Search

The rewiring of photosynthetic biomachineries to electrodes is a forward-looking semi-artificial route for sustainable bio-electricity and fuel generation. Currently, it is unclear how the electrode and biomaterial interface can be designed to meet the complex requirements for high biophotoelectrochemical performance. Here we developed an aerosol jet printing method for generating hierarchical electrode structures using indium tin oxide nanoparticles. We printed libraries of micropillar array electrodes varying in height and submicrometre surface features, and studied the energy/electron transfer processes across the bio-electrode interfaces. When wired to the cyanobacterium Synechocystis sp. PCC 6803, micropillar array electrodes with microbranches exhibited favourable biocatalyst loading, light utilization and electron flux output, ultimately almost doubling the photocurrent of state-of-the-art porous structures of the same height. When the micropillars' heights were increased to 600 µm, milestone mediated photocurrent densities of 245 µA cm-2 (the closest thus far to theoretical predictions) and external quantum efficiencies of up to 29% could be reached. This study demonstrates how bio-energy from photosynthesis could be more efficiently harnessed in the future and provide new tools for three-dimensional electrode design.

Summary Force sensors that are thin, low-cost, flexible, and compatible with commercial microelectronic chips are of great interest for use in biomedical sensing, precision surgery, and robotics. By leveraging a combination of microfluidics and capacitive sensing, we develop a thin, flexible force sensor that is conformable and robust. The sensor consists of a partially filled microfluidic channel made from a deformable material, with the channel overlaying a series of interdigitated electrodes coated with a thin, insulating polymer layer. When a force is applied to the microfluidic channel reservoir, the fluid is displaced along the channel over the electrodes, thus inducing a capacitance change proportional to the applied force. The microfluidic molds themselves are made of low-cost sacrificial materials deposited via aerosol-jet printing, which is also used to print the electrode layer. We envisage a large range of industrial and biomedical applications for this force sensor., Graphical abstract, Highlights Highly flexible, capacitive force sensors based on microfluidics Linear capacitance response to applied force Rapid prototyping of low-cost and robust force sensors via aerosol-jet printing Tunable design for various sensitivities and force measurement ranges, Jing et al. report a thin, conformable force sensor based on a combination of microfluidics and capacitive sensing. The low-cost sensor is fabricated via aerosol-jet printing and shows a highly linear response with adjustable design parameters for tunable sensitivities and force ranges.

Electrical polarization phenomena in GaN are important as they have significant impact on the operation of modern day energy efficient lighting and are fundamental to GaN-based high power and high frequency electronics. Controlling polarization is beneficial for the optimization of these applications. GaN is also piezoelectric, and therefore mechanical stress and strain are possible handles to control its polarization. Nonetheless, polar semiconductors in general, and GaN in particular, are weak piezoelectric materials when compared to ceramics, and are therefore not considered for characteristic electromechanical applications such as sensing, actuation and mechanical energy harvesting. Here, we examine the effect of nanoscale porosity on the piezoelectricity of initially conductive GaN. We find that for 40% porosity, the previously conductive GaN layer becomes depleted, and exhibits enhanced piezoelectricity as measured using piezoresponse force microscopy, as well as by using a mechanical energy harvesting setup. The effective piezoelectric charge coefficient of the porous GaN, d33,eff, is found to be about 8 pm/V which is 2-3 times larger than bulk GaN. A macroscale device comprising a porous GaN layer delivered 100 nW/cm2 across a resistive load under a 150 kPa mechanical excitation. We performed finite element simulations to analyze the evolution of the piezoelectric properties with porosity. The simulations suggest that increased mechanical compliance due to porosity gives rise to the observed enhanced piezoelectricity in GaN. Furthermore, the simulations show that for stress-based excitations, the porous GaN electromechanical figure of merit is increased by an order of magnitude and becomes comparable to that of barium titanate piezoceramics. In addition, considering the central role played by GaN in modern electronics and optoelectronics, our study validates a very promising research direction when considering stress-based electromechanical applications which combine GaN's semiconducting and piezoelectric properties.

Stretchable electronics represent an emerging class of devices that can be compressed, twisted and conform to very complicated shapes. The mechanical and electrical compliances of the technology promise to open up applications for healthcare, energy and entertainment purposes. However, advancement in the field has been hindered by material related constraints. Moreover, the current microfabrication facilities are optimized for rigid substrates such as silicon, which have significant different properties compared to elastomers. In this paper, four categories of enabling technologies for stretchable electronics commercialization are critically reviewed, namely: the novel design of stretchable structures, use of non-conventional materials, state-of-art printing techniques and also the patterning of electrodes or metal interconnects via conventional manufacturing techniques.

We investigate the electromechanical interactions in individual polyvinylidene fluoride-trifluoroethylene nanowires in response to localized electrical poling via a conducting atomic force microscope tip. Spatially resolved measurements of piezoelectric coefficients and elastic moduli before and after poling reveal a striking dependence on the polarity of the poling field, notably absent in thin films of the same composition. These observations are attributed to the unclamped nature of the nanowires and the inherent asymmetry in their chemical and electrical interactions with the tip and underlying substrate. Our findings provide insights into the mechanism of poling/switching in polymer nanowires critical to ferroelectric device performance., S.K.-N. and Y.C. are grateful for financial support from the European Research Council through an ERC Starting Grant (Grant No. ERC-2014-STG-639526, NANOGEN). R.A.W. thanks the EPSRC Cambridge NanoDTC, EP/G037221/1, for studentship funding. Q.J. is grateful for financial support through a Marie Sklodowska Curie Fellowship, H2020-MSCA-IF-2015-702868.

Highlights • Aerosol-jet printing is used to fabricate microfluidic devices with customised geometries, including steps and slopes. • A rapid prototyping method for producing bespoke molds for microfluidic devices with precise channel functionalization. • The functionalization capability is demonstrated by rendering a section of a microfluidic channel hydrophilic using PVA., Microfluidics has emerged as a powerful analytical tool for biology and biomedical research, with uses ranging from single-cell phenotyping to drug discovery and medical diagnostics, and only small sample volumes required for testing. The ability to rapidly prototype new designs is hugely beneficial in a research environment, but the high cost, slow turnaround, and wasteful nature of commonly used fabrication techniques, particularly for complex multi-layer geometries, severely impede the development process. In addition, microfluidic channels in most devices currently play a passive role and are typically used to direct flows. The ability to “functionalize” the channels with different materials in precise spatial locations would be a major advantage for a range of applications. This would involve incorporating functional materials directly within the channels that can partake in, guide or facilitate reactions in precisely controlled microenvironments. Here we demonstrate the use of Aerosol Jet Printing (AJP) to rapidly produce bespoke molds for microfluidic devices with a range of different geometries and precise “in-channel” functionalization. We show that such an advanced microscale additive manufacturing method can be used to rapidly design cost-efficient and customized microfluidic devices, with the ability to add functional coatings at specific locations within the microfluidic channels. We demonstrate the functionalization capabilities of our technique by specifically coating a section of a microfluidic channel with polyvinyl alcohol to render it hydrophilic. This versatile microfluidic device prototyping technique will be a powerful aid for biological and bio-medical research in both academic and industrial contexts.