Search

The CW RF test of 1.3 GHz 9-cell cavity in liquid helium bath at 2 K is a very important key point in the cavity procurement. Some problems can be found through the test, according which to optimized and improve the process of cavity. Recently, Medium temperature (mid-T) furnace bake of 1.3 GHz 9-cell cavities have been carried out at IHEP. Through the proceed of mid-T bake, the quality factor of cavity has been greatly improved. While the excitation of the parasitic modes in the high Q cavities CW cold test has been encountered, which implies an error source for the cavity gradient and quality factor determination. In order to ensure the testing accuracy of superconducting cavity, we have improved the testing system. Finally, the parasitic mode is completely suppressed and the CW RF cold test of high Q cavity is guaranteed.

Recently, heat treatment between 250 C and 500 C has been attempted to improve quality factor of superconducting radio-frequency cavities at FNAL and KEK. Experiments of such medium temperature (mid-T) bake with furnaces have also been carried out at IHEP. Firstly, eleven 1.3 GHz 1-cell cavities were treated with different temperatures at a small furnace. The average quality factor has reached 3.6E10 when the gradient is 16 MV/m. Then, the recipe of mid-T furnace bake at 300 C for 3 hours has been applied to six 1.3 GHz 9-cell cavities at a new big furnace. The average quality factor has reached 3.8E10 when the gradient is 16 MV/m., Comment: 10 pages, 12 figures

Vertical test is a commonly used experimental method to qualify Superconducting Radio Frequency (SRF) cavities. Taking the experiences at Jefferson Lab (JLab) in US for example, over thousand of vertical tests have been performed on over 500 different cavities up to now [1]. Most of the tests at JLab followed the method as described in [1], but all the uncertainties of the calculated quality factors as well as the gradients were in-accurate due to the wrong algorithm used. In this paper, a first-principle method was applied to analyze the uncertainty of the data, and the results were compared with those in [1] under typical experiment conditions., Comment: Reference-Tom Powers, Theory and Practice of Cavity Test Systems, in SRF2005. 8 pages, 4 figures

In this article a new idea is proposed by PKU group to improve the RF superconductive property of niobium cavity. Rare earth elements like scandium and yttrium are doped into ingot niobium during the smelting processes. A series of experiments have been done since 2010, and the preliminary testing results show that the magnetic property of niobium materials has been changed with different doping elements and proportions while the superconductive transition temperature almost does not change. Then a large ingot niobium doped with scandium was melted. RRR and mechanical properties were measured. This method may increase the superheating magnetic field and decrease surface resistance of niobium so as to improve the performance of niobium cavity which is a key component of SRF accelerators. A single-cell cavity made of Sc-doped niobium has been fabricated.