Search

The marine industry must reduce emissions to comply with recent and future regulations. Solid oxide fuel cells (SOFCs) are seen as a promising option for efficient power generation on ships with reduced emissions. However, it is unclear how the devices can be integrated and how this affects the operation of the ship economically and environmentally. This paper reviews studies that consider SOFC for marine applications. First, this article discusses noteworthy developments in SOFC systems, including power plant options and fuel possibilities. Next, it presents the design drivers for a marine power plant and explores how an SOFC system performs. Hereafter, the possibilities for integrating the SOFC system with the ship are examined, also considering economic and environmental impact. The review shows unexplored potential to successfully integrate SOFC with thermal and electrical systems in marine vessels. Additionally, it is identified that there are still possibilities to improve marine SOFC systems, for which a holistic approach is needed for design at cell, stack, module, and system level. Nevertheless, it is expected that hybridisation is needed for a technically and economically feasible ship. Despite its high cost, SOFC systems could significantly reduce GHG, NOX, SOX, PM, and noise emissions in shipping. [ABSTRACT FROM AUTHOR]

The environmental impact of ships needs to be reduced by using more sustainable and cleaner solutions for power generation on board to meet the increasing amount of regulations. Fuel cells are seen as one of the most promising solutions to address this challenge. There are various fuel cell technologies which can be combined with different fuel types, resulting in a large number of options. In order to find the best prospect, a review of the fuel and fuel cell technologies is performed to get an understanding of the possibilities and applicability of fuel cells on superyachts. Various systems were compared on the following characteristics: density, storage type, maturity, safety, and emissions. Based on these characteristics a decision-making tool was developed to assist in the decision-making process considering of many variables. Using this tool, it has become clear that a fuel cell solution should be specifically selected for any different type of application. The required applications or required usage of a fuel cell could lead to the selection of a completely different type of technology. [ABSTRACT FROM AUTHOR]

The upcoming stricter limitations on both pollutant and greenhouse gases emissions represent a challenge for the shipping sector. The entire ship design process requires an approach to innovation, with a particular focus on both the fuel choice and the power generation system. Among the possible alternatives, natural gas and hydrogen based propulsion systems seem to be promising in the medium and long term. Nonetheless, natural gas and hydrogen storage still represents a problem in terms of cargo volume reduction. This paper focuses on the storage issue, considering compressed gases, and presents an innovative solution, which has been developed in the European project GASVESSEL® that allows to store gaseous fuels with an energy density higher than conventional intermediate pressure containment systems. After a general overview of natural gas and hydrogen as fuels for shipping, a case study of a small Roll-on/Roll-off passenger ferry retrofit is proposed. The study analyses the technical feasibility of the installation of a hybrid power system with batteries and polymer electrolyte membrane fuel cells, fuelled by hydrogen. In particular, a process simulation model has been implemented to assess the quantity of hydrogen that can be stored on board, taking into account boundary conditions such as filling time, on shore storage capacity and cylinder wall temperature. The simulation results show that, if the fuel cells system is run continuously at steady state, to cover the energy need for one day of operation 140 kg of hydrogen are required. Using the innovative pressure cylinder at a storage pressure of 300 bar the volume required by the storage system, assessed on the basis of the containment system outer dimensions, is resulted to be 15.2 m3 with a weight of 2.5 ton. Even if the innovative type of pressure cylinder allows to reach an energy density higher than conventional intermediate pressure cylinders, the volume necessary to store a quantity of energy typical for the shipping sector is many times higher than that required by conventional fuels today used. The analysis points out, as expected, that the filling process is critical to maximize the stored hydrogen mass and that it is critical to measure the temperature of the cylinder walls in order not to exceed the material limits. Nevertheless, for specific application such as the one considered in the paper, the introduction of gaseous hydrogen as fuel, can be considered for implementing zero local emission propulsion system in the medium term. [ABSTRACT FROM AUTHOR]