Search

Here we report the synthesis and characterization of three quaternary complex chalcogenides, Ag0.72Bi5.48Cu0.88S9 (I), Ag0.70Bi5.30Cu1.3S9 (II), Ag0.34Bi4.54Cu1.98PbS9 (III). All the compounds in this homologous series crystallize in the C2/m space group and can be described as Pavonite structures. This structure type consists of alternating NaCl-like layers with varied thickness (nP), separated by a pair of square pyramids. All the compounds reported here are synthetic analogues of the n = 4 pavonite family and are known as makovickyite minerals. Compounds I–III possess complex crystal structures, consisting of mixed occupancies of Bi/Ag/Pb sites, as well as partially occupied Cu sites. These intrinsic assets lead to ultra-low lattice thermal conductivities, in the range of 0.75–0.42 Wm−1 K−1 from 300–500 K, and make these materials promising candidates for thermoelectric applications. All three structures exhibit very narrow indirect band gaps of less than 0.5 eV as confirmed by DRS measurements. Charge transport properties are consistent with n-type semiconducting behavior with moderate electrical conductivities and large Seebeck coefficients. Low temperature electrical resistivity and Seebeck coefficient measurements are also performed on II. A promising figure of merit, zT, of 0.09 for I and II, 0.11 for III can be achieved at 475 K.

Yb14MnSb11 is a p-type high-temperature thermoelectric material with operational temperatures as high as 1273 K. Rare-earth (RE) substitution into this phase has been shown to increase the melting ...

Multimetallic clusters can be described as building blocks in intermetallics, compounds prepared from all metals and/or semi-metals, and in Zintl phases, a subset of intermetallics containing metals with large differences in electronegativity. In many cases, these intermetallic and Zintl phases provide the first clue for the possibilities of bond formation between metals and semi-metals. Recent advances in multimetallic clusters found in Zintl phases and nanoparticles focusing on Ge with transition metals and semi-metals is presented. Colloidal routes to Ge nanocrystals provide an opportunity for kinetically stabilized Ge-metal and Ge-semi-metal bonding. These routes provide crystalline nanoclusters of Ge, hereafter referred to as nanocrystals, that can be structurally characterized. Compositions of Ge nanocrystals containing transition metals, and the semi-metals, Sb, Bi, and Sn, whose structures have recently been elucidated through EXAFS, will be presented along with potential applications.

Thermoelectric materials are a unique class of compounds that can recycle energy through conversion of heat into electrical energy. A new 21–4–18 Zintl phase has been discovered in the Yb–Mn–Sb sys...

The reduction of Ge halides in oleylamine (OAm) provides a simple, yet effective high-yield synthetic route to germanium nanocrystals (NCs). Significant advances based on this approach include size...

BaFe2As2 superconductors doped with Co or Ni were synthesized by heat treatment of the reactive BaH2 precursor and elemental Fe, Co, Ni, and As in a sealed niobium container. The hydride route prov...

We report the synthesis, structure, and magnetic properties of a new Zintl phase and structure type, Eu11Zn4Sn2As12. The structure and composition of this phase have been established by single-crystal X-ray diffraction and electron microprobe analysis. Eu11Zn4Sn2As12 crystallizes in monoclinic space group C2/c (No. 15) with the following lattice parameters: a = 7.5679(4) A, b = 13.0883(6) A, c = 31.305(2) A, and β = 94.8444(7)° [R1 = 0.0398; wR2 = 0.0633 (all data)]. The anisotropic structural features staggered ethane-like [Sn2As6]12– units and infinite ∞2[Zn2As3]5– sheets extended in the a–b plane. Eu cations fill the space between these anionic motifs. Temperature-dependent magnetic properties and magnetoresistance of this Zintl phase have been studied, and the electronic structure and chemical bonding were elucidated using first-principles quantum chemical calculations (TB-LMTO-ASA). Quantum chemical calculations show that the ethane-like units can be considered as consisting of covalent single bonds;...

Polycrystalline samples of CoAsSb were prepared by annealing a stoichiometric mixture of the elements at 1073 K for 2 weeks. Synchrotron powder X-ray diffraction refinement indicated that CoAsSb adopts arsenopyrite-type structure with space group P21/c. Sb vacancies were observed by both elemental and structural analysis, which indicate CoAsSb0.883 composition. CoAsSb was thermally stable up to 1073 K without structure change but decomposed at 1168 K. Thermoelectric properties were measured from 300 to 1000 K on a dense pellet. Electrical resistivity measurements revealed that CoAsSb is a narrow-band-gap semiconductor. The negative Seebeck coefficient indicated that CoAsSb is an n-type semiconductor, with the maximum value of −132 μV/K at 450 K. The overall thermal conductivity is between 2.9 and 6.0 W/(m K) in the temperature range 300–1000 K, and the maximum value of figure of merit, zT, reaches 0.13 at 750 K. First-principles calculations of the electrical resistivity and Seebeck coefficient confirmed ...

Large crystals of Yb14MgSb11 were grown through a Sn flux method. Magnetic susceptibility measurements yield an effective magnetic moment of 3.4(1) μB, revealing the presence of both divalent and trivalent Yb in Yb14MgSb11. Previously assumed to only contain Yb2+ as in Yb14MnSb11, the mixed valency demonstrates that Yb14MgSb11 is a Zintl phase.

Zintl phases are promising thermoelectric materials because they are composed of both ionic and covalent bonding, which can be independently tuned. An efficient thermoelectric material would have regions of the structure composed of a high-mobility compound semiconductor that provides the “electron–crystal” electronic structure, interwoven (on the atomic scale) with a phonon transport inhibiting structure to act as the “phonon–glass”. The phonon–glass region would benefit from disorder and therefore would be ideal to house dopants without disrupting the electron–crystal region. The solid solution of the Zintl phase, Yb2–xEuxCdSb2, presents such an optimal structure, and here we characterize its thermoelectric properties above room temperature. Thermoelectric property measurements from 348 to 523 K show high Seebeck values (maximum of ∼269 μV/K at 523 K) with exceptionally low thermal conductivity (minimum ∼0.26 W/m K at 473 K) measured via laser flash analysis. Speed of sound data provide additional suppo...

Nanogermanium is a material that has great potential for technological applications, and doped and alloyed Ge nanocrystals (NCs) are actively being considered. New alloys and compositions are possible in colloidal synthesis because the reactions are kinetically rather than thermodynamically controlled. Most of the Group V elements have been shown to be n-type dopants in Ge to increase carrier concentration; however, thermodynamically, Bi shows no solubility in crystalline Ge. Bi-doped Ge NCs were synthesized for the first time in a microwave-assisted solution route. The oleylamine capping ligand can be replaced by dodecanethiol without loss of Bi. A positive correlation between the lattice parameter and the concentration of Bi content (0.5–2.0 mol %) is shown via powder X-ray diffraction and selected area electron diffraction. X-ray photoelectron spectroscopy, transmission electron microscopy (TEM), scanning TEM, and inductively coupled plasma–mass spectroscopy are consistent with the Bi solubility up to ...

The thermal stability and thermoelectric properties of type I clathrate K8Al8Si38 up to 873 K are reported. K8Al8Si38 possesses a high absolute Seebeck coefficient value and high electrical resistivity in the temperature range of 323 to 873 K, which is consistent with previously reported low temperature thermoelectric properties. Samples with Ba partial substitution at the K guest atom sites were synthesized from metal hydride precursors. The samples with the nominal chemical formula of K8–xBaxAl8+xSi38–x (x = 1, 1.5, 2) possess type I clathrate structure (cubic, Pm3n), confirmed by X-ray diffraction. The guest atom site occupancies and thermal motions were investigated with Rietveld refinement of synchrotron powder X-ray diffraction. Transport properties of Ba-containing samples were characterized from 2 to 300 K. The K–Ba alloy phases showed low thermal conductivity and improved electrical conductivity compared to K8Al8Si38. Electrical resistivity and Seebeck coefficients were measured over the tempera...

Two series of crystals were prepared via Sn flux synthesis with the compositional fluxes of Yb14−xLnxMnSb11, where x = 0.1–0.9 and x = 0.4. By X-ray structural measurements and microprobe analysis, the maximum amount of Ln incorporated in the unit cell matrix were determined to be 0.37 ± 0.04 for the La–Nd and 0.45 ± 0.04 for Sm–Tm elements with solid substitution solution formation. The Ln incorporation did not change the unit cell significantly but the cell volume decreased going from the largest La–Nd to the smallest Tm–Lu cations. The Ln0.30–0.40 samples demonstrated congruent melting and their melting points increased by ∼30–50 °C compared to the pristine matrix. The temperatures were attributed to the ordered structural state due to the Ln distribution in the unit cell only through the one regular system site. Based on geometrical fitting between crystal radii of Yb2+ and Ln3+ in six-coordination, the Yb(2) sites were found to be more preferable for substitution by La–Nd, Yb(1) by Sm–Ho and Yb(3) by Tm and Lu atoms. Thermal losses as a temperature function of the alloyed by La and Lu samples were determined by a step-by-step heating procedure with analysis of the vapor condensate deposited on the viewing window of the chamber. This experiment demonstrated a high mobility of the tetrahedral Mn and Sb along with Yb ions in the Yb14MnSb11 matrix with incongruent sublimation beyond 1300 °C and a decrease of the thermal weight losses by half if the matrix was alloyed by La. Occupation of the Yb sites by Ln atoms varied the geometry of the MnSb4 tetrahedron as well as electron properties and bonding in this structural fragment, and these changes are considered in the context of the coupling between chemical structure and thermal stability of the compounds. The improved thermal stability due to increasing the total ionic state of the alloyed samples was found to possibly be a useful factor for the long-time use of these materials for space applications.

The synthesis and transport properties of the family of coinage metal-stuffed Zintl compounds, Eu9Cd4–xCM2+x–y□ySb9 (CM = coinage metal, □ = vacancies), is presented as a function of coinage metal substitution. Eu9Cd4–xCM2+x–y□ySb9 compounds are shown to be rare examples of metallic Zintl phases with low thermal conductivities. While the lattice thermal conductivity is low, which is attributed to the complex structure and presence of interstitials, the electronic contribution to thermal conductivity is also low. In these p-type compounds, the carriers transmit less heat than expected, based on the Wiedemann–Franz law and metallic conduction, κe = L0T/ρ. Density functional theory (DFT) calculations indicate that the Fermi level resides in a pseudo-gap, which is consistent with the metallic description of the properties. While the contribution from the interstitial CM states to the Fermi level is small, the interstitial CMs are required to tune the position of the Fermi level. Analysis of the topology of el...

Compounds of the Yb14MnSb11 structure type are the highest efficiency bulk p-type materials for high temperature thermoelectric applications, with reported figures of merit (ZTs) as high as ∼1.3 at 1275 K. Further optimization of ZT for this structure type is possible with the development of a simple synthetic route. However, this has been difficult to achieve because of the small amount of Mn required compared with Yb and Sb. A simple synthetic route for Yb14MnSb11 has been developed utilizing a combination of ball milling and annealing to produce phase-pure material followed by spark plasma sintering for consolidation. The materials have been characterized by powder X-ray diffraction before and after spark plasma sintering. The stoichiometric reaction of Yb, Sb, and MnSb provides phase-pure powder by X-ray diffraction. Upon cycling to temperatures greater than 1272 K, Yb14MnSb11 shows the presence of Yb11Sb10. Additional samples with 5% and 10% excess Mn were also investigated. Adding 5–10% excess Mn do...

Solid-solution Zintl compounds with the formula Eu11Cd6–xZnxSb12 have been synthesized from the elements as single crystals using a tin flux according to the stoichiometry Eu:Cd:Zn:Sb:Sn of 11:6–xp:xp:12:30 with xp = 0, 1, 2, 3, 4, 5, and 6, where xp is the preparative amount of Zn employed in the reaction. The crystal structures and the compositions were established by single-crystal as well as powder X-ray diffraction and wavelength-dispersive X-ray analysis measurements. The title solid-solution Zintl compounds crystallize isostructurally in the centrosymmetric monoclinic space group C 2/m (No. 12, Z = 2) as the Sr11Cd6Sb12 structure type (Pearson symbol mC58). There is a miscibility gap at 3 ≤ xp ≤ 4 where the major product crystallizes in a disordered structure related to the Ca9Mn4Bi9 structure type; otherwise, for all other compositions, the Sr11Cd6Sb12 structure is the majority phase. Eu11Cd6Sb12 shows lower lattice thermal conductivity relative to Eu11Zn6Sb12 consistent with its higher mean atomi...

A series of alkali metal containing compounds with type I clathrate structure, A8Ga8Si38 (A = K, Rb, Cs) and K8Al8Si38, were synthesized and characterized. Room temperature lattice parameters of A8Ga8Si38 (A = K, Rb, Cs) and K8Al8Si38 were determined to be 10.424916(10), 10.470174(13), 10.535069(15), and 10.48071(2) A, respectively. The type I clathrate structure (cubic, Pm3n) was confirmed for all phases, and in the case of K8Al8Si38 and K8Ga8Si38, the structures were also refined using synchrotron powder diffraction data. The samples were consolidated by Spark Plasma Sintering (SPS) for thermoelectric property characterization. Electrical resistivity was measured by four probe AC transport method in the temperature range of 30 to 300 K. Seebeck measurements from 2 to 300 K were consistent with K8Al8Si38 and K8Ga8Si38 being n-type semiconductors, while Rb8Ga8Si38 and Cs8Ga8Si38 were p-type semiconductors. K8Al8Si38 shows the lowest electrical resistivity and the highest Seebeck coefficient. This phase a...

After the discovery of Yb14MnSb11 as an outstanding p-type thermoelectric material for high temperatures (≥900 K), site substitution of other elements has been proven to be an effective method to further optimize the thermoelectric properties. Yb14−xRExMnSb11 (RE = Pr and Sm, 0 < x < 0.55) compounds were prepared by powder metallurgy to study their thermoelectric properties. According to powder X-ray diffraction, these samples are iso-structural with Yb14MnSb11 and when more than 5% RE is used in the synthesis the presence of (Yb,RE)4Sb3 is apparent after synthesis. After consolidation and measurement, (Yb,RE)Sb and (Yb,RE)11Sb10 appear in the powder X-ray diffraction patterns. Electron microprobe analysis results show that consolidated pellets have small (Yb,RE)Sb domains and that the maximum amount of RE in Yb14−xRExMnSb11 is x = 0.55, however, (Yb,RE)11Sb10 cannot be distinguished by electron microprobe analysis. By replacing Yb2+ with RE3+, one extra electron is introduced into Yb14MnSb11 and the carrier concentration is adjusted. Thermoelectric performance from room temperature to 1275 K was evaluated through transport and thermal conductivity measurements. The measurement shows that Seebeck coefficients initially increase and then remain stable and that electrical resistivity increases with substitutions. Thermal conductivity is slightly reduced. Substitution of Pr and Sm leads to enhanced zT. Yb13.82Pr0.18Mn1.01Sb10.99 has the best maximum zT value of ∼1.2 at 1275 K, while Yb13.80Sm0.19Mn1.00Sb11.02 has its maximum zT of ∼1.0 at 1275 K, respectively, ∼45% and ∼30% higher than Yb14MnSb11 prepared in the same manner.

Magnesium-containing Zintl phase compounds Yb14MgSb11 and Ca14MgSb11 have been prepared by annealing the mixture of the elements at 1075–1275 K. These compounds are isostructural with the Zintl compound Ca14AlSb11 and crystallize in the tetragonal space group I41/acd (Z = 8). Single-crystal X-ray data (90 K) were refined for Yb14MgSb11 [a = 16.625(9) A, c = 22.24(2) A, V = 6145(8) A3, and R1/wR2 (0.0194/0.0398)] and Ca14MgSb11 [a = 16.693(2) A, c = 22.577(5) A, V = 6291(2) A3, R1/wR2 (0.0394/0.0907)]. This structure type has been shown to be highly versatile with a large number of phases with the general formula A14MPn11 (A = Ca, Sr, Ba, Yb, Eu; M = Mn, Zn, Nb, Cd, Group 13 elements; Pn = Group 15 elements). The two compounds reported in this paper are the first Mg-containing analogs. Replacing M with Mg, which is divalent with no d-orbitals, probes electronic structure and properties of this structure type. Mg2+ is well-known to prefer tetrahedral geometry and allows for integration of the properties of ...

We have developed a fast, easy, and scalable synthesis method for Ba1xKxFe2As2 (0 ≤ x ≤ 1) superconductors using hydrides BaH2 and KH as a source of barium and potassium metals. Synthesis from hydrides provides better mixing and easier handling of the starting materials, consequently leading to faster reactions and/or lower synthesis temperatures. The reducing atmosphere provided by the evolved hydrogen facilitates preparation of oxygen-free powders. By a combination of methods we have shown that Ba1xKxFe2As2 obtained via hydride route has the same characteristics as when it is prepared by traditional solid-state synthesis. Refinement from synchrotron powder X-ray diffraction data confirms a linear dependence of unit cell parameters upon K content as well as the tetragonal to orthorhombic transition at low temperatures for compositions with x < 0.2. Magnetic measurements revealed dome-like dependence of superconducting transition temperature Tc upon K content with a maximum of 38 K for x close to 0.4. Electron diffraction and high-resolution high-angle annular dark-field scanning transmission electron microscopy indicates an absence of Ba/K ordering, while local inhomogeneity in the Ba/K distribution takes place at a scale of several angstroms along [110] crystallographic direction.

A thermochemical study of three germanium allotropes by differential scanning calorimetry (DSC) and oxidative high-temperature drop solution calorimetry with sodium molybdate as the solvent is described. Two allotropes, microcrystalline allo-Ge (m-allo-Ge) and 4H-Ge, have been prepared by topotactic deintercalation of Li_7Ge_(12) with methanol (m-allo-Ge) and subsequent annealing at 250 °C (4H-Ge). Transition enthalpies determined by differential scanning calorimetry amount to 4.96(5) ± 0.59 kJ/mol (m-allo-Ge) and 1.46 ± 0.55 kJ/mol (4H-Ge). From high-temperature drop solution calorimetry, they are energetically less stable by 2.71 ± 2.79 kJ/mol (m-allo-Ge) and 5.76 ± 5.12 kJ/mol (4H-Ge) than α-Ge, which is the stable form of germanium under ambient conditions. These data are in agreement with DSC, as well as with the previous quantum chemical calculations. The morphology of the m-allo-Ge and 4H-Ge crystallites was investigated by a combination of scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. Even though the crystal structures of m-allo-Ge and 4H-Ge cannot be considered as truly layered, these phases retain the crystalline morphology of the layered precursor Li_7Ge_(12). Investigation by diffuse reflectance infrared Fourier transform spectroscopy and UV–vis diffuse reflectance measurements reveal band gaps in agreement with quantum chemical calculations.

Applications of Ge nanocrystals (NCs) are limited by the stability and air reactivity of the Ge surface. In order to promote stability and increase the diversity of ligand functionalization of Ge NCs, the preparation of thiol-passivated Ge NCs via a ligand exchange process was investigated. Herein a successful replacement of oleylamine ligands on the surface of Ge NCs with dodecanethiol is reported. The successful ligand exchange was monitored by FTIR and NMR spectroscopy and it was found that dodecanethiol provided a better surface coverage, leading to stable Ge NC dispersions. Dodecanethiol capping also enabled band gap determination of the NCs by surface photovoltage (SPV) spectroscopy. The SPV measurements indicated an efficient charge separation in the ligand-exchanged Ge NCs. On the other hand, oleylamine-terminated Ge NCs of similar sizes exhibited a very small photovoltage, indicating a poorly passivated surface.

Zintl phases are compounds that have shown promise for thermoelectric applications. The title solid–solution Zintl compounds were prepared from the elements as single crystals using a tin flux for compositions x = 0, 1, 2, and 3. Eu_(11)Cd_6Sb_(12–x)As_x (x < 3) crystallize isostructurally in the centrosymmetric monoclinic space group C2/m (no. 12, Z = 2) as the Sr_(11)Cd_6Sb_(12) structure type (Pearson symbol mC58). Efforts to make the As compositions for x exceeding ~3 resulted in structures other than the Sr_(11)Cd_6Sb_(12) structure type. Single-crystal X-ray diffraction indicates that As does not randomly substitute for Sb in the structure but is site specific for each composition. The amount of As determined by structural refinement was verified by electron microprobe analysis. Electronic structures and energies calculated for various model structures of Eu_(11)Cd_6Sb_(10)As_2 (x = 2) indicated that the preferred As substitution pattern involves a mixture of three of the six pnicogen sites in the asymmetric unit. In addition, As substitution at the Pn4 site opens an energy gap at the Fermi level, whereas substitution at the other five pnicogen sites remains semimetallic with a pseudo gap. Thermoelectric properties of these compounds were measured on hot-pressed, fully densified pellets. Samples show exceptionally low lattice thermal conductivities from room temperature to 775 K: 0.78–0.49 W/mK for x = 0; 0.72–0.53 W/mK for x = 1; and 0.70–0.56 W/mK for x = 2. Eu_(11)Cd_6Sb_(12) shows a high p-type Seebeck coefficient (from +118 to 153 μ V/K) but also high electrical resistivity (6.8 to 12.8 mΩ·cm). The value of zT reaches 0.23 at 774 K. The properties of Eu_(11)Cd_6Sb_(12–x)As_x are interpreted in discussion with the As site substitution.

Single crystals of Yb14-xRExMnSb11 (0x0.6, RE = Pr, Nd, Sm, and Gd) were synthesized by Sn flux. The compounds are iso-structural with Ca14AlSb11 (I41/acd), and their compositions were determined by wavelength-dispersive spectroscopy. Yb14MnSb11 is described as a partially screened d-metal Kondo system with the isolated [MnSb4](9-) tetrahedral cluster having a d(5) + hole configuration that results in four unpaired electrons measured in the ferromagnetically ordered phase. All of the Yb atoms in Yb14MnSb11 are present as Yb(2+), and the additional RE in Yb14-xRExMnSb11 is trivalent, contributing one additional electron to the structure and altering the magnetic properties. All compounds show ferromagnetic ordering in the range of 39-52 K attributed to the [MnSb4](9-) magnetic moment. Temperature-dependent DC magnetization measurements of Yb14-xPrxMnSb11 (0.44 ≤ x ≤ 0.56) show a sharp downturn right below the ferromagnetic transition temperature. Single-crystal neutron diffraction shows that this downturn is caused by a spin reorientation of the [MnSb4](9-) magnetic moments from the ab-plane to c-axis. The spin reorientation behavior, caused by large anisotropy, is also observed for similar x values of RE = Nd but not for RE = Sm or Gd at any value of x. In Pr-, Nd-, and Sm-substituted crystals, the saturation moments are consistent with ∼4 unpaired electrons attributed to [MnSb4](9-), indicating that local moments of Pr, Nd, and Sm do not contribute to the ferromagnetic order. In the case of RE = Pr, this is confirmed by neutron diffraction. In contrast, the magnetic measurements of RE = Gd show that the moments of Gd ferromagnetically order with the moments of [MnSb4](9-), and reduced screening of moments on Mn(2+) is evident. The sensitive variation of magnetic behavior is attributed to the various RE substitutions resulting in different interactions of the 4f-orbitals with the 3d-orbitals of Mn in the [MnSb4](9-) cluster conducted through 5p-orbitals of Sb.

A facile size-controlled synthesis (microwave/conventional) of quasi-spherical germanium nanoparticles is reported. Oleylamine serves as a solvent, a binding ligand, and a reducing agent in the synthesis. Reactions were carried out with microwave-assisted heating, and the results have been compared with those produced by conventional heating. Germanium iodides (GeI4, GeI2) were used as the Ge precursor, and size control in the range of 4–11 nm was achieved by controlling the ratio of Ge4+/Ge2+ in the precursor mix. Longer reaction times and higher temperatures were also observed to have an effect on the nanoparticle size distribution. Microwave heating resulted in crystalline nanoparticles at lower temperatures than conventional resistive heating because of the ability of germanium iodides to convert electromagnetic radiation directly to heat. The reported approach for germanium nanoparticle preparation avoids the use of strong reducing agents (LiAlH4, n-BuLi, NaBH4) and HF for etching and, thus, can be c...

A microwave-assisted reaction has been developed to produce hydrogen-terminated silicon quantum dots (QDs). The Si QDs were passivated for water solubility via two different methods: hydrosilylation produced 3-aminopropenyl-terminated Si QDs, and a modified Stöber process produced silica-encapsulated Si QDs. Both methods produce water-soluble QDs with maximum emission at 414 nm, and after purification, the QDs exhibit intrinsic fluorescence quantum yield efficiencies of 15 and 23%, respectively. Even though the QDs have different surfaces, they exhibit nearly identical absorption and fluorescence spectra. Femtosecond transient absorption spectroscopy was used for temporal resolution of the photoexcited carrier dynamics between the QDs and ligand. The transient dynamics of the 3-aminopropenyl-terminated Si QDs is interpreted as a formation and decay of a charge-transfer (CT) excited state between the delocalized π electrons of the carbon linker and the Si core excitons. This CT state is stable for ~4 ns before reverting back to a more stable, long-living species. The silica-encapsulated Si QDs show a simpler spectrum without CT dynamics.

Chemical hydrides are compounds that can potentially uptake and release hydrogen without the use of hydrogen gas. Nanostructure silicon may have great potential as a chemical hydride. The surface can be capped by hydride and dihydride, and hydrogen can be thermally desorbed from the surface. We have prepared large-scale (1−2 g) samples of hydrogen-capped silicon nanoparticles with average diameters of 60, 10, 5, and 4 nm via a low-temperature chemical method to explore the release of hydrogen from the surface as a function of size. The 60- and 10-nm-diameter particles have only hydrogen on the surface. The 60-nm-diameter particles are crystalline, and the 10-nm-diameter particles are amorphous according to powder X-ray diffraction (XRD). The 5- and 4-nm-diameter particles have both hydrogen and solvent capped on the surface. The 4-nm-diameter particles are amorphous and the 5-nm-diameter particles are crystalline by powder XRD. Weight percentages of ∼3.5% at 350 °C are observed for the 10-nm-diameter part...

Two rare-earth Zintl phases, Yb_(11)GaSb_9 and Yb_(11)InSb_9, were synthesized in high-temperature self-fluxes of molten Ga and In, respectively. Structures were characterized by both single-crystal X-ray diffraction and powder X-ray diffraction and are consistent with the published orthorhombic structure, with the space group Iba2. High-temperature differential scanning calorimetry (DSC) and thermal gravimetry (TG) measurements reveal thermal stability to 1300 K. Seebeck coefficient and resistivity measurements to 1000 K are consistent with the hypothesis that Yb_(11)GaSb_9 and Yb_(11)InSb_9 are small band gap semiconductors or semimetals. Low doping levels lead to bipolar conduction at high temperature, preventing a detailed analysis of the transport properties. Thermal diffusivity measurements yield particularly low lattice thermal conductivity values, less than 0.6 W/m K for both compounds. The low lattice thermal conductivity suggests that Yb_(11)MSb_9 (M = Ga, In) has the potential for high thermoelectric efficiency at high temperature if charge-carrier doping can be controlled.

Single crystals of EuGa2Pn2 (Pn = P, As) were grown from a molten Ga flux and characterized by single-crystal X-ray diffraction at 100(1) K. They are isostructural and crystallize in a new structure type (monoclinic, P2/m, a = 9.2822(9) A, b = 3.8967(4) A, c = 12.0777(11) A, β = 95.5220(10)°, R1 = 0.0148, wR2 = 0.0325 (EuGa2P2) and a = 9.4953(7) A, b = 4.0294(3) A, c = 12.4237(9) A, β = 95.3040(10)°, R1 = 0.0155, wR2 = 0.0315 (EuGa2As2)). The structures consist of alternating layers of two-dimensional Ga2Pn2 anions and Eu cations. The anion layers are composed of Ga2Pn6 staggered, ethane-like moieties having a rare Ga−Ga bonding motif; these moieties are connected in a complex fashion by means of shared Pn atoms. Both structures show small residual electron densities that can be modeled by adding a Eu atom and removing two bonded Ga atoms, resulting in structures (

A series of compounds, Yb_(14)Mn_(1−x)Al_xSb_11 with (0 < x < 1), was prepared via Sn flux and the structures investigated. Single-crystal X-ray diffraction reveals that the volume of the unit cell increases with increasing Al content. Bond-distance changes are less than 2% and the increase in volume of the unit cell is associated with the decreasing distortion of the tetrahedron with increasing Al content. The specific heat, C_p, was measured from 300 to 1100 K. The measured C_p for these compounds is 19% higher than the Dulong-Petit value at the peak zT temperature (1223 K). These measured values permit a recalculation of thermal conductivity, revealing an extremely low lattice thermal conductivity of approximately 0.3−0.4 W/(m K) at 1223 K. The maximum zT of Yb_(14)Mn(1−x)Al_xSb_11 is approximately 0.8 and 1.1 for the x = 0 and x = 0.6 compositions, respectively.

Rare-earth transition metal compounds Yb_(14)Mn_(1−x)Zn_xSb_(11), isostructural with Ca_(14)AlSb_(11), have been prepared using a metal flux growth technique for thermoelectric property measurements (with x = 0.0, 0.2, 0.3, 0.4, 0.7, 0.9, and 1.0). Single-crystal X-ray diffraction and electron microprobe analysis data indicate the successful synthesis of a solid-solution for the Yb_(14)Mn_(1−x)Zn_xSb_(11) structure type for 0 0.4. High-temperature (298 K–1275 K) measurements of the Seebeck coefficient, resistivity, and thermal conductivity were performed on hot-pressed, polycrystalline samples. As the concentration of Zn increases in Yb_(14)Mn_(1−x)Zn_xSb_(11), the Seebeck coefficient remains unchanged for 0 ≤ x ≤ 0.7 indicating that the free carrier concentration has remained unchanged. However, as the nonmagnetic Zn^(2+) ions replace the magnetic Mn^(2+) ions, the spin disorder scattering is reduced, lowering the resistivity. Replacing the magnetic Mn^(2+) with non magnetic Zn^(2+) provides an independent means to lower resistivity without deleterious effects to the Seebeck values or thermal conduction. Alloying the Mn site with Zn reduces the lattice thermal conductivity at low temperatures but has negligible impact at high temperatures. The reduction of spin disorder scattering leads to an ∼10% improvement over Yb_(14)MnSb_(11), revealing a maximum thermoelectric figure of merit (zT) of ∼1.1 at 1275 K for Yb_(14)Mn_(0.6)Zn_(0.4)Sb_(11).

The feasibility of using silanization as a general tool to functionalize the surface of silicon nanoparticles (NPs) has been investigated in detail. Silicon NPs were prepared from reduction of silicon tetrachloride with sodium naphthalide. The terminal chloride on the surface of as-synthesized particles was substituted by methanol and water, in sequence. The particles were then silanized by octyltrichlorosilane, 11-bromoundecyltrichlorosilane, or 2-(carbomethoxy)ethyltrichlorosilane. These treatments yielded alkyl-, bromo-, or ester-termini on NP surfaces, respectively. The NPs were characterized by TEM, NMR, FTIR, UV–Vis, and PL spectroscopy. Changes of termination groups brought various functionalities to the NPs, without loss of the photophysics of the original NPs.

A hydrogen-encapsulated inorganic clathrate, which is stable at ambient temperature and pressure, has been prepared in high yield. Na5.5(H2)2.15Si46 is a sodium-deficient, hydrogen-encapsulated, type I silicon clathrate. It was prepared by the reaction between NaSi and NH4Br under dynamic vacuum at 300 degrees C. The Rietveld refinement of the powder X-ray diffraction data is consistent with the clathrate type I structure. The type I clathrate structure has two types of cages where the guest species, in this case Na and H2, can reside: a large cage composed of 24 Si, in which the guest resides in the 6d crystallographic position, and a smaller one composed of 20 Si, in which the guest occupies the 2a position. Solid-state 23Na, 1H, and 29Si MAS NMR confirmed the presence of both sodium and hydrogen in the clathrate cages. 23Na NMR shows that sodium completely fills the small cage and is deficient in the larger cage. The 1H NMR spectrum shows a pattern consistent with mobile hydrogen in the large cage. 29Si NMR spectrum is consistent with phase pure type I clathrate framework. Elemental analysis is consistent with the stoichiometry Na5.5(H2.15)2Si46. The sodium occupancy was also examined using spherical aberration (Cs) corrected scanning transmission electron microscopy (STEM). The high-angle annular dark-field (HAADF) STEM experimental and simulated images indicated that the Na occupancy of the large cage, 6d sites, is less than 2/3, consistent with the NMR and elemental analysis.

Synthesis of silicon nanoparticles of various sizes from 3 to 9 nm in diameter was accomplished via a low temperature solution route. These nanoparticles are prepared via reduction of SiCl4 with Na naphthalide in dimethoxyethane and capped with octasiloxane. The resulting nanoparticles were characterized by transmission electron microscopy (TEM), high resolution (HR) TEM, selected area electron diffraction (SAED), energy dispersive X-ray (EDX) spectroscopy, powder X-ray diffraction, UV–vis, photoluminescence, and their quantum yields were determined. TEM micrographs show that the nanoparticles are well dispersed and SAED and lattice fringes are consistent with diamond structured silicon. X-ray powder diffraction provides no diffraction peaks. UV–vis and photoluminescence show characteristic shifts corresponding to size, consistent with quantum confinement. The smallest sized nanoparticles show the largest quantum yield, consistent with an indirect bandgap nanoparticles.

Homogeneous, nanocrystalline La1-xSrxMnO3 (LSM) powders, with x ∼ 0.15, were synthesized with the epoxide addition sol−gel method. Through this simple technique, sol−gel materials were prepared from methanolic solutions of metal chlorides without the need for alkoxides, polymeric gel agents, or elaborate reaction schemes. The gels were dried in ambient conditions, resulting in mesoporous xerogels with networked nanostructures interconnecting particulate regions. Calcination of the dried gels resulted in the crystallization of single-phase LSM by 700 °C, after decomposition of intermediate hydroxide, chloride, and oxychloride compounds. SEM analysis indicated that the calcined powders were nanocrystalline and consisted of discrete particles, free of hard agglomeration. The average crystallite size and equivalent spherical diameter determined from XRD line broadening and BET analysis, respectively, were in good agreement with the SEM results (∼100 nm). The activation energies for the electronic conductivity...

Thermoelectric materials provide a key solution to energy problems through the conversion of heat into electrical energy. We report that the complex Zintl compound, Yb14MnSb11, breaks a 2-decade stagnation in high-temperature (>900 K), p-type materials development for thermoelectric power generation. This material achieves quadrupled efficiency and virtually doubled figure of merit over the current state-of-the-art, SiGe, thus earmarking it superior for thermoelectric applications in segmented devices. Yb14MnSb11 represents the first complex Zintl phase with substantially higher figure of merit and efficiency than any other competing materials, opening a new class of thermoelectric compounds with remarkable chemical and physical properties.

Various reaction conditions, such as reductant, time, procedure, concentration, and temperature, were investigated with the aim of finding a simple, optimized synthetic route for the synthesis of crystalline germanium nanoparticles. Results from these studies indicate that sodium naphthalide is an ideal reductant and that the reaction is virtually complete within 10 min. Furthermore, it was observed that a two-pot synthesis resulted in a cleaner, narrower distribution of nanoparticle size and that the narrowest size distribution (∼20%) was produced when a dilute Na(naphth) in glyme mixture was utilized. The optimum initial reduction temperature was found to be 0 °C. It was also shown that concentration and temperature play an important role in controlling nanoparticle size. The best reaction conditions, as stated above, produced nanoparticles with a size dispersion of ∼20% when combined. Transmission electron microscopy (TEM), selected-area electron diffraction (SAED), high-resolution TEM (HRTEM), energy-...

Core/shell structured iron(Fe)/gold(Au) nanoparticles have been prepared by a reverse micelle method, and their potential application as magnetic resonance (MR) contrast agent investigated. The average nanoparticle size is 19 nm, as determined by x-ray powder diffraction (XRD) and transmission electron microscopy (TEM). Magnetic properties and relaxivities of nanoparticles are presented and compared. The saturation magnetization is 81 emu g−1 Fe for freshly prepared nanoparticles and the particles have high r1(6.87 mM−1 s−1) when the Fe core is kept from oxidation. These nanoparticles may be used as T1 agents in the unoxidized form.

Single crystals of a new Zintl compound, EuIn2P2, were grown from indium metal as a flux solvent. The compound crystallizes in the hexagonal P6(3)/mmc space group with a unit cell of a = 4.0829(6) A, c = 17.595(4) A, and Z = 2. It contains alternating Eu2+ layers and [In2P2]2- layers. This compound is paramagnetic at high temperatures with a magnetic transition at 24 K. In the magnetically ordered state, it shows large magnetic anisotropy. The temperature-dependent resistivity of this compound suggests interaction between conduction electrons and local spins. Negative colossal magnetoresistance of up to −398% (MR = {[ρ(H) − ρ(0)]/ρ(H)} × 100%) at 5 T is observed at 24 K.

Butyl-capped crystalline germanium (Ge) nanoparticles were synthesized at room temperature in dimethoxyethane by reduction of GeCl4 with Na(naphthalide) and subsequent reaction with butyl Grignard. The nanoparticles were isolated in hexane and characterized by transmission electron microscopy (TEM), selected area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDX), elemental analysis, and X-ray powder diffraction (XRD). The product from this room-temperature reaction was heated under vacuum at temperatures of 200−600 °C at 50 °C intervals. The product obtained from the 300 °C treatment was soluble in hexane, while the products from temperatures greater than 300 °C were not. SAED was consistent with crystalline Ge from the initial synthesis at room temperature and amorphous Ge for the product heated under vacuum to 300 °C. X-ray powder diffraction of the 300 °C product shows the transition from amorphous to crystalline nanoparticles occurring between 550 and 600 °C. TEM shows that the n...

Homogeneous, nanocrystalline powders of yttria-stabilized zirconia (YSZ) were prepared using a non-alkoxide sol−gel method. Monolithic gels, free of precipitation, were prepared by addition of propylene oxide to aqueous solutions of Zr4+ and Y3+ chlorides at room temperature. The gels were dried with supercritical CO2(l), resulting in amorphous aerogels that crystallized into stabilized ZrO2 following calcination at 500 °C. The aerogels and resulting crystalline products were characterized using in situ temperature profile X-ray diffraction, Raman spectroscopy, thermal analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), nitrogen adsorption/desorption analysis, and elemental analysis by inductively coupled plasma-atomic emission spectroscopy. TEM and N2 adsorption/desorption analysis of an aerogel prepared by this method indicated a porous network structure with a high surface area (409 m2/g). The crystallized YSZ maintained high surface area (159 m2/g) upon formation of h...

The chemical reactivity of current collector pastes, utilized in electrode performance measurements, were investigated with respect to the solid oxide fuel cell composite cathode, (La 85 Sr 15 ) .98 MnO 3 /8 mol% Y 2 O 3 -stabilized ZrO 2 (LSM/YSZ). Anode substrate single cells were prepared with Pt or Ag paste current collectors applied to the electrodes. Phase purity of the cathodes before and after sintering the current collectors were examined with powder X-ray diffraction (XRD) and the performance of the cells determined with current-potential measurements. XRD experiments provided evidence that Pt paste, containing a bismuth flux, reacted with the composite cathode at temperatures above 800 °C leading to formation of the pyrochlore phase, La 2 Zr 2 O 7 . Cathodes coated with Ag paste, which did not contain a bismuth flux, showed no sign of chemical degradation. Synthesized Bi-subnitrate and commercial Bi 2 O 3 were shown to have similar chemical reactions with LSM/YSZ powders leading to pyrochlore phase formation. Current-potential experiments on single test cells demonstrated that samples prepared with paste containing bismuth flux had a decrease in initial performance.

Silicon nanoparticles (NPs) of ∼4.5(1.10) nm from a room-temperature solution route are terminated by a silanization method for the first time. Energy-selected emission is observed, consistent with the distribution of sizes obtained by this route. The NPs are photochemically stable in nonpolar organic solvents and when exposed to air/water under ambient conditions for up to 1 year. The nanoparticles were characterized by TEM, HRTEM, EDX, SAED, FTIR, 1H/13C NMR, UV−vis, and photoluminescence (PL) spectroscopy.

Alkyl-capped and alkyl/alkoxy-capped silicon nanocrystals have been prepared by the oxidation of magnesium silicide with bromine. High-resolution transmission electron microscopy confirmed the crystalline nature of the nanoparticles and provided an average diameter of 4.5 (2.0) nm for the alkyl-capped and for the alkyl/alkoxy-capped nanoparticles. Energy-dispersive X-ray spectroscopy showed that the nanoparticles are composed of silicon, with no evidence of unreacted bromine. FTIR spectra were consistent with alkyl- and alkyl/alkoxy-capped surfaces. Fluorescence spectroscopy indicated strong ultraviolet-blue photoluminescence, which was attributed to both quantum confinement and surface termination. These nanoparticles displayed long-term stability and no degradation of the photoluminescence was observed for a period of 1 year.

X-ray magnetic circular dichroism (XMCD) measurements on Yb14MnSb11 provide experimental evidence of a moment of 5 microB on Mn, with partial cancellation by an opposing moment on the Sb4 cage surrounding each Mn ion. The compound is isostructural to Ca14AlSb11, with Mn occupying the Al site in the AlSb4(9-) discrete tetrahedral, anionic unit. Bulk magnetization measurements indicate a saturation moment of 3.90 +/- 0.02 microB/formula unit consistent with four unpaired spins and implying a Mn3+, high-spin d4 state. XMCD measurements reveal that there is strong dichroism in the Mn L23 edge, the Sb M45 edge shows a weak dichroism indicating antialignment to the Mn, and the Yb N45 edge shows no dichroism. Comparisons of the Mn spectra with theoretical models for Mn2+ show excellent agreement. The bulk magnetization can be understood as Mn with a moment of 5 microB and a 2+ configuration, with cancellation of one spin by an antialigned moment from the Sb 5p band of the Sb4 cage surrounding the Mn.