Search

Wood-staining fungal pigments have shown potential use as colorants for wood and textiles, with organic solvents as the pigment carrier. Natural oils have been suggested as an environmentally friendly and more available carrier; however, oils promoted color degradation. The current study examined the mechanism of said degradation and tested therapeutic and food-grade oils (instead of finishing oils) for their potential to carry draconin red, the pigment from Scytalidium cuboideum, without color loss over time. FTIR analysis from finishing oils indicated that oxidation was not likely the cause of color loss as the pigment could not be distinguished from the oils in the IR spectra. SEM was employed to determine if crystal degradation was contributing to color loss and indicated, surprisingly, that the crystals of draconin red formed rather than degraded over time. This suggested crystal breakdown was also not likely the cause of color loss. The pigment did not show degradation in hemp oil, flaxseed oil, and cold-pressed linseed oil when treated with β-carotene. Further in-depth chemical studies are needed to determine the mechanism of color loss in pigmented natural oils; however, food-grade oils appear to be a promising alternative to carry draconin red, without degradation of the color. [ABSTRACT FROM AUTHOR]

Spalting fungal pigments have shown potential in technologies ranging from green energy generation to natural colorants. However, their unknown toxicity has been a barrier to industrial adoption. In order to gain an understanding of the safety of the pigments, zebrafish embryos were exposed to multiple forms of liquid media and solvent-extracted pigments with concentrations of purified pigment ranging from 0 to 50 mM from Chlorociboria aeruginosa, Chlorociboria aeruginascens, and Scytalidium cuboideum. Purified xylindein from Chlorociboria sp. did not show toxicity at any tested concentration, while the red pigment dramada from S. cuboideum was only associated with significant toxicity above 23.2 uM. However, liquid cultures and pigment extracted into dichloromethane (DCM) showed toxicity, suggesting the co-production of bioactive secondary metabolites. Future research on purification and the bioavailability of the red dramada pigment will be important to identify appropriate use; however, purified forms of the blue-green pigment xylindein are likely safe for use across industries. This opens the door to the adoption of green technologies based on these pigments, with potential to replace synthetic colorants and less stable natural pigments. [ABSTRACT FROM AUTHOR]

The use of fungal pigments as color additives to wood as a method to increase forest revenue is a relatively new, but quickly developing field. Sugar maple ( Acer saccharum) is currently the primary utilized hardwood for spalting and appears to be the best suited North American hardwood for such purposes. The combination of Trametes versicolor and Bjerkandera adusta has been identified in several instances as a strong fungal pairing for zone line production; however, Xylaria polymorpha is capable of creating zone lines without the antagonism of a secondary fungus. Few fungal pigments have been developed for reliable use; Scytalidium cuboideum is capable of producing a penetrating pink/red stain, as well as a blue pigment after extended incubation, and Chlorociboria sp. produces a blue/green pigment if grown on aspen ( Populus tremuloides). Several opportunities exist for stimulation of fungal pigments including the use of copper sulfate and changes in wood pH. [ABSTRACT FROM AUTHOR]

UV-light degradation of wood is one of the top reasons for consumer replacement of outdoor wooden structures. This type of degradation is seldom mechanical, and is instead often motivated by loss of aesthetics (graying). There are numerous commercial products available on the market that deal with this loss of color, many of which contain added pigments to 'rejuvenate' or 'revitalize' greyed wood. These pigments are almost uniformly synthetic. In contrast, pigments from wood decay fungi (spalting), which have been used in woodworking since the 1400s (intarsia), have remarkable optical (UV-light resistance) properties due to their naphthoquinonic configuration. In recent years the pigments made from these fungi have been extracted and tested across numerous substrates, from solar cells to textile dyes. In this work, researchers extracted pigments from Scytalidium cuboideum (red pigmentation) and Chlorociboria aeruginosa (blue-green pigmentation), solubilized the pigments in raw linseed oil, and tested the resulting solution on samples of Douglas-fir (Pseudotsuga menziesii) and western white pine (Pinus monticola). These mixtures were compared against a 'stain and coat' treatment (utilizing an aniline stain and coated with raw linseed oil), raw linseed oil, and untreated wood. The wood samples were then placed in an accelerated weathering machine (Q-UV) following the ASTM G154 standard, for 500 and 1000 h. The results showed that while no visible color change occurred to the wood when the pigmented oil was applied, the red pigment oil significantly lowered the coating degradation for both wood types at an exposure of 500 h. The results show the potential applications for fungal pigments in the wood coating industry, as it offers an increased coating service life. As there is a shift to renewable products, the pigments from wood decay fungi show potential as additives for wood coatings. [ABSTRACT FROM AUTHOR]

The use of both naturally occurring and synthetic pigmented wood has been prevalent in woodcraft for centuries. Modern manifestations generally involve either woodworkers’ aniline dyes, or pigments derived from a special class of fungi known as spalting fungi. While fungal pigments are more renewable than anilines and pose less of an environmental risk, the carrier required for these pigments—dichloromethane (DCM)—is both problematic for humans and tends to only deposit the pigments on the surface of wood instead of evenly within the material. Internal coloration of wood is key to adoption of a pigmenting system by woodworkers. To address this issue, five solvents that had moderate solubility with the pigments extracted from Chlorociboria aeruginosa and Scytalidium cuboideum were identified, in the hopes that a reduction in solubility would result in a greater amount of the pigment deposited inside the wood. Of the tested solvents, acetonitrile was found to produce the highest internal color in ash, Douglas-fir, madrone, mountain hemlock, Port-Orford cedar, Pacific silver fir, red alder and sugar maple. While these carrier solvents are not ideal for extracting the pigments from the fungi, acetonitrile in particular does appear to allow for more pigment to be deposited within wood. The use of acetonitrile over DCM offers new opportunities for possible industrial spalting applications, in which larger pieces of wood could be uniformly pigmented and sold to the end user in larger quantities than are currently available with spalted wood. [ABSTRACT FROM AUTHOR]