Search

The experimental data of vapor–liquid equilibrium for the binary systems methyl acetate + 1–propanol, methyl acetate + 1–butanol and ethyl acetate + 1–propanol at 1.5 MPa has been obtained, using an ebulliometer made of stainless steel. This equipment works through the Cottrell pump effect, so that the liquid and vapor phases are recirculated. The isobaric data T–x–y are informed and analyzed with respect to the literature data. The evolution of the azeotropic point with the pressure in the binary system of ethyl acetate + 1–propanol is included. The thermodynamic consistency of the systems was verified by employing the Peng–Robinson equation of state in different forms and using the φ–φ approach.

The vapor–liquid equilibrium of binary mixtures of propyl acetate, butyl acetate and isobutyl acetate with methanol has been determined at a constant pressure of 0.6 MPa. Results have been modeled with the Peng–Robinson equation, a traditional cubic equation of state widely employed in chemical industries, as well as with the perturbed-chain statistical associating fluid PC-SAFT theory of Gross–Sadowski. By correlation of the binary interaction parameters of these equations, the measured vapor–liquid equilibrium data can be accurately predicted. Thus, this work shows that these models are able to represent the experimental data for systems with associating compounds via hydrogen bonding.

We report viscosities of liquid hexadecane measured at temperatures between 323 K and 673 K and at pressures up to 4.0 MPa. This study significantly extends the temperature range over which viscosity data for hexadecane are available. The experiments were carried out using a dual-capillary viscometer that measures the ratio of the viscosity at the temperature in question to that at a reference temperature, 298.15 K in this work, at which the viscosity is well known. Absolute viscosities were then obtained with an estimated expanded relative uncertainty of about 3% at 95% confidence. An empirical function was developed to correlate the viscosity ratio with the density ratio and this fitted the experimental data within about 1%. The results were found to agree well with the existing literature data.

Vapor–liquid equilibrium data for the binary systems methyl acetate + 2-butanol and ethyl acetate+2-butanol, have been determined at 1.5 MPa employing a metal ebulliometer with recirculation of both phases. The thermodynamic consistency of experimental data has been verified with the Van Ness point-to-point test, using the routine in Fortran proposed by Fredenslund et al. in which the second and third virial coefficients were calculated using the Tsonopoulos method and the Orbey and Vera procedure, respectively. Different group contribution models were employed for prediction of high pressure data. The UNIFAC–Lyngby model returned good overall predictions. The ϕ–ϕ approach was applied using the perturbed-chain statistical associating fluid theory model. This equation of state produces an acceptable agreement between experimental and calculated data in both systems.

Isobaric vapor–liquid equilibrium data for the binary systems methyl acetate + 2-propanol and ethyl acetate + 2-propanol at 1.5 MPa were obtained. The data quality was verified by using the point-to-point test of Van Ness and the Fortran routine of Fredenslund et al., which was implemented to third virial coefficient using the method of Orbey and Vera. Experimental data satisfied the validation criterion of Fredenslund et al. The azeotropic point of ethyl acetate + 2-propanol was not found at 1.5 MPa. The ASOG low pressure group contribution models and different versions of UNIFAC were employed for the verification of high pressure vapor–liquid equilibrium data predictions. The ϕ – ϕ approach was applied by using the Peng–Robinson equation of state and employing quadratic mixing rules. The UNIFAC-Lyngby model returned good overall predictions; however the modeling for both systems was best when the Peng–Robinson equation of state was applied.

Isobaric vapor–liquid equilibria for the binary system methyl acetate + 2-butanol at 0.3 MPa and 0.6 MPa and ethyl acetate + 2-butanol at 0.3 MPa and 0.6 MPa have been determined. Thermodynamic consistency was checked. The Redlich–Kister and Herington area tests were employed. The Point test, Area test and Infinite dilution test (PAI) of Kojima et al. and the point-to-point test of Van Ness et al. were also applied. The different criteria for validation were considered, and all systems showed an acceptable quality. The results of global and individual deviations on experimental data calculated by using the Fredenslund et al. routine are shown. The different versions of the unique functional group activity coefficient (UNIFAC) and analytical solution of groups (ASOG) predictive group contribution models were applied. The experimental data were also correlated with the Peng–Robinson equation applying quadratic mixing rules.

Data from isobaric vapor–liquid equilibrium (VLE) for the binary systems methyl acetate, ethyl acetate, and n-propyl acetate with 1-propanol have been determined at 0.6 MPa employing a metal ebulliometer with recirculation of both phases. The thermodynamic consistency of experimental data has been verified with the Van Ness point-to-point test, using the routine in Fortran proposed by Fredenslund et al. The azeotropic point was observed for the binary systems ethyl acetate/1-propanol and propyl acetate/1-propanol. The activity coefficients of the liquid phase were calculated by considering the nonideality of the vapor phase. The binary systems studied show positive deviation from ideal behavior. Predictions obtained from the group contribution models ASOG and different versions of UNIFAC were verified by comparing the values provided by the models with experimental data of VLE.