Search

The growing demand for complex three-dimensional (3D) micro-/nanostructures has inspired the development of the corresponding manufacturing techniques. Among these techniques, 3D fabrication based on mechanically guided assembly offers the advantages of broad material compatibility, high designability, and structural reversibility under strain but is not applicable for nanoscale device printing because of the bottleneck at nanofabrication and design technique. Herein, a configuration-designable nanoscale 3D fabrication is suggested through a robust nanotransfer methodology and design of substrate’s mechanical characteristics. Covalent bonding–based two-dimensional nanotransfer allowing for nanostructure printing on elastomer substrates is used to address fabrication problems, while the feasibility of configuration design through the modulation of substrate’s mechanical characteristics is examined using analytical calculations and numerical simulations, allowing printing of various 3D nanostructures. The printed nanostructures exhibit strain-independent electrical properties and are therefore used to fabricate stretchable H2 and NO2 sensors with high performances stable under external strains of 30%.

The sea cucumber evolved to bear mutable collagenous tissue (MCT) that enables its elastic modulus to change by a factor of 10 within a few seconds. It does this by controlling the amount of chemical regulator released, which can subsequently form or break hydrogen bonds within the MCT. Although existing water-driven, self-operating, soft actuators have great potential for soft robotics, they remain fragile and slow; ergo, their range of application remains modest. Inspired by MCT, we introduce a programmable, powerful, and ultra-fast water-driven self-operating soft actuator exerting an actuation force of approximately 2 N with an actuation speed of approximately 3 s−1 in 80 °C water based on the dramatic stiffness alteration of bulk poly(N-isopropylacrylamide) hydrogel. This actuator also exhibits outstanding robustness by preserving its original shape over multiple cycles of highly strained (300%) actuations under harsh environments. A simple modulation of cross-linker concentration with its dimensional adjustment enabled the precise tuning of not only the actuation force but also the actuation speed in a wide range. Thus, the soft robotic gripper was able to perform a myriad of intricate tasks such as capturing a fragile object, acting as a biomedical appliance, and closing a large wound with uniform appropriate forces.

Repositioning is a common guideline for the prevention of pressure injuries of bedridden or wheelchair patients. However, frequent repositioning could deteriorate the quality of patient's life and induce secondary injuries. This paper introduces a method for continuous multi-site monitoring of pressure and temperature distribution from strategically deployed sensor arrays at skin interfaces via battery-free, wireless ionic liquid pressure sensors. The wirelessly delivered power enables stable operation of the ionic liquid pressure sensor, which shows enhanced sensitivity, negligible hysteresis, high linearity and cyclic stability over relevant pressure range. The experimental investigations of the wireless devices, verified by numerical simulation of the key responses, support capabilities for real-time, continuous, long-term monitoring of the pressure and temperature distribution from multiple sensor arrays. Clinical trials on two hemiplegic patients confined on bed or wheelchair integrated with the system demonstrate the feasibility of sensor arrays for a decrease in pressure and temperature distribution under minimal repositioning.

Capabilities for continuous monitoring of pressures and temperatures at critical skin interfaces can help to guide care strategies that minimize the potential for pressure injuries in hospitalized patients or in individuals confined to the bed. This paper introduces a soft, skin-mountable class of sensor system for this purpose. The design includes a pressure-responsive element based on membrane deflection and a battery-free, wireless mode of operation capable of multi-site measurements at strategic locations across the body. Such devices yield continuous, simultaneous readings of pressure and temperature in a sequential readout scheme from a pair of primary antennas mounted under the bedding and connected to a wireless reader and a multiplexer located at the bedside. Experimental evaluation of the sensor and the complete system includes benchtop measurements and numerical simulations of the key features. Clinical trials involving two hemiplegic patients and a tetraplegic patient demonstrate the feasibility, functionality and long-term stability of this technology in operating hospital settings.

Capabilities for continuous monitoring of pressures and temperatures at critical skin interfaces can help to guide care strategies that minimize the potential for pressure injuries in hospitalized patients or in individuals confined to the bed. This paper introduces a soft, skin-mountable class of sensor system for this purpose. The design includes a pressure-responsive element based on membrane deflection and a battery-free, wireless mode of operation capable of multi-site measurements at strategic locations across the body. Such devices yield continuous, simultaneous readings of pressure and temperature in a sequential readout scheme from a pair of primary antennas mounted under the bedding and connected to a wireless reader and a multiplexer located at the bedside. Experimental evaluation of the sensor and the complete system includes benchtop measurements and numerical simulations of the key features. Clinical trials involving two hemiplegic patients and a tetraplegic patient demonstrate the feasibility, functionality and long-term stability of this technology in operating hospital settings., Uninterrupted monitoring of pressure and temperature at skin interfaces can help to minimize the potential for pressure injuries in hospitalized or bedridden patients. Here, the authors introduce a soft, skin-mountable sensor that can continuously provide readings via antennas mounted under bedding, and demonstrate the functionality and robustness of the devices on patients.