Search

Background: Modern medicine requires intensive research to find new diagnostic and therapeutic solutions. Recently, upconverting nanoparticles (UCNPs) doped with lanthanide ions have attracted significant attention. Methods: The efficient internalization of UCNPs by cells was confirmed, and their precise cellular localization was determined by electron microscopy and confocal studies. Results: UCNPs colocalized only with specific organelles, such as early endosomes, late endosomes and lysosomes. Furthermore, experiments with chemical inhibitors confirmed the involvement of endocytosis in UCNPs internalization and helped select several mechanisms involved in internalization. Exposure to selected UCNPs concentrations did not show significant cytotoxicity, induction of oxidative stress or ultrastructural changes in cells. Conclusion: This study suggests that UCNPs offer new diagnostic options for biomedical infrared imaging.

Iron(iii) oxide nanoparticles doped with magnesium exposed to an alternating magnetic field induced cytotoxic effects on lung cancer cells (A549).

Pure niobium substrates were coated using laser cladding method. Pure molybdenum, Yttria Stabilized Zirkonia (YSZ) and corundum (Al2O3) powders were used as coating materials. Coatings were deposited on specimens as seperate paths with 3÷10mm width and 40mm of length. Two different laser power 3kW and 4kW were tested during deposition. In order to assess the quality of the Mo-YSZ and Mo-Al2O3 coatings, the light microscopy, Scanning Electron Microscopy (SEM), chemical analysis (EDS) and Vickers hardness test investigation were performed. The surface roughness and wear volume were also measured. As a result of YSZ-Mo powder cladding on the Nb substrate the composite layers were obtained without cracks and porosity not exceeding 1 μm. In addition, an increase in hardness of about 450 HV0.5 was revealed. As a result of Al2O3-Mo powder cladding on the Nb substrate the composite layers with many voids and cracks were obtained for each of the cladding variants.

In this paper, we present a comparative analysis of the optical properties of non-polar and polar GaN/AlGaN multi-quantum well (MQW) structures by time-resolved photoluminescence (TRPL) and pressure-dependent studies. The lack of internal electric fields across the non-polar structures results in an improved electron and hole wavefunction overlap with respect to the polar structures. Therefore, the radiative recombination presents shorter decay times, independent of the well width. On the contrary, the presence of electric fields in the polar structures reduces the emission energy and the wavefunction overlap, which leads to a strong decrease in the recombination rate when increasing the well width. Taking into account the different energy dependences of radiative recombination in non-polar and polar structures of the same geometry, and assuming that non-radiative processes are energy independent, we attempted to explain the ‘S-shape’ behavior of the PL energy observed in polar GaN/AlGaN QWs, and its absence in non-polar structures. This approach has been applied previously to InGaN/GaN structures, showing that the interplay of radiative and non-radiative recombination processes can justify the ‘S-shape’ in polar InGaN/GaN MQWs. Our results show that the differences in the energy dependences of radiative and non-radiative recombination processes cannot explain the ‘S-shape’ behavior by itself, and localization effects due to the QW width fluctuation are also important. Additionally, the influence of the electric field on the pressure behavior of the investigated structures was studied, revealing different pressure dependences of the PL energy in non-polar and polar MQWs. Non-polar MQWs generally follow the pressure dependence of the GaN bandgap. In contrast, the pressure coefficients of the PL energy in polar QWs are highly reduced with respect to those of the bulk GaN, which is due to the hydrostatic-pressure-induced increase in the piezoelectric field in quantum structures and the nonlinear behavior of the piezoelectric constant.

MnBi$_{2}$Te$_{4}/$(Bi$_{2}$Te$_{3}$)$_{n}$ materials system has recently generated strong interest as a natural platform for realization of the quantum anomalous Hall (QAH) state. The system is magnetically much better ordered than substitutionally doped materials, however, the detrimental effects of certain disorders are becoming increasingly acknowledged. Here, from compiling structural, compositional, and magnetic metrics of disorder in ferromagnetic MnBi$_{2}$Te$_{4}/$(Bi$_{2}$Te$_{3}$)$_{n}$ it is found that migration of Mn between MnBi$_{2}$T$e_{4}$ septuple layers (SLs) and otherwise non-magnetic Bi$_{2}$Te$_{3}$ quintuple layers (QLs) has systemic consequences - it induces ferromagnetic coupling of Mn-depleted SLs with Mn-doped QLs, seen in ferromagnetic resonance as an acoustic and optical resonance mode of the two coupled spin subsystems. Even for a large SL separation (n $\gtrsim$ 4 QLs) the structure cannot be considered as a stack of uncoupled two-dimensional layers. Angle-resolved photoemission spectroscopy and density functional theory studies show that Mn disorder within an SL causes delocalization of electron wavefunctions and a change of the surface bandstructure as compared to the ideal MnBi$_{2}$Te$_{4}/$(Bi$_{2}$Te$_{3}$)$_{n}$. These findings highlight the critical importance of inter- and intra-SL disorder towards achieving new QAH platforms as well as exploring novel axion physics in intrinsic topological magnets., Comment: 16 pages, 5 figures, corrected typos, corrected references to figures for section 5

A multiple-quantum-well structure consisting of 40 periods of AlN/GaN:Si was investigated using a transmission electron microscope equipped with energy-dispersive X-ray spectroscopy. The thicknesses of the AlN barriers and the GaN quantum wells were 4 nm and 6 nm, respectively. The QW layers were doped with Si to a concentration of 1.3 × 10 19 c m - 3 (0.012 % at). The procedure for quantifying such a doping level using AlN as a standard is presented. The EDS results (0.013 % at) are compared with secondary ion mass spectrometry measurements (0.05 % at).

Coupling of quantum emitters in a semiconductor relies, generally, on short-range dipole-dipole or electronic exchange type interactions. Consistently, energy transfer between exciton states, that is, electron-hole pairs bound by Coulomb interaction, is limited to distances of the order of 10~nm. Here, we demonstrate polariton-mediated coupling and energy transfer between excitonic states over a distance exceeding 2~$\mu$m. We accomplish this by coupling quantum well-confined excitons through the delocalized mode of two coupled optical microcavities. Use of magnetically doped quantum wells enables us to tune the confined exciton energy by the magnetic field and in this way to control the spatial direction of the transfer. Such controlled, long-distance interaction between coherently coupled quantum emitters opens possibilities of a scalable implementation of quantum networks and quantum simulators based on solid-state, multi-cavity systems., Comment: 4 figures

Perovskites, garnets, monoclinic forms, and lately also oxyhydroxides doped with rare-earth ions have been drawn large attention due to their beneficial optical and photovoltaic properties. In this work, we have shown that several forms of crystals from Y–Al–O family can be synthesized using microwave driven hydrothermal technique using different pH and post-growth annealing at different temperatures. The structural and optical properties of these crystals were investigated as a function of hydrothermal crystallization conditions. For this purpose, x-ray diffraction, scanning electron microscopy, energy-dispersive x-ray spectroscopy, transmission electron microscopy, photoluminescence, and photoluminescence excitation studies were performed. All the structures have been doped with Eu3+ ions which are known as a local symmetry sensor because various symmetries generate different crystal fields and thus affect their luminescence spectra. The optical properties of the obtained nanoparticles in correlation with their structure and chemical composition are discussed.

In this work we adapt rare-earth-ion-doped NaYF4 nanoparticles coated with a silicon oxide shell (NaYF4:20%Yb,0.2%Tm@SiO2) for biological and medical applications (for example, imaging of cancer cells and therapy at the nano level). The wide upconversion emission range under 980 nm excitation allows one to use the nanoparticles for cancer cell (4T1) photodynamic therapy (PDT) without a photosensitizer. The reactive oxygen species (ROS) are generated by Tm/Yb ion upconversion emission (blue and UV light). The in vitro PDT was tested on 4T1 cells incubated with NaYF4:20%Yb,0.2%Tm@SiO2 nanoparticles and irradiated with NIR light. After 24 h, cell viability decreased to below 10%, demonstrating very good treatment efficiency. High modification susceptibility of the SiO2 shell allows for attachment of biological molecules (specific antibodies). In this work we attached the anti-human IgG antibody to silane-PEG-NHS-modified NaYF4:20%Yb,0.2%Tm@SiO2 nanoparticles and a specifically marked membrane model by bio-conjugation. Thus, it was possible to perform a selective search (a high-quality optical method with a very low-level organic background) and eventually damage the targeted cancer cells. The study focuses on therapeutic properties of NaYF4:20%Yb,0.2%Tm@SiO2 nanoparticles and demonstrates, upon biological functionalization, their potential for targeted therapy.

Water-soluble upconversion nanoparticles (UCNPs), based on polyvinylpyrrolidone (PVP)-coated NaYF4:Er3+,Yb3+,Gd3+, with various concentrations of Gd3+ ions and relatively high upconversion efficiencies, were synthesized. The internalization and cytotoxicity of the thus obtained UCNPs were evaluated in three cell lines (HeLa, HEK293 and astrocytes). No cytotoxicity was observed even at concentrations of UCNPs up to 50 μg ml-1. The fate of the UCNPs within the cells was studied by examining their upconversion emission spectra with confocal microscopy and confirming these observations with transmission electron microscopy. It was found that the cellular uptake of the UCNPs occurred primarily by clathrin-mediated endocytosis, whereas they were secreted from the cells via lysosomal exocytosis. The results of this study, focused on the mechanisms of the cellular uptake, localization and secretion of UCNPs, demonstrate, for the first time, the co-localization of UCNPs within discrete cell organelles.

Gd2O3:1% Er3+, 18% Yb3+, x% Mg2+ (x = 0; 2.5; 4; 5; 6; 8;10; 20; 25; 50) and Gd2O3:1% Er3+, 18% Yb3+, 2,5% Mg2+, y% Li+ (y = 0.5–2.5) nanoparticles were synthesized by homogenous precipitation method and calcined at 900 °C for 3 h in air atmosphere. Powder x-ray diffraction, scanning electron microscopy, cathodoluminescence, transmission electron microscopy, energy dispersive x-ray spectroscopy and photoluminescence techniques were employed to characterize the obtained nanoparticles. We observed a 8-fold increase in red luminescence for samples suspended in DMSO solution for 2.5% of Mg2+ doping. The x-ray analysis shows that for the concentration of 2.5% Mg, the size of the crystallites in the NPs is the largest, which is mainly responsible for the increase in the intensity of the upconversion luminescence. But the addition of Li+ ions did not improve the luminescence of the upconversion due to decreasing of crystallites size of the NPs. Synthesized nanomaterials with very effective upconverting luminescence, can act as luminescent markers in in vivo imaging. The cytotoxicity of the nanoparticles was evaluated on the 4T1 cell line for the first time.

In photodynamic therapy (PDT), photosensitizer (PS) molecules are irradiated by light to generate reactive oxygen species (ROS), the presence of which subsequently leads to cell death. At present, the modality is limited to the treatment of skin diseases because of the low tissue penetration of visible or ultraviolet light required for producing ROS. To increase tissue penetration and extend the therapeutic possibilities of PDT to the treatment of deep-seated cancer, rare-earth doped nanoparticles capable of up-converting infrared to visible light are investigated. These up-converting nanoparticles (UCNPs) are conjugated with PS molecules to efficiently generate ROS. In this work, we employ hexagonal β-NaYF4:Yb3 + ,Er3 + as UCNPs and Rose Bengal (RB) as PS molecules and demonstrate efficient in vitro PDT using this nanoformulation. Covalent bonding of the RB molecules is accomplished without their functionalization-an approach which is expected to increase the efficiency of ROS generation by 30%. Spectroscopic studies reveal that our approach results in UCNP surface fully covered with RB molecules. The energy transfer from UCNPs to RB is predominantly non-radiative as evidenced by luminescence lifetime measurements. As a result, ROS are generated as efficiently as under visible light illumination. The in vitro PDT is tested on murine breast 4T1 cancer cells incubated with 250 µg ml-1 of the nanoparticles and irradiated with NIR light under power density of 2 W cm-2 for 10 minutes. After 24 hours, the cell viability decreased to 33% demonstrating a very good treatment efficiency. These results are expected to simplify the protocols for preparation of the PDT agents and lead to improved therapeutic effects.

The paramagnetic Y3−0.02−x Er0.02Yb x Al5O12 (x = 0.02, 0.06, 0.10, 0.12, 0.18, 0.20) nanocrystals (NCs) were synthesized by the microwave-induced solution combustion method. The XRD, TEM and SEM techniques were applied to determine the NCs’ structures and sizes. The XRD patterns confirmed that the NCs have for the most part a regular structure of the Y3Al5O12 (YAG) phase. The changes of the distance between donor Yb3+ (sensitizer) and acceptor Er3+ (activator) were realized by changing the donor’s concentration with a constant amount of acceptor. Under 980 nm excitation, at room temperature, the NCs exhibited strong red emission near 660 and 675 nm, and green upconversion emission at 550 nm, corresponding to the intra 4f transitions of Er3+ (4F9/2, 2H11/2, 4S3/2) → Er3+ (4I15/2). The strongest emission was observed in a sample containing 18% Yb3+ ions. The red and green emission intensities are respectively about 5 and 12 times higher as compared to NCs doped with 2% of Yb3+. In order to prove that the main factor responsible for the increase of the upconversion luminescence efficiency is reduction of the distance between Yb3+ and Er3+, we examined, for the first time the influence of hydrostatic pressure on luminescence and luminescence decay time of the radiative transitions inside donor ion. The decrease of both luminescence intensity and luminescence decay times, with increasing hydrostatic pressure was observed. After applying hydrostatic pressure to samples with e.g. 2% and 6% Yb3+, the distance between the donor and acceptor decreases. However, for higher concentrations of the donor, this distance is smaller, and this leads to the effective energy transfer to Er3+ ions. With increasing pressure, the maximum intensity of near infrared emission is observed at 1029, 1038 and 1047 nm, what corresponds to 2F5/2 → 2F7/2 transition of Yb3+.

Despite the significant technological progress achieved in the past decades in the medical field, device-related infections carry a heavy social and economic burden. Surface modification of medical equipment is one of the most interesting approaches employed to improve the antibacterial activity of a material. Herein, we developed a process for the gold nanoparticle modification of a poly(vinyl chloride) laryngeal tube, which typically serves as an airway management device. In our study, we focused specifically on increasing the antimicrobial properties of the material while maintaining its biocompatibility. We applied two different modification methods to the poly(vinyl chloride) laryngeal tube. An increase in the antimicrobial activity of the surface was observed for both methods. In addition, the adsorption of bacterial cells on the material surface was assessed. We determined that the number of colonies cultured in the presence of the gold nanoparticle-modified samples or absorbed to the material surface decreased significantly compared with the control group. The trend was observed for both Gram-positive and Gram-negative strains. Moreover, it was established that the designed material did not exhibit a lethal impact on a control cell line. Finally, we noted discrepancies in the growth of bacteria cultured in the presence of modified or unmodified PVC material as well as differences in cell adherence to its surface. The proposed poly(vinyl chloride) modifications are most effective against Gram-positive bacteria, especially L. monocytogenes. Nevertheless, it ought to be emphasized that due to their different properties, each strain requires an individual approach.

Opaque substrates precluded, so far, transmission studies of II-VI semiconductor microcavities. This work presents the design and molecular beam epitaxy growth of semimagnetic (Cd,Zn,Mn)Te quantum wells embedded into a (Cd,Zn,Mg)Te-based microcavity, which can be easily separated from the GaAs substrate. Our lift-off process relies on the use of a MgTe sacrificial layer which stratifies in contact with water. This allowed us to achieve a II-VI microcavity prepared for transmission measurements. We evidence the strong light-matter coupling regime using photoluminescence, reflectivity, and transmission measurements at the same spot on the sample. By comparing a series of reflectance spectra before and after lift-off, we prove that the microcavity quality remains high. Thanks to Mn content in quantum wells we show the giant Zeeman splitting of semimagnetic exciton-polaritons in our transmitting structure.

Electronic and structural properties of $\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}$ and its extension to copper doped $\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}:\mathrm{Cu}$ were studied using combined ab initio simulations and transmission electron microscopy based techniques, including electron energy loss spectroscopy, energy filtered transmission electron microscopy, and energy dispersive x-ray spectroscopy. The stability of the mixed phases was investigated for substitutional and intercalation changes of basic $\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}$ structure. Four systems were compared: $\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}$, structures obtaining by Cu intercalation of the van der Waals gap, by substitution of Bi by Cu in quintuple layers, and $\mathrm{C}{\mathrm{u}}_{2}\mathrm{Se}$. The structures were identified and their electronic properties were obtained. Transmission electron microscopy measurements of $\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}$ and the $\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}:\mathrm{Cu}$ system identified the first structure as uniform and the second as composite, consisting of a nonuniform lower-Cu-content matrix and randomly distributed high-Cu-concentration precipitates. Critical comparison of the ab initio and experimental data identified the matrix as having a $\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}$ dominant part with randomly distributed Cu-intercalated regions having 1Cu-$\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}$ structure. The precipitates were determined to have 3Cu-$\mathrm{B}{\mathrm{i}}_{2}\mathrm{S}{\mathrm{e}}_{3}$ structure.

Properties of palladium nanograins obtained by sedimentation of a soluted C-Pd film prepared by PVD method are presented. These properties were studied using SEM and TEM methods. Dissolved films were prepared by PVD method and after dissolving, they were fractionated to obtain different parts classified with palladium nanograins diameters. Several classes of diameters were determined: below 20 nm, between 20 and 100 nm and above 100 nm. The defects and triple junction were observed. Multishell carbonaceous structures were found in the big and medium size Pd nanograins.

This work presents epitaxial growth and optical spectroscopy of CdTe quantum dots (QDs) in (Cd,Zn,Mg)Te barriers placed on the top of (Cd,Zn,Mg)Te distributed Bragg reflector. The formed photonic mode in our half-cavity structure permits to enhance the local excitation intensity and extraction efficiency of the QD photoluminescence, while suppressing the reflectance within the spectral range covering the QD transitions. This allows to perform coherent, nonlinear, resonant spectroscopy of individual QDs. The coherence dynamics of a charged exciton is measured via four-wave mixing, with the estimated dephasing time $T_2=(210\,\pm\,40)$ ps. The same structure contains QDs doped with single Mn$^{2+}$ ions, as detected in photoluminescence spectra. Our work therefore paves the way toward investigating and controlling an exciton coherence coupled, via $s$,$p$-$d$ exchange interaction, with an individual spin of a magnetic dopant., 6 pages, 5 figures

Zinc oxide nanoparticles (ZnO NPs) were obtained by the microwave solvothermal synthesis (MSS) method. The precursor of the MSS reaction was a solution of hydrated zinc acetate in ethylene glycol with water addition. It was proved that by controlling the water concentration in the precursor it was possible to control the size of ZnO NPs in a programmed manner. The less the water content in the precursor, the smaller the size of ZnO NPs obtained. The obtained NPs with the average particle size ranging from 25 nm to 50 nm were characterised by homogeneous morphology and a narrow distribution of particle sizes. The following parameters of the obtained ZnO NPs were determined: pycnometric density, specific surface area, phase purity, chemical composition, lattice parameters, average particle size, and particle size distribution. The average size of ZnO NPs was determined using Scherrer’s formula, Nanopowder XRD Processor Demo web application, by converting the results of the specific surface area, and TEM tests using the dark field technique. ZnO morphology and structure were determined using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The test performed by the X-ray powder diffraction (XRD) confirmed that crystalline ZnO, pure in terms of phase, had been obtained.

In this paper we presented results of investigation of carbonaceous-palladium materials obtained in the CVD (Chemical Vapor Deposition) process. This investigations were carried out with transmission electron microscopy (TEM) and scanning electron microscopy (SEM), equipped with spectrum imaging for cathodoluminescence (CL). The composites will be applied as a active layers in hydrogen and also hydrocarbons detectors. Our measurements showed that some of Pd nanoparticles have a graphite shell and also are optically active. This particle in CL spectrum reveal the peak wavelength around 525 nm (2,36 eV).

This article presents the method of size control of cobalt-doped zinc oxide nanoparticles (Zn1−xCoxO NPs) obtained by means of the microwave solvothermal synthesis. Zinc acetate dihydrate and cobalt(II) acetate tetrahydrate dissolved in ethylene glycol were used as the precursor. It has been proved by the example of Zn0.9Co0.1O NPs (x = 10 mol %) that by controlling the water quantity in the precursor it is possible to precisely control the size of the obtained Zn1−xCoxO NPs. The following properties of the obtained Zn0.9Co0.1O NPs were tested: skeleton density (helium pycnometry), specific surface area (BET), dopant content (ICP-OES), morphology (SEM), phase purity (XRD), lattice parameter (Rietveld method), average crystallite size (FW1/5/4/5M method and Scherrer’s formula), crystallite size distribution (FW1/5/4/5M method), and average particle size (from TEM and SSA). An increase in the water content in the precursor between 1.5% and 5% resulted in the increase in Zn0.9Co0.1O NPs size between 28 nm and 53 nm. The X-ray diffraction revealed the presence of only one hexagonal phase of ZnO in all samples. Scanning electron microscope images indicated an impact of the increase in water content in the precursor on the change of size and shape of the obtained Zn0.9Co0.1O NPs. The developed method of NPs size control in the microwave solvothermal synthesis was used for the first time for controlling the size of Zn1−xCoxO NPs.

Palladium nanograins placed in carbonaceous matrix shows many interesting properties connected to ability of hydrogen adsorption/absorption. Carbonaceous-palladium (C-Pd) films based on these materials change their structure and form, electrical conductivity, capacitance as well as optical absorption, transmission and reflection properties. These effects are connected to an incorporation of hydrogen atoms into palladium lattice [1], what change not only lattice constant [2] but also electric [3] and optical [4] properties of resulting material.

An effective, simple and practically useful method to incorporate fluorescent nanoparticles inside live biological cells was developed. The internalization time and concentration dependence of a frequently used liposomal transfection factor (Lipofectamine 2000) was studied. A user friendly, one-step technique to obtain water and organic solvent soluble Er(3+) and Yb(3+) doped NaYF4 nanoparticles coated with polyvinylpyrrolidone was obtained. Structural analysis of the nanoparticles confirmed the formation of nanocrystals of the desired sizes and spectral properties. The internalization of NaYF4 nanoparticles in HeLa cervical cancer cells was determined at different nanoparticle concentrations and for incubation periods from 3 to 24 h. The images revealed a redistribution of nanoparticles inside the cell, which increases with incubation time and concentration levels, and depends on the presence of the transfection factor. The study identifies, for the first time, factors responsible for an effective endocytosis of the up-converting nanoparticles to HeLa cells. Thus, the method could be applied to investigate a wide range of future 'smart' theranostic agents. Nanoparticles incorporated into the liposomes appear to be very promising fluorescent probes for imaging real-time cellular dynamics.

A facile sol-gel synthesis of novel ZnO/MgO/Fe2O3 nanoparticles (NPs) is reported and their performance is compared to that of ZnO/MgO. Powder x-ray diffraction (XRD) patterns reveal the crystal structure of the prepared samples. The average particle size of the sample was found to be 4.8 nm. The optical properties were determined by UV-vis absorption and fluorescence measurements. The NPs are stable in biologically relevant solutions (phosphate buffered saline (PBS), 20 mM, pH = 7.0) contrary to ZnO/MgO NPs which degrade in the presence of inorganic phosphate. Superparamagnetic properties were determined with a superconducting quantum interference device (SQUID). Biocompatible and stable in PBS ZnO/MgO/Fe2O3 core/shell composite nanocrystals show luminescent and magnetic properties confined to a single NP at room temperature (19-24 ° C), which may render the material to be potentially useful for biomedical applications.

A microwave, solvothermal synthesis of hydroxyapatite (HAp) nanopowder with a programmed material resorption rate was developed. The aqueous reaction solution was heated by a microwave radiation field with high energy density. The measurements included powder X-ray diffraction (PXRD) and the density, specific surface area (SSA), and chemical composition as specified by the inductively coupled plasma optical emission spectrometry technique (ICP-OES). The morphology and structure were investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). A degradation test in accordance with norm ISO 10993-4 was conducted. The developed method enables control of the average grain size and chemical composition of the obtained HAp nanoparticles by regulating the microwave radiation time. As a consequence, it allows programming of the material degradation rate and makes possible an adjustment of the material activity in a human body to meet individual resorption rate needs. The authors synthesized a pure, fully crystalline hexagonal hydroxyapatite nanopowder with a specific surface area from 60 to almost 240 m2/g, a Ca/P molar ratio in the range of 1.57–1.67, and an average grain size from 6 nm to over 30 nm. A 28-day degradation test indicated that the material solubility ranged from 4 to 20 mg/dm3.