Search

Sentinel-2 offers great potential for monitoring water quality in inland and coastal waters. However, atmospheric correction in these waters is challenging, and there is no standardized approach yet, but different methods coexist under constant development. The atmospheric correction Case 2 Regional Coast Colour (C2RCC) processor has been recently updated with the C2X-COMPLEX (C2XC). This study is one of the first attempts at exploring its performance, in comparison with C2RCC and C2X, in inland and coastal waters in the east of the Iberian Peninsula, in retrieving water surface reflectance and estimating chlorophyll-a ([Chl-a]), total suspended matter ([TSM]), and Secchi disk depth (ZSD). The relationship between in situ ZSD and Kd_z90max product (i.e., the depth of the water column from which 90% of the water-leaving irradiance is derived) of the C2RCC processors demonstrated the potential of this product for estimating water clarity (r > 0.75). However, [TSM] and [Chl-a] derived from the different processors with default calibration factors were not suitable within the targeted scenarios, requiring recalibration based on optical water types or a shift to dynamic algorithm blending approaches. This would benefit from switching between C2RCC and C2XC, which extends the potential for improving surface reflectance estimates to a wide range of scenarios and suggests a promising future for C2-Nets in operational monitoring of water quality. Jesús Soriano held a pre-doctoral grant funded by Agència de Gestió d’Ajuts Universitaris i de Recerca (2020FI_B2 00148). Esther Patricia Urrego holds a pre-doctoral grant funded by Ministerio de Ciencia, Innovación y Universidades (PRE2019-088232). This research was partially funded by the European Union—ERDF and the Ministry of Science and Innovation and the State Research Agency of Spain under project RTI2018-098651-B-C51 (FLEXL3L4—Advanced Products L3 and L4 for the FLEX-S3 mission).

During the design phase of a satellite mission, end-to-end mission performance simulator (E2ES) tools allow scientists and engineers evaluating the mission concept, consolidating system technical requirements and analyzing the suitability of the implemented technical solutions and data processing algorithms. The generation of synthetic scenes is one of the core parts of an E2ES, providing scenes (ground truth) as would be observed by satellite instruments and used as reference against simulated retrieved mission products. An appropriate generation of the scene also allows assessing the performance of the ground data processing chain replacing real instrument data before the mission is in orbit, for which the fidelity of the scene generation is critical. This paper describes the design of a generic scene generator (GSG) with capabilities to generate complex 3-D synthetic scenes that combine the effects of surface, heterogeneity, topography and atmosphere, and viewing/illumination geometry. The proposed design allows generating consistent high spatial and spectral resolution top-of-atmosphere radiance scenes for multiple instruments based on the use of thematic maps, radiative transfer models, and reflectance databases. The described GSG was implemented within the FLuorescence EXplorer (FLEX) E2ES software tool and showed its capabilities to generate compatible scenes for the fluorescence imaging spectrometer, ocean and land color instrument, and sea and land surface temperature radiometer instruments of ESA’s FLEX/Sentinel-3 tandem mission and to validate the fulfillment of the FLEX mission requirements.

The atmospheric contribution constitutes about 90 percent of the signal measured by satellite sensors over oceanic and inland waters. Over open ocean waters, the atmospheric contribution is relatively easy to correct as it can be assumed that water-leaving radiance in the near-infrared (NIR) is equal to zero and it can be performed by applying a relatively simple dark-pixel-correction-based type of algorithm. Over inland and coastal waters, this assumption cannot be made since the water-leaving radiance in the NIR is greater than zero due to the presence of water components like sediments and dissolved organic particles. The aim of this study is to determine the most appropriate atmospheric correction processor to be applied on Sentinel-2 MultiSpectral Imagery over several types of inland waters. Retrievals obtained from different atmospheric correction processors (i.e., Atmospheric correction for OLI ‘lite’ (ACOLITE), Case 2 Regional Coast Colour (here called C2RCC), Case 2 Regional Coast Colour for Complex waters (here called C2RCCCX), Image correction for atmospheric effects (iCOR), Polynomial-based algorithm applied to MERIS (Polymer) and Sen2Cor or Sentinel 2 Correction) are compared against in situ reflectance measured in lakes and reservoirs in the Valencia region (Spain). Polymer and C2RCC are the processors that give back the best statistics, with coefficients of determination higher than 0.83 and mean average errors less than 0.01. An evaluation of the performance based on water types and single bands−classification based on ranges of in situ chlorophyll-a concentration and Secchi disk depth values- showed that performance of these set of processors is better for relatively complex waters. ACOLITE, iCOR and Sen2Cor had a better performance when applied to meso- and hyper-eutrophic waters, compare with oligotrophic. However, other considerations should also be taken into account, like the elevation of the lakes above sea level, their distance from the sea and their morphology.

Sun induced chlorophyll fluorescence (SICF) emitted by phytoplankton provides considerable insights into the vital role of the carbon productivity of the earth’s aquatic ecosystems. However, the SICF signal leaving a water body is highly affected by the high spectral variability of its optically active constituents. To disentangle the SICF emission from the water-leaving radiance, a new high spectral resolution retrieval algorithm is presented, which significantly improves the fluorescence line height (FLH) method commonly used so far. The proposed algorithm retrieves the reflectance without SICF contribution by the extrapolation of the reflectance from the adjacent regions. Then, the SICF emission curve is obtained as the difference of the reflectance with SICF, the one actually obtained by any remote sensor (apparent reflectance), and the reflectance without SICF, the one estimated by the algorithm (true reflectance). The algorithm first normalizes the reflectance spectrum at 780 nm, following the similarity index approximation, to minimize the variability due to other optically active constituents different from chlorophyll. Then, the true reflectance is estimated empirically from the normalized reflectance at three wavelengths using a machine learning regression algorithm (MLRA) and a cubic spline fitting adjustment. Two large reflectance databases, representing a wide range of coastal and ocean water components and scattering conditions, were independently simulated with the radiative transfer model HydroLight and used for training and validation of the MLRA fitting strategy. The best results for the high spectral resolution SICF retrieval were obtained using support vector regression, with relative errors lower than 2% for the SICF peak value in 81% of the samples. This represents a significant improvement with respect to the classic FLH algorithm, applied for OLCI bands, for which the relative errors were higher than 40% in 59% of the samples.

The FLuorescence EXplorer (FLEX) mission, selected as the European Space Agency's eighth Earth Explorer, aims to globally measure the sun-induced-chlorophyll-fluorescence spectral emission from terrestrial vegetation. In the frame of the FLEX mission, several industrial and scientific studies have analyzed the instrument design, image processing algorithms, or modeling aspects. At the same time, a common tool is needed to address the overall FLEX mission performance by combining all these features. For this reason, an end-to-end mission performance simulator has been developed for the FLEX mission (FLEX-E). This paper describes the FLEX-E software design, which combines the generation of complex synthetic scenes with an advanced modeling of the instrument behavior and the full processing scheme up to the final fluorescence product. The results derived from FLEX-E simulations indicate that the instrument and developed image processing algorithms are able to retrieve the sun-induced fluorescence with an accuracy below the 0.2 $\text{mW}\cdot\text{m}^{-2}\cdot\text{sr}^{-1}\cdot \text{nm}^{-1}$ mission requirement. It is expected that FLEX-E will not only optimize the FLEX retrieval algorithms and technical requirements, but also serve as the baseline for the ground processing implementation and testing of calibration/validation procedures.