Search

In the following work, a new method for the analysis of the phthalate monoesters in human urine was reported. Phthalate monoesters are metabolites generated as a result of phthalate exposure. In compliance with the dictates of Green Analytical Chemistry, a rapid and simple protocol was developed and optimized for the quantification of phthalate monoesters (i.e., monoethyl phthalate, monoisobutyl phthalate, mono‐n‐butyl phthalate, mono‐(2‐ethylhexyl) phthalate, mono‐n‐octyl phthalate, monocyclohexyl phthalate, mono‐isononyl phthalate) in human urine, which entails preceding derivatization with methyl chloroformate combined with the use of commercial solid phase microextraction and the analysis by gas chromatography‐triple quadrupole mass spectrometry. The affinity of the derivatized analytes toward five commercial coatings was evaluated, and in terms of analyte extraction, the best results were reached with the use of the divinylbenzene/carboxen/polydimethylsiloxane fiber. The multivariate approach of experimental design was used to seek for the best working conditions of the derivatization reaction and the solid phase microextraction, thus obtaining the optimum response values. The proposed method was validated according to the guidelines issued by the Food and Drug Administration achieving satisfactory values in terms of linearity, sensitivity, matrix effect, intra‐ and inter‐day accuracy, and precision. [ABSTRACT FROM AUTHOR]

Abstract: In this work, a polydimethylsiloxane/divinylbenzene fiber overcoated with a layer of polydimethylsiloxane was evaluated as analytical sampling tool for the first time in human urine. Urinary polycyclic aromatic hydrocarbons with 2–6 aromatic rings were considered as target compounds. The analyte uptake in kinetic and thermodynamic regime was evaluated and compared to the performances of polydimethylsiloxane/divinylbenzene and polydimethylsiloxane fibers. The assessment of the robustness and endurance of the overcoated fiber was carried out by direct immersion solid‐phase microextraction in undiluted urine performing up to 120 consecutive extractions. The overcoated fiber was then used to develop a fast and easy direct immersion solid‐phase microextraction with gas chromatography and triple quadrupole mass spectrometry protocol for the quantification of the target polycyclic aromatic hydrocarbons. The attained values of accuracy and precision were 75–114% and 2–19%, respectively, while the limits of quantification ranged between 0.05 and 1 ng/L. The proposed protocol was applied to the screening of urine samples collected from smoking and nonsmoking volunteers. The successful results obtained by using the overcoated fiber create not only new alternatives for polycyclic aromatic hydrocarbon exposure assessment but also new perspectives for the application of direct immersion solid‐phase microextraction to the analysis of bioclinical matrixes. [ABSTRACT FROM AUTHOR]

This work proposes a new method for the quantification of benzothiazoles (BTs), benzotriazoles (BTRs), and benzenesulfonamides (BSAs) in tap water, river water, and wastewater. The protocol involved the use of microextraction by packed sorbent (MEPS), applied for the first time for the extraction of the target analytes, combined with programmed temperature vaporization-gas chromatography-triple quadrupole mass spectrometry (PTV-GC-QqQ-MS). Considering the synergism between MEPS extraction and PTV injection, the experimental variables affecting their performance were simultaneously optimized by "experimental design", while principal component analysis (PCA) was used to find the overall optimal working conditions. Response surface methodology was used to gain a comprehensive understanding of the effects of working variables on method performance. The developed method achieved very good linearities and satisfactory intra- and inter-day accuracies and precisions. The protocol permitted the detection of the target molecules with limit of detection (LODs) values between 0.005 and 0.85 μg/L. The green character of the procedure was evaluated using three metrics: "Analytical Eco-Scale", "Green Analytical Procedure Index" (GAPI), and "Analytical Greenness metric for sample preparation (AGREEprep). The satisfactory results obtained with real water samples demonstrate the applicability of the method for monitoring campaigns and exposome studies. [Display omitted] • A new automatable method for BTs, BTRs, and BSAs quantitation in waters is presented. • MEPS extraction and PTV injection were synergistically optimized by experimental design. • PCA was used to determine the most desirable working condition for maximum sensitivity. • The target compounds were quantified with LODs ranging between 0.005 and 0.85 μg/L. • The "green" character of the procedure was evaluated by greenness metric approaches. [ABSTRACT FROM AUTHOR]

Benzothiazoles (BTHs), benzotriazoles (BTRs), and benzenesulfonamides (BSAs) are chemicals used in several industrial and household applications. Despite these compounds are emerging pollutants, there is still a lack of information about their presence in outdoor air samples. In this paper, we developed a new method for the quantification of BTHs, BTRs, and BSAs in airborne particulate matter (PM 10). The extraction of fourteen analytes from PM 10 was accomplished by microwave-assisted extraction (MAE) using an environmentally friendly mixture of water and ethanol. SPME was used to analyze the target compounds from the MAE extract by gas chromatography-tandem mass spectrometry (SPME-GC-MS/MS), eliminating additional sample clean-up steps. The best working conditions for MAE and SPME were examined multivariately by experimental design techniques. The target compounds were quantified in selected reaction monitoring acquisition mode. The proposed method was carefully validated, and the achieved results were satisfactory in terms of linearity, lower limit of quantification (picograms per cubic meter), intra- and inter-day accuracy (81–118% and 82–114%, respectively), and precision (repeatability and reproducibility in the range 2.3–17% and 7.4–19%, respectively). The application in a real monitoring campaign showed that the developed protocol is a valuable and eco-friendly alternative to the methods proposed so far. [Display omitted] • A new method for BTHs, BTRs and BSAs analysis in airborne PM 10 is presented. • BTHs, BTRs and BSAs are extracted from PM 10 by MAE. • The method uses only a water/ethanol mixture in the whole procedure. • The analytes are sampled by SPME without any clean-up step. • MAE and SPME were optimized by experimental design. [ABSTRACT FROM AUTHOR]

• An easy method for parabens and bisphenols quantitation in human saliva is presented. • Methyl chloroformate was used as derivatizing reagent. • The entire procedure provides for only 20 µL of organic reagents/solvents. • The target compounds were quantified with LLOQs at 10 and 100 ng/L. • The "green" character of the procedure was evaluated by greenness metrics. The herein presented work aims to the development of an easy method for the quantitative determination of parabens and bisphenols in human salivabased on the use of methyl chloroformate as a derivatizing agent, followed by solid-phase microextraction (SPME) and gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS) analysis with selected reaction monitoring (SRM). Using multivariate analysis, two derivatization strategies were compared and optimized, demonstrating that the use of methyl chloroformate led to better sensitivity than the classical derivatization by acetic anhydride. Good performance in the sorption process of the derivatized target analytes was obtained using the most recent commercialized overcoated fiber (PDMS/DVB/PDMS). The validation procedure of the final protocol led to satisfactory results in terms of linearity, limit of quantitation, accuracy, and precision. All parabens were quantified from 10 ng/L using the developed method, except for methylparaben, which was quantified from 100 ng/L along with all bisphenols. Intra- and inter-day accuracy and intra- and inter-day precision can be considered satisfactory for all analytes (values between 73% and 118%), except for the inter-day accuracy of BPF. Quite good results also in terms of matrix effect were obtained for the target compounds (range 71% to 118%, RSD% less than 13.6%), except for BPA at the middle concentration and MeP at the lowest concentration. The greenness of the method was evaluated and the results indicated that our approach is more eco-friendly than previously published methods. Based on its characteristics, the presented method can be considered a suitable approach to determine parabens and bisphenols in routine analysis for biomonitoring purposes. [ABSTRACT FROM AUTHOR]

Particulate matter (PM) is among the most dangerous air pollutants, and there is a growing concern related to the effects of airborne particles on human health. Their harmful effects can be derived are directly linked to the size of particles themselves and the associated pollutants after they have been taken up by inhalation. In this work was developed a new analytical method for the quantification of organophosphorus esters (OPE) bound to airborne PM. The proposed protocol provides for the microwave-assisted extraction (MAE) of the analytes from the PM followed by solid-phase microextraction gas chromatography-tandem mass spectrometry determination (SPME-GC-MS/MS). Unlike to the traditional protocol, which provides for the use of tedious Soxhlet extraction with environmentally damaging organic solvents, the proposed method allows for a reliable quantification by using an eco-friendly hydroalcoholic mixture (water/ethanol; 50:50, v/v). The method was developed using as target compounds ten organophosphate esters, namely tripropyl phosphate (TPP), tri-n-butyl phosphate (TBP), tris(2-chloroethyl) phosphate (TCEP), tris(1-chloro-2-propyl) phosphate (TCPP), tris(1,3-dichloro-2-propyl) phosphate (TDCPP), tributoxyethyl phosphate (TBEP), triphenyl phosphate (TPhP), 2-ethylhexyl-diphenyl phosphate (EHDPP), tris(2-ethylhexyl) phosphate (TEHP) and tricresyl phosphate (TCP). The extraction performance of five SPME fibers was evaluated and the DVB/CAR/PDMS coating demonstrated to be the most suitable for the extraction of the target analytes. Experimental Design was used for the multivariate optimization of the parameters affecting the MAE process as well as the SPME extraction, and the optimal working conditions were determined by using Derringer's desirability function. The developed method was validated in terms of linearity, sensitivity (LLOQ values of 0.5 ng/mL for TDCPP and 0.1 ng/mL for the other analytes), matrix effect (81–117%), intra and inter day accuracy (83–115% and 80–115%, respectively), and precision (repeatability and reproducibility in the range 1.0–12.4% and 2.3–15.2%, respectively). The satisfactory performances reached make the proposed protocol a green and high-throughput alternative for OPE quantification in particulate matter. [ABSTRACT FROM AUTHOR]

Polyamines are aliphatic amines with low molecular weight that are widely recognized as one of the most important cancer biomarkers for early diagnosis and treatment. The goal of the work herein presented is the development of a rapid and simple method for the quantification of free polyamines (i.e., putrescine, cadaverine, spermidine, spermine) and N -monoacetylated polyamines (i.e., N 1 -Acetylspermidine, N 8 -Acetylspermidine, and N 1 -Acetylspermine) in human urine. A preliminary derivatization with propyl chloroformate combined with the use of solid phase microextraction (SPME) allowed for an easy and automatable protocol involving minimal sample handling and no consumption of organic solvents. The affinity of the analytes toward five commercial SPME coatings was evaluated in univariate mode, and the best result in terms of analyte extraction was achieved using the divinylbenzene/carboxen/polydimethylsiloxane fiber. The variables affecting the performance of SPME analysis were optimized by the multivariate approach of experimental design and, in particular, using a central composite design (CCD). The optimal working conditions in terms of response values are the following: extraction temperature 40 °C, extraction time of 15 min and no addition of NaCl. Analyses were carried out by gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS) in selected reaction monitoring (SRM) acquisition mode. The developed method was validated according to the guidelines issued by the Food and Drug Administration (FDA). The satisfactory performances reached in terms of linearity, sensitivity (LOQs between 0.01 and 0.1 μg/mL), matrix effect (68–121%), accuracy, and precision (inter-day values between −24% and +16% and in the range 3.3–28.4%, respectively) make the proposed protocol suitable to be adopted for quantification of these important biomarkers in urine samples. [ABSTRACT FROM AUTHOR]

Highlights: [•] A new SPME-GC-QqQ MS approach was developed for the determination of hydrazine in drinking water at trace levels. [•] Multivariate optimization was performed on derivatization reaction, mass spectrometry conditions and SPME parameters. [•] SRM acquisition by GC-QqQ-MS instrument enhances the ability in analyte quantification. [ABSTRACT FROM AUTHOR]

Highlights: [•] Benzothiazoles, benzotriazoles and benzosulfonamides determination in aqueous matrices. [•] New environmental-friendly and high-throughput protocol developed by SPME-GC–QqQMS. [•] Sample preparation strategy completely avoids the use of organic solvents. [•] MRM acquisition by GC–QqQ-MS instrument enhances analytes identification ability. [Copyright &y& Elsevier]

Highlights: [•] A SPME-GC–QqQ MS approach was developed for the quantification of dopamine, serotonin and norepinephrine in human urine. [•] The presence of organic solvents in the final protocol was minimized by the combined use of alkyl chloroformate and SPME. [•] SRM acquisition by GC–QqQ-MS instrument enhances the ability in analytes identification. [Copyright &y& Elsevier]

Abstract: Homovanillic acid (HVA), vanylmandelic acid (VMA), and 5-hydroxyindoleacetic acid (5-HIAA) are the metabolites of some catecholamines such as epinephrine, nor-epinephrine, dopamine and serotonin and their quantification is used in the diagnosis and management of patients with neurocrine tumors. A novel approach in the assay of these biomarkers in human urine samples by solid phase microextraction (SPME) combined with gas chromatography-triple quadrupole mass spectrometry (GC–QqQ-MS) is presented. A preliminary derivatization with ethyl chloroformate/ethanol was used and the corresponding derivatives were then extracted by SPME in immersion mode. The performance of five SPME fibers and three chloroformates were evaluated in univariate mode and the best results were obtained using the polyacrylate fiber and ethyl chloroformate. The variables affecting the efficiency of SPME analysis were optimized by the multivariate approach of “Experimental design” and, in particular, a central composite design (CCD) was applied. The optimum working conditions in terms of response values were achieved by performing analysis at room temperature with addition of NaCl (9.5%) and with an extraction time of 25.8min. Identification and quantification of analytes were carried out by using a gas chromatography-triple quadrupole mass spectrometry (GC–QqQ MS) system in multiple reaction monitoring (MRM) acquisition. An evaluation of all analytical parameters shows that the proposed method provides satisfactory results. Very good linearities were, in fact, achieved in the tested calibration ranges with correlation coefficient values >0.99 for all the analytes and accuracies and RSDs calculated for between-run and tested at concentrations of 1, 10, and 80mgL−1 were ranging from 91.3% to 106.6%, and from 0.5 to 8.9%, respectively. Moreover, the LOD values obtained can be considered very satisfactory (1.3, 0.046 and 24.3μgL−1 for HVA, VMA and 5-HIAA, respectively). The developed protocol represents, therefore, a simple, rapid and selective tool for assaying these acidic biomarkers in urine samples for neuroendocrine cancer diagnosis. [Copyright &y& Elsevier]

Abstract: A simple and sensitive method was developed for the quantification of five carbamate pesticides in water samples using solid phase microextraction (SPME) combined with gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS). The performance of five SPME fibers was tested in univariate mode whereas the other variables affecting the efficiency of SPME analysis were optimized by the multivariate approach of design of experiment (DoE) and, in particular, a central composite design (CCD) was applied. The optimum working conditions in terms of response values were achieved by performing analysis with polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber in immersion mode for 45min at room temperature with addition of NaCl (10%). The multivariate chemometric approach was also used to explore the chromatographic behavior of the carbamates and to evaluate the importance of each variable investigated. An overall appraisement of results shows that the factor which gave a statistically significant effect on the response was only the injection temperature. Identification and quantification of carbamates was performed by using a gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS) system in multiple reaction monitoring (MRM) acquisition. Since the choice of internal standard represented a crucial step in the development of method to achieve good reproducibility and robustness for the entire analytical protocol, three compounds (2,3,5-trimethacarb, 4-bromo-3,5-dimethylphenyl-n-methylcarbamate (BDMC) and carbaryl-d7) were evaluated as internal standards. Both precision and accuracy of the proposed protocol tested at concentration of 0.08, 5 and 3μgl−1 offered values ranging from 70.8% and 115.7% (except for carbaryl at 3μgl−1) and from 1.0% and 9.0% for accuracy and precision, respectively. Moreover, LOD and LOQ values ranging from 0.04 to 1.7ngl−1 and from 0.64 to 2.9ngl−1, respectively, can be considered very satisfactory. [Copyright &y& Elsevier]

Abstract: The work aims at developing a rapid and sensitive method for the quantification of perfluorocarboxylic acids in aqueous matrices. The proposed analytical approach is based on the use of solid phase microextraction in headspace mode after a fast derivatization of the carboxylate function by propylchloroformate/propanol mixture. Several fibers were evaluated and the optimization of the parameters affecting the SPME process was carried out using a central composite design. The optimum working conditions in terms of response values were achieved by performing analysis with CAR/PDMS fiber at room temperature, without addition of NaCl, with a sample volume of 6ml and an extraction time of 10min. Assay of PFCAs was performed by using a gas chromatography–triple quadrupole mass spectrometry (GC–QqQ MS) system in negative chemical ionization mode with ammonia as reagent gas. An overall evaluation of all analytical parameters shows that the proposed method provides satisfactory results. In particular, the observed accuracies, ranging from 84.4% to 116.8%, and the RSD values in the range 0.4% and 14.5% confirm the effectiveness of the developed protocol in the assay of PFCAs content in aqueous matrices. Moreover, LOD and LOQ values ranging from 0.08 to 6.6ngl−1 and from 0.17 to 14.3ngl−1, respectively, can be considered very satisfactory. None of the compounds were detected in six samples of river collected in Calabria. [Copyright &y& Elsevier]

Abstract: A gas chromatography–tandem mass spectrometry (GC–MS/MS) method for the detection of six phthalates in olive oil was developed. A gel permeation chromatography (GPC) clean-up step with cyclohexane:dichoromethane 7:3 as mobile phase was employed to remove the high-molecular mass species present in oil. Two ionization methodologies, i.e. electron (EI) and isobutane-chemical ionization (CI), were compared, in MS/MS mode, to achieve better analytical performances. An overall evaluation of all analytical parameters shows that the EI-MS/MS approach provides satisfactory results and is to be preferred to CI-MS/MS, at least in the case of the examined analytes. The observed accuracies, ranging from 71.7% to 112.2%, and the RSD values less than 9.7%, confirm the effectiveness of the proposed method in the assay of phthalate content in such a complex matrix as olive oil. The proposed protocol for the identification and assay of phthalates in olive oil might be of interest for the implementation of the QS (quality assurance scheme) for residue monitoring in food safety assessment. [Copyright &y& Elsevier]