Search

A primary mode of failure of thin-film coatings is the mismatch in thermal expansion coefficients of the substrate and the coating, which results in accumulation of interfacial stresses and ultimately in film delamination. While much attention has been devoted to modulation of interfacial bonding to mitigate delamination, current strategies are constrained in their generalizability and have had limited success in imbuing resistance to prolonged thermal cycling. We demonstrate here the incorporation of rigid thermal expansion compensators within polymeric films as a generalizable strategy for minimizing thermal mismatch with the substrate. Nanostructures of the isotropic negative thermal expansion (NTE) material HfV2O7 have been prepared based on the reaction of nanoparticulate precursors. The NTE behavior, derived from transverse oxygen displacement within the cubic structure, has been examined using temperature-variant powder X-ray diffraction, Raman spectroscopy, electron microscopy, and selected-area electron diffraction measurements. HfV2O7 initially crystallizes in a 3 × 3 × 3 superlattice but undergoes phase transformations to stabilize a cubic structure that exhibits strong and isotropic NTE with a coefficient of thermal expansion (CTE) = -6.7 × 10-6 °C-1 across an extended temperature range of 130-700 °C. Incorporation of HfV2O7 in a high-temperature thermoset polybenzimidazole enables the reduction of compressive stress by 67.3% for a relatively small loading of 26.6 vol % HfV2O7. Based on a composite model, we demonstrate that HfV2O7 can reduce the thermal expansion coefficient of polymer nanocomposite films, even at low volume fractions, as a result of its substantially higher elastic modulus compared to the continuous polymer matrix. By changing the volume fraction of HfV2O7, the overall coefficients of thermal expansion of the film can be tuned to match a range of substrates, thereby mitigating thermal stresses and resolving a fundamental challenge for high-temperature composites and nanocomposite coatings.

Phosphorene nanoribbons (PNRs) have inspired strong research interests to explore their exciting properties that are associated with the unique two-dimensional (2D) structure of phosphorene as well as the additional quantum confinement of the nanoribbon morphology, providing new materials strategy for electronic and optoelectronic applications. Despite several important properties of PNRs, the production of these structures with narrow widths is still a great challenge. Here, a facile and straightforward approach to synthesize PNRs via an electrochemical process that utilize the anisotropic Na

Through diversity of composition, sequence, and interfacial structure, hybrid materials greatly expand the palette of materials available to access novel functionality. The NSF Division of Materials Research recently supported a workshop (October 17–18, 2019) aiming to (1) identify fundamental questions and potential solutions common to multiple disciplines within the hybrid materials community; (2) initiate interfield collaborations between hybrid materials researchers; and (3) raise awareness in the wider community about experimental toolsets, simulation capabilities, and shared facilities that can accelerate this research. This article reports on the outcomes of the workshop as a basis for cross-community discussion. The interdisciplinary challenges and opportunities are presented, and followed with a discussion of current areas of progress in subdisciplines including hybrid synthesis, functional surfaces, and functional interfaces.

FeS nanoplatelets were synthesized using a surfactant-assisted hydrothermal synthesis. The product is highly crystalline and has a preferred growth direction with a [001] plate normal. The platelet...

The search for new functional materials that combine high stability and efficiency with reasonable cost and ease of synthesis is critical for their use in renewable energy applications. Specifically in catalysis, nanoparticles, with their high surface-to-volume ratio, can overcome the cost implications associated with otherwise having to use large amounts of noble metals. However, commercialized materials, that is, catalytic nanoparticles deposited on oxide supports, often suffer from loss of activity because of coarsening and carbon deposition during operation. Exsolution has proven to be an interesting strategy to overcome such issues. Here, the controlled emergence, or exsolution, of faceted iridium nanoparticles from a doped SrTiO3 perovskite is reported and their growth preliminary probed by in situ electron microscopy. Upon reduction of SrIr0.005Ti0.995O3, the generated nanoparticles show embedding into the oxide support, therefore preventing agglomeration and subsequent catalyst degradation. The advantages of this approach are the extremely low noble metal amount employed (∼0.5% weight) and the catalytic activity reported during CO oxidation tests, where the performance of the exsolved SrIr0.005Ti0.995O3 is compared to the activity of a commercial catalyst with 1% loading (1% Ir/Al2O3). The high activity obtained with such low doping shows the possibility of scaling up this new catalyst, reducing the high cost associated with iridium-based materials. Postprint Postprint

Herein we report an ultrasonic- and photobased synthetic approach for the production of size-selective SrTiO3 nanomaterials that are surface-decorated with Pd nanoparticle cocatalysts for applicati...

The hollow core, concentric graphitic shells, and large surface area of the carbon nano-onion (CNO) make these carbon nanostructures promising materials for highly efficient catalytic reactions. Doping CNOs with heteroatoms is an effective method of changing their physical and chemical properties. In these cases, the configurations and locations of the incorporated dopant atoms must be a key factor dictating catalytic activity, yet determining a structural arrangement on the single-atom length scale is challenging. Here we present direct imaging of individual nitrogen and sulfur dopant atoms in CNOs, using an aberration-corrected scanning transmission electron microscopy (STEM) approach, combined with electron energy loss spectroscopy (EELS). Inspection of the statistics of dopant configuration and location in sulfur-, nitrogen-, and co-doped samples reveals dopant atoms to be more closely situated to defects in the graphitic shells for co-doped samples, than in their singly doped counterparts. Correlated with an increased activity for the oxygen reduction reaction in the co-doped samples, this suggests a concerted mechanism involving both the dopant and defect.

Pyrochlore materials with novel properties are in demand with multifunctional applications such as optoelectronics, scintillator materials, and theranostics. Many reports have already indicated the importance of the synthesis technique for Nd2Zr2O7 (NZO) nanoparticles (NPs); however, no explanation has been provided for the reason behind the nature of its phase selectivity. Here, we have explored the structural and optical properties of the NZO NPs synthesized by a molten salt synthesis method. We have synthesized size-tunable NZO NPs and correlated the particle size with their structural behavior and optical performance. All NZO NPs are stabilized in defect fluorite phase. Neutron diffraction provided insight on the behavior of oxygen in the presence of heavy atoms. We have collected bright amalgam of blue and green emission on UV irradiation due to the presence of oxygen vacancies from these NPs. We have carried out in situ XRD and Raman investigations to observe the temperature-induced phase transformation in a controlled argon environment. Interestingly, we have not observed phase change for the molten salt synthesized fluorite NZO NPs; however, we observed phase transformation from a precursor stage to pyrochlore phase by in situ XRD directly. These observations provide a new strategy to synthesize nanomaterials phase-selectively for a variety of applications in materials science.

Metastable materials that represent excursions from thermodynamic minima are characterized by distinctive structural motifs and electronic structure, which frequently underpins new function. The binary oxides of hafnium present a rich diversity of crystal structures and are of considerable technological importance given their high dielectric constants, refractory characteristics, radiation hardness, and anion conductivity; however, high-symmetry tetragonal and cubic polymorphs of HfO2 are accessible only at substantially elevated temperatures (1720 and 2600 °C, respectively). Here, we demonstrate that the core–shell arrangement of VO2 and amorphous HfO2 promotes outwards oxygen diffusion along an electropositivity gradient and yields an epitaxially matched V2O3/HfO2 interface that allows for the unprecedented stabilization of the metastable cubic polymorph of HfO2 under ambient conditions. Free-standing cubic HfO2, otherwise accessible only above 2600 °C, is stabilized by acid etching of the vanadium oxide core. In contrast, interdiffusion under oxidative conditions yields the negative thermal expansion material HfV2O7. Variable temperature powder X-ray diffraction demonstrate that the prepared HfV2O7 exhibits pronounced negative thermal expansion in the temperature range between 150 and 700 °C. The results demonstrate the potential of using epitaxial crystallographic relationships to facilitate preferential nucleation of otherwise inaccessible metastable compounds.

N-type and p-type skutterudite samples with the composition Co x Ni4−x Sb12−y Sn y were synthesized with composition range 0 0.8 and negative otherwise. Seebeck coefficients were low, ranging from −40 to 58 µV K−1. The combination of transmission electron microscopy with electron energy loss spectroscopy and powder X-ray diffraction established that Sn can substitute on 2a and 24g sites in the skutterudite structure. Due to the low Seebeck coefficients, the alloys exhibited low figure of merits (ZT)

Since the observation of single-molecule surface-enhanced Raman scattering (SMSERS) in 1997, questions regarding the nature of the electromagnetic hot spots responsible for such observations still persist. For the first time, we employ electron-energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) to obtain maps of the localized surface plasmon modes of SMSERS-active nanostructures, which are resolved in both space and energy. Single-molecule character is confirmed by the bianalyte approach using two isotopologues of Rhodamine 6G. Surprisingly, the STEM/EELS plasmon maps do not show any direct signature of an electromagnetic hot spot in the gaps between the nanoparticles. The origins of this observation are explored using a fully three-dimensional electrodynamics simulation of both the electron-energy-loss probability and the near-electric field enhancements. The calculations suggest that electron beam excitation of the hot spot is possible, but only when the electron beam is located outside of the junction region.

Plasmonics is a rapidly growing field, yet imaging of the plasmonic modes in complex nanoscale architectures is extremely challenging. Here we obtain spatial maps of the localized surface plasmon modes of high-aspect-ratio silver nanorods using electron energy loss spectroscopy (EELS) and correlate to optical data and classical electrodynamics calculations from the exact same particles. EELS mapping is thus demonstrated to be an invaluable technique for elucidating complex and overlapping plasmon modes.

The use of bottom-up fabrication of nanostructures for nanotechnology inherently requires two-dimensional control of the nanostructures at a particular surface. This could in theory be achieved crystallographically with a structure whose three-dimensional unit cell has two or more—tuneable—dimensions on the nanometre scale. Here, we present what is to our knowledge the first example of a truly periodic two-dimensional nanometre-scale phase separation in any inorganic material, and demonstrate our ability to tune the unit-cell dimensions. As such, it represents great potential for the use of standard ceramic processing methods for nanotechnology. The phase separation occurs spontaneously in the homologous series of the perovskite-based Li-ion conductor, (Nd2/3−xLi3x)TiO3, to give two phases whose dimensions both extend into the nanometre scale. This unique feature could lead to its application as a template for the assembly of nanostructures or molecular monolayers.

We investigated the effect of substrate-induced strain on the metal-insulator transition (MIT) in single-crystalline VO(2) nanobeams. A simple nanobeam-substrate adhesion leads to uniaxial strain along the nanobeam length because of the nanobeam's unique morphology. The strain changes the relative stability of the metal (M) and insulator (I) phases and leads to spontaneous formation of periodic, alternating M-I domain patterns during the MIT. The spatial periodicity of the M-I domains can be modified by changing the nanobeam thickness and the Young's modulus of the substrate.

The well-known vapor-liquid-solid (VLS) mechanism results in high-purity, single-crystalline wires with few defects and controllable diameters, and is the method of choice for the growth of nanowires for a vast array of nanoelectronic devices. It is of utmost importance, therefore, to understand how such wires interact with metallic interconnects-an understanding which relies on comprehensive knowledge of the initial growth process, in which a crystalline wire is ejected from a metallic particle. Though ubiquitous, even in the case of single elemental nanowires the VLS mechanism is complicated by competing processes at multiple heterogeneous interfaces, and despite decades of study, there are still aspects of the mechanism which are not well understood. Recent breakthroughs in studying the mechanism and kinetics of VLS growth have been strongly aided by the use of in situ techniques, and would have been impossible through other means. As well as several systematic studies of nanowire growth, reports which focus on the role and the nature of the catalyst tip reveal that the stability of the droplet is a crucial factor in determining nanowire morphology and crystallinity. Additionally, a reverse of the VLS process dubbed solid-liquid-vapor (SLV) has been found to result in the formation of cavities, or "negative nanowires". Here, we present a series of heating studies conducted in situ in the transmission electron microscope (TEM), in which we observe the complete dissolution of metal oxide nanowires into the metal catalyst particles at their tips. We are able to consistently explain our observations using a solid-liquid-vapor (SLV) type mechanism in which both evaporation at the liquid-vapor interface and adhesion of the catalyst droplet to the substrate surface contribute to the overall rate.

Electromigrated nanogaps have shown great promise for use in molecular scale electronics. We have fabricated nanogaps on free-standing transparent SiN(x) membranes which permit the use of transmission electron microscopy (TEM) to image the gaps. The electrodes are formed by extending a recently developed controlled electromigration procedure and yield a nanogap with approximately 5 nm separation clear of any apparent debris. The gaps are stable, on the order of hours as measured by TEM, but over time (months) relax to about 20 nm separation determined by the surface energy of the Au electrodes. A major benefit of electromigrated nanogaps on SiN(x) membranes is that the junction pinches in away from residual metal left from the Au deposition which could act as a parasitic conductance path. This work has implications to the design of clean metallic electrodes for use in nanoscale devices where the precise geometry of the electrode is important.

We illustrate a simple method to synthesize highly ordered ZnO axial p-n homojunction-containing nanowires using a low temperature method, and on a variety of substrates. X-ray diffraction, scanning transmission electron microscopy, scanning electron microscopy, and Raman spectroscopy are used to reveal high quality single-crystalline wires with a [001] growth direction. The study of electrical transport through a single nanowire based device and cathodoluminescence via scanning transmission electron microscopy demonstrates that an axial p-n junction exists within each ZnO nanowire. This represents the first low temperature synthesis of axial p-n homojunction-containing ZnO nanowires with uniform and controllable diameters.