Search

The characterization of novel therapeutic antibodies with multivalent or multispecific binding sites requires new measurement modalities for biosensors, to discriminate the engagement of antigens via one, two, or even more binding moieties. The presentation of antigens on a sensor surface in a well-controlled spatial arrangement is a prerequisite for the successful interpretation of binding kinetics measurements of multivalent analytes, but the adjustment of defined distances between immobilized ligands is difficult to achieve in state-of-the-art biosensor systems. Here, we introduce a simple DNA nanostructure resembling a slingshot, which can be configured with two identical or two different antigens (bivalent or bispecific), which are spaced at a defined distance. We characterize the slingshot structure with a chip-based biosensor using electrically switchable DNA nanolevers and demonstrate that bivalent and monovalent antibodies selectively interact with slingshots that have been functionalized with two identical or two different antigens, respectively. The dissociation kinetics are quantified in real-time measurements and we show that the slingshot structure enables a clear differentiation between affinity and avidity effects.

Electrically controllable deoxyribonuclic acid (DNA) nanolevers are used to investigate the binding interaction between Influenza A/Aichi/2/1968 and the peptide called “PeB”, which specifically binds the viral surface protein hemagglutinin. PeB is immobilized on gold electrodes of a “switchSENSE” biochip by conjugation to DNA-strands that are hybridized to complementary anchors. The surface-tethered DNA strand carries a fluorophore while the complementary strand is a multivalent arrangement carrying up to three PeB peptides. The nanolevers are kept upright (static) by applying a negative potential. Signal read-out for this static measurement mode is the change in fluorescence intensity due to changes in the local environment of the dye upon binding. Measurements of virus-peptide interaction show that the virus material specifically binds to the immobilized peptides and remains bound throughout the measurement time. Immobilized viruses are subsequently used as ligands to characterize oligovalent peptide binding to hemagglutinin, revealing rate constants of the interaction. Moreover, three Influenza A subtypes are compared in their binding behavior. Overall, this paper shows the ability to immobilize virus material on a sensor surface, which allows to target virus-proteins in their native environment. The “switchSENSE” method is therefore applicable to characterize virus-receptor interactions.

Dynamic methods of biosensing based on electrical actuation of surface-tethered nanolevers require the use of levers whose movement in ionic liquids is well controllable and stable. In particular, mechanical integrity of the nanolevers in a wide range of ionic strengths will enable to meet the chemical conditions of a large variety of applications where the specific binding of biomolecular analytes is analyzed. Herein, we study the electrically induced switching behavior of different rodlike DNA origami nanolevers and compare to the actuation of simply double-stranded DNA nanolevers. Our measurements reveal a significantly stronger response of the DNA origami to switching of electrode potential, leading to a smaller potential change necessary to actuate the origami and subsequently to a long-term stable movement. Dynamic measurements in buffer solutions with different Mg2+ contents show that the levers do not disintegrate even at very low ion concentrations and constant switching stress and thus provide s...

Solid-state nanopores are capable of the label-free analysis of single molecules. It is possible to add biochemical selectivity by anchoring a molecular receptor inside the nanopore, but it is difficult to maintain single-molecule sensitivity in these modified nanopores. Here, we show that metallized silicon nitride nanopores chemically modified with nitrilotriacetic acid receptors can be used for the stochastic sensing of proteins. The reversible binding and unbinding of the proteins to the receptors is observed in real time, and the interaction parameters are statistically analysed from single-molecule binding events. To demonstrate the versatile nature of this approach, we detect His-tagged proteins and discriminate between the subclasses of rodent IgG antibodies.

We introduce a nanofabricated silicon chip for massively multiplexed analysis of membrane channels and transporters in suspended lipid membranes that does not require any surface modification or organic solvent. Transport processes through single membrane complexes are monitored by fluorescence. The chip consists of an array of well-defined nanopores, addressing an individual pyramidal back-reflecting 30-fL compartment. The setup allows simultaneous analyses of ∼1,000 single transmembrane events in one field of view, observing translocation kinetics of transmembrane complexes.

The fabrication and characterization of a metallized nanopore structure for the sensing of single molecules is described. Pores of varying diameters (>10 nm) are patterned into free-standing silicon nitride membranes by electron-beam lithography and reactive ion etching. Structural characterization by transmission electron microscopy (TEM) and tomography reveals a conical pore shape with a 40 degrees aperture. Metal films of Ti/Au are vapor deposited and the pore shape and shrinking are studied as a function of evaporated film thickness. TEM tomography analysis confirms metalization of the inner pore walls as well as conservation of the conical pore shape. In electrical measurements of the transpore current in aqueous electrolyte solution, the pores feature very low noise. The applicability of the metallized pores for stochastic sensing is demonstrated in real-time translocation experiments of single lambda-DNA molecules. We observe exceptionally long-lasting current blockades with a fine structure of distinct current levels, suggesting an attractive interaction between the DNA and the PEGylated metallic pore walls.

Solid-state nanopores bear great potential to be used to probe single proteins; however, the passage of proteins through nanopores was found to be complex, and unexpected translocation behavior with respect to the passage direction, rate, and duration was observed. Here we study the translocation of a model protein (avidin) through silicon nitride nanopores focusing on the electrokinetic effects that facilitate protein transport across the pore. The nanopore zeta potential zeta(pore) and the protein zeta potential zeta(protein) are measured independently as a function of solution pH. Our results reveal that electroosmotic transport may enhance or dominate and reverse electrophoretic transport in nanopores. The translocation behavior is rationalized by accounting for the charging states of the protein and the pore, respectively; the resulting translocation direction can be predicted according to the difference in zeta potentials, zeta(protein) - zeta(pore). When electrophoresis and electroosmosis cancel each other out, diffusion becomes an effective (and bias-independent) mechanism which facilitates protein transport across the pore at a significant rate.

We introduce a chip-compatible scheme for the label-free detection of proteins in real-time that is based on the electrically driven conformation switching of DNA oligonucleotides on metal surfaces. The switching behavior is a sensitive indicator for the specific recognition of IgG antibodies and antibody fragments, which can be detected in quantities of less than 10(-18) mol on the sensor surface. Moreover, we show how the dynamics of the induced molecular motion can be monitored by measuring the high-frequency switching response. When proteins bind to the layer, the increase in hydrodynamic drag slows the switching dynamics, which allows us to determine the size of the captured proteins. We demonstrate the identification of different antibody fragments by means of their kinetic fingerprint. The switchDNA method represents a generic approach to simultaneously detect and size target molecules using a single analytical platform.

We report on the dynamic control over the orientation of short oligonucleotide strands which are tethered to gold surfaces in electrolyte solution. By applying alternating electrical bias potentials to the supporting electrodes we are able to induce a switching of the layer conformation between a “lying” and a “standing” state, simultaneously monitored in a contactless mode by fluorescence techniques. We demonstrate that our electrooptical experiments allow for an in-depth investigation of the intriguing molecular dynamics of DNA at surfaces and, moreover, how the dynamic response of these switchable biomolecular layers opens new prospects in label-free biosensing.

We study the coadsorption of mercaptohexanol onto preimmobilized oligonucleotide layers on gold. Monitoring the position of the DNA relative to the surface by optical means directly shows the mercaptohexanol-induced desorption of DNA and the reorientation of surface-tethered strands in situ and in real time. By simultaneously recording the electrochemical electrode potential, we are able to demonstrate that changes in the layer conformation are predominantly of electrostatic origin and can be reversed by applying external bias to the substrate.

There is great interest in establishing efficient means of organizing nanoparticles into complex structures, especially in fields like nano-optical devices. One of the demonstrated routes uses biomolecular scaffolds, like the streptavidin–biotin system, to deterministically separate and structure particle complexes. However, controlled formation of streptavidin-linked nanoparticle dimers or trimers is challenging, and large aggregates are often formed under conditions that are difficult to regulate. Here, we studied the aggregates and interlinking kinetics of biotin-functionalized 20 nm gold nanoparticles in the presence of the interlinking protein, streptavidin. We found two different protein-linker concentration regions where small stable particle aggregates are formed: when the protein and nanoparticle concentrations are similar and when the protein to nanoparticle concentration ratio exceeds intermediate concentrations (10:1–100:1) that promote precipitation of large aggregates. We attribute this behavior to the limited availability of free-linker molecules and the limited availability of free ligand (biotin) on the particle surface for low and high protein concentrations, respectively. Furthermore, we show that the product can be additionally enriched up to 25 % through either centrifugation in sucrose or size-exclusion chromatography. These results provide additional understanding into the assembly of ligand-functionalized nanoparticles with water-soluble linkers and provide a facile way to produce well-defined small aggregates for potential use in, for instance, surface-enhanced spectroscopy.

We report the photo-induced nucleation and growth of silver nanoparticles in aqueous solution in the presence of DNA oligomers. An organic dye (Cy5) was used as a photosensitizer to initiate the nanoparticle growth upon illumination with 647 nm light. The formation of nanoparticles and growth kinetics were observed by extinction spectroscopy, dynamic light scattering, and transmission electron microscopy. Irradiation of the precursor solutions with light at the Cy5 absorption maximum triggered the instantaneous formation of spherical particles with a metallic core ~15 nm in diameter. Remarkably, the particles feature significantly larger effective hydrodynamic diameters (35 nm) in solution, indicative of a DNA ad-layer on the nanoparticle surface. Centrifugation experiments confirmed that DNA was inseparably associated with the nanoparticles and indicated that DNA oligomers adsorb onto the nanoparticle surface during growth, playing the role of a capping agent. The introduced method is a fast and facile way to prepare DNA-capped silver nanoparticles in a single growth step.

Electrophoretic transport through a solid-state nanodevice comprised of two stacked nanopore sensors is used to determine the free-solution mobility of DNA molecules based on their “time-of-flight” between the two pores. Mobility measurements are possible at very low (100 pM) DNA concentration and for low as well as high salt concentrations (here 30 mM and 1 M KCl). The mechanism of DNA transport through the device is elucidated by statistical analysis, showing the free-draining nature of the translocating DNA polymers and a barrier-dominated escape through the second pore. Furthermore, consecutive threading of single molecules through the two pores can be used to gain more detailed information on the dynamics of the molecules by correlation analysis, which also provides a direct electrical proof for translocation.

We present the fabrication and characterization of nanopore microcavities for the investigation of transport processes in suspended lipid membranes. The cavities are situated below the surface of silicon-on-insulator (SOI) substrates. Single cavities and large area arrays were prepared using high resolution electron-beam lithography in combination with reactive ion etching (RIE) and wet chemical sacrificial underetching. The locally separated compartments have a circular shape and allow the enclosure of picoliter volume aqueous solutions. They are sealed at their top by a 250 nm thin Si membrane featuring pores with diameters from 2 µm down to 220 nm. The Si surface exhibits excellent smoothness and homogeneity as verified by AFM analysis. As biophysical test system we deposited lipid membranes by vesicle fusion, and demonstrated their fluid-like properties by fluorescence recovery after photobleaching. As clearly indicated by AFM measurements in aqueous buffer solution, intact lipid membranes successfully spanned the pores. The nanopore cavity arrays have potential applications in diagnostics and pharmaceutical research on transmembrane proteins.

Spatial confinement from the nano- to the microscale is ubiquitous in nature. Striving to understand the behavior of nanoscale objects in confined domains we present a nanofluidic silicon device which consists of two stacked nanopores forming the in/outlets to a pyramidal cavity of micrometer dimensions (10 fL volume). Being electrically addressable, charged objects can be actively loaded into, trapped inside, and unloaded from the "pore-cavity-pore" (PCP) device. When operated passively, confined Brownian motion and the entropy barriers of the nanopores govern the behavior of nano-objects within the PCP device. We present measurements with single fluorescent nanoparticles as well as particle-ensembles and analyze their trajectories and residence times. Experimental data are compared to random walk simulations and analytical theories on confined diffusion and the Brownian escape of nano-objects across entropy barriers. Single particle data corroborate analytical solutions of the narrow escape problem, but ensemble measurements indicate crowding effects even at low particle concentrations. The utilization of the device to trap biomolecules is demonstrated for single λ-DNA molecules.

We present a solid state nanopore device structure comprising two nanopores which are stacked above each other and connected via a pyramidal cavity of 10 fl volume. The process of fabrication of the pore-cavity-pore device (PCP) relies on the formation of one pore in a Si(3)N(4) membrane by electron beam lithography, while the other pore is chemically etched into the Si carrier by a feedback controlled process. The dimensions of the two nanopores as well as the cavity can be adjusted independently, which is confirmed by transmission electron microscopy. The PCP device is characterized with respect to its electrical properties, including noise analysis and impedance spectroscopy. An equivalent circuit model is identified and resistance, capacitance, and dielectric loss factors are obtained. Potential and electric field distributions inside the electrically biased device are simulated by finite element methods. The low noise characteristics of the PCP device (comparable to a single solid state nanopore) make it suitable for the stochastic sensing of single molecules; moreover, the pore-cavity-pore architecture allows for novel kinds of experiments including the trapping of single nano-objects and single molecule time-of-flight measurements.

We present optical investigations on the conformation of oligonucleotide layers on Au surfaces. Our studies concentrate on the effect of varying surface coverage densities on the structural properties of layers of 12- and 24mer single-stranded DNA, tethered to the Au surface at one end while being labeled with a fluorescent marker at the opposing end. The distance-dependent energy transfer from the marker dye to the metal surface, which causes quenching of the observed fluorescence, is used to provide information on the orientation of the DNA strands relative to the surface. Variations in the oligonucleotide coverage density, as determined from electrochemical quantification, over 2 orders of magnitude are achieved by employing different preparation conditions. The observed enhancement in fluorescence intensity with increasing DNA coverage can be related to a model involving mutual steric interactions of oligonucleotides on the surface, as well as fluorescence quenching theory. Finally, the applicability of the presented concepts for investigations of heterogeneous monolayers is demonstrated by means of studying the coadsorption of mercaptohexanol onto DNA-modified Au surfaces.

Artificial nanopores with hydrophobic surface patches can be reversibly filled with water by applying electric fields.