Search

Plant growth-promoting bacteria are ecological alternatives for fertilization, mainly for gramineous. Since plant x bacteria interaction is genotype and strain dependent, searching for new strains may contribute to the development of new biofertilizers. We aim to characterize plant growth-promoting capacity of Leclercia adecarboxylata strain Palotina, formerly isolated by our group in corn. A single isolated colony was taken and its genome was sequenced using Illumina technology. The whole genome was compared to other Leclercia adecarboxylata strains, and their biological and growth-promoting traits, such as P solubilization and auxin production, were tested. Following that, a 4.8 Mb genome of L. adecarboxylata strain Palotina was assembled and the functional annotation was carried out. This paper is the first to report the genes associated with plant growth promotion demonstrating in vitro indole acid production by this strain. These results project the endophyte as a potential biofertilizer for further commercial exploitation.

HMGB-like proteins are architectural chromatin factors, and their function is heavily dependent on their ability to interact with DNA (especially non-canonical DNA structures). HMGB1 is involved in many DNA processes, and dysregulation of HMGB protein expression has profound effects on cellular transcription, resulting in severe developmental defects as well as cancer. During DNA replication, elements that form the origin are still not well defined in metazoans. Sites with A (adenine) or T (thymine) repeats cause intrinsic curvatures in the DNA and are described to be involved in the replication machinery by providing binding sites to replication proteins. As a result, the DNA molecule shows intrinsically bent DNA sites, caused by periodic repeats of 2 or more As/Ts (dA/dT) as well as intrinsically non-bent DNA sites (INBDs), due to a succession of curvatures that cancel each other. In the present study, we mapped 11 INBDSs present in the AMPD2 gene that are related to each replication origin (oriGNAI3, oriC, oriB, and oriA). Following characterization of INBDSs, we tested the ability of HMGB1 to bind to the bent (b1, b2, b4a, b4b, b5, b6, b7, and b8) and non-bent DNA fragments (nb7, nb11, nb1, nb2, nb4, and nb5) via electrophoretic mobility shift assays. All fragments showed efficient binding to HMGB1. However, the non-bent DNA fragments nb2, nb4, and nb5 showed slightly reduced binding efficiency.

Previous reports demonstrated that actin is necessary for nucleocapsid transport and viral gene expression during nucleopolyhedrovirus infection of Bombyx mori. The first intron of B. mori A3 actin contains a cryptic promoter that drives expression of a rare isoform. We detected differences in the size and nucleotide composition of the first intron of the A3 actin gene from B. mori strain C24A, which is more resistant to nucleopolyhedrovirus than the M11A strain (22 and 95% lethality, respectively). We sought to determine if resistance to BmMNPV infection and the A3 actin promoter structure are correlated. Intrinsically bent DNA sites in these sequences, which determine curved structures, were analyzed by electrophoretic mobility assays and the helical parameters ENDS ratio, roll and twist. We found both fragments to have non-centralized bent DNA sites with distinct ENDS ratio values, nucleotide positions and two-dimensional structures. Additionally, a conformational-sensitive gel electrophoresis assay identified an allelic variation found in strain M11A that is absent in strain C24A. These data suggest that A3 actin intronic sequence variations impair virus propagation and are markers of BmMNPV-resistant populations.

Multiple sequence alignments of the Bombyx mori fibroin light chain gene (fib-L) from hybrids and from Chinese and Japanese strains demonstrated that 51.6% of the fib-L third intron is conserved. One of these conserved segments, 41 bp long, contains the sequence CGTTATTATACATATT, which is duplicated in the B. mori Nd-s(D) mutant. In the present work, electrophoretic mobility assays and computational analyses revealed a major peak of intrinsic bent DNA within the segment that undergoes breakage in the previously-described Nd-s(D) mutation. This result suggested that this intrinsically-curved region might mediate DNA cleavage and enhance recombination events in the third intron of the Bombyx mori fib-L gene.

The features of the nucleotide sequences in both replication and promoter regions have been investigated in many organisms. Intrinsically bent DNA sites associated with transcription have been described in several prokaryotic organisms. The aim of the present study was to investigate intrinsic bent DNA sites in the segment that holds the chromosomal replication origin, oriC, of Xylella fastidiosa 9a5c. Electrophoretic behavior analyses, as well as in silico analyses of both the 2-D projection and helical parameters, were performed. The chromosomal segment analyzed contains the initial sequence of the rpmH gene, an intergenic region, the dnaA gene, the oriC sequence, and the 5' partial sequence of the dnaN gene. The analysis revealed fragments with reduced electrophoretic mobility, which indicates the presence of curved DNA segments. The analysis of the helical parameter ENDS ratio revealed three bent DNA sites (b1, b2, and b3) located in the rpmH-dnaA intergenic region, the dnaA gene, and the oriC 5' end, respectively. The chromosomal segment of X. fastidiosa analyzed here is rich in phased AT tracts and in CAnT motifs. The 2-D projection indicated a segment whose structure was determined by the cumulative effect of all bent DNA sites. Further, the in silico analysis of the three different bacterial oriC sequences indicated similar negative roll and twist >34.00 degrees values. The DnaA box sequences, and other motifs in them, may be associated with the intrinsic DNA curvature.

We have identified bent DNA sites in the distal and proximal DNA puff BhC4-1 amplified gene promoter region of Bradysia hygida. The 2D modeling of the 3D DNA path and the ENDS ratio values calculated in this promoter region resulted in the identification of ten pronounced bent sites named BhC4Bˇ 9t oa 1. The 1847 bp fragment (ˇ 3697 toˇ 1850) in relation to the transcription start site shows multiple bending sites, BhC4Bˇ 9t oBhC4Bˇ 4, with periodicity300 bp. The analysis of the other identified bent region, starting at positionˇ 957, reveals that the BhC4B a 1 bent site colocalizes with the putative BhC4-1 minimal promoter. The sequence analysis of bent site BhC4Bˇ 4 shows a distribution of dA.dT at10 bp intervals between the middle of each tract, but intervals with more than one turn,20 bp, two helix turns, were detected in the other bent sites described here. The bent sites BhC4Bˇ 6 and BhC4B ˇ 4, contain two consensus sequences, with 60 bp each. The apparent molecular weight of fragments in the BhC4-1 promoter region were estimated in agarose gels and compared with the data obtained in polyacrylamide gels without and with ethidium bromide. The mobility reduction ratios (R-values) were determined, and a high R-value, 1.80, for a 1215 bp fragment in the distal promoter region and a 1.23 significant R-value for a 662 bp fragment in the proximal segment were found. To further analyze the predicted bent DNA sites in these fragments, the 2D trajectories of the 3D DNA path and other parameters, AT percentage, roll angle, ENDS ratio and DG, were determined. The role of these bent sites in the BhC4-1 transcription regulation is discussed. J. Cell. Biochem. 83: 1-13, 2001. fl 2001 Wiley-Liss, Inc.

Intrinsically bent DNA is an alternative conformation of the DNA molecule caused by the presence of dA/dT tracts, 2 to 6 bp long, in a helical turn phase DNA or with multiple intervals of 10 to 11 bp. Other than flexibility, intrinsic bending sites induce DNA curvature in particular chromosome regions such as replication origins and promoters. Intrinsically bent DNA sites are important in initiating DNA replication, and are sometimes found near to regions associated with the nuclear matrix. Many methods have been developed to localize bent sites, for example, circular permutation, computational analysis, and atomic force microscopy. This review discusses intrinsically bent DNA sites associated with replication origins and gene promoter regions in prokaryote and eukaryote cells. We also describe methods for identifying bent DNA sites for circular permutation and computational analysis.

The Rhynchosciara americana C3-22 gene is located in an amplified domain and is developmentally expressed. The aim of the present work was to identify intrinsically bent DNA sites in a segment containing the gene promoter and downstream sequence. The results indicated that this gene is flanked by intrinsically bent DNA sites. Three bent DNA sites (b(-3), b(-2), and b(-1)) were localized in the promoter, and one was localized downstream of the gene (b(+1)). These sites had helical parameters that confirmed the curved structure, as well as segments with left-handed superhelical writhe. In silico analysis of the promoters of four other insect genes, which encode secreted polypeptides, showed that they all had curved structures and similar helical parameters. Correlation with other results indicates that the detected intrinsically bent DNA sites that flank the C3-22 gene might be a consensus feature of the gene structure in the amplified domains.

Intrinsic bent DNA sites were identified in the 4289 bp segment encompassing the replication zone which directs DNA amplification and transcription of the C3-22 gene of Rhynchosciara americana. Restriction fragments showed reduced electrophoretic mobility in polyacrylamide gels. The 2D modeling of the 3D DNA path and the ENDS ratio values obtained from the dinucleotide wedge model of Trifonov revealed the presence of four major bent sites, positioned at nucleotides -6753, -5433, -5133 and -4757. Sequence analysis showed that these bends are composed of 2-6 bp dA.dT tracts in phase with the DNA helical repeat. The circular permutation analysis permitted the verification that the fragments containing the bending sites promote curvature in other sequence contexts. Computer analyses of the 4289 bp sequence revealed low helical stability (DeltaG values), negative roll angles indicating a narrow minor groove and a putative matrix attachment region. The data presented in this paper add to information about the structural features involved in this amplified segment.