Search

The complex process of wound healing depends on the coordinated interaction between various immunological and biological systems, which can be aided by technology. This present review provides a broad overview of the medical applications of piezoelectric and triboelectric nanogenerators, focusing on their role in the development of wound healing technology. Based on the finding that the damaged epithelial layer of the wound generates an endogenous bioelectric field to regulate the wound healing process, development of technological device for providing an exogenous electric field has therefore been paid attention. Authors of this review focus on the design and application of piezoelectric and triboelectric materials to manufacture self-powered nanogenerators, and conclude with an outlook on the current challenges and future potential in meeting medical needs and commercialization., Grpahical Abstract

Embedding active fillers into polymers to construct composite materials is an effective way to enhance the output performance of triboelectric nanogenerators (TENGs).

Obtaining sustainable, high output power supply from triboelectric nanogenerators still remains a major issue which restricts their widespread use in self-powered electronic applications. In this work, an ultra-high performance, non-toxic, flexible Triboelectric nanogenerator based on Bismuth Tungstate (Bi2WO6): Polyvinylidene fluoride- trifluoroethylene (P(VDF-TrFE)) is fabricated. Hydrothermal technique is used to synthesize highly crystalline Bi2WO6 nanoparticles which were then incorporated inside the P(VDF-TrFE) matrix nanofiber mat using electrospinning over Aluminum coated PET substrate to yield a nanogenerator with device configuration of Cu coated PET/(Bi2WO6: P(PVDF-TrFE)) nanofiber mat/Al coated PET. Highly crystalline nature of biconcave shaped Bi2WO6 nanoparticles and β - P(VDF-TrFE) is confirmed by X-ray powder diffraction (XRD) and Raman spectroscopy techniques. The dielectric constant of Bi2WO6: P(PVDF-TrFE) nanofiber mat was studied and high dielectric constant of 44 was observed. The as-fabricated nanogenerator delivers a very high output voltage (open circuit) of 205 V and current density (short circuit) of 11.91 mA/m2 at ~ 0.15 kgf without any electric poling which is higher than all the prior reports in this field. Fabricated nanogenerator possesses very high output stability and ultra-sensitivity with swift response time of 545 ms. This outstanding performance of the nanogenerator can be ascribed to the synergistic combination of β-phase P(VDF-TrFE) polymer and non-centrosymmetric nature of Bi2WO6 nanoparticles. Further, a Bi2WO6 based pH sensor is driven by the energy obtained from the as-fabricated nanogenerator and the real time demonstration of nanogenerator powering a calculator is also demonstrated. The strategy outlined here presents a cost effective, high performance alternative for driving various portable bio- compatible self-powered electronic devices.

The output performance of triboelectric nanogenerators (TENGs) basically depends on the inherent nature of friction electrode materials. In this work, a series of isostructural Cu(I)-CPs (coordination polymers) with different terminal coordination groups from the same main group, formulated as [Cu(μ3-H3ttc)X]n (1: X = Cl, 2: X = Br and 3: X = I; H3ttc = trithiocyanuric acid), were chosen as the friction electrode materials to fabricate TENGs (Cl-, Br- and I-TENG based on compounds 1–3, respectively) to clearly clarify the influence of chemical microcomposition on the output performance of TENGs. The results indicated that the polarity of the compounds determined from dielectric constants was greatly affected by the halogen elements, which plays a decisive role in the output performance of the TENGs. I-TENG based on the Cu(I)-CP containing the least electronegative halogen atoms but with the largest polarity had the largest output performance, followed by Br- and Cl-TENG. As a practical application, I-TENG was used as a power source to construct a self-powered anticorrosion system to protect metal materials from corrosion.

Summary As an emerging energy-harvesting technology, enhancing the output performance of triboelectric nanogenerators (TENGs) is crucial for its practical application. Here, a dielectric enhancement effect is firstly proposed to improve the output performance of TENGs. It is found that the dielectric enhancement layer greatly elevates the triboelectrification effect, and the enhanced performance is verified by all types of TENGs. Thus, the output power of alternative current TENG (AC-TENG) and direct current TENG (DC-TENG) realizes 8.5-fold and 2.6-fold enhancement of normal devices, respectively. Besides this, the dielectric enhancement layer with leakage performance is proven to be necessary for DC-TENG to produce a continuous output. Our work provides a simple and universal strategy for elevating the performance of all types of TENGs, which is beneficial to the promotion of large-scale energy harvesting by TENGs.

Triboelectric properties of materials play an essential role in liquid energy harvesting and emerging application. The triboelectric properties of materials can be controlled by chemical functionalization strategy, which can improve the utilization of liquid energy resources or reduce the hazards of electrostatic effects. Herein, the latest research progress in molecular modification based on chemical functionalization to control triboelectric properties of materials is systematically summarized. By introducing the mechanism of contact electrification between liquid and solid materials and the developmental history of liquid–solid contact electrification, the influence of solid surface charge density, wettability and liquid properties on contact electrification of liquid and solid materials is described. Research progress on chemical functionalization for improving the hydrophobicity of solid materials, surface charge density of solid materials and triboelectric properties of liquid materials is highlighted. The focus then turns to the significance of enhanced liquid–solid contact electrification in energy harvesting, self-powered sensors and metal corrosion protection. Recent advances in chemical functionalization strategies for weakening the triboelectric properties of solid and liquid materials are also highlighted. Finally, an outlook of the potential challenges for developing chemical functionalization strategies in the field of solid surface modification and liquid molecular modification is presented.

A woven carbon fiber (WCF)-based triboelectric nanogenerator (TENG)-cum-structural supercapacitor is an excellent multifunctional device for clean energy harvesting and storage. This type of device has high load-bearing capacity and functions smoothly under severe outdoor conditions. Herein, WCF-based multifunctional TENG is reported that generated 8.9 W m−2 power with 84% energy conversion efficiency. The energy generated by the TENG was simultaneously stored in a connected supercapacitor that provide 1.93 Wh kg−1 of energy density and delivers 39.23 W kg−1 of power density. The specific surface area of the WCF was enhanced several hundred-fold by coating with an N-doped Zn–Cu selenide nanoporous material, thereby enabling higher energy generation and elevated storage capacity of the device. The TENG use a polyester-based solid polymer electrolyte as the negative electrode and polydimethylsiloxane-coated WCF as the positive electrode. The device has a very high coulombic efficiency with high mechanical strength and ability to resist massive impact. An application of the multifunctional device was demonstrated. These types of multifunctional devices have great potential in the self-charging automobile, aerospace, sensor, and electronics sectors.

Converting mechanical deformation from surrounding environment into detectable electrical signals remains one of the most attractive fields due to its potential applications in sustainable energy harvesting, self-powered sensors, and others. Presently, deformation energy is harvested by generating voltage/current through bending/twisting of piezoelectric materials, but its recyclability is limited in number. In contrast, polarization is generated in all known insulators/semiconductors due to elastic strain gradient, which offers unique electromechanical coupling and in turn, could generate significant potential differences to drive charge transfer. Here, we demonstrate that extremely high direct current with density of 28 × 106 A m−2 is generated without need of any external power supply by applying pointed force using conductive-atomic force microscope (cAFM) tip on multilayer graphene/substrate (SiO2, Si, glass). Further, the ramp-dependent time-resolved current is measured at a localized point, which indicates that pointed force-induced flexoelectric potential differences are the main driving factor to utilize mechanoelectrical coupling and in turn generate high current density. This research work provides a new strategy to utilize the flexoelectric effect to utilize electromechanical coupling to generate giant energy harvesting, which will have a potential impact on the various multiple fields including smart devices, materials, and even a fundamental understanding of physics.

For achieving more effective mechanical energy conversion, based on low-cost and flexible polydimethylsiloxane (PDMS) and polyvinylidene fluoride (PVDF) polymer film as triboelectric and piezoelectric function layer respectively, a polymer-based hybrid piezoelectric-triboelectric nanogenerator (PT-NG) with a structure of Al/PVDF/Cu-PDMS/indium tin oxide (ITO)/polyethylene terephthalate (PET) has been demonstrated. The device has realized the simultaneous triboelectric and piezoelectric conversions in one structure. In addition, when PDMS and PVDF are further modified by graphene quantum dot (GQD) and titanium dioxide (TiO2) nanoparticles respectively, both triboelectric and piezoelectric outputs of the modified device are greatly enhanced synchronously. The experimental results have indicated that the increase of triboelectric output is due to the improvement of dielectric properties of PDMS film doped with conductive GQDs as well as the enhancement of the effective contact caused by the change of PDMS surface microstructure. While the promotion of piezoelectric output is mainly attributed to the fact that PVDF film after TiO2 modification induces more polarized β phase with a polarization-free process. Accordingly, the modified device converts mechanical energy into electricity more effectively, which shows a promising prospect in the fields of flexibility display, electronic skin, wearable electronic products and self-powered sensors.

The high-voltage power source is one of the important research directions of triboelectric nanogenerator (TENG). In this paper, a high-voltage output TENG (HVO-TENG) is proposed with direct current/alternating current (DC/AC) optimal combination method for wind energy harvesting. Through the optimal design of a direct current generation unit (DCGU) and an alternating current generation unit (ACGU), the HVO-TENG can produce DC voltage of 21.5 kV and AC voltage of 200 V, simultaneously. The HVO-TENG can continuously illuminate more than 6,000 light emitting diodes (LEDs), which is enough to drive more possible applications of TENG. Besides, this paper explored application experiments on HVO-TENG. Demonstrative experiments indicate that the high-voltage DC output is used for producing ozone, while the AC output can light up ultraviolet (UV) LEDs. The HVO-TENG can increase the ozone concentration (C) in an airtight container to 3 parts per million (ppm) after 7 h and continuously light up UV LEDs. All these demonstrations verify that the HVO-TENG has important guiding significance for designing high performance TENG.

The ability to detect multidimensional forces is highly desired for electronic skin (E-skin) sensors. Here, based on single-electrode-mode triboelectric nanogenerators (S-TENGs), fully elastic E-skin that can simultaneously sense normal pressure and shear force has been proposed. With the hemispherical curve-structure design and further structural optimization, the pressure sensor exhibits a high linearity and sensitivity of 144.8 mV/kPa in the low-pressure region. By partitioning the lower tribolayer into two symmetric parts, a multidimensional force sensor has been fabricated in which the output voltage sum and ratio of the two S-TENGs can be used for normal pressure and shear force sensing, respectively. When the multidimensional force sensors are mounted at a two-fingered robotic manipulator, the change of the grabbing state can be recognized, indicating that the sensor may have great application potential in tactile sensing for robotic manipulation, human-robot interactions, environmental awareness, and object recognition.

Exploring a rapid, reliable, and practical means to detect blockages and leakages in liquid pipelines and accurately locate their positions is of great importance in practical engineering applications. Here, we report a bubble motion-based triboelectric sensor (BM-TES) for detecting and locating the blockages and leaks inside a plastic tube. This simple-designed, environment-friendly, non-damaging sensor is composed of several ring-shaped Cu electrodes distributed on a polytetrafluoroethylene tube. The self-powered movement of the bubble under the action of buoyancy makes the inner wall of the tube change from the original solid-liquid phase to the gas-solid-liquid phase, which results in a short-term contact and separation between the liquid and the wall. Based on the fractional triboelectric effect of the liquid-solid contact, an obvious real-time stable voltage peak will be generated where the detection bubble passes. The obvious peaks of the open-circuit voltage with respect to time correspond with the electrode distribution. Then, the peaks can be utilized as a robust and sensitive indicator for detecting blockage and leakage, as the number of obvious peaks of the open-circuit voltage is directly related to the blockage and leakage location. The blockage and leakage in a fluid tube were successfully detected using the BM-TES with an accuracy of 10 cm. In addition, the BE-TES was able to detect the water flow velocity in the pipe. The experimental results showed that BM-TES can provide a new strategy and method for liquid tube monitoring and has great potential application value in related fields.

The rapid development of flexible triboelectric nanogenerators (TENGs) has become an alternative to batteries for wearable devices. Stretchable, multifunctional, and low-cost are the primary development directions for these wearable devices based on TENG. Herein, a stretchable triboelectric generator with coplanar integration was designed for energy harvesting and force sensing. The industrial conductive silicone and silicone were used to fabricate the TENG with a thickness of less than 0.9 mm. When the elongation was less than 150%, TENG exhibited excellent linear characteristics in the resistance-tensile strain correspondence, and the coefficient of determination was 0.99. This stretchable TENG with a sufficient contact area of 9 cm2 could generate a short-circuit current of 2 µA when it was in contact with the skin. Lastly, an intelligent tension monitoring wearable device that can effectively measure the tensile force was developed. Such a stretchable, coplanar integration-based, and low-cost wearable device has excellent applicability in wearable electronics.

Water-solid triboelectric nanogenerators (TENGs), as new energy collection devices, have attracted increasing attention in ocean energy harvesting and self-powered sensing. Polyacrylic acid (PAA) coating, usually used on the surface of marine equipment, has the property of anti-aging and anti-wear but limits triboelectrical output when used with TENGs. In this paper, polyacrylic acid coating was modified with fluorinated polyacrylate resin (F-PAA) to increase its triboelectrical output, by 6 times, and also to increase its anti-corrosion property. In addition, the corrosion resistance property can be further enhanced by cathodic protection using the electrical output generated by the water-flow triboelectrical energy transfer process. Given their easy fabrication, water-flow energy harvesting, and corrosion resistance, PAA/F-PAA coating-based TENGs have promising applications in river and ocean energy collection and corrosion protection.

Droplet motion state monitoring is important in microfluidic applications, such as biomedicine, drug delivery, and metal ion extraction. Here, a nonintrusion monitoring method of droplet motion state via liquid-solid contact electrification is proposed, and a triboelectric droplet motion state sensor (TDMSS) is fabricated. Droplet counting and droplet size monitoring can be realized by signal processing and information extracting of the voltage pulse. The experimental results show that the number of droplets increases linearly with the increase of liquid flow, and the linearity is 0.9854. Moreover, TDMSS can stably monitor the number of droplets in different motion states. In addition, the output pulse width is sensitive to droplet size, and the droplet length ranges from 3 to 13.5 mm. More importantly, TDMSS can realize the function of droplet counting and size monitoring of a conductive liquid and accurate droplet counting under different inclination angles and motion states. This work not only provides a nonintrusion method for droplet motion state monitoring but also makes a solid step for microfluidic sensing technology based on a triboelectric nanogenerator.

Triboelectric nanogenerators (TENGs) are useful for harvesting clean and widely distributed water droplet energy with high efficiency. However, the commonly used polymer films in TENGs for water droplet energy harvesting have the disadvantages of poor breathability, poor skin affinity, and irreparable hydrophobicity, which greatly hinder their wearable uses. Here, we report an all-fabric TENG (F-TENG), which not only has good air permeability and hydrophobic self-repairing properties but also shows effective energy conversion efficiency. The hydrophobic surface composed of SiO2 nanoparticles and poly(vinylidenefluoride-co-hexafluoropropylene)/perfluorodecyltrichlorosilane (PVDF-HFP/FDTS) exhibits a static contact angle of 157° and displays excellent acid and alkali resistance. Because of its low glass transition temperature, PVDF-HFP can facilitate the movement of FDTS molecules to the surface layer under heating conditions, realizing hydrophobic self-repairing performance. Furthermore, with the optimized compositions and structure, the water droplet F-TENG shows 7-fold enhancement of output voltage compared with the conventional single-electrode mode TENG, and a total energy conversion efficiency of 2.9% is achieved. Therefore, the proposed F-TENG can be used in multifunctional wearable devices for raindrop energy harvesting.

The demand for flexible, efficient, and self-powered cochlear implants applied to remedy sensorineural hearing loss caused by dysfunctional hair cells remains urgent. Herein, we report an acoustic core-shell resonance harvester for the application of artificial cochleae based on the piezo-triboelectric effect. Integrating dispersed BaTiOsub3/subparticles as cores and porous PVDF-TrFE as shells, the acoustic harvest devices with ingenious core-shell structures exhibit outstanding piezo-triboelectric properties (iV/isubioc/i/sub= 15.24 V,iDA/isubisc/i/sub= 9.22 mA/msup2/sup). The acoustic harvest principle reveals that BaTiOsub3/subnanocores resonate with sound waves and bounce against porous PVDF-TrFE microshells, thereby generating piezo-triboelectric signals. By experimental measurement and numerical modeling, the vibration process and resonance regulation of acoustic harvest devices were intensively investigated to regulate the influential parameters. Furthermore, the acoustic harvesters exhibit admirable feasibility and sensitivity for sound recording and show potential application for artificial cochlea.

Using triboelectric nanogenerators (TENGs) to harvest blue energy in the ocean is advanced technology at present. In wave environments, the wave magnitude is constantly changing, so designing a TENG that can adjust the energy harvesting ability is necessary. Herein, a graded energy harvesting triboelectric nanogenerator (GEH-TENG) is fabricated, in which double generation units can operate in different transmission states to adapt to wave changes. Under small waves, the GEH-TENG is in the primary transmission state. Once waves are large enough, it enters the secondary transmission state, realizing graded energy harvesting to enhance power generation performance. Experiments show that when the input frequency is 1.0 Hz and the amplitude is 120 mm, the GEH-TENG can generate 0.7 mJ of energy in a single operation cycle, which is 2.3 times of it without grading. Moreover, it can be placed on the shore to monitor ocean wave conditions. An idea of graded energy harvesting is proposed in this study, and the proposal provides useful guidance for practical applications of TENGs in ocean wave condition monitoring.

The marine internet of things (MIoT), an increasingly important foundation for ocean development and protection, consists of a variety of marine distributed sensors under water. These sensors of the MIoT have always been highly dependent on batteries. To realize in situ power supply, a flexible seaweed-like triboelectric nanogenerator (S-TENG) capable of harvesting wave energy is proposed in this study. The flexible structure, designed with inspiration from the seaweed structure, processes extensive marine application scenarios. The bending and recovering of the S-TENG structure under wave excitations are converted to electricity. As the output performance increases with the number of parallel connected S-TENG units, an S-TENG system with multiple units could serve for floating buoys, coastal power stations, and even submerged devices. Through the demonstration experiments performed in this study, the flexible, low-cost S-TENG could become an effective approach to achieve a battery independent MIoT.

Recent advances have led to the development of intelligent drug-delivery systems such as microchips, micropumps, and soft devices with sensors; however, the facile preparation of transdermal and implantable systems modulable to various stimuli remains elusive. In addition, the use of a battery limits their wearable and implantable applications. Therefore, to overcome these disadvantages, we herein suggest a facile strategy to prepare electro-mechanochemically responsive soft gel composites with molecular gatekeeper-based nanocontainers. We found that a metal-phenolic coordination network can act as an efficient self-healable and adaptive gatekeeper in response to electrical and mechanical stimuli owing to the reversible dynamic bonds and adhesiveness to the silica surface. The porous channels of mesoporous silica nanoparticles are filled with guest molecules, and the exterior is wrapped with metal-tannic acid (TA) networks. Owing to the robustness of metal-phenolic network, the guest molecules are efficiently entrapped in the channels but released by electrical and ultrasound input. Voltage-dependent changes in the guest release rate provide control over the dosage on demand. The combination of hydrogel matrixes with the responsive nanocapsules enables the construction of a series of adaptive gel composites capable of successive guest release in response to electrical, ultrasound, electromechanical, and triboelectric stimuli. The Korsmeyer-Peppas model revealed that the release mechanism is non-Fickian, which indicates the presence of boundaries around the guest-loading channels (n = 0.739, R2 = 0.9574 when 2 V is applied). This study realized efficient platforms for active-type drug-delivery applications based on transdermal patches and implantable gels with remotely controllable release characteristics.

A flexible and stable power supply is essential to the rapid development of wearable electronic devices. In this work, a transparent, flexible, temperature-stable and ionogel electrode-based self-healing triboelectric nanogenerator (IS-TENG) was developed. The ionogel with excellent stretchability (1,012%), high ionic conductivity (0.3 S·m−1) and high-temperature stability (temperature range of −77 to 250 °C) was used as the electrode of the IS-TENG. The IS-TENG exhibited excellent transparency (92.1%) and stability. The output performance did not decrease when placed in a 60 °C oven for 48 h. In addition, the IS-TENG behaved like a stable output in the range of −20 to 60 °C. More importantly, the IS-TENG could also achieve self-healing of electrical performance at temperatures between −20 and 60 °C and its output can be restored to its original state after healing. When the single-electrode IS-TENG with an area of 3 cm × 3 cm was conducted under the working frequency of 1.5 Hz, the output values for open-circuit voltage, short-circuit current, short-circuit transferred charge, and maximum peak power density were 189 V, 6.2 µA, 57 nC, and 2.17 W·m−2, respectively. The IS-TENG enables to harvest biomechanical energy, and drive electronic devices. Furthermore, the application of IS-TENGs as self-driven sensors for detecting human behavior was also demonstrated, showing good application prospects in the field of wearable power technology and self-driven sensing.

Flexible triboelectric nanogenerators (TENGs) have attracted much attention because of its environmentally friendly, practical, and cost-producing advantages. In flexible TENGs, it is important to study the flexible electrodes in order to fabricate the fully flexible devices. Here, we compared electrical characteristics of the sponge porous polydimethylsiloxane (PDMS)-based flexible TENGs with two types of flexible electrodes, copper and carbon nanotube (CNT)-PDMS electrodes. The output voltage and maximum power density of sponge PDMS-based flexible TENGs with copper and CNTPDMS electrodes were compared. The voltage and power density of sponge PDMS-based flexible TENGs with CNT-PDMS electrodes were improved compare to those with copper electrodes. The output voltage and the maximum power density of sponge PDMS-based flexible TENGs with copper and CNT-PDMS electrodes increased 4 times and 7 times, respectively. It is attributed to higher electrical conductivity and stably flow electricity of CNT than those of copper.

We report an intriguing triboelectrification behavior of thermally treated P(VDF-TrFE) polymers. Cooled (C-) and annealed (A-) P(VDF-TrFE) films were prepared by the rapid cooling of the melt solution and the subsequent annealing, respectively. The C–P(VDF-TrFE) had sparse grains and small elastic modulus and surface charge density, while, the A-P(VDF-TrFE) had dense grains and large elastic modulus and surface charge density. When the polymers contacted ITO electrodes, the triboelectric outputs of C-(PVDF-TrFE) were larger than those of A-P(VDF-TrFE). When the polymers contacted each other, the triboelectric outputs of different P(VDF-TrFE) films were significantly larger than those of similar P(VDF-TrFE) films. Based on detailed X-ray photoemission spectroscopy results, we suggested that roughness-induced frictional heat and elastic modulus differences may play an important role in minute material and/or ion transfer during the triboelectrification of identical P(VDF-TrFE) polymers.

Wood is a state-of-art, renewable, and sustainable building material with excellent mechanical properties but negligible triboelectric polarizability. Strategies to improve and rationally tune the triboelectric properties of wood are needed to further its application for mechanical energy harvesting in smart buildings. We found that wood becomes more triboelectrically positive when modified by in situ-grown zeolitic imidazolate framework-8 (ZIF-8), a metal-organic framework (MOF), and more triboelectrically negative when coated with poly(dimethylsiloxane) (PDMS). A triboelectric nanogenerator (TENG) made with two radial-cut wood samples (L x R x T: 35 x 20 x 1 mm(3)), respectively functionalized with ZIF-8 and PDMS, can generate an open-circuit voltage (Voc) of 24.3 V and a short-circuit current (Isc) of 0.32 mu A upon 50 N, 80 times higher compared with that of native wood. We demonstrate the applicability of our functionalized wood TENG (FW-TENG) in smart buildings by using it to power household lamps, calculators, and electrochromic windows. ISSN:2590-2385

Along with the unceasing growth of worldwide economic and the associated issues on resources, energy and environment, clean energy generating technologies that are based on recyclable materials, if possible, may become the future trend of development. Here, we report the design of a cheap, lightweight, and recyclable single-electrode triboelectric nanogenerator (TENG) that utilizes waste paper as the triboelectric material. Under the current strategy, we successfully developed green energy machines without vastly increasing the mining of various critical minerals around the world. The as-designed TENG could not only collect and convert mechanical energy into electricity with sound efficiency, but also has the merit for continuous reuse and quick construction. The maximum output power density is as high as 171 mW·m−2 at a resistance of 130 MΩ and could be integrated into a book for monitoring reading actions, thus providing a new approach to the low-cost, green and sustainable self-powered electronic systems.

Triboelectric nanogenerator (TENG) has been proved as a promising energy harvester in recent years, but the challenges of exploring economically triboelectric materials still exist and have aroused interests of many researchers. In this paper, chitosansilk fibroin-airlaid paper composite film (CSA film) was fabricated and then the CSA film based-triboelectric nanogenerator (CSA-TENG) was constructed, which presents an opportunity for natural polymers to be applied in triboelectric materials. Due to the excellent electron donating ability of CSA film, the CSA-TENG can harvest environmental energy with a high efficiency. More importantly, the as-designed CSA film based dual-electrode triboelectric nanogenerator (CSA-D-TENG) is successfully assembled into hand clapper and trampoline to harvest mechanical energies generated by human bodies, it is also capable of monitoring human movement while harvesting biomechanical energies. This work provides a simple and environmental-friendly way to develop TENG for biomechanical energies harvesting and human motion monitoring.

Recently, stretchable and wearable health monitoring equipment has greatly improved human’s daily life, which sets higher demands for portable power source in stretchability, sustainability, and biocompatibility. In this work, we proposed a stretchable triboelectric nanogenerator (TENG) based on stretchable poly (3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/porous carbon hybrid for oxyhemoglobin saturation (SpO2) monitoring. To combine advantages of carbon material for its high conductivity and organic electrode for its high stretchability, we spin-coated a solution of PEDOT:PSS/porous carbon onto a plasma-treated pre-stretched Ecoflex film to fabricate a stretchable electrode with rough surface. Due to its roughness and high potential difference with the dielectric material, the stretchable-electrode-based TENG exhibited better performance compared to the pristine TENG based on carbon or PEDOT:PSS material. The output voltage and current reached up to 51.5 V and 13.2 µA as the carbon concentration increased. More importantly, the performance further increased under large strain (100%) which is suitable for wearable systems. Finally, the device demonstrated its application potential for powering a flexible blood oxygen monitor. This simple and cost-effective method can enhance the stretchability and stability of organic/inorganic electrode-based TENG, which paves the development of high-performance stretchable TENG.

The recent use of cryoprotectant replacement method for solving the easy drying problem of hydrogels has attracted increasing research interest. However, the conductivity decrease of organohydrogels due to the induced insulating solvent limited their electronic applications. Herein, we introduce the Hofmeister effect and electrostatic interaction to generate hydrogen and sodium bonds in the hydrogel. Combined with its double network, an effective charge channel that will not be affected by the solvent replacement, is therefore built. The developed organohydrogel-based single-electrode triboelectric nanogenerator (OHS-TENG) shows low conductivity decrease (one order) and high output (1.02-1.81 W/m2), which is much better than reported OHS-TENGs (2-3 orders, 41.2-710 mW/m2). Moreover, replacing water with glycerol in the hydrogel enables the device to exhibit excellent long-term stability (four months) and temperature tolerance (-50-100 °C). The presented strategy and mechanism can be extended to common organohydrogel systems aiming at high performance in electronic applications.

An electrospun nanofiber membrane significantly improves the electrical performances of triboelectric nanogenerators (TENGs) due to its high surface area. In recent years, composite nanofibers were applied to a TENG using various electrospinning system types to further enhance the performance of TENGs; however, the effects of the systems on the energy harvesting capability of TENGs have not been investigated thoroughly. This study aims to fabricate polyimide/poly(vinylidene fluoride-co-trifluoroethylene) composite nanofiber-based TENGs with three different nozzle systems: single nozzle, conjugated nozzle, and multinozzles, and two different collectors: plate collector and drum collector. A TENG with multinozzle-drum system-based nanofibers produced an output voltage of 364 V, a short-circuit current of 17.2 μA, a transferred charge of 29.72 nC, and a power density of 2.56 W/m2 at a load resistance of 100 MΩ, which were ∼7 times higher than those of other system-based nanofibers. Under the 10,000 cycles of loading, the TENG stably harvested electric energy. The TENG could also harvest energy from the human body motions, and it is sufficient to illuminate 117 light-emitting diodes and drive several electronic devices. The proposed TENG exhibits excellent electric performances as a wearable energy harvester.

As an emerging ambient energy harvesting technology, triboelectric nanogenerators (TENGs) have been proven as robust power sources. Here, we reported a novel functional triboelectric nanogenerator ...

The liquid-solid triboelectric nanogenerator (LS-TENG) has been demonstrated to harvest energy efficiently through the contact electrification effect between liquid and solid triboelectric materials, which can avoid the wear issue in solid-solid TENG. However, the droplet-based LS-TENG reveals the problems that it generally works with the continuous falling droplets or needs to be fully packaged, which greatly limit its practical application. Here, a droplet-based triboelectric nanogenerator (DB-TENG) with a simple open structure is designed to effectively solve these problems. The nonpackaged DB-TENG can work stably under extreme conditions with high humidity or high concentrations of salt, acid, or alkali solutions, showing the DB-TENGs can be flexibly utilized in all types of working environments with better reliability and lower maintenance costs. It is of great significance that the integrated DB-TENG network array can realize the all-weather ocean energy harvesting. Furthermore, under the simulated ocean wave, a scaled-up DB-TENG with considerable output performance can charge capacitors and drive electrical devices. Overall, the DB-TENG shows many advantages: simple open structure, all-weather working ability, timely supplement of water loss, no tight packaging, wear resistance, suitable for extreme working environments. This work provides a convenient and feasible way toward all-weather wave energy harvesting in real marine environments.

Recently, researchers have produced a triboelectric nanogenerators (TENGs) technology that can harvest mechanical energy. However, the expensive fabrication materials still hinder its widespread. T...

Temperature effects on the contact electrification (CE) is of great interest. Here, different kinds of substoichiometric oxide films, such as TiO2-x, Al2O3-x, Ta2O5-x, and Cr2O3-x, are deposited and annealed at different temperatures, and the CE between the films and a Pt-coated tip is performed by using Kelvin probe force microscopy (KPFM). An intriguing finding is that the polarity on the TiO2-x surface changes from negative to positive with the increase of the sample annealing temperature in air atmosphere. Such a result is attributed to the fact that annealing under an oxidative atmosphere repairs oxygen vacancies and helps upgrade the low valency of Ti3+ to a stable high valency of Ti4+. On the contrary, after annealing occurs in an Ar/H2 atmosphere, the polarity on the TiO2-x surface reverses from positive to negative. This is mainly due to the increase of oxygen vacancies after annealing in reducing atmosphere. Through the KPFM results of Al2O3-x, Ta2O5-x, and Cr2O3-x films, the effect of oxygen vacancies is further confirmed, that is, the decrease of oxygen vacancies eases the films at capturing positive charges. Based on this, TiO2-x-based identical material triboelectric nanogenerators (IM-TENGs) are designed and prepared for the first time to control the current direction. Moreover, a surface state model for explaining the CE mechanism between the metal and annealed dielectric is proposed. This study is conducive to the development of the IM-TENGs which regulate the current direction or voltage output accurately in the future and also provides a further understanding of the dominant mechanism of electron transfer in the CE.

Harvesting energy from ambient environment has been considered as a promising strategy for driving portable electronic devices in a sustainable way. A wind driven triboelectric-electromagnetic hybrid nanogenerator has been fabricated to convert wind energy into electricity. It is composed of an electromagnetic generator (EMG) and a triboelectric nanogenerator (TENG) with the output power of 35 and 0.32 mW, respectively when the wind speed is 5 m/s. Generally, TENG shows a low current output with a high voltage output characteristic, on the contrary the EMG shows a high current output and a low voltage output. This hybrid nanogenerator overcomes these problems and exhibits comprehensive and efficient performance on scavenging energy. Moreover, in view of the output performance and charging ability of the hybrid nanogenerator, it shows high stability, making it suitable for charging capacitors or batteries and driving portable electronics sustainably. A new structure of integrated TENG and EMG was designed to harvest wind energy, which shows potential applications in portable and small device power supply system, especially in the areas of remote mountains, deserts, islands, etc., as emergency power supply.

We report the development of low-cost triboelectric nanogenerators (TENGs) based on polypropylene (PP) fabrics formulated via an inexpensive melt-blowing process with an output voltage as high as 50 V. By disinfection methods such as exposure to steam, ethanol, and dry heat at 75 °C, the commercial medical masks and N95 filtering facepiece respirators (FFRs) can be reused to fabricate PP fiber based TENGs, which provide a novel regime for energy-harvesting devices based on reusable materials. As a power source, the output of one TENG can drive 15 serially connected light-emitting diodes (LEDs) or a commercial electric calculator. PP fabric TENGs can also work as self-powered sensors for the high-sensitivity detection of mechanical impact. We provide examples where the TENG is used to detect biomechanical motion such as that associated with the extension of an elbow, the touch of a finger, the impact of footsteps, and the bending of a knee without an external power supply. Most importantly, these PP fabrics for TENGs can be obtained from decontaminated medical masks that are generated as tremendous wastes every day, which provide a great potential as sustainable energy. These properties suggest that PP fabric based TENGs are promising for harvesting energy from biological systems and that they may facilitate the large-scale production of a new range of inexpensive self-powered multifunctional wearable sensors for applications in healthcare, security, and information networks.

As a kind of biocompatible material with long history, silk fibroin is one of the ideal platforms for on-skin and implantable electronic devices, especially for self-powered systems. In this work, to solve the intrinsic brittleness as well as poor chemical stability of pure silk fibroin film, mesoscopic doping of regenerated silk fibroin is introduced to promote the secondary structure transformation, resulting in huge improvement in mechanical flexibility (∼250% stretchable and 1000 bending cycles) and chemical stability (endure 100 °C and 3-11 pH). Based on such doped silk film (SF), a flexible, stretchable and fully bioabsorbable triboelectric nanogenerator (TENG) is developed to harvest biomechanical energy in vitro or in vivo for intelligent wireless communication, for example, such TENG can be attached on the fingers to intelligently control the electrochromic function of rearview mirrors, in which the transmittance can be easily adjusted by changing contact force or area. This robust TENG shows great potential application in intelligent vehicle, smart home and health care systems.

Self-powered technology is a novel power supply technology. In recent years, self-powered intelligent products have attracted much interests. Triboelectric nanogenerators (TENGs) can convert mechanical energy into electrical energy by contact and relative motion, thus providing the possibility of self-powering for electronic equipments. However, TENG-based self-powered technologies are limited by low power output and poor conversion efficiency. In this review, we present the development of TENG-based self-powered systems, with the emphasis on the output power of TENG and how to improve it. Based on the above applications, we propose the idea of TENG-driven self-powered remote robots, providing promising scenarios of small remote robots for land rescue or underwater detection. Due to the limited power output of the current TENGs, there are still some difficulties in driving the robot. Aiming at the problems of low power supply and poor conversion efficiency, we introduce the current attempts to improve the power generation efficiency from the perspectives of mechanical structure, electrode materials and auxiliary tools. We also outline the applications of TENGs as power supply systems in various fields such as sensing, wearable devices, and collecting Marine energy. Finally, we forecast the development prospect of TENG.

Wet-resistant flexible electronics have acquired increasing attention on applications in wet environments, such as sweaty skin, rainy weather, biological fluids, and underwater. However, it remains challenging to achieve non-swelling and underwater self-healing hydrogel sensors for the mechanical perception in aqueous solutions. Herein, a self-healing and non-swellable hydrogel is successfully fabricated, which presents an automatically healing behavior in various aquatic environments, including deionized water, seawater, sweat, alkali and acidic aqueous solutions. Moreover, the hydrogel demonstrates high stretchability and stable electromechanical sensing properties in water. Furthermore, an electronic skin is designed with the features of fast responsiveness, reliability, and high sensitivity for detecting breathing, speaking, coughing, and diverse body movements. The self-healing hydrogel sensors enable a brilliant mechanical sensibility for detecting a series of dynamic stimuli in air and underwater, even after the healing of fracture interface in water. The underwater self-healing and anti-swelling hydrogel would provide enticing potential on various stable electronic devices for aquatic environments, such as implantable electrodes, triboelectric nanogenerators, and underwater soft robotics.

Abstract Harvesting abundant mechanical energy has been considered one of the promising technologies for developing autonomous self-powered active sensors, power units, and Internet-of-Things devices. Among various energy harvesting technologies, the triboelectric harvesters based on contact electrification have recently attracted much attention because of their advantages such as high performance, light weight, and simple design. Since the first triboelectric energy-harvesting device was reported, the continuous investigations for improving the output power have been carried out. This review article covers various methods proposed for the performance enhancement of triboelectric nanogenerators (TENGs), such as a triboelectric material selection, surface modification through the introduction of micro-/nano-patterns, and surface chemical functionalization, injecting charges, and their trapping. The main purpose of this work is to highlight and summarize recent advancements towards enhancing the TENG technology performance through implementing different approaches along with their potential applications. Graphic Abstract This paper presents a comprehensive review of the TENG technology and its factors affecting the output power as material selection, surface physical and chemical modification, charge injection, and trapping techniques.

Establishing a sustainable energy supply is necessary for intelligent greenhouse environmental management. Compared with traditional energy, green and eco-friendly energy is more conducive to protecting the agricultural production environment. In this study, a fluorinated superhydrophobic greenhouse film is proposed as a negative triboelectric layer material for the construction of a triboelectric nanogenerator that harvests raindrop energy (RDE-TENG). Moreover, an upgraded configuration is adopted, where the bulk effect between the lower/upper electrode and film replaces the interfacial effect of the liquid-solid interface, thereby promoting charge transfer. The results show that the RDE-TENG can serve as a sustainable energy source for greenhouse temperature and humidity sensors that assists in realizing intelligent control of the environment and guides agricultural production processes. This device exhibits high-voltage and a stable output; thus, it has the potential to replace traditional energy sources, which helps toward realizing a self-powered intelligent greenhouse planting mode.

An intelligent monitoring lubricant is essential for the development of smart machines because unexpected and fatal failures of critical dynamic components in the machines happen every day, threatening the life and health of humans. Inspired by the triboelectric nanogenerators (TENGs) work on water, we present a feasible way to prepare a self-powered triboelectric sensor for real-time monitoring of lubricating oils via the contact electrification process of oil–solid contact (O–S TENG). Typical intruding contaminants in pure base oils can be successfully monitored. The O–S TENG has very good sensitivity, which even can respectively detect at least 1 mg mL–1 debris and 0.01 wt % water contaminants. Furthermore, the real-time monitoring of formulated engine lubricating oil in a real engine oil tank is achieved. Our results show that electron transfer is possible from an oil to solid surface during contact electrification. The electrical output characteristic depends on the screen effect from such as wear debris, deposited carbons, and age-induced organic molecules in oils. Previous work only qualitatively identified that the output ability of liquid can be improved by leaving less liquid adsorbed on the TENG surface, but the adsorption mass and adsorption speed of liquid and its consequences for the output performance were not studied. We quantitatively study the internal relationship between output ability and adsorbing behavior of lubricating oils by quartz crystal microbalance with dissipation (QCM-D) for liquid–solid contact interfaces. This study provides a real-time, online, self-powered strategy for intelligent diagnosis of lubricating oils.

Liquid-solid triboelectric nanogenerator (L-S TENG) is one of the major techniques to collect energy from tiny liquids, while the saturated charge density at the L-S interface is the key element to decide its performance. Here, we found that the saturated charge density of L-S contact electrification (CE) can be further increased under the illumination of an ultraviolet (UV) light. The fluorine-containing polymers and SiO2 are chosen as the electrification materials and with and without UV illumination on the L-S TENG. A series of experiments have been done to rule out the possible influences of anion generation, chemical change of solid surface, ionization of water, and so on. Therefore, we proposed that electrons belonging to water molecules can be excited to high energy states under UV illumination, which then transfer to solid surface and captured by the solid surface. Finally, a photoexcited electron transfer model is proposed to explain the enhancement of CE under the UV illumination. This work not only helps to further understand CE at L-S interface, but also offers an approach to further enhance the performance of L-S TENG, which can promote the TENG applications in the field of microfluidic systems, liquid energy harvesting, and droplet sensory.

Textile triboelectric nanogenerator (TENG) is a kind of smart textile technology that integrates traditional flexible and wearable textile materials with emerging and advanced TENG science, which not only embraces the capabilities of autonomous energy harvesting and active self-powered sensing, but also maintains original wearability and desired comfortability. With the help of the burden-free and self-sufficient wearable intelligent system, individuals can achieve convenient acquisition and efficient utilization of electric energy, which will help to promote the future development of human-oriented on-body electronics and artificial intelligence. Here, some fundamental knowledge and core elements, including the operational modes and corresponding service occasions, charge generation and transfer mechanisms, remaining challenges and potential solutions are comprehensively summarized and systematically discussed. Based on these analyses, a roadmap toward the scientific research and large-scale commercial application of textile TENGs in the next decade is highlighted at the end of the article. We believe that textile TENGs will become an indispensable part of daily clothing in the future, thus benefiting all humankind and human civilization.

Summary In the field of skin-attachable electronics, debonding-on-demand (DoD) adhesives triggered by mild, efficient, and accessible stimuli can facilitate repeated usage with negligible damage to the skin. Here, a simple and versatile method has been developed to fabricate biocompatible bonding/debonding bistable adhesive polymers (BAPs) with skin temperature-triggered conformal adhesion and room temperature-triggered easy detaching. Its potential application in a mechanosensitive communication system is also explored. The BAPs are designed by incorporating stearyl acrylate (SA) and tetradecyl acrylate (TA) into a chemically crosslinked elastomer, where a semicrystalline-to-amorphous transition between 26°C and 32°C results in high adhesive flowability and large energy dissipation. An optically transparent and mechanically compliant debonding-on-demand triboelectric nanogenerator (DoD-TENG) is fabricated using the BAP as the DoD substrate, a polydimethylsiloxane elastomer as the electrification layer, and an ion-conductive elastomer as the electrode. Furthermore, the DoD-TENG can serve as a human-machine interface for a self-powered drone navigation system.

For human beings of different ages and physical abilities, the inherent balance control system is ubiquitous and active to prevent falling, especially in motion states. A hybridized electromagnetic-triboelectric nanogenerator (HETNG) is prepared to harvest biomechanical energy during human balance control processes and achieve significant monitoring functions. The HETNG is composed of a symmetrical pendulum structure and a cylinder magnet rolling inside. Four coils are divided into two groups which form into two electromagnetic generators (EMGs). Besides, two spatial electrodes attached to the inner wall constitute a freestanding mode triboelectric nanogenerator (TENG). With a rectification circuit, the HETNG presents a high output power with a peak value of 0.55 W at a load of 160 Ω. Along with human balance control processes during walking, the HETNG can harvest biomechanical energy at different positions on the trunk. Moreover, the HETNG applied in artificial limb has been preliminarily simulated with the positions on thigh and foot, for monitoring the actions of squat and stand up, and lifting the leg up and down. For the elder that walks slowly with a walking aid, the HETNG equipped on the walking aid can help to record the motions of forwarding and unexpected falling, which is useful for calling for help. This work shows the potential of biomechanical energy-driven HETNG for powering portable electronics and monitoring human motions, also shows significant concerns to people lacked action capability or disabled.

Loss of tactile sensation is a common occurrence in patients with traumatic peripheral nerve injury or soft tissue loss, but as yet, solutions for restoring such sensation are limited. Implanted neuro-prosthetics are a promising direction for tactile sensory restoration, but available technologies have substantial shortcomings, including complexity of use and of production and the need for an external power supply. In this work, we propose, fabricate, and demonstrate the use of a triboelectric nanogenerator (TENG) as a relatively simple, self-powered, biocompatible, sensitive, and flexible device for restoring tactile sensation. This integrated tactile TENG (TENG-IT) device is implanted under the skin and translates tactile pressure into electrical potential, which it relays via cuff electrodes to healthy sensory nerves, thereby stimulating them, to mimic tactile sensation. We show that the device elicits electrical activity in sensory neuronsiin vitro/i, and that the extent of this activity is dependent on the level of tactile pressure applied to the device. We subsequently demonstrate the TENG-ITiin vivo/i, showing that it provides tactile sensation capabilities (as measured by a von Frey test) to rats in which sensation in the hindfoot was blocked through transection of the distal tibial nerve. These findings point to the substantial potential of self-powered TENG-based implanted devices as a means of restoring tactile sensation.

Triboelectric generators (TENGs) have been extensively studied as a new energy for low cost and the universally applicable prospect. Meanwhile, perovskites have been applied in TENG and show a good performance in view of high carrier mobility, long life and dielectric properties. The asymmetry structure of the orthogonal phase CsPbBr3 perovskite endows it with ferroelectric property and induces the misalignment of the positive and negative charge centers. Herein, the surface energy of halogen doped inorganic CsPbX3 (X = Cl-, Br-) perovskites are theoretically investigated by density functional theory (DFT) calculation, the crystal polarizability of pristine CsPbBr3 is improved from 0.47 Ry a.u. to 0.52 Ry a.u. (CsPbCl3), indicating the polarizability of CsPbCl3 is higher than CsPbBr3. In addition, the build-in electric field (Ebuild-in) of perovskite materials can be enhanced by the spontaneous polarization and the aligned dipoles in the Ebuild-in could further improve the tribo-electrostatic electric field by retaining more triboelectric surface charges. In the end, CsPbCl3 achieved a power of 3.06 W m-2 compared to the power of 1.34 W m-2 of CsPbBr3. This work focuses on the regulation of crystal planes using spontaneous polarization of perovskite toward achieving a high built-in electric field for enhancing triboelectric surface charge density.

Safety concerns require the frequently check for leaks in gas pipelines. Also, in coal mines the type gases permeating from the ground need to be monitored. Triboelectric nanogenerators (TENGs) can be applied for gas sensing without external power supply. In this paper, a two-dimensional model of a TENG was established, and a gas jet a rectangular cross section was added between two triboelectric materials. The TENG could generate distinguishable electrical signals according to the different types of gas and the different gas injection areas. This work contributes to the area of self-powered gas sensing.

Micromechanical vibration, as one of the most prevalent forms of energy in an ambient environment, has surpassing application potentials as the power source for self-powered electronics. A triboelectric nanogenerator (TENG) can effectively convert vibrational energy to electricity, which has the unique benefit of a wide-band over a traditional vibration energy harvester due to the contact electrification mechanism. Herein, the frequency band characteristics of vibrational TENG (V-TENG) were systematically elaborated. The mechanical model of V-TENG was established to explore its working mechanism for wide-band vibrational energy harvesting. By simulation analysis and experimental validation, the bandwidth dependence of V-TENG on acceleration magnitude, proof mass, stiffness, and gap distance was investigated in detail. With optimized structural parameters, an ultra-wide-band vibration energy harvester (UVEH) was developed by a tandem spring-mass structure. Within the ultra-wide-band range from 3 to 45 Hz, the UVEH can invariably illuminate 36 serial light-emitting diodes (LEDs) and charge a 33 μF capacitor to 1.5 V within 35 s. This work has quantitatively studied frequency band characteristics of V-TENG and provided a promising strategy for wide-band vibrational energy harvesting from a machine, bridge, water wave, and human motion.