Search

This study was conducted to investigate soil quality, Chinese cabbage growth, and N2O emission after biochar application in an upland field in South Korea. Each of the barley straw biochar (BC, applied at 10 ton ha-1), inorganic fertilizer (IF, applied at N-P-K = 320-78-198 kg ha-1), and BC + IF treatment areas were separated by a control (Cn) treatment area. Soils treated with BC and BC + IF treatments had lower bulk density and higher porosity than those in the Cn treatment areas. Soil chemical properties (pH, TN, Avail. P2O5, and CEC) after biochar addition were improved. In particular, soil pH and CEC related to crop nutrient availability were significantly increased in BC areas compared to those in Cn and IF areas. Fresh weights of Chinese cabbage grown under BC, IF, and BC + IF treatment conditions increased by 64.9, 78.4, and 112.0%, respectively, over that in the Cn treatment area. Total nutrient (TN, TP, and K) uptakes among the treatment areas were, in declining order, BC + IF (14.51 g plant-1) > IF > BC > Cn. More interestingly, the BC application had a positive effect on growth of Chinese cabbage under IF application conditions, and there was a tight relationship between the effect of BC application on Chinese cabbage growth and that of agronomic IF application efficiency. Compared to the IF results, total N2O flux was lower with BC (flux decreased by 60.6%) or BC + IF (flux decreased by 22.3%) treatments. These results indicate that Chinese cabbage yield, when cultivated in soil conditions such as those in an upland field in South Korea, can be increased by application of BC or a combination of BC and IF.

This study was conducted to establish the optimal application conditions of barley straw biochar (BC) for rice cultivation and to determine the effects of combined application of BC and inorganic fertilizer (IF) on rice cultivation in a paddy field. Based on the characteristics of rice growth in pot-based experiments, the selected optimal application conditions of BC were application of 20 ton ha−1 at 14 days before rice transplanting. The effects of BC application on rice cultivation in a paddy field when using those conditions were then evaluated. Each treatment was separated by a control (Cn), IF, BC, and combined BC + IF treatments, respectively. The rice yields in the BC + IF treatment were 38.6, 21.7, and 24.5% greater than those in the Cn, IF, and BC treatments, respectively. In addition, yield components of rice were significantly improved in the BC + IF treatment relative to the other treatments. Following rice harvest, soil status was improved, showing greater soil aggregation stability, decreased bulk density, and increased porosity in the BC-treated areas compared to those in the Cn- and IF-treated areas. At the time of rice harvesting, soil chemical properties such as pH, EC, SOC, TN, Avail. P2O5, and CEC in the BC-treated areas were improved over those in other areas. The results of this study indicate that using BC as a soil amendment is effective at improving rice cultivation and can benefit the soil environment.

A 2-year field experiment was carried out on rice (Oryza sativa, Japonica type) cultivation in South Korea. The objective of this study was to investigate the effect of application of liquid pig manure on biomass production and nutrient supply of green barley (Hordeum vulgare L.) and hairy vetch (Vicia villosa Roth) green manure crops and to evaluate the effect of nutrients supplied from these sources on rice yield and soil quality in a rice-green manure crop rotation system. Over the 2-year study period, application of liquid pig manure increased biomass production of green manure crops of barley and hairy vetch by more than 216% and 135%, respectively, compared with without liquid pig manure. Moreover, the results showed that the application of liquid pig manure significantly increased the nutrient supply levels in green barley- and hairy vetch-treated areas. Positive effects related to nutrient supply in green barley and hairy vetch treated with liquid pig manure were observed on rice yield, soil chemical characteristics, and microbial biomass C and N contents. In conclusion, the addition of liquid pig manure systems using green manure crops of green barley and hairy vetch improved rice productivity and soil quality. It is suggested that these combinations can be effective in developing resource cycling agriculture in a rice-green manure crop rotation system as it reduces the need for inorganic fertilizer.

BACKGROUND: Clay mineral is well known to improve physico-chemical of soil. The objective of this study was to investigate the growth characteristics and inorganic nutrient contents of crops with application levels of phyllite.METHODS AND RESULTS: Both young radish and lettuce were selected as target crops for this study. The experiment was conducted in a wagner pot(1/5000a) in glass house at Sunchon National University. Treatment conditions were divided P0NPK(No phyllite + NPK), P5NPK(phyllite 5 Mg/ha + NPK), P10NPK(phyllite 10 Mg/ha + NPK) and P15NPK(phyllite 15 Mg/ha + NPK) by crops, respectively. Bulk density and porosity of soil in control without treatment conditions were ranged from 1.02 ∼1.04 g/cm3 and 56.5∼57.0%, respectively, and those for treatments with phyllite were in the ranged from 0.94∼1.00 g/cm3 and 58.4∼63.5%, respectively. Dry weights of young radish and lettuce were higher in P15NPK treatment than those in other treatments. The amounts of T-N, T-P and K uptake in young radish with phyllite application treatments were increased 36∼115, 18∼67 and 20∼76% than without phyllite application treatment, respectively. In lettuce treatments, amounts of T-N, T-P and K uptake were intended to all tested treatments similar with result of young radish treatment.CONCLUSION: Therefore, these results confirm that phyllite application to the soil improves physico-chemical of soil in addition to improving growth of young radish and lettuce.

The purpose of this study was to produce rendering animal carcass residue char (RACR-C) by pyrolyzing the solid residues of low-recyclable rendered pig carcasses and to evaluate their cadmium (Cd) adsorption characteristics and mechanisms. As the pyrolysis temperature increased, the inorganic content of RACR-C increased, while the carbon content decreased. In particular, the surface structure and chemistry of RACR-Cs prepared at different pyrolysis temperatures were well described by SEM-EDS, XRD, XRF, TGA, and FTIR. The Cd adsorption characteristics of RACR-C were in good agreement with the Langmuir isotherm and pseudo-second-order models, and the Cd adsorption capacities of RACR-Cs prepared at various pyrolysis temperatures were in the order of RACR-C500 (73.5 mg/g) > RACR-C600 (53.8 mg/g) > RACR-C400 (41.5 mg/g) " RACR-C250 (15.9 mg/g). The intraparticle diffusion model suggested that the adsorption of Cd by RACR-C is greatly influenced by internal diffusion as well as external boundary. Since the Cd adsorption capacity of RACR-C is greatly influenced by the initial dosage, pH, and co-existing metals, it is necessary to manage these influencing factors when treating wastewater containing heavy metals. Our results suggest that Cd adsorption by RACR-C is a complex adsorption phenomenon by various mechanisms such as adsorption by functional group (C˭C and C-O), precipitation of Cd-P and ion exchange reaction by exchangeable cation occurring rather than by a single specific mechanism.

Objective of this research was to evaluate adsorption of heavy metals in mono and multimetal forms onto sesame straw biochar (SSB). Competitive sorption of metals by SSB has never been reported previously. The maximum adsorption capacities (mgg(-1)) of metals by SSB were in the order of Pb (102)≫Cd (86)≫Cr (65)>Cu (55)≫Zn (34) in the monometal adsorption isotherm and Pb (88)≫Cu (40)≫Cr (21)>Zn (7)⩾Cd (5) in the multimetal adsorption isotherm. Based on data obtained from the distribution coefficients, Freundlich and Langmuir adsorption models, and three-dimensional simulation, multimetal adsorption behaviors differed from monometal adsorption due to competition. Especially, during multimetal adsorption, Cd was easily exchanged and substituted by other metals. Further competitive adsorption studies are necessary in order to accurately estimate the heavy metal adsorption capacity of biochar in natural environments.

To investigate the long-term nitrogen treatment efficiency in vertical-flow (VF)-horizontal-flow (HF) hybrid constructed wetlands (CWs), the nitrogen removal efficiency under different seasons, N loads, and three operating stages (representing age of the wetland) were evaluated over a 12-year period. The average total nitrogen (TN) removal efficiencies in the effluent during the operation period were in the following order: summer (75.2%) spring (73.4%) ≒ autumn (72.6%) winter (66.4%). The removal efficiencies of TN in summer, autumn, and spring were generally higher than those in winter. At different stages of operation (years), the average TN removal rates in the effluent were in the following order: middle stage (73.4%; years 2006-2009) last stage (72.0%; years 2010-2013) beginning stage (70.1%; years 2002-2005). In VF-HF CWs, the amount of average TN removal (mg N m(-2) day(-1)) over the 12-year period was in the order of summer (5.5) ≒ autumn (5.1) spring (4.3) ≒ winter (4.2) for the VF bed and in the order of summer (3.5) ≒ spring (3.5) ≒ autumn (3.3) winter (2.7) for the HF bed, showing that the amount of TN removal per unit area (m(2)) in summer was slightly greater than that in other seasons. The amount of TN removal in the VF bed was slightly greater than that in the HF bed. Using three-dimensional simulation graphs, the maximum TN removal rate was at inflow N loads below 2.7 g m(-2) day(-1) in the summer season, whereas the minimum TN removal rate was at inflow N loads below 1.4 g m(-2) day(-1) in the winter season. Consequently, the TN removal efficiency was very stable over the 12 years of operation in VF-HF hybrid CWs. Results demonstrate that the VF-HF hybrid CWs possess good buffer capacity for treating TN from domestic sewage for extended periods of time.

The phosphorus (P) adsorption characteristic of sesame straw biochar prepared with different activation agents and pyrolysis temperatures was evaluated. Between 0.109 and 0.300 mg L−1 in the form of inorganic phosphate was released from raw sesame straw biochar in the first 1 h. The release of phosphate was significantly enhanced from 62.6 to 168.2 mg g−1 as the pyrolysis temperature increased. Therefore, sesame straw biochar cannot be used as an adsorbent for P removal without change in the physicochemical characteristics. To increase the P adsorption of biochar in aqueous solution, various activation agents and pyrolysis temperatures were applied. The amount of P adsorbed from aqueous solution by biochar activated using different activation agents appeared in the order ZnCl2 (9.675 mg g−1) > MgO (8.669 mg g−1) ⋙ 0.1N-HCl > 0.1N-H2SO4 > K2SO4 ≥ KOH ≥ 0.1N-H3PO4, showing ZnCl2 to be the optimum activation agent. Higher P was adsorbed by the biochar activated using ZnCl2 under different pyrolysis temperatures in the order 600 °C > 500 °C > 400 °C > 300 °C. Finally, the amount of adsorbed P by activated biochar at different ratios of biochar to ZnCl2 appeared in the order 1:3 ≒ 1:1 > 3:1. As a result, the optimum ratio of biochar to ZnCl2 and pyrolysis temperature were found to be 1:1 and 600 °C for P adsorption, respectively. The maximum P adsorption capacity by activated biochar using ZnCl2 (15,460 mg kg−1) was higher than that of typical biochar, as determined by the Langmuir adsorption isotherm. Therefore, the ZnCl2 activation of sesame straw biochar was suitable for the preparation of activated biochar for P adsorption.

Recycling food waste for beneficial use is becoming increasingly important in resource-limited economy. In this study, waste chicken bones of different parts from restaurant industry were pyrolyzed at 600 °C and evaluated for char physicochemical properties and Pb sorption characteristics. Lead adsorption isotherms by different chicken bone chars were carried out with initial Pb concentration range of 1–1000 mg L−1 at pH 5. The Pb adsorption data were better described by the Langmuir model (R2 = 0.9289–0.9937; ARE = 22.7–29.3%) than the Freundlich model (R2 = 0.8684–0.9544; ARE = 35.4–72.0%). Among the chars derived from different chicken bone parts, the tibia bone char exhibited the highest maximum Pb adsorption capacity of 263 mg g−1 followed by the pelvis (222 mg g−1), ribs (208 mg g−1), clavicle (179 mg g−1), vertebrae (159 mg g−1), and humerus (135 mg g−1). The Pb adsorption capacities were significantly and positively correlated with the surface area, phosphate release amount, and total phosphorus content of chicken bone chars (r ≥ 0.9711). On the other hand, approximately 75–88% of the adsorbed Pb on the chicken bone chars was desorbable with 0.1 M HCl, indicating their recyclability for reuse. Results demonstrated that chicken bone char could be used as an effective adsorbent for Pb removal in wastewater.

BACKGROUND: Soil incorporation of green manure crop(GMC) is one of the methods for reducing continuous cropping injury and increasing yield of carrot. The purpose of this study was to evaluate the effects of green manure crops on growth and yield of carrot for reduction of continuous cropping injury of carrot through crop rotation. METHODS AND RESULTS: To reduce the injury by continuous cropping system(CCS) of carrot cultivation, GMCs such as crotalaria and sudangrass were applied, which GMC was sowed in latter-June and returned to soil in latter-October. Nutrient contributions of N, P2O5, K2O, CaO, and MgO in crotalaria were 8.3, 7.5, 4.4, 7.8, and 2.1 kg/10a, respectively. Nutrient contributions of N, P2O5

Effect of Incorporation Times of Green Barley and Hairy Vetch on Rice Yield in Paddy Soil with Liquid Pig Manure Se-Won Kang, Dong-Cheol Seo, Sang-Gyu Lee, Young-Jin Seo, Ju-Wang Park, Jin-Hee Ryu, Min-Tae Kim, Hang-Won Kang, Jong-Soo Heo and Ju-Sik Cho (Department of Bio-Environmental Sciences, Sunchon National University, National Institute of Crop Science, Rural Development Administration, Division of Applied Life Science(BK21 program) & Institute of Agriculture and Life Science, Gyeongsang National University)

BACKGROUND: Globally, concern about emerging infectious diseases of livestock is growing. For the disposal of the animal carcass, it is necessary to recycle the carcass into an agriculturally usable product. The objective of this study was to investigate the composting conditions of liquid by-product obtained from degradation of animal carcass. METHODS AND RESULTS: Optimum conditions of liquid fertilizer were investigated using different microorganisms, pHs, and volumes of microorganisms (Lactobacillus rhamnosus+Pichia deserticola). Based on the results from the optimum conditions, compost maturity and quality of liquid fertilizer were evaluated for 112 days. The compost maturity of liquid fertilizer were higher in the order of LP(Lactobacillus rhamnosus + Pichia deserticola) > BC(Bacillus cereus) > BS(Bacillus subtilis). The optimum condition under different volumes of LP was injection of 0.5 mL/100 mL. The compost maturity under different pHs were higher in the order of pH 7 > . The liquid by-product at 56 days after composting was completely decomposed. The concentrations of T-N, T-P and in liquid fertilizer at 56 days were 0.94, 0.17 and 3.78%, respectively, and the sum of those concentrations was 4.89%. CONCLUSION(S): Liquid fertilizer of by-product using pig carcass was decomposed with optimum conditions(LP, pH 7, injection of 0.5 mL/100 mL) in 56 days after composting, and was suitable for official standard of commercial fertilizer.

BACKGROUND: Eutrophication occurs occasionally in reservoirs around lake in summer and early autumn. Lakeside macrophyte which is one of internal pollutants effects on water quality when it is submerged during rainy season. To improve water quality of water supply source in Boknae reservoir around Juam lake, characteristics of nutrient(N, P) uptake and release by submerged plants were investigated. METHODS AND RESULTS: In order to establish the management plan of submerged plants in Boknae reservoir around Juam lake, water level, rainfall, flooding and non-flooding areas, biomass of dominant plants, contents of nitrogen and phosphorus were investigated during 7 months(August, 2010 through February, 2011). Dominant plants were Miscanthus sacchariflorus(MISSA) and Carex dimorpholepis(CRXDM) in Boknae reservoir. Total plant area of Boknae reservoir in August, 2010 was 987,872 . In Boknae reservoir, flooding occurred from August until February caused by rainfall during rainy season. The total amounts of nitrogen and phosphorus uptakes by MISSA were 247 and 22 kg/total reservoir area, respectively. By CRXDM, the total amounts of nitrogen and phosphorus uptakes were 11,340 and 1,231 kg/total reservoir area, respectively. The total amounts of nitrogen and phosphorus residues by MISSA were 34 and 11 kg/total reservoir area, respectively. By CRXDM, the total amounts of nitrogen and phosphorus residues were 491 and 68 kg/total reservoir area, respectively. CONCLUSION(S): Total amounts of nitrogen and phosphorus releases in Boknae reservoir were 12,212 and 1,324 kg/total reservoir area, respectively. The results demonstrate that total nitrogen and total phosphorus in water were strongly influenced by submerged plants. Therefore, management plan for submerged plants during rainy season will be needed to improve water quality of water supply source in Boknae reservoir around Juam lake.

BACKGROUND: To design and develop a constructed wetland for effective livestock wastewater treatment, it is necessary to understand the removal mechanisms of various types of pollutants in constructed wetlands. The objective of this study was to evaluate the treatment efficiency of pollutants under different types of fraction in constructed wetland system for treating piggery wastewater.METHODS AND RESULTS: The piggery wastewater treatment plant that consisted of activated sludge tank, aerobic and anaerobic beds was constructed. The concentration of COD(Chemical oxygen demand) in effluent by fraction was 71.5 mg/L for soluble COD, 142 mg/L insoluble COD. The concentration of SS(Suspended solid) in effluent by existing form was 102 mg/L for vola tile SS, 15.5 mg/L for fixed SS. The concentration of T-N(Total nitrogen) and T-P(Total phosphorus) in effluent by existing form were 12.8 mg/L and 3.05 mg/L for dissolved form, 35.0 mg/L and 1.93 mg/L for suspended form. The removal efficiencies of COD, SS, T-N and T-P in hot season(summer and autumn) were higher than those in cold season(spring and winter). The removal efficiencies of COD, SS, T-N and T-P in effluent were 98.0, 99.0, 98.2 and 99.2% for all seasons, respectively.CONCLUSION(S) : The results indicated that removal types of pollutants were insoluble COD(ICOD), volatile SS(VSS), dissolved T-N(DTN) and dissolved T-P(DTP) in constructed wetlands for treating piggery wastewater.Key Words: Avtivated sludge, Constructed wetlands, Fraction of pollutants, Piggery wastewaterResearch Article Open Access

BACKGROUND: Constructed wetlands for wastewater treatment are vegetated by wetland plants. Wetland plants are an important component of wetlands, and the plants have several roles in relation to the livestock wastewater treatment processes. The objectives of this study were to investigate the growth characteristics and nutrient absorption of water plants in constructed wetlands for treating livestock wastewater. METHODS AND RESULTS: In this study, livestock wastewater treatment plant by constructed wetlands consisted of water plant filtration bed, activated sludge bed, vertical flow(VF), horizontal flow(HF) and HF beds. Phragmites communis TRINIUS(PHRCO) was transplanted in VF bed, Iris pseudoacorus L(IRIPS) was transplanted in HF bed and PHRCO, IRIPS and Typha orientalis PRESEL(THYOR) were transplanted in HF. Growth of water plants in constructed wetlands were the highest in October. The IRIPS growth was higher than other plant as 264 g/plant in October. The absorption of nitrogen and phosphorus by IRIS were 3.38 g/plant and 0.634 g/plant, respectively. The absorption of K, Ca, Mg, Na, Fe, Mn, Cu and Zn by water plants were higher in the order of IRIPS > THYOR > PHRCO. CONCLUSION(S): The absorption of nutrients by water plants were higher on the order of IRIPS > THYOR > PHRCO in constructed wetlands for treating livestock wastewater.

BACKGROUND: Heavy-metal pollution represents an important environmental problem due to the toxic effects of metals, and their accumulation throughout the food chain leads to serious ecological and health problems. METHODS AND RESULTS: Optimum conditions in continuous-flow stirred tank reactor (CSTR) and packedbed column contactor (PBCC) using brown seaweed biosorbent were investigated. Under optimum conditions from both lab-scale biosorbent systems, removal efficiency of copper (Cu) in a large-scale PBCC system was investigated. Removal capacity of Cu using brown seaweed biosorbent in a lab-scale CSTR system was higher than that in a lab-scale PBCC system. On the other hand, over 48 L/day of flow rate in Cu solution, removal efficiency of Cu in a lab-scale PBCC system was higher than that in a lab-scale CSTR system. Optimum flow rate of Cu was 24 L/day, optimum Cu solution concentration was 100 mg/L. Removal capacity of Cu at different stages was higher in the order of double column biosorption system > single column biosorption system. Under different heavy metals, removal capacities of heavy metal were higher in the order of Pb > Cr > Ni > Mn Cu Cd Zn Co. Removal capacity of Cu was 138 L in a large-scale PBCC system. Removal capacity of Cu a large-scale PBCC system was similar with in a lab-scale PBCC system. CONCLUSION(s): Therefore, PBCC system using brown seaweed biosorbent was suitable for treating heavy metal wastewater.

BACKGROUND: Generally, water plants may play an important role in nutrients(N, P) removal in constructed wetlands(CWs). Previous studies considered nutrients uptake by water plants in various CWs for treating point source pollution. On the other hand, few studies considered nutrients uptake by water plants in free water surface(FWS) CWs for treating non-point source pollution. METHODS AND RESULTS: To investigate characteristics of nutrient uptake by water plants in FWS CWs, dry weights, nutrients content and nutrients uptake by water plants were investigated from April, 2008 to October, 2008. Dominance plants were Phragmites japonica STEUD (PHRJA), Nymphaea tetragona ANGUSTA(NTMTE), Typha orientalis PRESL(TYHOR), Phragmites communis TRINIUS(PHRCO) and Zizanis latifolia TURCZ(ZIZLA) in FWS CWs. The dry weights of water plants in August were higher in the order of TYHOR(54.27 g/plant) > PHRJA(44.30 g/plant) ≧ PHRCO(39.60 g/plant) ≧ ZIZLA(37.80 g/plant) ≒ NTMTE(36.75 g/plant). The T-N and T-P contents by water plants were not significantly differences regardless of cultivation period. The maximum amount of T-N uptake by water plants in August were 773 mg/plant for PHRJA, 625 mg/plant for NTMTE, 1206 mg/plant for TYHOR, 754 mg/plant for PHRCO and 768 mg/plant for ZIZLA. The maximum amounts of T-P uptake by PHRJA, NTMTE, TYHOR, PHRCO and ZIZLA were 397, 177, 411, 261 and 229 mg/plant in August, respectively.

BACKGROUND: Eutrophication occurs occasionally in flood control reservoirs around Juam lake in summer and early autumn. Lakeside macrophyte which is one of internal pollutants effects on water quality when it is submerged during water surface is rising after rainy season. METHODS AND RESULTS: To improve water the quality of water from water supply source and to establish the management plan of submerged plants in flood control reservoirs around Juam Lake, the removal and release velocities of nutrients by submerged plants in site 1 and 2 were investigated. Removal or release velocity constant (K) of COD by Carex dimorpholepis Steud in column was 0.07~0.18 at 0~4 days after flooding, -0.23~-0.17 at 5~19 days after flooding and -0.28~0.03 at 20~33 days after flooding. Removal or release velocity constant (K) of T-N by Carex dimorpholepis Steud was 0.02 at 0~4(8) days after flooding, -0.13~-0.10 at 5(9)~33 days after flooding in column. Removal or release velocity constant (K) of T-P by Carex dimorpholepis Steud was 0.05~0.06 at 0~4 days after flooding, -0.14~-0.09 at 5~33 days after flooding. Release velocity constant (K) of nutrients by Miscanthus sacchariflorus Benth was lower than that by Carex dimorpholepis Steud. In site 1, the amount of nutrients release by Carex dimorpholepis Steud was 6,719 kg/month/area for COD, 2,397 kg/month/area for T-N and 466 kg/month/area for T-P. The amounts of nutrients release by Carex dimorpholepis Steud were higher than those by Miscanthus sacchariflorus Benth in both sites. CONCLUSION(s): The results of this study suggest that COD, T-N and T-P in water quality of Juam lake were strongly influenced by submerged plants in flood control reservoirs.

In order to improve T-N and T-P removal in HF (horizontal flow)-HF hybrid constructed wetlands by natural purification method for treating the hydroponic wastewater in greenhouses, the efficiency of water treatment as affected by the injection method of hydroponic wastewater, the addition of special filter media, the particle size of filter media, and the injection ratio of hydroponic wastewater in HF and HF beds were investigated in small-scale HF-HF hydroponic wastewater treatment apparatus. Removal rate of T-P in the water in HF-HF hydroponic wastewater treatment apparatus with calcite as affected by addition method of special filter media was higher than that in HF-HF hydroponic wastewater treatment apparatus with other filter media. Removal rate of BOD, COD, SS, T-N and T-P in the water in mixed filter media with calcite were 86, 84, 87, 50 and 97%, respectively. Removals of pollutants except for T-P in the water were slightly different. Therefore, it should be considered that the removal rate of T-P was good for calcite in HF-HF hydroponic wastewater treatment apparatus. To improve T-N and T-P removal, the optimum particle size of filter media was 1.2 mm, and the optimum injection ratio ( HF bed : HF bed) of hydroponic wastewater was 60:40.

To develop environmentally friendly constructed wetlands(CWs) for treating domestic sewage which was produced in farming and fishing village, the efficiency of water treatment at different ventilation systems in the vertical bed, depths of horizontal bed, and sewage loads was investigated. In the vertical bed, BOD and COD by duplex ventilation system were lower than those by single ventilation system. But T-N and T-P concentrations by both ventilation systems in the vertical bed were little different. In the horizontal bed, BOD, COD, T-N and T-P in 1.0 m and 1.3 m depths were little different. To reduce the CWs' area and to improve the pollutant removal efficiencies, the optimum depth of horizontal bed was 1.3 m. In single and duplex ventilation CWs, the removal rate of BOD, COD, SS, T-N and T-P decreased slightly with the sewage load increases. In same sewage load conditions, the removal rates of BOD, COD, SS, T-N and T-P by duplex ventilation CWs were higher than those by single ventilation CWs. In summary, to effectively treat domestic sewage from farming and fishing village, the optimum constructed wetlands would be the duplex ventilation CWs. Key Words

A constructed wetland which was composed of aerobic and anaerobic areas was evaluated for 3 years to effectively treat the sewage produced in farming and fishing communities. For 3 years in a constructed wetland, biochemical oxygen demand(BOD), chemical oxygen demand(COD), suspended solids(SS), total nitrogen(T-N), and total phosphorus(T-P) in effluent were 0.211.8, 1.041.9, 1.16.5, 460 and 0.023.51 mg/L, respectively. Removal rate of BOD, COD and SS in effluent were 97, 92 and 99%, respectively, in the third year. As time goes by, removal rate of T-N and T-P in treated water in aerobic area and effluent were gradually increased in a constructed wetland. In the third year, removal rate in effluent were 62 and 73%, respectively. By the seasons, removal rate of BOD, COD, SS, T-N and T-P were 9798, 8791, 99, 4361 and 7686%, respectively. Removal rate of BOD, COD, SS and T-P were not affected by the seasons, but that of T-N in winter and spring were decreased than the other seasons.

This study was carried out to investigate the effect of selenium treatment on the growth of vegetables sprout. Four vegetables, such as cabbage, lettuce, pak-choi and leaf mustard were examined under various selenium treatments (0, 1, 5, 10, 25, 50, 100 mg L -1 ). Seed germinations in cabbage, pak-choi and leaf mustard were significantly inhibited at high concentration of selenium treatment. However, seed germination in lettuce was not much inhibited. Growth characteristics, such as soot length, root length, fresh weight and chlorophyll contents, were not much decreased at 1 mg L -1 of selenium and then significantly inhibited with the increase of selenium concentration at above 5 mg L -1 in all four vegetables. The selenium content increased linearly with the increase of selenium concentration. At the range of 1 to 25 mg L -1 of selenium treatment, selenium contents in vegetables were 0.11 to 1.15 of cabbage, 0.16 to 0.61 of lettuce, 0.13 to 1.31 of pak-choi and 0.14 to 1.13 mg g -1 dw of leaf mustard, respectively. These results showed that treatment of selenium with the range of 1 to 5 mg L -1 could be used to produce the selenium enriched vegetable sprouts.

Single-dose toxicity test of germanium-fortified lettuce was investigated in mice. Both sexes of C57BL/6 mice were orally administered once at a dose of 2,000 mg/kg. No death, clinical signs and pathological findings related to the treatment were observed. In addition, no significant changes in feed consumption and body weight gain were obtained during the treatment period, in spite of day-to-day fluctuation of water consumption. There were no considerable changes in hematology and serum biochemistry, except a significant decrease in GPT, GOT and LDH. Several alterations were observed in organ weight and blood biochemistry, including thymus, ovaries, heart, kidney and platelet in male or female mice. The ability of spleen cells proliferation was almost same level as shown in control group. However the population of B cells, helper T cells and cytotoxic T cells was not comparably changed in all groups. Taken together, it is suggested that single oral dose of germanium-fortified lettuce to C57BU6 mice did not cause apparent toxicological change at the dose of 2,000 mg/kg body weight.

The treatment efficiency of 2- and 3-stage constructed wetlands (CWs) was evaluated for treating domestic sewage from houses surrounding agricultural villages. The optimum depth of filter media was 90 cm. The optimum volume ratio of vertical flow (VF) and horizontal flow (HF) beds was 1:2, and the optimum filter medium was broken stone in the VF-HF 2-stage hybrid CWs. Based on the above optimum conditions, removal efficiency of biochemical oxygen demand (BOD), chemical oxygen demand (COD), suspended solids (SS), total nitrogen (T-N), and total phosphorus (T-P) were 99, 98, 99, 68, and 72%, respectively. However to utilize constructed wetlands (CWs) for treating domestic sewage for an individual house, would require downsizing of the 2-stage hybrid CWs. In addition, the low removal efficiency of T-N and T-P in 2-stage hybrid CWs would require improvements necessary to meet acceptable water quality discharge standards. Thus, to reduce the CWs’ area and improve the T-N and T-P removal efficiencies, VF-HF 2-stage hybrid CW was modified into VF/HF(I)-HF(II) and VF/HF(I)-HF(III) 3-stage hybrid CW. The optimum reduced size of 3-stage hybrid CW was the VF/HF(I)-HF(II) configuration which also increased T-N removal. Using this system, removal efficiency of BOD, COD, SS, T-N, and T-P were 99, 98, 99, 83, and 75%, respectively. In VF/HF(I)-HF(II) CW, the removal velocity of BOD, COD and SS was rapid on the order of VF (1st stage) ≫ HF(II) (3rd stage) ≥ HF(I) (2nd stage), VF (1st stage) ≫ HF(II) (3rd stage) > HF(I) (2nd stage) and VF (1st stage) ≫ HF(I) (2nd stage) > HF(II) (3rd stage), respectively. The removal velocity of T-N and T-P in VF/HF(I)-HF(II) CWs was rapid on the order of HF(I) (2nd stage) > HF(II) (3rd stage) ≥ VF (1st stage) and VF (1st stage) > HF(I) (2nd stage) > HF(II) (3rd stage), respectively.

To select of optimum rice species and germanium (Ge) application method for production of functional rice with Ge, the growth characteristics, Ge absorption and grain quality of rice plant were investigated under different rice species (Hopyungbyeo, Junambyeo, Ilmeebyeo and Dongjinbyeo) and Ge application method (soil application and foliar spray). The rice yield by soil application was higher in the order of Hopyungbyeo Junambyeo > Ilmeebyeo >> Dongjinbyeo. On the other hand, the rice yield by ≒ foliar spray was higher in the order of Junambyeo >> Ilmeebyeo > Dongjinbyeo > Hopyungbyeo. The rice yield by soil application was higher than that by foliar spray regardless of rice species. For soil application, the Ge absorption in various parts of the rice was higher in the other of rice bran > brown rice > polished rice regardless of rice species. The Ge absorption of brown rice in Hopyungbyeo, Ilmeebyeo, Dongjinbyeo and Junambyeo by soil application was 14.5, 8.0, 11.6 and 10.4 mg kg -1 , respectively. In leaf, stem and root, the Ge absorption by foliar spray was higher than that by soil application, whereas, in rice bran, brown rice and polished rice, the Ge absorption by soil application was higher than that by foliar spray. The optimum rice species and Ge application method were demonstrated to be Hopyungbyeo and soil application, respectively, which provided suitable conditions for production of functional rice with Ge.

To obtain optimum configuration, depth and load of constructed wetlands(CWs) for treatingof hydroponic waste solution(HWS) which was produced in greenhouses, the study was conducted with 4kinds of combined systems such as Vertical flow(VF)-Horizontal flow(HF), VF-VF, HF-VF and HF-HFCWs. In four configurations of CWs, the treatment efficiency of pollutants from HWS under depth of HFand VF beds, HWS loading and HWSs were investigated. Removal rate of pollutants under different depthof VF and HF in 2-stage hybrid CWs was in the order of 50 cm < 70 cm regardless of CWs configuration.Removal rate of pollutants under HWS loading in 2-stage hybrid CWs was in the order of 150 L m -2 day -1 ≒ 300 L m -2 day -1 ＞ 450 L m -2 day -1 .TheoptimumdepthandHWSloadingwere70cmand300Lm -2 day -1 in four configurations of CWs, respectively. Using this optimum condition, for various HWSs(cucumber, paprika and strawberry HWS), removal rate of pollutants in HF-HF CWs was higher than thatin HF-VF CWs. Optimum configuration of 2-stage hybrid CWs for treating hydroponic waste solution ingreenhouses was found out to be HF-HF CWs. Therefore, under the optimum conditions, removal rate ofBOD, COD, SS, T-N and T-P in HF-HF CWs were 84, 81, 84, 51 and 93%, respectively.Key Words

The growth characteristics and the Germanium (Ge) uptake of rice plant (Hopyungbyeo) insoil with Ge were investigated under different soil textures to obtain the basic information for agriculturalutilization of Ge. This study was carried out in the Wagner pot (1 5,000 -1 a). Ge concentration in soils suchas clay loam, silt loam, loam and sandy loam for rice plant cultivation was treated at 8 mg kg -1 .Thegrowth status of rice plant was almost similar in all soil texture, and rice yield was higher in the order ofsilt loam > clay loam > loam > sandy loam. In rice bran, the Ge uptakes in silt loam, clay loam, loam andsandy loam were 980, 868, 754 and 803 g pot μ -1 , respectively. The Ge uptakes of brown rice and polishrice were greater in the order of silt loam > sandy loam > clay loam > loam. In silt loam, the Ge uptakerates in leaf, stem, root, rice bran and brown rice were 19.7, 2.3, 0.03, 3.1 and 0.44%, respectively.Therefore, under the given experimental condition the optimum soil texture for production of functional ricewith Ge is a silt loam.Key Words

To effectively treat the domestic sewage that was produced on a small-scale in farming and fishing village in order to encourage an ecologically friendly environment, a small-scale sewage treatment apparatus using natural purification methods that consisted of an aerobic and an anaerobic plots were constructed. The efficiency of sewage treatment according to the sewage loading was investigated to obtain the optimum sewage loading in small-scale sewage treatment apparatus. Removal rate of pollutants according to the sewage loading were in the order of >. Therefore, the optimum sewage loading was 300 L m-2 day-1. Under the optimum sewage loading, removal rate of BOD, , turbidity, T-N and T-P were 99, 94, 99, 49 and 89%, respectively. However, to satisfy the water quality standard in effluent in small-sclae sewage treatment apparatus for domestic sewage treatment, the low removal efficiency of T-N and T-P must be improved. So to improve the removal rate of T-N and T-P, the efficiency of sewage treatment according to the improved sewage treatment process such as, re-treatment at aerobic plot, anaerobic condition of aerobic plot, changing the filter media sizes and the depths in anaerobic plot, and also addition of oyster shells to filter media at anaerobic plot were investigated. In case of 150 cm depth in anaerobic plot with filter medium A (effectivity particle size 1.50 mm) and addition of oyster shells to filter media at anaerobic plot, removal rate of T-N and T-P in both plots were increased by 10 and 3%, and 14 and 7% in comparison with 100 cm depth in anaerobic plot with filter medium B(effectivity particle size 0.95 mm), respectively. The optimum improved sewage treatment process in small-scale sewage treatment apparatus were 150 cm depth in anaerobic plot with filter medium A and addition of oyster shells to filter media at anaerobic plot.

Behavior and decomposition velocity of pollutants on various forms from domestic sewage in sewage treatment plant were investigated in order to obtain the basic data for improving the removal efficiency of pollutants and to reduce the area in constructed wetland by natural purification method. The removal amounts of BODs and CODs in aerobic bed were significantly higher than those of the other beds. In aerobic bed, the removal amounts of IBOD and ICOD were more than those for SBOD and SCOD, respectively, whereas the removal amounts of BODs and CODs in anoxic and anaerobic beds were little different. The removal amounts of SSs in aerobic bed were also higher than those for the other beds, and the removal amounts of VSS in all beds were more than those for FSS. The removal amounts of DTN and DTP in all beds were more than those for STN and STP, respectively. In addition, the decomposition velocities of TBOD, TCOD and TSS in aerobic bed were 30.79, 17.15 and 29.96 . Moreover, the decomposition velocities of BODs, CODs and SSs in aerobic bed were very rapid than those in the other beds. On the other hand, the decomposition velocities of BODs, CODs and SSs in anoxic and anaerobic beds were a little different regardless of the forms of pollutant. The decomposition velocities constants of T-N in aerobic, anoxic and anaerobic beds were 4.78, 0.12 and 0.10 , respectively. Moreover, the decomposition velocities constants of T-P in aerobic, anoxic and anaerobic beds were 13.09, 0.12 and 0.13 respectively. The decomposition velocity of T-Ns and T-Ps in aerobic bed were slightly rapid than those in the other beds, whereas the decomposition velocities of T-Ns and T-Ps in anoxic and anaerobic beds were slightly different regardless of the forms of pollutant.

In greenhouse farming, a variety of humic acids have been applied to improve soil conditions and plant growth. However, it is still unclear that how humic acids combined with chemical fertilizers affect growth and quality of fruit vegetable crops. This study was conducted to determine the combination effect of humic acids and chemical fertilizers on the growth and fruit quality of tomato (Lycopersicon esculentum MILL.) grown under greenhouse conditions. Three different formulation types of humic acid were used: liquid type A, liquid type B and solid type C. The tomato plants were grown in three treatment combination plots and in conventional fertilizer (CF) plot with recommended levels of nitrogen, phosphorus and potassium: HA combined with CF (HA+CF), HB combined with CF (HB+CF) and HC combined with CF (HC+CF). For most of growth characteristics (i.e. leaf number, internode length, maximum leaf length, leaf width and chlorophyll contents) determined in this experiment, no significant differences were observed between all combination treatments and CF. However, integrated fruit qualities (i.e. averaged weight, sugar contents and acidity) were slightly improved in the humic acid combined with CF treatments when compared with CF alone treatment. No phytotoxicity was observed with humic acid treatments. However, further studies will probably be needed to use widely and safely these humic acids, in order to ensure a maximizing growth, fruit yield and quality of tomato.

To investigate effects of inorganic and organic (Ge-132) germanium (Ge) on seed germination and on early stage growth of plane and the uptake characteristics, various concentrations (0, 10, 25, 50, 100 mg ) of Ge to popular vegetables such as leaf mustard, chinese cabbage and pak-choi, respectively, were treated. On seed germination, no significant effect was observed in both inorganic and organic Ge treatments except 100 mg treatment of inorganic Ge. Exogenous inorganic Ge ( mg treatments significantly inhibited the early root elongation growth of all plants. However, slight enhancement of early shoot elongation was detected in low concentrations (10 and 25 mg ) of Ge in the leaf mustard and chinese cabbage plants. Organic Ge treatments significantly stimulated the 개ot and shoot growth at the 10, 25 and 50 mg treatments. Ge was accumulated linearly in the vegetables as both inorganic and organic Ge concentrations were increased. Interestingly, total contents of Ge in plants with Ge-132 treatments were times more than those with inorganic Ge treatments in all concentrations. At 25 mg treatment of Ge, contents of Ge in vegetables are following: in leaf mustard, inorganic Ge: 0.37 mg and organic Ge: 1.47 mg in the chinese cabbage, inorganic Ge: 0.4 mg and organic Ge: 0.86 mg in the pak-choi, inorganic Ge: 0.33 mg and organic Ge: 0.70 mg , respectively. These results showed organic Ge is much better on early stage seedling growth and on germanium accumulation of vegetables than inorganic Ge.

The objective of this research was to evaluate adsorption of heavy metals in single- and ternary-metal forms onto chicken bone biochar (CBB). Competitive sorption of heavy metals by CBB has never been reported previously. The maximum adsorption capacities of metals by CBB were in the order of Cu (130 mg g(-1))Cd (109 mg g(-1))Zn (93 mg g(-1)) in the single-metal adsorption isotherm and Cu (108 mg g(-1))Cd (54 mg g(-1)) ≥ Zn (44 mg g(-1)) in the ternary-metal adsorption isotherm. Cu was the most retained cation, whereas Zn could be easily exchanged and substituted by Cu. Batch experimental data best fit the Langmuir model rather than the Freundlich isotherms. In the column experiments, the total adsorbed amounts of the metals were in the following order of Cu (210 mg g(-1))Cd (192 mg g(-1))Zn (178) in single-metal conditions, and Cu (156)Cd (123)Zn (92) in ternary-metal conditions. Results from both the batch and column experiments indicate that competitive adsorption among metals increases the mobility of these metals. Especially, Zn in single-metal conditions lost it adsorption capacity most significantly. Based on the 3D simulation graphs of heavy metals, adsorption patterns under single adsorption condition were different than under competitive adsorption condition. Results from both the batch and column experiments show that competitive adsorption among metals increases the mobility of these metals. The maximum metal adsorption capacity of the metals in the column experiments was higher than that in the batch experiment indicating other metal retention mechanisms rather than adsorption may be involved. Therefore, both column and batch experiments are needed for estimating retention capacities and removal efficiencies of metals in CBB.

To develop small-scale sewage treatment apparatus for detached house of agricultural village, a small-scale sewage treatment apparatus by natural purification method that consisted of packaged form of aerobic, anoxic and anaerobic bed was constructed. The efficiency of sewage treatment according to the sewage treatment method, sewage loading, and the injection method of sewage were investigated for small-scale sewage treatment apparatus of packaged form of aerobic, anoxic and anaerobic bed. The removal rate of pollutants according to the sewage treatment method for small-scale sewage treatment apparatus was high in the order of aerobic-anoxic-anoxic bed . The removal rate of pollutants according to injection method of sewage in small-scale sewage treatment apparatus was high in the order of continuous injection intermittent injection. When loaded under the optimum conditions, removal rate of BOD, COD, SS, T-N and T-P were 99, 95, 99, 83 and 96%, respectively, through this 3-stepped small-scale treatment apparatus arrayed with the order of aerobic, anoxic and anaerobic bed.

A study was conducted to investigate the behavior of pollutant forms at each area in the sewage treatment plant by natural purification method. The sewage treatment plant by natural purification method that consisted of aerobic and anaerobic area was constructed. The efficiency of sewage treatment depending on the operation time, the loading amount of pollutant season variation were investigated. The removal amount of BOD, COD, TOC and SS in the aerobic area was significantly increased as the treatment proceeded. Decreased BOD, COD, TOC, SS, T-N and T-P depending on the loading amount of pollutants in the aerobic and ananerobic area were mostly insoluble BOD (IBOD), insoluble COD (ICOD), soluble TOC (STOC), volatile SS (VSS), dissolved T-N (DTN) and dissolved T-N (DTP) types, respectively. The removal efficiency of BOD, COD, TOC, SS, T-N and T-P in hot season (summer and autumn) were more than that in cold season (spring and winter). The removal efficiencies of BOD, COD, TOC, SS, T-N and T-P of the effluent were about 92, 89, 73, 95, 46 and 84% in all seasons, respectively.

Objectives of this experiment were to select of the optimum water plant and to investigate the removal efficiency of the major nutrients in the constructed wetland by natural purification method for municipal sewage treatment in the farming and fishing village. For the experiment we used "constructed wetland" which was consisted of aerobic (vertical filter system) and anaerobic systems (horizontal filter system). Both systems were filled with gravel and filter media, and grew water plants on top of them. And then, we investigated several items such as sewage treatment efficiency, growth status of water plants and the absorbed amount of inorganic element in water plants with periodical periods. In aerobic area, removal efficiencies of BOD, COD, T-N and T-P were over 92%, 74%, 25% and 57%, respectively, and then when the water is passed through anaerobic area, the efficiency was over 96%, 84%, 44% and 71%, respectively, which was increased more treatment efficiency than that of aerobic area. Absorption amount of nitrogen and phosphorous in Miscanthus sacchariflorus BENTH were the highest in the water plants as 17.7 and 2.41 g/plant in the aerobic area, respectively. Absorption amounts of nitrogen and phosphorous in Scirpus tabernaemontani GMEL were the highest in the water plants as 8.7 and 1.13 g/plant in the anaerobic area, respectively. For the selection of optimum water plants in the constructed wetland by natural purification method for municipal sewage treatment, it were observed that there were Miscanthus sacchariflorus BENTH, Phragmites japonica STEUD and Phragmites communis TRINIUS in the aerobic area and were Zizania latifolia TURCZ, Scirpus tabernaemontani GMEL, Typha orientalis PRESL, Iris pseudoacorus L and Cares dispalata BOOTT in the anaerobic area.

To develop small-scale sewage treatment apparatus for detached house of agricultural village, a small-scale sewage treatment apparatus by natural purification method that consisted of aerobic and anaerobic bed was constructed. To reduce the area of a sewage treatment apparatus, four different fitter media were used and each filter medium was coarse sand, broken stone, steel slag, and mixed fitter media (coarse sand : broken stone : steel slag = 1:1:1). The efficiency of sewage treatment according to the depth of aerobic and anaerobic bed and the volume ratio of aerobic to anaerobic bed were investigated in small-scale sewage treatment apparatus. The removal rate of pollutants according to the depth of aerobic and anaerobic bed in small-scale sewage treatment apparatus was high in the order of 50 cm 1:3. Under the optimum conditions, removal rate of BOD, COD, SS, T-N and T-P were respectively, in small-scale sewage treatment apparatus.

This study was conducted to find out a useful bioremediation technology for heavy metal contaminated soil and water. We isolated strain CPB from heavy metal contaminated soil and evaluated the tolerance level and adsorption capacity of strain CPB to heavy metals (Strain is not determined yet). Strain CPB showed variable tolerance limit to different kinds heavy metal or concentrations of heavy metals. The growth of strain CPB was significantly inhibited by mixed heavy metals (Cd+Cu+Pb+Zn) than that of by single heavy metal. Strain CPB showed high binding capacity with Pb (Pb>Cd>Cu>Zn). In general, strain CPB showed high uptake of heavy metals such as Pb, Cd and Cu. It was observed that the capacity of heavy metal uptake from mixture of heavy metals was reduced in comparison with single heavy metal treatment. But total contents of heavy metal bound with cell in mixed heavy metal showed higher than in single heavy metal treatment. Heavy metal adsorption in cells was affected by several external factors, such as temperature and pH etc.. The optimum temperature and pH of the adsorption of heavy metal into cells were ca. and pH ca. , respectively. A large number of the electron dense particles were found mainly on the cell wall and cell membrane fractions, which was determined by transmission electron microscope. Energy dispersive X-ray spectroscopy revealed that the electron dense particles were the heavy metal complexes the substances binding with heavy metals.

The characteristics of heavy metal biosorption on the seaweeds were investigated to develop a biological treatment technology for wastewater polluted with heavy metals. The heavy metal biosorption on seaweeds ranked in the tallowing order: U. pinnatifidaE. stoloniferaLaminaria sp.>G. amansii. The Pb was biosorbed in the range of , and the Cu and Cd were biosorbed in the range of at the concentration of the heavy metal of respectively. The seaweed which was pretreated with solution improved the biosorption of the heavy metals. The temperature and pH didn't affect the biosorption of heavy metals. The Langmuir isotherm reasonably fit the data of heavy metal biosorption compared to the Freundlich isotherm. The affinity of metals on the biosorption ranked in the following order: Pb>Zn>Cu>Cd. The biosorption efficiency of the heavy metals on the U. pinnatifida decreased in the multi-component rather than the single component. The heavy metals adsorbed on the U. pinnatifida were recovered using 0.3%-NTA. U. pinnatifida among the seaweed used in this work showed the best performance for the biosorption of the heavy metals.

The adsorption and desorption of Pb, Cd, Co, Zn, Cr, Co, Ni, and Mo on the waste Undaria sp. were studied. Except for Pb. the mono adsorption rate for all heavy metals were lower than that of the heavy metals mixed. However, the adsorption capacity of the heavy metals by 1g of biosorption, in mixed heavy metals increased According to FT-IR analysis of the biosorbent after heavy metal biosorption, the replacement of the functional group by the heavy metals ions could be confirmed and the inverted peaks became larger after heavy metals adsorption. The adsorption equilibrium of heavy metals was reached in about 1 hour. The equilibrium parameters were determined based on Langmuir and Freundlich isotherms. The affinity of metals on the biosorbent decreased in the following order: Pb>Cu>Cr>Cd>Co. The desorption rate decreased in the following sequence: NTA>>HCl>EDTA. The desorption rate of heavy metals by NTA increased with increase in the concentration from 0.1 to 0.3% but the desorption rate became constant beyond 0.3%. Therefore, it represented that desorption rate of heavy metals was suitable under optimized condition (, pH 2 and 0.3% NTA solution) and was fast with 80% or more the uptake occurring within 10 min of contact time.

The phosphorus(P) adsorption capacities of various filter media were investigated in relation to the size and types of fitter media to screen the optimum condition. The objective of this study was to evaluate the constructed wetland longevity by improving P adsorption capacity. The maximum P adsorption capacities of filter media A(), B() and C() were 8, 10 and 22 mg/kg, respectively, showing those increased as the filter media size decreased. Among the experimental media, the optimum filter media size was . When the filter Medium was supplemented with organic materials which were piled up and decayed in the constructed wetland, the P adsorption capacity was significantly enhanced Under the conditions of optimum fitter media size, the respective Maximum P adsorption capacities of filter media C when supplemented with Ca, Mg, Al and Fe were higher than that of filter media C. However the addition of Ca, Mg, Al and Fe to constructed wetland were not recommended because of the possibility of their secondary pollution. The maximum P adsorption capacity of filter media C was 22 mg/kg, but this was increased to 36 mg/kg when filter media C was supplemented with 2% oyster shell.

The characteristic of the quality of stream water and the riparian vegetation during rice cultivation in the rural area of the eastern Jeonnam province was surveyed from April to November, 2000. The water quality of the streams during rice cultivation was variable. The pH of these water bodies ranged from . Electro conductivity (EC) at each water body ranged from for Beogyo-cheoa for Boseong-cheon, for Songgwang-cheon, and for Isa-cheon. Total nitrogen and other parameters (K, Ca, Mg, Na, , SS) were higher at May (Boseong-cheon) through June (Songgwang-cheon, Isa-cheon) during the transplanting season than these same parameters at August October and November. Thirty weed species of sixteen families were found in the survey areas of Songgwang-cheon, Boseong-cheon Isa-cheon and Beolgyo-cheon. Nine annual weeds, four biennial weeds, and seventeen perennial weeds were found, several different life forms were identified. Of those species three were submerged, two were free floating, five were emerged, and twenty were water-side weeds.

An investigation was carried out to evaluate the effects of pebble size on the small-scale sewage treatment apparatus by natural purification method that consisted of aerobic and anaerobic plot. pH and EC in both plots varied minimally regardless of pebble size. DO in aerobic plot increased as the pebble size decreased. That in the anaerobic plot was slightly less in comparison with that of the aerobic plot but varied minimally, regardless of pebble size. Under all experimental conditions, removals of BOD, COD and turbidity in anaerobic plot were more than 98, 91 and 98, 98% respectively. Removals of T-N and T-P increased as pebble size decreased. Under all experimental conditions, removals of T-N and T-P in anaerobic plot were about and , respectively. Judging from the above results, it should be considered that the optimum pebble size and pebble permeability in both plot was and , respectively.

This study was carried out to evaluate the pollutant removal efficiencies of the advanced drinking water treatment using activated carbon process. for raw water, Nakdong river was used. from the activated carbon adsorption experiment the fellowing results were obtained The efficiency of water treatment enhanced with increase in empty bed contact time. Variation of pH was not detected to the bed depth, but DO content gradually decreased with the bed depth. Removal efficiency of consumption, UV254 absorption, DOC and THMFP also were increased by increasing in the bed depth. Transition of adsorption zone from upper parts of the bed to the lower parts were detected as treatment periods increased. Large portion of DOCs were degraded and removed by the microbes growing on the surface of activated carbons. Cell numbers of microbes were estimated over at the depth of 20 cm from the surface 126 days after starting operation. The results shown that the activated carbon Inter was successfully acted as a biofilm filter.

A toxicity monitoring system based on the metabolic properties of sulfur-oxidizing bacteria (SOB) in continuous and fed-batch modes has been applied for the detection of nitrite (NO2 −-N). In this study, the effects of different concentrations of NO2 −-N (0.1 to 5 mg/L) on the SOB bioreactors were tested. We found that 5 mg/L NO2 −-N was very toxic to the SOB bioreactors in both continuous (R1) and fed-batch (R2) modes, showing complete inhibition of SOB activity within 2 h of operation. R1 and R2 were operated in different ways; however, the EC inhibition and recovery patterns were very similar. The EC rate increased with an increasing NO2 −-N concentration in both continuous and fed-batch modes. The addition of 5 mg/L NO2 −-N in continuous mode decreased the average EC rate by 14.38 ± 2.1 μS/cm/min; while in fed-batch mode, the EC rate decreased by 23 μS/cm/min. Although the toxicity monitoring system could detect 0.5–5 mg/L NO2 −-N, it could not detect 0.1 mg/L NO2 −-N in either continuous or fed-batch operation. Thus, the SOB biosensor method presented is useful to detect toxic agents such as NO2 −-N within a few minutes or hours.