Search

The strong C-H bond activation of hydrocarbons is a difficult reaction in environmental and biological chemistry. Herein, a high-valent manganese(IV)-hydroxo complex, [Mn

Photocatalytic generation of nitrenes and radicals can be used to tune or even control their reactivity. Photocatalytic activation of sulfonyl azides leads to the elimination of N

Contains fulltext : 292790.pdf (Publisher’s version ) (Open Access)

Pd-catalyzed C–H functionalization reactions of non-directed substrates have recently emerged as an attractive alternative to the use of directing groups. Key to the success of these transformations has been the discovery of new ligands capable of increasing both the reactivity of the inert C–H bond and the selectivity of the process. Among them, a new type of S,O-ligand has been shown to be highly efficient in promoting a variety of Pd-catalyzed C–H olefination reactions of non-directed arenes. Despite the success of this type of S,O-ligand, its role in the C–H functionalization processes is unknown. Herein, we describe a detailed mechanistic study focused on elucidating the role of the S,O- ligand in the Pd-catalyzed C–H olefination of non-directed arenes. For this purpose, several mechanistic tools, including isolation and characterization of reactive intermediates, NMR and kinetic studies, isotope effects and DFT calculations have been employed. The data from these experiments suggest that the C–H activation is the rate-determining step in both cases with and without the S,O-ligand. Furthermore, the results indicate that the S,O-ligand triggers the formation of more reactive Pd cationic species, which explains the observed acceleration of the reaction. Together, these studies shed light on the role of the S,O-ligand in promoting Pd-catalyzed C–H functionalization reactions We acknowledge nancial support from NWO through a VIDI grant (723.013.006) and from MCIN-PID2019-110008GB-I00. E. G.-B. thanks SGIker (UPV/EHU) for providing human and computational resources.

Here we describe a photoswitchable iron(III) salen phosphate catalyst, which is able to catalyze the enantiodivergent oxidation of prochiral aryl alkyl sulfides to chiral aryl alkyl sulfoxides. The stable (S)-axial isomer of the catalyst produced enantioenriched sulfoxides with the (R)-configuration in up to 75 % e.e., whereas the photoisomerized metastable (R)-axial isomer of the catalyst favored the formation of (S)-sulfoxides in up to 43 % e.e. The maximum Δe.e. value obtained in the enantiodivergent sulfoxidation was 118 %, which is identical to the maximum Δe.e. value that was measured in the enantiodivergent epoxidation of alkenes by a related recently described Mn1 catalyst. This iron-based catalyst broadens the scope of photoswitchable enantiodivergent catalysts and may be used in the future to develop a photoswitchable catalytic system that can write digital information on a polymer chain in the form chiral sulfoxide functions.

Contains fulltext : 292792.pdf (Publisher’s version ) (Open Access) 01 mei 2023

Living systems use enzymatic reaction networks to process biochemical information and make decisions in response to external or internal stimuli. Here, we present a modular and reusable platform for molecular information processing using enzymes immobilised in hydrogel beads and compartmentalised in a continuous stirred tank reactor. We demonstrate how this setup allows us to perform simple arithmetic operations, such as addition, subtraction and multiplication, using various concentrations of substrates or inhibitors as inputs and the production of a fluorescent molecule as the readout.

Aromatic rings form energetically favorable interactions with many polar groups in chemical and biological systems. Recent molecular studies have shown that sulfonamides can chelate metal ions and form hydrogen bonds, however, it is presently not established whether the polar sulfonamide functionality also interacts with aromatic rings. Here, synthetic, spectroscopic, structural, and quantum chemical analyses on 2,6-diarylbenzenesulfonamides are reported, in which two flanking aromatic rings are positioned close to the central sulfonamide moiety. Fine-tuning the aromatic character by substituents on the flanking rings leads to linear trends in acidity and proton affinity of sulfonamides. This physical-organic chemistry study demonstrates that aromatic rings have a capacity to stabilize sulfonamides via through-space NH–π interactions. These results have implications in rational drug design targeting electron-rich aromatic rings in proteins.

The construction of macromolecular hosts that are able to thread chiral guests in a stereoselective fashion is a big challenge. We herein describe the asymmetric synthesis of two enantiomeric C2-symmetric porphyrin macrocyclic hosts that thread and bind different viologen guests. Time-resolved fluorescence studies show that these hosts display a factor 3 kinetic preference (ΔΔG‡on = 3 kJ mol−1) for threading onto the different enantiomers of a viologen guest appended with bulky chiral 1-phenylethoxy termini. A smaller kinetic selectivity (ΔΔG‡on = 1 kJ mol−1) is observed for viologens equipped with small chiral sec-butoxy termini. Kinetic selectivity is absent when the C2-symmetric hosts are threaded onto chiral viologens appended with chiral tails in which the chiral moieties are located in the centers of the chains, rather than at the chain termini. The reason is that the termini of the latter guests, which engage in the initial stages of the threading process (entron effect), cannot discriminate because they are achiral, in contrast to the chiral termini of the former guests. Finally, our experiments show that the threading and de-threading rates are balanced in such a way that the observed binding constants are highly similar for all the investigated host–guest complexes, i.e. there is no thermodynamic selectivity., Chiral guests display kinetic stereoselective threading through chiral porphyrin cages if their chirality is located at the chain ends and not in the centers, supporting the previously reported entron effect of threading.

The product of a revealed transformation-NHC-ethynyl coupling-was observed as a catalyst transformation pathway in the Sonogashira cross-coupling, catalyzed by Pd/NHC complexes. The 2-ethynylated azolium salt was isolated in individual form and fully characterized, including X-ray analysis. A number of possible intermediates of this transformation with common formulae (NHC)n Pd(C2 Ph) (n=1,2) were observed and subjected to collision-induced dissociation (CID) and infrared multiphoton dissociation (IRMPD) experiments to elucidate their structure. Measured bond dissociation energies (BDEs) and IRMPD spectra were in an excellent agreement with quantum calculations for coupling product π-complexes with Pd0 . Molecular dynamics simulations confirmed the observed multiple CID fragmentation pathways. An unconventional methodology to study catalyst evolution suggests the reported transformation to be considered in the development of new catalytic systems for alkyne functionalization reactions.

Paramagnetic metallohost systems can bind guest molecules and find application as biomimetic catalysts. Due to the presence of the paramagnetic metal center, rigorous characterization of these systems by NMR spectroscopy can be very difficult. We report here that metallohost-guest systems can be studied by using the paramagnetic relaxation enhancement (PRE) effect. Manganese(III) porphyrin cage compounds are shown through their PRE to thread and bind viologen guests, including a polymeric one. The binding constants and dethreading activation parameters are lower than those of the metal-free porphyrin cage compounds, which is proposed to be a result of charge repulsion of the trivalent metal center and dicationic viologen guest. The threading rate of the manganese(III) porphyrin cage onto the polymer is more than 10 times faster than that of the non-metallated one, which is ascribed to initial binding of the cage to the polymer chain prior to threading, and to an entron effect.

The copper(I), silver(I), and gold(I) metals bind π-ligands by σ-bonding and π-back bonding interactions. These interactions were investigated using bidentate ancillary ligands with electron donating and withdrawing substituents. The π-ligands span from ethylene to larger terminal and internal alkenes and alkynes. Results of X-ray crystallography, NMR, and IR spectroscopy and gas phase experiments show that the binding energies increase in the order AgCuAu and the binding energies are slightly higher for alkynes than for alkenes. Modulation of the electron density at the metal using substituents on the ancillary ligands shows that the π-back bonding interaction plays a dominant role for the binding in the copper and gold complexes.

Gold(II) complexes are rare and their application for catalysis of chemical transformations is unexplored. The reason is their easy oxidation or reduction to the more stable gold(III) or gold(I) complexes, respectively. We explored the thermodynamics of the formation of the [(L)AuIIX]+ complexes (L = ligand, X = halogen) from their gold(III) precursors and investigated the stability and the spectral properties in the IR and VIS range of the formed gold(II) complexes in the gas phase. The results show that the best ancillary ligands L for stabilizing gaseous [(L)AuIIX]+ complexes are bidentate and tridentate ligands with nitrogen donor atoms. The electronic structure and spectral properties of the investigated gold(II) complexes were correlated with the quantum chemical calculations. The results show that the molecular and electronic structure of the gold(II) complexes as well as their spectroscopic properties are very similar to the analogous stable copper(II) complexes.

Enantioselective reactions are at the core of chemical synthesis. Their development mostly relies on prior knowledge, laborious product analysis and post-rationalization by theoretical methods. Here, we introduce a simple and fast method to determine enantioselectivities based on mass spectrometry. The method is based on ion mobility separation of diastereomeric intermediates, formed from a chiral catalyst and prochiral reactants, and delayed reactant labeling experiments to link the mass spectra with the reaction kinetics in solution. The data provide rate constants along the reaction paths for the individual diastereomeric intermediates, revealing the origins of enantioselectivity. Using the derived kinetics, the enantioselectivity of the overall reaction can be predicted. Hence, this method can offer a rapid discovery and optimization of enantioselective reactions in the future. We illustrate the method for the addition of cyclopentadiene (CP) to an α, β-unsaturated aldehyde catalyzed by a diarylprolinol silyl ether.

Diaurated intermediates of gold-catalysed reactions have been a long-standing subject of debate. Although diaurated complexes were regarded as a drain of active monoaurated intermediates in catalytic cycles, they were also identified as the products of gold–gold cooperation in dual–activation reactions. This study shows investigation of intermediates in water addition to alkynes catalysed by [(IPr)Au(CH3CN)(BF4)]. Electrospray ionisation mass spectrometry (ESI-MS) allowed us to detect both monoaurated and diaurated complexes in this reaction. Infrared photodissociation spectra of the trapped complexes show that the structure of the intermediates corresponds to α-gold ketone intermediates protonated or aurated at the oxygen atom. Delayed reactant labelling experiments provided the half life of the intermediates in reaction of 1-phenylpropyne (∼7 min) and the kinetic isotope effects for hydrogen introduction to the carbon atom (KIE ∼ 4–6) and for the protodeauration (KIE ∼ 2). The results suggest that the ESI-MS detected monoaurated and diaurated complexes report on species with a very similar or the same kinetics in solution. Kinetic analysis of the overall reaction showed that the reaction rate is first-order dependent on the concentration of the gold catalyst. Finally, all results are consistent with the reaction mechanism proceeding via monoaurated neutral α-gold ketone intermediates only., Reaction kinetics and detected α-gold ketone intermediates reveal that gold-mediated hydration of alkynes does not rely on dual activation.

FeV(O)(OH) species have long been proposed to play a key role in a wide range of biomimetic and enzymatic oxidations, including as intermediates in arene dihydroxylation catalyzed by Rieske oxygenases. However, the inability to accumulate these intermediates in solution has thus far prevented their spectroscopic and chemical characterization. Thus, we use gas-phase ion spectroscopy and reactivity analysis to characterize the highly reactive [FeV(O)(OH)(5tips3tpa)]2+ (32+) complex. The results show that 32+ hydroxylates C–H bonds via a rebound mechanism involving two different ligands at the Fe center and dihydroxylates olefins and arenes. Hence, this study provides a direct evidence of FeV(O)(OH) species in non-heme iron catalysis. Furthermore, the reactivity of 32+ accounts for the unique behavior of Rieske oxygenases. The use of gas-phase ion characterization allows us to address issues related to highly reactive intermediates that other methods are unable to solve in the context of catalysis and enzymology., FeV(O)(OH) species have long been thought to play a role in a range of enzymatic oxidations, but their characterization has remained elusive. Here, using gas-phase ion spectroscopy, the authors characterize an FeV(O)(OH) species and find that its reactivity mimics that of Rieske oxygenases.

The mechanical environment of a cell is not constant. This dynamic behavior is exceedingly difficult to capture in (synthetic) in vitro matrices. This paper describes a novel, highly adaptive hybrid hydrogel composed of magnetically sensitive magnetite nanorods and a stress-responsive synthetic matrix. Nanorod rearrangement after application of (small) magnetic fields induces strain in the network, which results in a strong (over 10-fold) stiffening even at minimal (2.5 wt %) nanorod concentrations. Moreover, the stiffening mechanism yields a fast and fully reversible response. In the manuscript, we quantitatively analyze that forces generated by the particles are comparable to cellular forces. We demonstrate the value of magnetic stiffening in a 3D MCF10A epithelial cell experiment, where simply culturing on top of a permanent magnet gives rise to changes in the cell morphology. This work shows that our hydrogels are uniquely suited as 3D cell culture systems with on-demand adaptive mechanical properties.

Biological materials combine stress relaxation and self-healing with non-linear stress-strain responses. These characteristic features are a direct result of hierarchical self-assembly, which often results in fiber-like architectures. Even though structural knowledge is rapidly increasing, it has remained a challenge to establish relationships between microscopic and macroscopic structure and function. Here, we focus on understanding how network topology determines the viscoelastic properties, i.e., stress relaxation, of biomimetic hydrogels. We have dynamically crosslinked two different synthetic polymers with one and the same crosslink. The first polymer, a polyisocyanopeptide (PIC), self-assembles into semi-flexible, fiber-like bundles, and thus displays stress-stiffening, similar to many biopolymer networks. The second polymer, 4-arm poly(ethylene glycol) (starPEG), serves as a reference network with well-characterized structural and viscoelastic properties. Using one and the same coiled coil crosslink allows us to decouple the effects of crosslink kinetics and network topology on the stress relaxation behavior of the resulting hydrogel networks. We show that the fiber-containing PIC network displays a relaxation time approximately two orders of magnitude slower than the starPEG network. This reveals that crosslink kinetics is not the only determinant for stress relaxation. Instead, we propose that the different network topologies determine the ability of elastically active network chains to relax stress. In the starPEG network, each elastically active chain contains exactly one crosslink. In the absence of entanglements, crosslink dissociation thus relaxes the entire chain. In contrast, each polymer is crosslinked to the fiber bundle in multiple positions in the PIC hydrogel. The dissociation of a single crosslink is thus not sufficient for chain relaxation. This suggests that tuning the number of crosslinks per elastically active chain in combination with crosslink kinetics is a powerful design principle for tuning stress relaxation in polymeric materials. The presence of a higher number of crosslinks per elastically active chain thus yields materials with a slow macroscopic relaxation time but fast dynamics at the microscopic level. Using this principle for the design of synthetic cell culture matrices will yield materials with excellent long-term stability combined with the ability to locally reorganize, thus facilitating cell motility, spreading, and growth. ispartof: FRONTIERS IN CHEMISTRY vol:8 ispartof: location:Switzerland status: published

Leaving groups attached to the meso-methyl position of many common dyes, such as xanthene, BODIPY, or pyronin derivatives, can be liberated upon irradiation with visible light. However, the course of phototransformations of such photoactivatable systems can be quite complex and the identification of reaction intermediates or even products is often neglected. This paper exemplifies the photochemistry of a 9-dithianyl-pyronin derivative, which undergoes an oxidative transformation at the meso-position to give a 3,6-diamino-9H-xanthen-9-one derivative, formic acid, and carbon monoxide as the main photoproducts. The course of this multi-photon multi-step reaction was studied under various conditions by steady-state and time-resolved optical spectroscopy, mass spectrometry and NMR spectroscopy to understand the effects of solvents and molecular oxygen on individual steps. Our analyses have revealed the existence of many intermediates and their interrelationships to provide a complete picture of the transformation, which can bring new inputs to a rational design of new photoactivatable pyronin or xanthene derivatives. Odstupující skupiny připojené k meso-methyl pozici mnoha běžných barviv (např. xanthen, BOPIDY nebo deriváty pyroninu) mohou odstupovat při ozáření viditelným světlem. Nicméně proces fototransformace takových fotoaktivovatelných systémů může být poměrně složitý a tak identifikace reakčních meziproduktů nebo dokonce produktů je často opomíjena. Tato publikace osvětluje fotochemii derivátu 9-dithianylpyroninu, který podléhá oxidativní transformaci na meso-pozici za vzniku 3,6-diamino-9H-xanthen-9-onu, kyseliny mravenčí a oxidu uhelnatého jako hlavních fotoproduktů. Průběh této multifotonové vícestupňové reakce byl studován za různých podmínek optickou spektroskopií v ustáleném a časově rozlišeném spektru, hmotnostní spektrometrií a NMR spektroskopií za účelem pochopení vlivu rozpouštědel a molekulárního kyslíku na jednotlivé kroky. Naše analýzy odhalily existenci mnoha meziproduktů a jejich vztahy poskytují celkový obraz transformace, která může přinést nové informace pro desing nových fotoaktivovatelných derivátů pyroninu a xanthenu.

Iron(IV)‐oxo intermediates in nature contain two unpaired electrons in the Fe–O antibonding orbitals, which are thought to contribute to their high reactivity. To challenge this hypothesis, we designed and synthesized closed‐shell singlet iron(IV) oxo complex [(quinisox)Fe(O)]+ (1+; quinisox‐H=(N‐(2‐(2‐isoxazoline‐3‐yl)phenyl)quinoline‐8‐carboxamide). We identified the quinisox ligand by DFT computational screening out of over 450 candidates. After the ligand synthesis, we detected 1+ in the gas phase and confirmed its spin state by visible and infrared photodissociation spectroscopy (IRPD). The Fe–O stretching frequency in 1+ is 960.5 cm−1, consistent with an Fe–O triple bond, which was also confirmed by multireference calculations. The unprecedented bond strength is accompanied by high gas‐phase reactivity of 1+ in oxygen atom transfer (OAT) and in proton‐coupled electron transfer reactions. This challenges the current view of the spin‐state driven reactivity of the Fe–O complexes., An iron oxo complex with an Fe≡O bond and a closed shell ground state was designed by employing DFT calculations, synthesized, and experimentally characterized by gas‐phase spectroscopic techniques. Despite the unprecedented Fe≡O bond strength and closed‐shell ground state, it still exhibits high‐reactivity.

The mechanism of oxidation of arylamines by copper enzymes is not clarified yet. Here, we explored a reaction between a possible high-valent copper(II)-oxyl intermediate and arylamine. We have employed a TPA ligand (TPA = tris(2-pyridylmethyl)amine) with the NH2 group in position 2 of one of the pyridine rings (TPANH2). This model system allows generation of [(TPANH2)Cu(O)]+ in the gas phase, which immediately undergoes a reaction between the arylamino group and the copper oxyl moiety. The reaction leads to elimination of H2O and formation of a copper–nitrene complex. The structure of the resulting copper–nitrene complex was confirmed by infrared spectroscopy in the gas phase. We show that the copper–nitrene complex reacts by hydrogen atom transfer with 1,4-cyclohexadiene and by an order of magnitude faster by a double hydrogen atom transfer with ethanethiol and methanol. DFT calculations explain the formation of the copper nitrene as well as its reactivity in agreement with the experimental findings.

Development of new reactions requires finding and understanding of novel reaction pathways. In challenging reactions such as C–H activations, these pathways often involve highly reactive intermediates which are the key to our understanding, but difficult to study. Mass spectrometry has a unique sensitivity for detecting low abundant charged species; therefore it is increasingly used for detection of such intermediates in metal catalysed- and organometallic reactions. This perspective shows recent developments in the field of mass spectrometric research of reaction mechanisms with a special focus on going beyond mass-detection. Chapters discuss the advantages of collision-induced dissociation, ion mobility and ion spectroscopy for characterization of structures of the detected intermediates. In addition, we discuss the relationship between the condensed phase chemistry and mass spectrometric detection of species from solution., Modern approaches of mass spectrometry can identify reaction intermediates and provide a unique insight into their structure, properties and kinetics.

The formation and detailed spectroscopic characterization of the first biuret-containing monoanionic superoxido-NiII intermediate [LNiO2 ]- as the Li salt [2; L=MeN[C(=O)NAr)2 ; Ar=2,6-iPr2 C6 H3 )] is reported. It results from oxidation of the corresponding [Li(thf)3 ]2 [LNiII Br2 ] complex M with excess H2 O2 in the presence of Et3 N. The [LNiO2 ]- core of 2 shows an unprecedented nucleophilic reactivity in the oxidative deformylation of aldehydes, in stark contrast to the electrophilic character of the previously reported neutral Nacnac-containing superoxido-NiII complex 1, [L'NiO2 ] (L'=CH(CMeNAr)2 ). According to density-functional theory (DFT) calculations, the remarkably different behaviour of 1 versus 2 can be attributed to their different charges and a two-state reactivity, in which a doublet ground state and a nearby spin-polarized doublet excited-state both contribute in 1 but not in 2. The unexpected nucleophilicity of the superoxido-NiII core of 2 suggests that such a reactivity may also play a role in catalytic cycles of Ni-containing oxygenases and oxidases.

Flavin‐based catalysts are photoactive in the visible range which makes them useful in biology and chemistry. Herein, we present electrospray‐ionization mass‐spectrometry detection of short‐lived intermediates in photooxidation of toluene catalysed by flavinium ions (Fl+). Previous studies have shown that photoexcited flavins react with aromates by proton‐coupled electron transfer (PCET) on the microsecond time scale. For Fl+, PCET leads to FlH.+ with the H‐atom bound to the N5 position. We show that the reaction continues by coupling between FlH.+ and hydroperoxy or benzylperoxy radicals at the C4a position of FlH.+. These results demonstrate that the N5‐blocking effect reported for alkylated flavins is also active after PCET in these photocatalytic reactions. Structures of all intermediates were fully characterised by isotopic labelling and by photodissociation spectroscopy. These tools provide a new way to study reaction intermediates in the sub‐second time range., Active site switch occurred after N5‐hydrogen blocking which resulted from proton coupled electron transfer. The short‐lived peroxy‐flavinium reaction intermediates were characterised by mass spectrometry and ion spectroscopy. Although the effect of N5‐hydrogen blocking was predicted more than 40 years ago, this is the first direct evidence.

Aquest mateix article està publicat a l'edició alemanya d''Angewandte Chemie' (ISSN 0044-8249, EISSN 1521-3757), 2019, vol.131, núm. 28, p. 9721-9726. DOI https://doi.org/10.1002/ange.201904546 Terminal oxo complexes of late transition metals are frequently proposed reactive intermediates. However, they are scarcely known beyond Group 8. Using mass spectrometry, we prepared and characterized two such complexes: [(N4Py)CoIII(O)]+ (1) and [(N4Py)CoIV(O)]2+ (2). Infrared photodissociation spectroscopy revealed that the Co−O bond in 1 is rather strong, in accordance with its lack of chemical reactivity. On the contrary, 2 has a very weak Co−O bond characterized by a stretching frequency of ≤659 cm−1. Accordingly, 2 can abstract hydrogen atoms from non-activated secondary alkanes. Previously, this reactivity has only been observed in the gas phase for small, coordinatively unsaturated metal complexes. Multireference ab-initio calculations suggest that 2, formally a cobalt(IV)-oxo complex, is best described as cobalt(III)-oxyl. Our results provide important data on changes to metal-oxo bonding behind the oxo wall and show that cobalt-oxo complexes are promising targets for developing highly active C−H oxidation catalysts The project was funded by the European Research Council (ERC CoG No. 682275), the Czech Ministry of Education, Youth and Sports (LTAUSA17026), the COST action ECOSTBio, MINECO of Spain (CTQ2015‐70795‐P), the Catalan DIUE of the Generalitat de Catalunya (2017SGR01378, a BFI PhD grant to M.R., and an ICREA‐Academia award), and the Grant Agency of the Czech Republic (Grant No. 18‐13093S)

Despite substantial evidence of short Au⋅⋅⋅H-X contacts derived from a number of X-ray structures of AuI compounds, the nature of AuI ⋅⋅⋅H bonding in these systems has not been clearly understood. Herein, we present the first spectroscopic evidence for an intramolecular AuI ⋅⋅⋅H+ -N hydrogen bond in a [Cl-Au-L]+ complex, where L is a protonated N-heterocyclic carbene. The complex was isolated in the gas phase and characterized with helium-tagging infrared photodissociation (IRPD) spectra, in which H+ -N-mode-derived bands evidence the intramolecular AuI ⋅⋅⋅H+ -N bond. Quantum chemical calculations reproduce the experimental IRPD spectra and allow to characterize the intramolecular Au⋅⋅⋅H+ -N bonding with a short rAu⋅⋅⋅H distance of 2.17 A and an interaction energy of approximately -10 kcal mol-1 . Various theoretical descriptors of chemical bonding calculated for the Au⋅⋅⋅H+ -N interaction provide strong evidence for a hydrogen bond of moderate strength.

The CuO+ core is a central motif of reactive intermediates in copper-catalysed oxidations occurring in nature. The high reactivity of CuO+ stems from a weak bonding between the atoms, which cannot be described by a simple classical model. To obtain the correct picture, we have investigated the acetonitrile-ligated CuO+ ion using neon-tagging photodissociation spectroscopy at 5 K. The spectra feature complex vibronic absorption progressions in NIR and visible regions. Employing Franck-Condon analyses, we derived low-lying triplet potential energy surfaces that were further correlated with multireference calculations. This provided insight into the ground and low-lying excited electronic states of the CuO+ unit and elucidated how these states are perturbed by the change in ligation. Thus, we show that the bare CuO+ ion has prevailingly a copper(I)-biradical oxygen character. Increasing the number of ligands coordinated to copper changes the CuO+ character towards the copper(II)-oxyl radical structure.

Terminal non-heme iron(IV)-oxo compounds are among the most powerful and best studied oxidants of strong C-H bonds. In contrast to the increasing number of such complexes (>80 thus far), corresponding one-electron-reduced derivatives are much rarer and presumably less stable, and only two iron(III)-oxo complexes have been characterized to date, both of which are stabilized by hydrogen-bonding interactions. Herein we have employed gas-phase techniques to generate and identify a series of terminal iron(III)-oxo complexes, all without built-in hydrogen bonding. Some of these complexes exhibit ∼70 cm-1 decrease in ν(Fe-O) frequencies expected for a half-order decrease in bond order upon one-electron reduction to an S = 5/2 center, while others have ν(Fe-O) frequencies essentially unchanged from those of their parent iron(IV)-oxo complexes. The latter result suggests that the added electron does not occupy a d orbital with Fe═O antibonding character, requiring an S = 3/2 spin assignment for the nascent FeIII-O- species. In the latter cases, water is found to hydrogen bond to the FeIII-O- unit, resulting in a change from quartet to sextet spin state. Reactivity studies also demonstrate the extraordinary basicity of these iron(III)-oxo complexes. Our observations show that metal-oxo species at the boundary of the "Oxo Wall" are accessible, and the data provide a lead to detect iron(III)-oxo intermediates in biological and biomimetic reactions.

Cross-coupling transformations are a powerful tool in organic synthesis. It is known that this kind of transformation undergoes 2- electron redox processes, and, for this reason, silver has been nearly forgotten as catalyst for cross-couplings because silver is mainly considered as a 1-electron redox metal. Herein, we disclose effective Ag(I)-catalyzed cross- coupling transformations using bidentate aminoquinoline as a directing group toward different nucleophiles to form C−C, C−N, and C−O bonds. DFT calculations indicate the feasible oxidative addition of L1-I substrate via the Ag(I)/Ag(III) catalytic cycle. Furthermore, ion spectroscopy experiments suggest a highly reactive aryl-Ag(III) that in the absence of nucleophiles reacts to form an intermolecular cyclic product [5d-Ag(I)-CH3CN], which in solution forms 5a. This work proves that silver can undergo 2-electron redox processes in cross-coupling reactions like Pd and Cu.

Reactivities of non‐heme iron(IV)‐oxo complexes are mostly controlled by the ligands. Complexes with tetradentate ligands such as [(TPA)FeO]2+ (TPA=tris(2‐pyridylmethyl)amine) belong to the most reactive ones. Here, we show a fine‐tuning of the reactivity of [(TPA)FeO]2+ by an additional ligand X (X=CH3CN, CF3SO3 −, ArI, and ArIO; ArI=2‐(tBuSO2)C6H4I) attached in solution and reveal a thus far unknown role of the ArIO oxidant. The HAT reactivity of [(TPA)FeO(X)]+/2+ decreases in the order of X: ArIO > MeCN > ArI ≈ TfO−. Hence, ArIO is not just a mere oxidant of the iron(II) complex, but it can also increase the reactivity of the iron(IV)‐oxo complex as a labile ligand. The detected HAT reactivities of the [(TPA)FeO(X)]+/2+ complexes correlate with the Fe=O and FeO−H stretching vibrations of the reactants and the respective products as determined by infrared photodissociation spectroscopy. Hence, the most reactive [(TPA)FeO(ArIO)]2+ adduct in the series has the weakest Fe=O bond and forms the strongest FeO−H bond in the HAT reaction., The reaction kinetics of H‐atom transfer mediated by iron(IV)oxo complexes with different cis‐ligands can be studied in a modular flow reactor coupled to MS detection. The HAT reactivity correlates with the intrinsic properties of the isolated complexes in the gas phase. A ligand with a larger binding energy forms a more reactive complex for the HAT reactions, has a weaker FeIV=O bond, and forms a stronger FeIIIO−H bond after the HAT reaction.

Although common in biology, controlled stiffening of hydrogels in vitro is difficult to achieve; the required stimuli are commonly large and/or the stiffening amplitudes small. Here, we describe the hierarchical mechanics of ultra-responsive hybrid hydrogels composed of two synthetic networks, one semi-flexible and stress-responsive, the other flexible and thermoresponsive. Heating collapses the flexible network, which generates internal stress that causes the hybrid gel to stiffen up to 50 times its original modulus; an effect that is instantaneous and fully reversible. The average generated forces amount to ~1 pN per network fibre, which are similar to values found for stiffening resulting from myosin molecular motors in actin. The excellent control, reversible nature and large response gives access to many biological and bio-like applications, including tissue engineering with truly dynamic mechanics and life-like matter., Although common in biology, controlled stiffening of hydrogels in vitro is difficult to achieve. Here the authors show how a biomimetic hybrid hydrogel can be stiffened instantaneously and reversibly up to 50 times.