Search

Background: Proximal humeri fractures at anatomical and surgical neck (∼5% and ∼50% incidence respectively) are frequent in elderly population. Yet, neither in-vitro experiments nor CT-based finite element analyses (CTFEA) have investigated these in depth. Herein we enhance (Dahan et al., 2019) (addressing anatomical neck fractures) by more experiments and specimens, accounting for surgical neck fractures and explore CTFEA's prediction of humeri mechanical response and yield force., Methods: Four fresh frozen human humeri were tested in a new experimental configuration inducing surgical neck fractures. Digital image correlation (DIC) provided strains and displacements on humeri surfaces and used to validate CTFEA predictions. CTFEA were enhanced herein to improve the accuracy at the proximal neck: A cortical bone mapping (CBM) algorithm was implemented to overcome insufficient scanning resolution, and a new trabecular material mapping was investigated., Results: The new experimental setting induced impacted surgical neck fractures in all humeri. Excellent DIC to CTFEA correlation in strains was obtained at the shaft (slope 0.984, R 2 =0.99) and a fair agreement (slope 0.807, R 2 =0.73) at the neck. CBM algorithm had worsened the correlation, whereas the new material mapping had a negligible influence. Yield loads predictions improved considerably when trabecular yielding (maximum principal strain criterion) was considered instead of surface cortical yielding., Discussion: CTFEA well predicts strains on the shaft and reasonably well on the neck. This enhances former conclusions by past studies conducted using SGs, now also evident by DIC. Yield load prediction for surgical neck fractures (involving crushing of trabecular bone) is predicted better by trabecular failure laws rather than cortex ones. Further FEA studies using trabecular orthotropic constitutive models and failure laws are warrant., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Background: Most benign active and latent lesions of proximal femur do not predispose a patient to a pathologic fracture. Nonetheless, there is a tendency to perform internal fixation due to the lack of accurate clinical tools that may reliably confirm low risk of pathologic fracture. As many as 30% of these surgeries may be unnecessary. A patient-specific CT-based finite element analysis may quantify bone strength and risk of fracture under normal weight-bearing conditions., Methods: The clinical relevance of such finite element analysis was investigated in a retrospective study on a cohort of 17 patients. Finite element analysis results (high risk = indication for surgery, low or moderate risk = follow-up) were compared to actual clinical decisions (surgery vs follow-up). All patients predicted by the finite element analysis as high risk underwent internal fixation and had good outcomes (n = 6)., Findings: Four of the 11 low- and moderate-risk finite element analysis patients (36%) were operated immediately, and seven (64%) were either operated after a delay of at least 6 months or were never operated. None sustained a pathologic fracture. Patients who were predicted as low fracture risk by finite element analysis remained fracture-free for a minimal period of 6 months. Prediction of high risk of pathologic fracture by finite element analysis was in complete agreement with the conventional clinical evaluation., Interpretation: We consider finite element analysis a promising decision support system for the management of patients with benign tumors of femur, and that it may reliably endorse the decision to withhold surgery for patients at low fracture-risk., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

A proximal humerus fracture is an injury to the shoulder joint that necessitates medical attention. While it is one of the most common fracture injuries impacting the elder community and those who suffer from traumatic falls or forceful collisions, there are almost no validated computational methods that can accurately model these fractures. This could be due to the complex, inhomogeneous bone microstructure, complex geometries, and the limitations of current fracture mechanics methods. In this paper, we develop a novel phase field method to investigate the proximal humerus fracture. To model the fracture in the inhomogeneous domain, we propose a power-law relationship between bone mineral density and critical energy release rate. The method is validated by an in vitro experiment, in which a human humerus is constrained on both ends while subjected to compressive loads on its head, in the longitudinal direction, that lead to fracture at the anatomical neck. CT scans are employed to acquire the bone geometry and material parameters, from which detailed finite element meshes with inhomogeneous Young modulus distributions are generated. The numerical method, implemented in a high performance computing environment, is used to quantitatively predict the complex 3D brittle fracture of the bone and is shown to be in good agreement with experimental observations. Furthermore, our findings show that the damage is initiated in the trabecular bone-head and propagates outward towards the bone cortex. We conclude that the proposed phase field method is a promising approach to model bone fracture., (© 2019 John Wiley & Sons, Ltd.)