for several of the modes) lead to considerable changes in modeled vibrational partition functions which then have to be accommodated for by a smaller value of the derived adiabatic electron affinity EA of SF(6). The previously estimated value of EA = 1.20 (±0.05) eV in this way is reduced to a value of EA = 1.03 (±0.05) eV. In addition, the bond dissociation energy E(0,dis) for SF(6)(-) → SF(5)(-) + F is reduced to E(0,dis) = 1.44 (±0.05) eV. Finally, the consequences for modeled specific rate constants k(det)(E,J) of electron detachment from SF(6)(-) are discussed.