Search

The first structurally characterized example of a trioxaborinanone (

A novel process is described for the synthesis of di- and trisubstituted cyclohexenes from an arene. These compounds are prepared from three independent nucleophilic addition reactions to a phenyl sulfone (PhSO(2)R; R = Me, Ph, NC(4)H(8)) dihapto-coordinated to the tungsten complex {WTp(NO)(PMe(3))}(Tp = trispyrazolylborate). Such coordination renders the dearomatized aryl ring susceptible to protonation at a carbon ortho to the sulfone group. The resulting arenium species readily reacts with the first nucleophile to form a dihapto-coordinated sulfonylated diene complex. This complex can again be protonated, and subsequent nucleophilic addition forms a trisubstituted cyclohexene species bearing a sulfonyl group at an allylic position. Loss of the sulfinate anion forms a π-allyl species, to which a third nucleophile can be added. The trisubstituted cyclohexene can then be oxidatively decomplexed, either before or after substitution of the sulfonyl group. Nucleophiles employed include masked enolates, cyanide, amines, amides, and hydride, with all three additions occurring to the same face of the ring, anti to the metal. Of the twelve novel functionalized cyclohexenes prepared as examples of this methodology, nine compounds meet five independent criteria for evaluating drug likeliness. Structural assignments are supported with nine crystal structures, DFT studies, and full 2D NMR analysis.

The catalytic partial oxidation of methane is achieved at low temperatures (90% at ∼35% methane conversion at approximately 6 turnovers. Under our catalytic methane oxidation reaction conditions, MeTFA is stable against overoxidation, which explains the likely high selectivity at conversions >15%. Using combined experimental studies and DFT calculations, a mechanism involving soluble and molecular Mn species in the catalytic cycle is proposed. The proposed reaction pathway involves initial activation of Mnᴵᴵ by dioxygen, cleavage of a methane C–H bond by a Mnᴵᴵᴵ hydroxo intermediate, rebound of the methyl radical to generate MeTFA, and finally regeneration of the starting MnII complex. Also, this process is shown to be applicable to the oxidation of ethane, favoring the mono-oxidized product ethyl trifluoroacetate (EtTFA) and reaching ∼46% conversion.

The use of sulfone-based redox mediators in electrocatalytic CO2 reduction by Cr-centered complexes enhances the turnover frequencies at lower overpotentials via inner-sphere electron transfer and pancake bonding.

We report the synthesis, characterization, and electrocatalytic water oxidation activity of two cobalt complexes, (6-FP)Co(NO₃)₂ (1) (6-FP = 8,8′-(1,2-phenylene)diquinoline) and (5-FP)Co(NO₃)₂ (2) (5-FP = 1,2-bis(N-7-azaindolyl)benzene), containing “capping arene” bidentate ligands with nitrogen atom donors. The cobalt complexes 1 and 2 were supported on ordered mesoporous carbon (OMC) by π–π stacking, resulting in heterogenized cobalt materials 6-FP-Co-OMC-1 and 5-FP-Co-OMC-2, respectively, and studied for electrocatalytic water oxidation. We find that 6-FP-Co-OMC-1 exhibits an overpotential of 355 mV for a current density of 10 mA cm⁻² and a turnover frequency (TOF) of ∼0.53 s–1 at an overpotential of 400 mV at pH 14. 6-FP-Co-OMC-1 exhibits activity that is ∼1.6 times that of 5-FP-Co-OMC-2, which gives a TOF of 0.32 s⁻¹ at 400 mV overpotential. The structural stability of the single-atom Co site was demonstrated for 6-FP-Co-OMC-1 using X-ray absorption spectroscopy for the molecular complex supported on OMC, but slow degradation in catalyst activity can be attributed to eventual formation of Co oxide clusters. DFT computations of electrocatalytic water oxidation using the molecular complexes as models provide a description of the catalytic mechanism. These studies reveal that the mechanism for O–O bond formation involves an intermediate Coᴵⱽ oxo complex that undergoes an intramolecular reductive O–O coupling to form a Coᴵᴵ–OOH species. Further, the calculations predict that the molecular 6-FP-Co structure is more active for electrocatalytic water oxidation than 5-FP-Co, which is consistent with experimental studies of 6-FP-Co-OMC-1 and 5-FP-Co-OMC-2, highlighting the possibility that the ligand structure influences the catalytic activity of the supported molecular catalysts.

Generally, cobalt-N(2)O(2) complexes show selectivity for hydrogen peroxide during electrochemical dioxygen (O(2)) reduction. We recently reported a Co(III)-N(2)O(2) complex with a 2,2′-bipyridine-based ligand backbone which showed alternative selectivity: H(2)O was observed as the primary reduction product from O(2) (71±5%) using decamethylferrocene as a chemical reductant and acetic acid as a proton donor in methanol solution. We hypothesized that the key selectivity difference in this case arises in part from increased favorability of protonation at the distal O position of the key intermediate Co(III)-hydroperoxide species. To interrogate this hypothesis, we have prepared a new Co(III) compound with which contains pendent –OMe groups poised to direct protonation towards the proximal O atom of this hydroperoxo intermediate. Mechanistic studies in acetonitrile (MeCN) solution reveal two regimes are possible in the catalytic response, dependent on added acid strength and the presence of the pendent proton donor relay. In the presence of stronger acids, the activity of the complex containing pendent relays becomes O(2) dependent, implying a shift to Co(III)-superoxide protonation as the rate-determining step. Interestingly, the inclusion of the relay results in primarily H(2)O(2) production in MeCN, despite minimal difference between the standard reduction potentials of the three complexes tested. EPR spectroscopic studies indicate the formation of Co(III)-superoxide species in the presence of exogenous base, with greater O(2) reactivity observed in the presence of the pendent –OMe groups.

A combined synthetic and theoretical investigation of N-heterocyclic carbene (NHC) adducts of magnesium amidoboranes is presented, which involves a rare example of reversible migratory insertion within a normal valent s-block element. The reaction of (NHC)Mg(N(SiMe

Two-electron reduction of carbene-supported 9-bromo-9-borafluorenes with excess KC8 , Na, or Li-naphthalenide affords six N-heterocyclic carbene (NHC)- or cyclic(alkyl)(amino) carbene (CAAC)-stabilized borafluorene anions (3-8)-the first isolated and structurally authenticated examples of the elusive 9-carbene-9-borafluorene monoanion. The electronic structure, bonding, and aromaticity of the boracyclic anions were comprehensively investigated via computational studies. Compounds 5 and 8 react with metal halides via salt elimination to give new B-E (E=Au, Se, Ge)-containing materials (9-12). Upon reaction with diketones, the carbene ligand cleanly dissociates from 5 or 8 to yield new B-O containing spirocycles (13-14) that cannot be easily obtained using "normal" valent borafluorene compounds. Collectively, these results support the notion that carbene-stabilized monoanionic borafluorenes may serve as a new platform for the one-step construction of higher-value boracyclic materials.

We report a combined experimental and computational study focused on the mechanism of oxidative conversion of benzene and ethylene to styrene using [(η2-C2H4)2Rh(μ-OAc)]2 as the catalyst precursor ...

A common feature of d- and p-block elements is that they participate in multiple bonding. In contrast, the synthesis of compounds containing homo- or hetero-nuclear multiple bonds involving s-block elements is extremely rare. Herein, we report the synthesis, molecular structure, and computational analysis of a beryllium imido (Be=N) complex (2), which was prepared via oxidation of a molecular Be0 precursor (1) with trimethylsilyl azide Me3 SiN3 (TMS-N3 ). Notably, compound 2 features the shortest known Be=N bond (1.464 A) to date. This represents the first compound with an s-block metal-nitrogen multiple bond. All compounds were characterized experimentally with multi-nuclear NMR spectroscopy (1 H, 13 C, 9 Be) and single-crystal X-ray diffraction studies. The bonding situation was analyzed with density functional theory (DFT) calculations, which supports the existence of π-bonding between beryllium and nitrogen.

Organometallic gold complexes are used in a range of catalytic reactions, and they often serve as catalyst precursors that mediate C–C bond formation. In this study, we investigate C–C coupling to form ethane from various phosphine-ligated gem-digold(I) methyl complexes including [Au2(μ-CH3)(PMe2Ar′)2][NTf2], [Au2(μ-CH3)(XPhos)2][NTf2], and [Au2(μ-CH3)(tBuXPhos)2][NTf2] {Ar′ = C6H3-2,6-(C6H3-2,6-Me)2, C6H3-2,6-(C6H2-2,4,6-Me)2, C6H3-2,6-(C6H3-2,6-iPr)2, or C6H3-2,6-(C6H2-2,4,6-iPr)2; XPhos = 2-dicyclohexylphosphino-2′,4′,6′-triisopropylbiphenyl; tBuXPhos = 2-di-tert-butylphosphino-2′,4′,6′-triisopropylbiphenyl; NTf2 = bis(trifluoromethyl sulfonylimide)}. The gem-digold methyl complexes are synthesized through reaction between Au(CH3)L and Au(L)(NTf2) {L = phosphines listed above}. For [Au2(μ-CH3)(XPhos)2][NTf2] and [Au2(μ-CH3)(tBuXPhos)2][NTf2], solid-state X-ray structures have been elucidated. The rate of ethane formation from [Au2(μ-CH3)(PMe2Ar′)2][NTf2] increases as the steric bulk of the phosphine substituent Ar′ decreases. Monitoring the rate of ethane elimination reactions by multinuclear NMR spectroscopy provides evidence for a second-order dependence on the gem-digold methyl complexes. Using experimental and computational evidence, it is proposed that the mechanism of C–C coupling likely involves (1) cleavage of [Au2(μ-CH3)(PMe2Ar′)2][NTf2] to form Au(PR2Ar′)(NTf2) and Au(CH3)(PMe2Ar′), (2) phosphine migration from a second equivalent of [Au2(μ-CH3)(PMe2Ar′)2][NTf2] aided by binding of the Lewis acidic [Au(PMe2Ar′)]+, formed in step 1, to produce [Au2(CH3)(PMe2Ar′)][NTf2] and [Au2(PMe2Ar′)]+, and (3) recombination of [Au2(CH3)(PMe2Ar′)][NTf2] and Au(CH3)(PMe2Ar′) to eliminate ethane.

We report a Co-based complex for the reduction of O2 to H2O utilizing decamethylferrocene as chemical reductant and acetic acid as a proton donor in methanol solution. Despite structural similarities to previously reported Co(N2O2) complexes capable of catalytic O2 reduction, this system shows selectivity for the four-electron/four-proton reduction product, H2O, instead of the two-electron/two-proton reduction product, H2O2. Mechanistic studies show that the overall rate law is analogous to previous examples, suggesting that the key selectivity difference arises in part from increased favorability of protonation at the distal O position of the key intermediate Co(III)-hydroperoxide, instead of the proximal one. Interestingly, no product selectivity dependence is observed with respect to the presence of pyridine, which is proposed to bind trans to O2 during catalysis.

The mono- and dianions of CO2 (i.e., CO2− and CO22−) have been studied for decades as both fundamentally important oxycarbanions (anions containing only C and O atoms) and as critical species in CO2 reduction and fixation chemistry. However, CO2 anions are highly unstable and difficult to study. As such, examples of stable compounds containing these ions are extremely limited; the unadulterated alkali salts of CO2 (i.e., MCO2, M2CO2, M = alkali metal) decompose rapidly above 15 K, for example. Herein we report the chemical reduction of a cyclic (alkyl)(amino) carbene (CAAC) adduct of CO2 at room temperature by alkali metals, which results in the formation of CAAC-stabilized alkali CO2− and CO22− clusters. One-electron reduction of CAAC–CO2 adduct (1) with lithium, sodium or potassium metal yields stable monoanionic radicals [M(CAAC–CO2)]n (M = Li, Na, K, 2–4) analogous to the alkali CO2− radical, and two-electron alkali metal reduction affords dianionic clusters of the general formula [M2(CAAC–CO2)]n (5–8) with reduced CO2 units which are structurally analogous to the carbonite anion CO22−. It is notable that crystalline clusters of these alkali–CO2 salts may also be isolated via the “one-pot” reaction of free CO2 with free CAAC followed by the addition of alkali metals – a process which does not occur in the absence of carbene. Each of the products 2–8 was investigated using a combination of experimental and theoretical methods.

Charge-separated metal-organic frameworks (MOFs) are a unique class of MOFs that can possess added properties originating from the exposed ionic species. A new charge-separated MOF, namely, UNM-6 synthesized from a tetrahedral borate ligand and Co2+ cation is reported herein. UNM-6 crystalizes into the highly symmetric P43n space group with fourfold interpenetration, despite the stoichiometric imbalance between the B and Co atoms, which also leads to loosely bound NO3 - anions within the crystal structure. These NO3 - ions can be quantitatively exchanged with various other anions, leading to Lewis acid (Co2+ ) and Lewis base (anions) pairs within the pores and potentially cooperative catalytic activities. For example, UNM-6-Br, the MOF after anion exchange with Br- anions, displays high catalytic activity and stability in reactions of CO2 chemical fixation into cyclic carbonates.

Key steps in the functionalization of an unactivated arene often involve its dihaptocoordination by a transition metal followed by insertion into the C-H bond. However, rarely are the η2-arene and aryl hydride species in measurable equilibrium. In this study, the benzene/phenyl hydride equilibrium is explored for the {WTp(NO)(PBu3)} (Bu = n-butyl; Tp = trispyrazoylborate) system as a function of temperature, solvent, ancillary ligand, and arene substituent. Both face-flip and ring-walk isomerizations are identified through spin-saturation exchange measurements, which both appear to operate through scission of a C-H bond. The effect of either an electron-donating or electron-withdrawing substituent is to increase the stability of both arene and aryl hydride isomers. Crystal structures, electrochemical measurements, and extensive NMR data further support these findings. Static density functional theory calculations of the benzene-to-phenyl hydride landscape suggest a single linear sequence for this transformation involving a sigma complex and oxidative cleavage transition state. Static DFT calculations also identified an η2-coordinated benzene complex in which the arene is held more loosely than in the ground state, primarily through dispersion forces. Although a single reaction pathway was identified by static calculations, quasiclassical direct dynamics simulations identified a network of several reaction pathways connecting the η2-benzene and phenyl hydride isomers, due to the relatively flat energy landscape.

Catenation is common for the light main-group elements whereas it is rare for the heavy elements. Herein, we report the first example of a neutral molecule containing a Bi4 chain. It is prepared in a one-step reaction between bismuth trichloride and bis(diisopropylphosphino)amine in methanol suspension. The same reaction carried out in dichloromethane gives quite different products. All products have been characterized spectroscopically and using single-crystal X-ray analysis.

Interest in beryllium, the lightest member of group 2 elements, has grown substantially within the synthetic community. Herein, we report the synthesis and crystal structure of a heteroleptic haloberyllium borohydride bis(1-isopropyl-3-methyl-benzimidazol-2-ylidene)methane ‘carbodicarbene’ (CDC) complex [(CDC)BeCl(BH4)]. Crystallographic data: Triclinic space group P1̅, a = 8.8695(14), b = 12.394(2), c = 16.844(3) Å, α = 102.395(4), β = 96.456(4), γ = 99.164(4)°, wR2 (all data) = 0.2706 for 6720 unique data and 357 refined parameters.

The alkaline-earth elements (Be, Mg, Ca, Sr, and Ba) strongly favor the formation of diamagnetic compounds in the +2 oxidation state. Herein we report a paramagnetic beryllium radical cation, [(CAA...

The synthesis and reactivity study of the first isolable boraphosphaketene, cyclic(alkyl)(amino) carbene (CAAC)-borafluorene-P=C=O (2), is described. Photolysis of compound 2 results in the formation of CAAC-stabilized BP-doped phenanthryne (3) through tandem decarbonylation, monoatomic phosphide insertion, and ring-expansion. Notably, while BN-doped phenanthryne was previously discussed as a reactive intermediate which could not be isolated, the heavier BP-doped analogue exhibits remarkable solution and solid-state stability. The reactivity of 2 with stable carbenes was also explored. Addition of CAAC to 2 led to migration of the original CAAC ligand from boron to phosphorus and coordination of the added CAAC to carbon, affording compound 4. Reaction of 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (NHC) with 2 resulted in N-C bond activation to give the unusual spiro-heterocyclic compound (5).

Metal–organic frameworks (MOFs) are an emerging class of microporous materials that have potential applications in a wide range of areas. As a subclass of MOFs, ionic MOFs, especially charge-separa...

The reactivity of the terminal zirconium(iv) oxo complex, O Created by potrace 1.16, written by Peter Selinger 2001-2019 Zr(MesNPiPr2)3CoCNtBu (2), is explored, revealing unique redox activity imparted by the pendent redox active cobalt(i) center. Oxo complex 2 can be chemically reduced using Na/Hg or Ph3C• to afford the ZrIV/Co0 complexes [(μ-Na)OZr(MesNPiPr2)3CoCNtBu]2 (3) and Ph3COZr(MesNPiPr2)3CoCNtBu (4), respectively. Based on the cyclic voltammogram of 2, Ph3˙ should not be sufficiently reducing to achieve the chemical reduction of 2, but sufficient driving force for the reaction is provided by the nucleophilicity of the terminal oxo fragment and its affinity to bind Ph3C+. Accordingly, 2 reacts readily with [Ph3C][BPh4] and Ph3CCl to afford [Ph3COZr(MesNPiPr2)3CoCNtBu][BPh4] ([5][BPh4]) and Ph3COZr(MesNPiPr2)3CoCl (6), respectively. The chemical oxidation of 2 is also investigated, revealing that oxidation of 2 is accompanied by immediate hydrogen atom abstraction to afford the hydroxide complex [HOZr(MesNPiPr2)3CoCNtBu]+ ([9]+). Thus it is posited that the transient [OZr(MesNPiPr2)3CoCNtBu]+ [2]+ cation generated upon oxidation combines the basicity of a nucleophilic early metal oxo fragment with the oxidizing power of the appended cobalt center to facilitate H-atom abstraction., Bimetallic cooperativity is demonstrated with a Co/Zr complex featuring both nucleophilic Zr(iv) oxo and redox active Co sites.

Borenium ions, originally synthesized as fundamentally important laboratory curiosities, have attracted significant attention due to their applications in catalysis and frustrated Lewis pair chemistry. However, investigations of the materials properties of these types of compounds are exceptionally rare. Herein, we report the synthesis, molecular structures, and optical properties of a new class of air-stable borenium ions, stabilized by the strongly donating carbodicarbene (CDC) ligand (

Borepin, a 7-membered boron-containing heterocycle, has become an emerging molecular platform for the development of new materials and optoelectronics. While electron-deficient borepins are well-established, reduced electron-rich species have remained elusive. Herein we report the first isolable, crystalline borepin radical (2 a, 2 b) and anion (3 a, 3 b) complexes, which have been synthesized by potassium graphite (KC8) reduction of cyclic(alkyl)(amino) carbene-dibenzo[b,d]borepin precursors. Borepin radicals and anions have been characterized by EPR or NMR, elemental analysis, X-ray crystallography, and cyclic voltammetry. In addition, the bonding features have been investigated computationally using density functional theory.

We report a bioinspired non-heme Fe complex with a tripodal [N3O]- ligand framework (Fe(PMG)(Cl)2) that is electrocatalytically active toward dioxygen reduction with acetic acid as a proton source in acetonitrile solution. Under electrochemical and chemical conditions, Fe(PMG)(Cl)2 selectively produces water via a 2+2 mechanism, where H2O2 is generated as a discrete intermediate species before further reduction to two equivalents of H2O. Mechanistic studies support a catalytic cycle for dioxygen reduction where an off-cycle peroxo dimer species is the resting state of the catalyst. Spectroscopic analysis of the reduced complex FeII(PMG)Cl shows the stoichiometric formation of an Fe(III)-hydroxide species following exposure to H2O2; no catalytic activity for H2O2 disproportionation is observed, although the complex is electrochemically active for H2O2 reduction to H2O. Electrochemical studies, spectrochemical experiments, and DFT calculations suggest that the carboxylate moiety of the ligand is sensitive to hydrogen-bonding interactions with the acetic acid proton donor upon reduction from Fe(III)/(II), favoring chloride loss trans to the tris-alkyl amine moiety of the ligand framework. These results offer insight into how mononuclear non-heme Fe active sites in metalloproteins distribute added charge and poise proton donors during reactions with dioxygen.

Earth-abundant transition-metal catalysts capable of reducing CO2 to useful products have been gaining attention to meet increasing energy demands and address concerns of rising CO2 emissions. Grou...

The preparation of the complex MoTp(NO)(DMAP)(4,5-η2-(2-trifluoromethyl)pyridine) (DMAP = 4-(dimethylamino)pyridine; Tp = tris(pyrazolyl)borate) is described. The CF3 substituent is found to preclude κ-N coordination, allowing for direct coordination without protection of the nitrogen. The dihapto-coordinate complex can be isolated as a single diastereomer, methylated, and reacted with a range of nucleophiles. Oxidative decomplexation affords the free dihydropyridines in good yield (75-90%). As a demonstration of synthetic utility, a series of novel bridgehead CF3-substituted isoquinuclidines was prepared from these decomplexed dihydropyridines.

An oxidant-initiated, substitution process for dihapto-coordinated ligands is described for the {MoTp(NO)(DMAP)} system. Complexes of the form MoTp(NO)(DMAP)(η2-alkene), MoTp(NO)(DMAP)(η2-ketone), ...

The first examples of N-heterocyclic carbene (NHC) and cyclic(alkyl)(amino) carbene (CAAC) stabilized borepinium and borafluorenium heterocycles are reported herein. The optical properties of the heterocyclic borenium cations were tuned by varying the Lewis base and by changing the number of atoms in the ring. More importantly, functionalizing the cationic boron ring system in the NHC-borafluorenium cation affords a temperature-sensitive molecule with reversible colorimetric "turn off/turn on" properties in solution. Notably, this is the first report of thermochromism in these cationic species. This property, which is mediated by an intermolecular boron-oxygen bond equilibrium, was examined in detail by X-ray crystallography, variable temperature-UV/Vis absorption spectroscopy (VT-UV/Vis), and density functional theory (DFT).

Studies of catalytic benzene alkenylation using different diimine ligated Rh(I) acetate complexes and Cu(OAc)2 as the oxidant revealed statistically identical results in terms of activity and product selectivity. Under ethylene pressure, two representative diimine ligated rhodium(I) acetate complexes were demonstrated to exchange the diimine ligand with ethylene rapidly to form [Rh(μ-OAc)(η2-C2H4)2]2 and free diimine. Thus, it was concluded that diimine ligands are not likely coordinated to the active Rh catalysts under catalytic conditions. At 150 °C under catalytic conditions using commercial Cu(OAc)2 as the oxidant, [Rh(μ-OAc)(η2-C2H4)2]2 undergoes rapid decomposition to form catalytically inactive and insoluble Rh species, followed by gradual dissolution of the insoluble Rh to form the soluble Rh, which is active for styrene production. Thus, the observed induction period under some conditions is likely due to the formation of insoluble Rh (rapid), followed by redissolution of the Rh (slow). The Rh de...

Oxygen reduction is a critical half reaction in renewable fuel cell development and a key step in the development of aerobic oxidation reactions. Herein, we report rapid two-electron O2 reduction by a d0 ZrIV center with an appended redox-active Co-I site serving as an electron reservoir. The early/late heterobimetallic Zr/Co complex (THF)Zr(MesNP iPr2)3CoCN tBu (1) reacts readily with O2 and O atom transfer reagents to generate reactive oxygenated species including terminal peroxo and oxo complexes, (O2)Zr(MesNP iPr2)3CoCN tBu (2) and O≡Zr(MesNP iPr2)3CoCN tBu (3). The bimetallic Zr/Co complex provides a new cooperative synthetic pathway to promote multielectron redox processes such as oxygen reduction, with each metal playing a distinct role as a substrate binding site or redox mediator.

Carbenes are known to activate carbon dioxide to form zwitterionic adducts. Their inherent metal-free redox activity remains understudied. Herein, we demonstrate that zwitterionic adducts of carbon dioxide formed with cyclic(alkyl)(amino) carbenes are not only redox active, but they can mediate the stoichiometric reductive disproportionation of carbon dioxide to carbon monoxide and carbonate. Infrared spectroelectrochemical experiments show that the reaction proceeds through an intermediate radical anion formed by one-electron reduction, ultimately generating a ketene product and carbonate in the absence of additional organic or inorganic reagents.

The long‐sought carbene–bismuthinidene, (CAAC)Bi(Ph), has been synthesized. Notably, this represents both the first example of a carbene‐stabilized subvalent bismuth complex and the extension of the carbene‐pnictinidene concept to a non‐toxic metallic element (Bi). The bonding has been investigated by single‐crystal X‐ray diffraction studies and DFT calculations. This report also highlights the hitherto unknown reducing and ligand transfer capability of a beryllium(0) complex.

Emissive β-diketones (bdks) and difluoroboron complexes (BF2 bdks) show multi-stimuli responsive luminescence in both solution and the solid state. A series of bdk ligands and boron coordinated dyes were synthesized with different cyclic amine substituents in the 4-position to explore ring size effects on various luminescent properties, including solvatochromism, viscochromism, aggregation-induced emission (AIE), mechanochromic luminescence (ML) and halochromism. Red-shifted absorption and emission were observed in CH2 Cl2 for both bdk ligands and boron dyes with increasing substituent ring size. The compounds displayed bathochromic emission in more polar solvents, and higher fluorescence intensity in more viscous media. The AIE compounds exhibited enhanced emission when aggregated. For solid-state properties, a large emission wavelength shift was shown for the piperidine substituted bdk after melt quenching on weighing paper. Large blue-shifted emissions were observed in all the boron dye spin cast films after trifluoroacetic acid vapor annealing, and the original emissions were partially recovered after triethylamine vapor treatment.

The first examples of pyrene-fused Janus-type N-heterocyclic germylenes (NHGe) are reported. Remarkably, the pyrene linker and the germanium containing rings are extremely twisted, with "twist angles" up to 64°. Coordination of a Lewis base modifies the twisting of pyrene to an overall bent core (141° bend angle).

We report a trinuclear copper(II) complex, [(DAM)Cu3(μ3-O)][Cl]4 (1, DAM = dodecaaza macrotetracycle), as a homogeneous electrocatalyst for water oxidation to dioxygen in phosphate-buffered solutions at pH 7.0, 8.1, and 11.5. Electrocatalytic water oxidation at pH 7 occurs at an overpotential of 550 mV with a turnover frequency of ∼19 s–1 at 1.5 V vs NHE. Controlled potential electrolysis (CPE) experiments at pH 11.5 over 3 h at 1.2 V and at pH 8.1 for 40 min at 1.37 V vs NHE confirm the evolution of dioxygen with Faradaic efficiencies of 81% and 45%, respectively. Rinse tests conducted after CPE studies provide evidence for the homogeneous nature of the catalysis. The linear dependence of the current density on the catalyst concentration indicates a likely first-order dependence on the Cu precatalyst 1, while kinetic isotope studies (H2O versus D2O) point to involvement of a proton in or preceding the rate-determining step. Rotating ring-disk electrode measurements at pH 8.1 and 11.2 show no evidence of H2O2 formation and support selectivity to form dioxygen. Freeze-quench electron paramagnetic resonance studies during electrolysis provide evidence for the formation of a molecular copper intermediate. Experimental and computational studies support a key role of the phosphate as an acceptor base. Moreover, density functional theory calculations highlight the importance of second-sphere interactions and the role of the nitrogen-based ligands to facilitate proton transfer processes.

We report a combined experimental and theoretical study on the first examples of carbodicarbene (CDC)‐stabilized bismuth complexes, which feature low‐coordinate cationic bismuth centers with C=Bi multiple‐bond character. Monocations [(CDC)Bi(Ph)Cl][SbF6] (8) and [(CDC)BiBr2(THF)2][SbF6] (11), dications [(CDC)Bi(Ph)][SbF6]2 (9) and [(CDC)BiBr(THF)3][NTf2]2 (12), and trication [(CDC)2Bi][NTf2]3 (13) have been synthesized via sequential halide abstractions from (CDC)Bi(Ph)Cl2 (7) and (CDC)BiBr3 (10). Notably, the dications and trication exhibit C⇉ Bi double dative bonds and thus represent unprecedented bismaalkene cations. The synthesis of these species highlights a unique non‐reductive route to C−Bi π‐bonding character. The CDC‐[Bi] complexes (7–13) were compared with related NHC‐[Bi] complexes (1, 3–6) and show substantially different structural properties. Indeed, the CDC ligand has a remarkable influence on the overall stability of the resulting low‐coordinate Bi complexes, suggesting that CDC is a superior ligand to NHC in heavy pnictogen chemistry., Unprecedented low‐coordinate carbodicarbene bismaalkene cations have been prepared which feature C⇉ Bi double dative bonds. The synthesis of these compounds represents a unique non‐reductive route to C=Bi double‐bond character.

The sterically bulky compounds N,N′-bismesityl phenanthrene-9,10-diimine [1] and imine–nitrone [2] were synthesized. To the best of our knowledge, this is the first report of the synthesis of a bulky steric imine–nitrone accessed from the secondary ketimine using urea hydrogen peroxide over methyltrioxorhenium catalyst. Purified compounds were characterized using 1H and 13C NMR, high-resolution mass spectrometry, and infrared spectrometry. We report the first crystal structure of compound 1. Detailed IR bands of compounds 1 and 2 were assigned by comparing experimentally measured spectra to individually animated modes of quantum mechanically computed spectra. We believe these compounds may be of use as bidentate ligands in the synthesis of novel organometallic compounds. The asymmetric N and O coordination sites of compound 2 might impart interesting electronic effects to organometallic compounds compared to the symmetric N,N′-coordination sites of compound 1.

Interactions between a nitro group and an aromatic ring have been identified as an important aspect within the solid-state structures of many energetic materials. We investigated nitro-aromatic interactions within a molecular “torsion balance”, both in solid-state as well as in solution. Our balance features a Troger’s base and a nitroalkene functionality substituted at 1 and 8 positions of a naphthalene ring. Because of restricted rotation around a biaryl axis, the balance can adapt two principal atropisomeric conformations: folded and unfolded. Intramolecular nitro-aromatic interactions are feasible only in the folded state. A torsion balance containing a highly electron deficient aromatic ring crystallized in the folded state leading to the formation of a short (

The new iron(IV) nitride complex PhB(iPr2Im)3Fe≡N reacts with 2 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) to provide PhB(iPr2Im)3Fe(CN)(N2)(BAC). This unusual example of a four-electron reaction involves carbon atom transfer from BAC to create a cyanide ligand along with the alkyne iPr2N-C≡C-NiPr2. The iron complex is in equilibrium with an N2-free species. Further reaction with CO leads to formation of a CO analogue, which can be independently prepared using NaCN as the cyanide source, while reaction with B(C6F5)3 provides the cyanoborane derivative.

N‐Heterocyclic carbene (NHC)‐ and cyclic (alkyl)(amino)carbene (CAAC)‐stabilized borafluorene radicals have been isolated and characterized by elemental analysis, single‐crystal X‐ray diffraction, UV/Vis absorption, cyclic voltammetry (CV), electron paramagnetic resonance (EPR) spectroscopy, and theoretical studies. Both the CAAC–borafluorene radical (2) and the NHC–borafluorene radical (4) have a considerable amount of spin density localized on the boron atoms (0.322 for 2 and 0.369 for 4). In compound 2, the unpaired electron is also partly delocalized over the CAAC ligand carbeneC and N atoms. However, the unpaired electron in compound 4 mainly resides throughout the borafluorene π‐system, with significantly less delocalization over the NHC ligand. These results highlight the Lewis base dependent electrostructural tuning of materials‐relevant radicals. Notably, this is the first report of crystalline borafluorene radicals, and these species exhibit remarkable solid‐state and solution stability., Crystalline, isolable borafluorene radicals that are stabilized by N‐heterocyclic carbene or cyclic (alkyl)(amino)carbene ligands have been synthesized. They exhibit remarkable solution and solid‐state stability and were characterized by elemental analysis, single‐crystal X‐ray diffraction, UV/Vis absorption, cyclic voltammetry, EPR spectroscopy, and theoretical studies.

“Roller-wheel” shaped Pt-containing molecules display enhanced crystallinity and are better performing organic solar cell materials than conventional small molecules and polymers featuring “dumbbell” shaped structures., A novel Pt-bisacetylide small molecule (Pt-SM) featuring “roller-wheel” geometry was synthesized and characterized. When compared with conventional Pt-containing polymers and small molecules having “dumbbell” shaped structures, Pt-SM displays enhanced crystallinity and intermolecular π–π interactions, as well as favorable panchromatic absorption behaviors. Organic solar cells (OSCs) employing Pt-SM achieve power conversion efficiencies (PCEs) up to 5.9%, the highest reported so far for Pt-containing polymers and small molecules.

Alkyl and alkenyl arenes are used in a wide range of products. However, the synthesis of 1-phenylalkanes or their alkenyl variants from arenes and alkenes is not accessible with current commercial acid-based catalytic processes. Here, it is reported that an air-stable Rh(I) complex, (5-FP)Rh(TFA)(η^2-C_2H_4) (5-FP = 1,2-bis(N-7-azaindolyl)benzene; TFA = trifluoroacetate), serves as a catalyst precursor for the oxidative conversion of arenes and alkenes to alkenyl arenes that are precursors to 1-phenylalkanes upon hydrogenation. It has been demonstrated that coordination of the 5-FP ligand enhances catalyst longevity compared to unligated Rh(I) catalyst precursors, and the 5-FP-ligated catalyst permits in situ recycling of the Cu(II) oxidant using air. The 5-FP ligand provides a Rh catalyst that can maintain activity for arene alkenylation over at least 2 weeks in reactions at 150 °C that involve multiple Cu(II) regeneration steps using air. Conditions to achieve >13 000 catalytic turnovers with an 8:1 linear:branched (L:B) ratio have been demonstrated. In addition, the catalyst is active under aerobic conditions using air as the sole oxidant. At 80 °C, an 18:1 L:B ratio of alkenyl arenes has been observed, but the reaction rate is substantially reduced compared to 150 °C. Quantum mechanics (QM) calculations compare two predicted reaction pathways with the experimental data, showing that an oxidative addition/reductive elimination pathway is energetically favored over a pathway that involves C–H activation by concerted metalation–deprotonation. In addition, our QM computations are consistent with the observed selectivity (11:1) for linear alkenyl arene products.

We report the synthesis, characterization, and gas adsorption analyses of a new charge-separated metal–organic framework (MOF), UNM-1 (C52H16BCuF16N4), possessing diamondoid structures, assembled from an anionic tetrahedral borate ligand and cationic Cu(I) metal ion. The resulting MOF structure displays four-fold interpenetration, resulting in high environmental stability, and at the same time possesses relatively large surface area (SABET = 621 m2 g−1) due to the absence of free ions. Gas adsorption measurements revealed temperature-dependent CO2 adsorption/desorption hysteresis and large CO2/N2 ideal selectivities up to ca. 99 at 313 K and 1 bar, suggesting potential applications of this type of charge-separated MOFs in flue gas treatment and CO2 sequestration.

Cinchona alkaloid-derived chiral catalysts represent one of the most widely applied classes of organocatalysts, which have been successfully utilized in the promotion of a wide variety of asymmetric reactions. Cinchona alkaloids exist in nature as pseudoenantiomers, which allow cinchona alkaloid-catalyzed reactions to provide high enantioselectivities and yields toward both enantiomers of interest in many reactions. On the other hand, the subtle structural difference between pseudoenantiomeric cinchona alkaloids could also lead to uneven efficiency that severely limits the applicability of some cinchona alkaloid-catalyzed reactions. We describe here the elucidation of the origin of and the consequent development of novel modified cinchona alkaloids to address such a problem in asymmetric imine umpolung reactions by cinchonium salts.

The structure of the title compound, {(NH4)2[Cu(C2O4)2]}n, at 100 K has monoclinic (P21/c) symmetry with the CuIIatom on an inversion center. The compound has a polymeric structure due to long Cu...O interactions which create [Cu(C2O4)2] chains along theaaxis. The structure also displays intermolecular N—H...O hydrogen bonding, which links these chains into a three-dimensional network.

We report the synthesis, characterization, and detailed comparison of a series of novel Pt-bisacetylide containing conjugated small molecules possessing an unconventional "roller-wheel" shaped structure that is distinctly different from the "dumbbell" designs in traditional Pt-bisacetylide containing conjugated polymers and small molecules. The relationships between the chemical nature and length of the "rollers" and the electronic and physical properties of the materials are carefully studied by steady-state spectroscopy, cyclic voltammetry, differential scanning calorimetry, single-crystal X-ray diffraction, transient absorption spectroscopy, theoretical calculation, and device application. It was revealed that if the roller are long enough, these molecules can "slip-stack" in the solid state, leading to high crystallinity and charge mobility. Organic solar cells were fabricated and showed power conversion efficiencies up to 5.9%, out-performing all existing Pt-containing materials. The device performance was also found to be sensitive to optimization conditions and blend morphologies, which are a result of the intricate interplay among materials crystallinity, phase separation, and the relative positions of the lowest singlet and triplet excited states.

The catalytic reactivity of the high-spin Mn(II) pyridinophane complexes [(Py2NR2)Mn(H2O)2]2+ (R = H, Me, tBu) towards O2 formation is reported. With small macrocycle N-substituents (R = H, Me), the complexes catalytically disproportionate H2O2 in aqueous solution. While this catalysis is shut down with a bulky substituent (R = tBu), the complex becomes active for electrocatalytic H2O oxidation in aqueous solution. Control experiments are in support of a homogeneous molecular catalyst and preliminary mechanistic studies suggest the catalyst is mononuclear. This ligand-controlled switch in catalytic reactivity has implications for the design of new manganese-based water oxidation catalysts.