Search

Herein we report a hybrid organic–inorganic nanomaterial that combines the structural stability of colloidal lignin nanoparticles with the lubricant performance of MoS2 nanoparticles.

Breaking down lignin into smaller units is the key to generate high value-added products. Nevertheless, dissolving this complex plant polyphenol in an environment-friendly way is often a challenge. Levulinic acid, which is formed during the hydrothermal processing of lignocellulosic biomass, has been shown to efficiently dissolve lignin. Herein, levulinic acid was evaluated as a medium for the reductive electrochemical depolymerization of the lignin macromolecule. Copper was chosen as the electrocatalyst due to the economic feasibility and low activity towards the hydrogen evolution reaction. After depolymerization, high-resolution mass spectrometry and nuclear magnetic resonance spectroscopy revealed lignin-derived monomers and dimers. A predominance of aryl ether and phenolic groups was observed. Depolymerized lignin was further evaluated as an anti-corrosion coating, revealing enhancements on the electrochemical stability of the metal. Via a simple depolymerization process of biomass waste in a biomass-based solvent, a straightforward approach to produce high value-added compounds or tailored biobased materials was demonstrated.

Lubrication of an internal combustion engine is critical for energy and material losses. Engine lubricants contain a number of functional additives including zinc dialkyldithiophosphate, which is a...

The simultaneous removal of organic and inorganic pollutants from wastewater is a complex challenge and requires usually several sequential processes. Here, we demonstrate the fabrication of a hybrid material that can fulfill both tasks: (i) the adsorption of metal ions due to the negative surface charge, and (ii) photocatalytic decomposition of organic compounds. The bioinorganic hybrid membrane consists of cellulose fibers to ensure mechanical stability and of Bi4O5Br2/BiOBr nanosheets. The composite is synthesized at low temperature of 115 °C directly on the cellulose membrane (CM) in order to maintain the carboxylic and hydroxyl groups on the surface that are responsible for the adsorption of metal ions. The composite can adsorb both Co(II) and Ni(II) ions and the kinetic study confirmed a good agreement of experimental data with the pseudo-second-order equation kinetic model. CM/Bi4O5Br2/BiOBr showed higher affinity to Co(II) ions than to Ni(II) ions from diluted aqueous solutions. The bioinorganic composite demonstrates a synergistic effect in the photocatalytic degradation of rhodamine B (RhB) by exceeding the removal efficiency of single components. The fabrication of the biologic-inorganic interface was confirmed by various analytical techniques including scanning electron microscopy (SEM), scanning transmission electron microscopy with energy dispersive X-ray spectroscopy (STEM EDX) mapping, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The presented approach for controlled formation of the bioinorganic interface between natural material (cellulose) and nanoscopic inorganic materials of tailored morphology (Bi–O–Br system) enables the significant enhancement of materials functionality.

Cobalt-based Li-ion batteries are produced globally on a massive scale, but most are discarded to landfill at the end of their useful lifetime. In this work, an efficient cobalt catalyst for the hydrolysis of sodium borohydride to dihydrogen was prepared from lithium ion battery waste, providing a second life for valuable minerals. This material is composed of a mixed metal cobalt–aluminium oxide supported on graphene, as elucidated by a combined FTIR, Raman, SEM, scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) and energy-dispersive X-ray spectroscopy (EDS) study. The obtained metal oxide material, which exhibits an average oxidation state for Co of 2.45, is a languid catalyst at room temperature, but rapid hydrogen production of up to 49 L(H2) min−1 g−1(Co) was observed in catalytic runs heated to 70 °C. This carbon-supported cobalt catalyst is competitive with designed cobalt nanostructured catalysts prepared from pure precursors. This work is illustrative of the opportunities which arise when e-waste is utilised as a mineral resource within the scope of a circular economy.

CuWO4 is a photoanode candidate in neutral pH, and manganese-based oxygen evolution reaction electrocatalysts are of high interest due to their low price and low toxicity. Considering the unexplored chemistry of transition-metal carbodiimides/cyanamides for the PEC water oxidation, we investigated MnNCN as an electrocatalyst for CuWO4 under AM 1.5G illumination in potassium phosphate electrolyte (pH 7). Surface functionalization of CuWO4 photoanodes with MnNCN increased the photocurrent from 22 to 30 μA cm-2 at 1.23 V vs RHE. Complementary structural analysis by means of XRD and XPS revealed that MnNCN forms a core-shell structure MnNCN@MnPO x in phosphate electrolyte and mimics a manganese phosphate electrocatalyst. As such, the surface chemistry of MnNCN significantly differs from previous studies on the cobalt analogue (CoNCN). A separately prepared MnNCN electrode developed a small but detectable photocurrent due to photogenerated holes inside the semiconducting carbodiimide core of the MnNCN@MnPO x structure.

CaH8Mn2O12, orthorhombic, Pccn (no. 56), a = 13.9791(19) A, b = 5.5404(8) A, c = 13.3908(18) A, V = 1037.1(2) A, Z = 4, Rgt(F) = 0.0318, wRref(F ) = 0.0659, T = 293 K.