Search

Stable chlorine isotope analysis of organic compounds is potentially applicable in various fields in forensics and environmental analytics to investigate the fate of these substances in the environment, but a wider use of this technique is still hampered by the limited applicability of available offline and online techniques. In a previous study we presented a method for compound-specific chlorine isotope analysis of volatile organics including chlorinated methanes, ethanes and ethenes using gas chromatography interfaced with multiple-collector inductively coupled plasma mass spectrometry (GC-MC-ICPMS). In the current study we modified further the setup in order to extend the range of analytes towards semi-volatile organic substances with boiling points of up to 350 °C. The modified method was evaluated by using offline characterized in-house reference materials, such as chloroethenes, chloroacetic acid and hexachlorocyclohexenes. Additionally, analysis of various chlorinated benzenes, chlorinated phenols, chlordecone, dichlorodiphenyltrichloroethane (DDT) and related derivatives was demonstrated. The analytical precision (1σ) was usually better than ±0.2 mUr for single compound and ±0.3 mUr for compound-specific analysis of mixtures. Achieved accuracy was within ±0.2 mUr compared to available offline values. The isotopic detection limit could be significantly improved by one order of magnitude (250 pmol Cl on column, corresponding to ∼10 ng Cl) and is superior to other online state of the art approaches. The demonstrated method allows for the compound-specific stable chlorine isotope analysis of virtually all GC-compatible organics with versatility, high accuracy, and sensitivity. [ABSTRACT FROM AUTHOR]

A system was developed for collecting from the ambient atmosphere the methyl halides CH3Cl and CH3Br in quantities sufficient for chlorine and bromine isotope analysis. The construction and operation of the novel cryogenic collection system (cryosampler) and sample purification system developed for this task are described. This study demonstrates the capability of the cryosampler by quantifying the CH3Cl and CH3Br collected from atmospheric samples and the nonfractionating bromine isotope fingerprint of CH3Br from synthetic air samples of controlled composition. An optimized cryosampler operation time of 4 h at a flow rate of 15 L min−1 is applied to yield the nearly 40 ng required for subsequent δ81Br-CH3Br analyses. The sample purification system is designed around a packed column gas chromatography-quadropole-mass spectrometry (GCqMS) system with three additional cryotraps and backflushing capacity. The system's suitability was tested by observing both the mass recovery and the lack of Δ81Br isotope fractionation induced during sample purification under varying flow rates and loading scenarios. To demonstrate that the entire system samples and dependably delivers CH3Br to the isotope analysis system without inducing isotope fractionation, diluted synthetic air mixtures prepared from standard gases were processed through the entire system, yielding a Δ81Br-CH3Br of +0.03‰ ± 0.10‰ relative to their starting composition. Finally, the combined cryosampler-purification and analysis system was applied to demonstrate the first-ever δ81Br-CH3Br in the ambient atmosphere with two samples collected in the autumn of 2011, yielding −0.08‰ ± 0.43‰ and +1.75‰ ± 0.13‰ versus standard mean ocean bromide for samples collected at a suburban Stockholm, Sweden, site. [ABSTRACT FROM AUTHOR]