Search

Climate change is expected to alter both forest stand- and landscape-level dynamics through a change in environmental characteristics. While numerous studies have employed models to assess the ecological and/or economic impacts of such changes on forests throughout the world, there is need to further refine such analyses. In this paper, we contribute to this literature by coupling an ecological (PICUS–LANDIS II) modeling framework with an economic (computable general equilibrium) model to better account for the economic impact associated with climate-induced impacts on forest stand- and landscape-level structure and composition dynamics. Applying this framework to a case-study region of New Brunswick, Canada, we estimate that climate change will reduce softwood supply by 16%–73% and impact hardwood supply in the range of −2% to +4% by 2150. The change in wood supply is estimated to reduce the value of the softwood and hardwood forestry and logging sector output by up to 51% and 17%, respectively, by 2150. These sector-level impacts may lead to a 0.08%–0.88% reduction in annual gross domestic product by 2150. The methodological advances established in this study can be used to better inform future forest management and economic plans that aim to lessen both the ecological and economic impact of climate change. [ABSTRACT FROM AUTHOR]

The structure and fire regime of pre-industrial (historical) dry forests over ~26 million ha of the western USA is of growing importance because wildfires are increasing and spilling over into communities. Management is guided by current conditions relative to the historical range of variability (HRV). Two models of HRV, with different implications, have been debated since the 1990s in a complex series of papers, replies, and rebuttals. The "low-severity" model is that dry forests were relatively uniform, low in tree density, and dominated by low- to moderate-severity fires; the "mixed-severity" model is that dry forests were heterogeneous, with both low and high tree densities and a mixture of fire severities. Here, we simply rebut evidence in the low-severity model's latest review, including its 37 critiques of the mixed-severity model. A central finding of high-severity fire recently exceeding its historical rates was not supported by evidence in the review itself. A large body of published evidence supporting the mixed-severity model was omitted. These included numerous direct observations by early scientists, early forest atlases, early newspaper accounts, early oblique and aerial photographs, seven paleo-charcoal reconstructions, ≥18 tree-ring reconstructions, 15 land survey reconstructions, and analysis of forest inventory data. Our rebuttal shows that evidence omitted in the review left a falsification of the scientific record, with significant land management implications. The low-severity model is rejected and mixed-severity model is supported by the corrected body of scientific evidence. [ABSTRACT FROM AUTHOR]

The increasing level of atmospheric carbon dioxide and its effects on our climate system has become a global environment issue. The forest ecosystem is essential for the stability of carbon in the atmosphere as it operates as a carbon sink and provides a habitat for numerous species. Therefore, our understanding of the structural elements of the forest ecosystem is vital for the estimation of forest biomass or terrestrial carbon stocks. Over the last two decades, light detection and ranging (LIDAR) technology has significantly revolutionized our understanding of forest structures and enhanced our ability to monitor forest biomass. This paper presents a review of metrics for forest biomass estimation, outlines metrics selection methods for biomass modeling, and addresses various assessment criteria for the selection of allometric equations for the aboveground forest biomass estimations, using LIDAR data. After examining one hundred publications written by different authors between 1999 and 2023, it was observed that LIDAR technology has become a dominant data collection tool for aboveground biomass estimation with most studies focusing on the use of airborne LIDAR data for the plot-level analysis on a local scale. Parametric-based models dominated in most studies with coefficient of determination (R2) and root mean square error (RMSE) as assessment criteria. In addition, mean top canopy height (MCH) and quadratic mean height (QMH) were reported as strong predictors for aboveground biomass (AGB) estimation. Pixel-based uncertainty analysis was found to be a reliable method for assessing spatial variations in uncertainties. [ABSTRACT FROM AUTHOR]

Electric shorting induced by tall vegetation is one of the major hazards affecting power transmission lines extending through rural regions and rough terrain for tens of kilometres. This raises the need for an accurate, reliable, and cost-effective approach for continuous monitoring of canopy heights. This paper proposes and evaluates two deep convolution neural network (CNN) variants based on Seg-Net and Res-Net architectures, characterized by their small number of trainable weights (nearly 800,000) while maintaining high estimation accuracy. The proposed models utilize the freely available data from Sentinel-2, and a digital surface model to estimate forest canopy heights with high accuracy and a spatial resolution of 10 metres. Various factors affect canopy height estimation, including topography signature, dataset diversity, input layers, and model structure. The proposed models are applied separately to two powerline regions located in the northern and southern parts of Thailand. The application results show that the proposed Encoder-Decoder CNN Seg-Net model presents an average mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination R 2 of 1.38 m, 1.85 m, and 0.87, respectively, and is nearly 4.8 times faster than the CNN Res-Net model in conversion. These results prove the proposed model's capability of estimating and monitoring canopy heights with high accuracy and fine spatial resolution. [ABSTRACT FROM AUTHOR]

The ability to measure the ecological effects of understory fire in the Amazon on a landscape scale remains a frontier in remote sensing. The Global Ecosystem Dynamics Investigation's (GEDI) LiDAR data have been widely suggested as a critical new tool in this field. In this paper, we use the GEDI Simulator to quantify the nuanced effects of understory fire in the Amazon, and assess the ability of on-orbit GEDI data to do the same. While numerous ecological studies have used simulated GEDI data, on-orbit constraint may limit ecological inference. This is the first study that we are aware of that directly compares methods using simulated and on-orbit GEDI data. Simulated GEDI data showed that fire effects varied nonlinearly through the canopy and then moved upward with time since burn. Given that fire effects peaked in the mid-canopy and were often on the scale of 2 to 3 m in height difference, it is unlikely that on-orbit GEDI data will have the sensitivity to detect these same changes. [ABSTRACT FROM AUTHOR]

For vegetation monitoring, it is crucial to understand which changes are caused by the measurement setup and which changes are true representations of vegetation dynamics. UAV–LiDAR offers great possibilities to measure vegetation structural parameters; however, UAV–LiDAR sensors are undergoing rapid developments, and the characteristics are expected to keep changing over the years, which will introduce data inter-operability issues. Therefore, it is important to determine whether datasets acquired by different UAV–LiDAR sensors can be interchanged and if changes through time can accurately be derived from UAV–LiDAR time series. With this study, we present insights into the magnitude of differences in derived forest metrics in savanna woodland when three different UAV–LiDAR systems are being used for data acquisition. Our findings show that all three systems can be used to derive plot characteristics such as canopy height, canopy cover, and gap fractions. However, there are clear differences between the metrics derived with different sensors, which are most apparent in the lower parts of the canopy. On an individual tree level, all UAV–LiDAR systems are able to accurately capture the tree height in a savanna woodland system, but significant differences occur when crown parameters are measured with different systems. Less precise systems result in underestimations of crown areas and crown volumes. When comparing UAV–LiDAR data of forest areas through time, it is important to be aware of these differences and ensure that data inter-operability issues do not influence the change analysis. In this paper, we want to stress that it is of utmost importance to realise this and take it into consideration when combining datasets obtained with different sensors. [ABSTRACT FROM AUTHOR]

With the publication of a Decree that has established a List of the Italian oldgrowth forests, we have analyzed, using text mining software, the state of the art of Italian research in this field. We have analyzed 188 ISI and 72 non-indexed papers or reports. The analysis has identified 165 locations of which more than 50% are on pure beech or mixed beech and silver fir stands. The analysis was focused mainly on structural characteristics and bio-indicators. The current knowledge represents reliable support for the establishment of an Italian network of old-growth forests and this green infrastructure offers important opportunities for research and collaboration between research, natural resource management, and local, regional, and state administrations. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Applied Ecology is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Synthetic aperture radar (SAR) tomography (TomoSAR) allows the reconstruction of the vertical distribution of the power backscattered by natural volumes by combining multiple SAR images acquired with slightly different incidence angles. Being a “radar” quantity, the profile depends on the radar frequency, polarization, and acquisition geometry, the 3-D distribution of the scattering elements and their dielectric properties. The characterization of each one of these factors is crucial to enable the extraction of physical 3-D structure attributes from TomoSAR profiles. The objective of this paper is to investigate how the vertical distribution of the backscattered power at L-band is affected by seasonal- and weather-induced changes. Radiometric (e.g., ground and volume powers) and geometric (e.g., center of mass of the volume-only profiles and phase centers of the volume scattering layers) parameters have been estimated under different weather and season conditions and compared. Then, TomoSAR data sets affected by dielectric nonstationarity (i.e., variability) have been considered in order to assess the invariance degree of each radiometric and geometric parameters. This analysis has been carried out by processing four L-band airborne TomoSAR data sets acquired before and after a rainfall and in spring and autumn over the Traunstein forest (south of Germany). [ABSTRACT FROM AUTHOR]

One-third of Germany's land surface area is covered by forest (around 11.4 million hectares), and thus, it characterizes the landscape. The forest is a habitat for a large number of animal and plant species, a source of raw materials, important for climate protection, and a well-being refuge for people, to name just a few of its many functions. During the annual forest condition surveys, the crown condition of German forests is assessed on the basis of field samples at fixed locations, as the crown condition of forest trees is considered an important indicator of their vitality. Since the start of the surveys in 1984, the mean crown defoliation of all tree species has increased, now averaging about 25% for all tree species. Additionally, it shows a strong rise in the rate of dieback. In 2019, the most significant changes were observed. Due to the drastic changes in recent years, efforts are being made to assess the situation of the forest using different remote sensing methods. There are now a number of freely available products provided to the public, and more will follow as a result of numerous projects in the context of earth-observation (EO)-based monitoring and mapping of the forests in Germany. In 2020, the situation regarding the use of remote sensing for the German forest was already investigated in more detail. However, these results no longer reflect the current situation. The changes of the last 3 years are the content of this publication. For this study, 84 citable research publications were thoroughly analyzed and compared with the situation in 2020. As a major result, we found a shift in the research focus towards disturbance monitoring and a tendency to cover larger areas, including national-scale studies. In addition to the review of the scientific literature, we also reviewed current research projects and related products. In congruence to the recent developments in terms of publications in scientific journals, these projects and products reflect the need for comprehensive, timely, large-area, and complementary EO-based information around forests expressed in multiple political programs. With this review, we provide an update of previous work and link it to current research activities. We conclude that there are still gaps between the information needs of forest managers who usually rely on information from field perspectives and the EO-based information products. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) remote sensing configurations are able to provide continuous measurements on global scales sensitive to the vertical structure of forests with a high spatial and temporal resolution. Furthermore, the development of tomographic SAR techniques allows the reconstruction of the three-dimensional (3-D) radar reflectivity opening the door for 3-D forest monitoring. However, the link between 3-D radar reflectivity and 3-D forest structure is not yet established. In this sense, this paper introduced a framework that allows a qualitative and quantitative interpretation of physical forest structure from tomographic SAR data at L-band. For this, forest structure is parameterized into a set of a horizontal and a vertical structure index. From inventory data, both indices can be derived from the spatial distribution and the dimensions of the trees. Similarly, two structure indices are derived from the 3-D spatial distribution of the local maxima of the reconstructed 3-D radar reflectivity profiles at L-band. The proposed methodology is tested by means of experimental tomographic L-band data acquired over the temperate forest site of Traunstein in Germany. The obtained horizontal and vertical structure indices are validated against the corresponding estimates obtained from inventory measurements and against the same indices derived from the vertical profiles of airborne Lidar data. The high correlation between the forest structure indices obtained from these three different data sources (expressed by correlation coefficients between 0.75 and 0.87) indicates the potential of the proposed framework. [ABSTRACT FROM AUTHOR]

Terrestrial lidar data are known to be useful for estimating the three‐dimensional (3D) distribution of leaf area in forests. This type of product holds great potential for modelling canopy reflectance and light interception to study the links between structure and function. However, little is currently known about its potential and limits in dense forests. Higher leaf area density implies that more laser pulses emitted by the ground‐based instrument are intercepted in lower canopy levels, and the implications of such occlusion effects on radiative transfer simulations are unknown. Occlusion effects can be minimized by increasing the number of locations lidar data is acquired from; how many locations are required for a forest with a given structure? This paper aims to address these knowledge gaps.We acquired terrestrial lidar data using a very high density of scanning positions (5 m between positions) over four dense forest 60 m × 60 m plots along a structural gradient. Occlusion effects were quantified, and the 3D distribution of leaf area density was mapped using voxels (cubic volumes) for four different scan densities (one original and three downsampled). The voxel arrays were then input into a radiative transfer model to simulate bidirectional reflectance factors and vertical fraction of absorbed radiation.We found that the summation of leaf area estimates for all voxels within the plot provided leaf area index (LAI) values close to LAI values estimated using traditional methods at each site. Occluded areas occurred mostly at the top of bottom heavy canopies. Radiative transfer simulations suggest that modelling small scale (<1 m) bidirectional reflectance factors (BRF) and light interception requires the highest scan position density used (5 m between scan positions), particularly at bottom heavy sites, and that 10 m between scan positions can be used for plot scale BRF simulations in forests with foliage density and vertical profiles similar to those tested here.This work establishes some initial guidelines for establishing terrestrial lidar survey protocols for mapping leaf area density in forests. The leaf area density voxel arrays derived are among the most accurate plot‐level 3D characterizations of foliage arrangement produced to date. [ABSTRACT FROM AUTHOR]

In this paper, we study the radar retrieval of soil moisture as well as canopy parameters in a range of boreal forests. The retrieval is formulated as an optimization problem where the difference between data and prediction of a forward scattering model is minimized. The forward model is a discrete scatterer radar model, and the optimization algorithm is a global optimization scheme known as simulated annealing. The inversion method is first applied to synthetic data assuming hypothetical allometric relationships to make the retrieval possible by reducing the number of unknown vegetation parameters. The inversion algorithm is then validated using the data acquired with the National Aeronautics and Space Administration (NASA)/Jet Propulsion Laboratory (JPL) Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) in June 2010 in central Canada boreal forests in support of the prelaunch calibration and validation activities of NASA's Soil Moisture Active and Passive (SMAP) mission. The inversion results for synthetic data show that the absolute retrieval error in soil moisture and relative retrieval error in canopy height are small, while the relative output error in trunk density could be large. The inversion results for actual field data show a great accuracy in soil moisture retrieval for Old Jack Pine and Young Jack Pine forests but show large retrieval errors for many of the radar pixels in the Old Black Spruce site. This paper shows that L-band radar is capable of retrieving surface soil moisture in forests with a high biomass where the forest structure allows soil moisture information to be carried by scattering mechanisms. [ABSTRACT FROM AUTHOR]

Many studies have focused on vegetation across forest edges to study impacts of edges created by human activities on forest structure and composition, or patterns of vegetation at inherent natural edges. Our objective was to create a database of plant‐related variables across different types of edges from various studies (mainly from across Canada, but also in Brazil and Belize) to facilitate edge research. We compiled data on vegetation along more than 300 transects perpendicular to forest edges adjacent to clear‐cuts, burned areas, bogs, lakes, barrens, insect disturbances, and riparian areas from 24 studies conducted over the past three decades. Data were compiled for more than 400 plant species and forest structure variables (e.g., trees, logs, canopy cover). All data were collected with a similar sampling design of quadrats along transects perpendicular to forest edges, but with varying numbers of transects and quadrats, and distances from the edge. The purpose for most of the studies was either to determine the distance of edge influence (edge width) or to explore the pattern of vegetation along the edge to interior gradient. We provide data tables for the cover of plant species and functional groups, the species and size of live and dead trees, the density of saplings, maximum height of functional groups and shrub species, and the cover of functional groups at different heights (vertical distribution of vegetation). The Forest Edge Research Network (FERN) database provides extensive data on many variables that can be used for further study including meta‐analyses and can assist in answering questions important to conservation efforts (e.g., how is distance of edge influence from created edges affected by different factors?). We plan to expand this database with subsequent studies from the authors and we invite others to contribute to make this a more global database. The data are released under a CC0 license. When using these data, we ask that you cite this data paper and any relevant publications listed in our metadata file. We also encourage you to contact the first author if you are planning to use or contribute to this database. [ABSTRACT FROM AUTHOR]

Boreal forests are characterized by a rather homogeneous stand structure that allows by means of a single allometric equation to estimate biomass from forest height with sufficient accuracy and, therefore, to use this equation for quantitative biomass classifications. In this paper, interferometric TanDEM-X DEM data are used to estimate forest height over boreal forest systems. The accuracy of the height inversion is evaluated for single- and dual-baseline scenarios, under summer and winter conditions. Then, an allometric equation is used to transfer forest height to biomass. For this, two forest sites, boreal (Krycklan) and hemi-boreal (Remningstorp) in north and southern Sweden, respectively, are investigated. A performance analysis is carried out to estimate the maximum number of biomass classes obtained, depending on the height estimation accuracy. For summer acquisitions, four biomass classes can be obtained, with a maximum biomass class of > 200 Mg/ha. For winter acquisitions or when a mixed summer—winter approach is applied, five biomass classes, up to 220 Mg/ha, can be obtained. This classification shows a good agreement with CORINE, an existing land cover classification, and can improve it by adding quantitative forest biomass classes with a high spatial resolution of 16 $\times$ 16 m. [ABSTRACT FROM AUTHOR]

Seasonal forests are characterized by seasonal dynamics that influence the growth and ecophysiology of forest species. Erythroxylum pauferrense is an understory species endemic to the Northeastern region of Brazil, with a distribution limited to Paraíba, Brazil. In this study, how the physiological characteristics of E. pauferrense vary in response to seasonal changes in an open ombrophilous forest of the Brazilian Atlantic Forest was investigated. Precipitation, air and soil temperature, and leaf area index were monitored and correlated with gas exchange, chlorophyll fluorescence, chlorophyll indices, and leaf morphofunctional attributes. The results show that E. pauferrense exhibits ecophysiological plasticity, adjusting its photosynthesis rates, stomatal conductance, and water use efficiency according to seasonal changes. During the rainy season, photosynthesis and stomatal conductance were higher than in the dry season, indicating more excellent photosynthetic activity due to increased water availability. Water use efficiency varied, with more efficient use in the dry season, which is crucial for survival in conditions of low water availability. Thus, this study contributes to understanding the ecology of endemic understory species in seasonal tropical forests, such as Erythroxylum pauferrense. [ABSTRACT FROM AUTHOR]

The accurate mapping of age structure and access to spatially explicit information are essential to optimal planning and policy-making for forest ecosystems, including forest management and sustainable economic development. Specifically, surveying and mapping the age structure of forests is crucial for calculating the carbon sequestration capacity of forest ecosystems. However, spatial heterogeneity and limited accessibility make forest age mapping in mountainous areas challenging. Here, we present a new workflow using ICESat-2 LiDAR data integrated with multisource remote sensing imagery to estimate forest age in Shangri-La, China. Two methods—a climate-driven exponential model and a random forest algorithm—are compared to infer the age structure of the five dominant species in Shangri-La. The climate-driven model, with an R2 of 0.67 and an RMSE of 12.79 years, outperforms the random forest model. The derived wall-to-wall forest age map at 30 m resolution reveals that nearly all forests in Shangri-La are mature or overmature, especially among the high-elevation species Abies fabri (Mast.) Craib and Picea asperata Mast., compared with Pinus yunnanensis Franch., Quercus aquifolioides Rehd. and E.H. Wils. and Pinus densata Mast., where the age structure is more evenly distributed across different elevation ranges. Younger forests are frequently found around human settlements and along the Jinsha River valley, whereas older forests are located in remote and high-elevation areas that are less disturbed. The combined use of active and passive remote sensing data has resulted in substantial improvements in the spatial detail and accuracy of wall-to-wall age mapping, which is expected to be a cost-effective approach for supporting forest management and carbon accounting in this important ecological region. The method developed here can be scaled to other mountain areas both to understand the age patterns and structure of mountain forests and to provide critical information for forestation, reforestation and carbon accounting in surface-to-high mountain areas, which are increasingly crucial for climate mitigation. [ABSTRACT FROM AUTHOR]

Forests play a significant role for maintaining the biodiversity. In order to manage sustainable forests, tree species history, distribution, and their future prospects are vital. Using standardized quantitative approaches, the age, radial growth, and size class distribution of Abies pindrow (Himalayan fir) were determined from three different al)titudinal sites (i.e. high, middle, and lower). The results indicate that Himalayan fir growing in the high-altitude site (Ayubia, 2 917 m a.s.l.) of moist temperate forests of the Himalayan mountains showed lower radial growth (0.13 cm) than in the middle (Bara Gali, 2 617 m a.s.l.; radial growth = 0.13 cm) and lower (Kuldana, 2 455 m a.s.l.; radial growth = 0.22 cm) altitude sites. Correlation analysis demonstrated that age showed a significant positive correlation (P < 0.001) with diameter at breast height. The tree-ring width chronology (totally 80 core samples) of Himalayan fir was developed from moist temperate forests of Himalayan mountains of Pakistan. At Ayubia site it possesses a long time)span (1703–2020 C.E.), followed by Bara Gali (1862–2020 C.E.) and Kuldana (1864–2020 C.E.). Further, the tree-ring width (TRW) chronology of Ayubia showed a significant positive correlation (P < 0.05) with May and June temperature, and a significant negative correlation (P < 0.05) with June and October precipitation, indicating that summer tempera)tures are the key factor for the radial growth of Himalayan fir. For the Kuldana site, the response of TRW chronology to temperature and precipitation was the same, however, it was significant only for June temperature at Bara Gali. The size class distribution of the high-altitude region (Ayubia) showed a higher number of individuals than the lower alti)tude region, indicating the lowest disturbance conditions. The absence of individuals in the early size classes and the gap in middle and mature size classes indicate a lower regeneration potential and anthropogenic impact. The pointer year analysis indicated that the Bara Gali forest is more sensitive to abnormal climate events than the other sites. Based on the present study, we suggest that proper attention and conservation strategy should be provided to Himalayan fir growing in the moist temperate forests of Pakistan. [ABSTRACT FROM AUTHOR]

The estimation of forest biomass from synthetic aperture radar (SAR) data is limited by the lack of forest structure information. Interferometric synthetic aperture radar (InSAR) provides a means for the extraction of forest structure. The crucial issue in InSAR application is to parameterize forest structure and to link the parameter with InSAR observations. Model-based analysis enables exploring the theoretical linkages between InSAR observations and forest structure free from temporal decorrelation effects. In this paper, a semicoherent model (SCSR) was first developed and verified. A series of simulations at L-band was then made for both homogeneous and heterogeneous forests generated from a forest growth model. The forest structure was parameterized by four height indices. Aside from the height of scattering phase center (HSPC), the depth of scattering phase center (DSPC) was also proposed to characterize the scattering phase center of InSAR. The results showed that the behavior of homogeneous forest on InSAR data was quite different from that of heterogeneous forest. Special care was needed when the retrieval algorithms of forest biomass developed on a homogeneous forest were applied to a heterogeneous forest. Crown size-weighted height (CWH) and Lorey's height were correlated with the HSPC at all polarizations and with the DSPC at copolarization in both cases of homogeneous and heterogeneous forests. These findings indicated that CWH could be an alternative biomass indicator of the Lorey's height for biomass estimation, which can be derived from the combination of InSAR data and the elevation of the forest canopy top from lidar or high-resolution stereo images. [ABSTRACT FROM PUBLISHER]

Synthetic aperture radar (SAR) tomography is a 3-D imaging modality that is commonly tackled by spectral estimation techniques. Thus, the backscattered power along the cross-range direction can be readily obtained by computing the Fourier spectrum of a stack of multibaseline measurements. In addition, recent work has addressed the tomographic inversion under the framework of compressed sensing, thereby recovering sparse cross-range profiles from a reduced set of measurements. This paper differs from previous publications, in that it focuses on sparse expansions in the wavelet domain while working with the second-order statistics of the corresponding multibaseline measurements. In this regard, we elaborate on the conditions under which this perspective is applicable to forested areas and discuss the possibility of optimizing the acquisition geometry. Finally, we compare this approach with traditional nonparametric ones and validate it by using fully polarimetric L-band data acquired by the Experimental SAR (E-SAR) sensor of the German Aerospace Center (DLR). [ABSTRACT FROM AUTHOR]

The aim of this paper is to compare L- and P-band vertical backscattering profiles estimated by means of synthetic aperture radar (SAR) tomography and full light detection and ranging (lidar) waveforms in terms of their ability to distinguish different tropical forest structure types. The comparison relies on the unique DLR F-SAR and NASA Land, Vegetation and Ice Sensor (LVIS) lidar datasets acquired in 2016 in the frame of the AfriSAR campaign. In particular, F-SAR and LVIS data over three different test sites complemented by plot field measurements are used. First, the SAR and lidar three-dimensional (3-D) datasets are compared and discussed on a qualitative basis. The ability to penetrate into and through the canopy down to the ground is assessed at L- and P-band in terms of both the ground-to-volume power ratio and the performance to estimate the location of the underlying ground. The effect of polarimetry on the visibility of the ground is discussed as well. Finally, the 3-D measurements for each configuration are compared with respect to their ability to derive physical forest structure descriptors. For this, vertical structure indices derived from the volume-only 3-D radar reflectivity at L- and P-band and from the LVIS profiles are compared against each other as well as against plot-derived indices. [ABSTRACT FROM AUTHOR]

Biodiversity is diminishing globally at an unprecedented rate in times of intensive land use and ongoing climate change. Since biodiversity is related to important ecosystem functions and services it is nowadays the goal by law to maintain and improve biodiversity. In this perspective, the BIOKLIMProject carried out two large forest structure and biodiversity surveys within the Bavarian Forest National Park in 2006 and 2016 to provide a broad range of data to assess the effects of a changing forest structure and climate on species and communities across different taxonomic groups. In this paper, we present the changes in forest structure between the two surveys. Results showed that study plots which were formerly affected from disruptive events such as storms and bark beetle infestations made progress in succession and thus occupy higher classes of forest succession. Furthermore, the results showed that disruptive events again caused disturbances, especially at the high elevations of the Bavarian Forest National Park. Hence, disturbances mainly affected spruce. Anyway, since the forest systems, with the exception of disturbances that might occur, are inert systems, the forest structure changed only slightly on the study plots between the two years of investigation. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar Tomography (TomoSAR) allows the reconstruction of the 3D reflectivity of natural volume scatterers such as forests, thus providing an opportunity to infer structure information in 3D. In this paper, the potential of TomoSAR data at L-band to monitor temporal variations of forest structure is addressed using simulated and experimental datasets. First, 3D reflectivity profiles were extracted by means of TomoSAR reconstruction based on a Compressive Sensing (CS) approach. Next, two complementary indices for the description of horizontal and vertical forest structure were defined and estimated by means of the distribution of local maxima of the reconstructed reflectivity profiles. To assess the sensitivity and consistency of the proposed methodology, variations of these indices for different types of forest changes in simulated as well as in real scenarios were analyzed and assessed against different sources of reference data: airborne Lidar measurements, high resolution optical images, and forest inventory data. The forest structure maps obtained indicated the potential to distinguish between different forest stages and the identification of different types of forest structure changes induced by logging, natural disturbance, or forest management. [ABSTRACT FROM AUTHOR]

Improving our ability to monitor fragmented tropical ecosystems is a critical step in supporting the stewardship of these complex landscapes. We investigated the structural characteristics of vegetation classes in Ucayali, Peru, employing a co‐production approach. The vegetation classes included three agricultural classes (mature oil palm, monocrop cacao, and agroforestry cacao plantations) and three forest regeneration classes (mature lowland forest, secondary lowland forest, and young lowland vegetation regrowth). We combined local knowledge with spaceborne lidar from NASA's Global Ecosystem Dynamics Investigation mission to classify vegetation and characterize the horizontal and vertical structure of each vegetation class. Mature lowland forest had consistently higher mean canopy height and lower canopy height variance than secondary lowland forest (μ = 29.40 m, sd = 6.89 m vs. μ = 20.82 m, sd = 9.15 m, respectively). The lower variance of mature forest could be attributed to the range of forest development ages in the secondary forest patches. However, secondary forests exhibited a similar vertical profile to mature forests, with each cumulative energy percentile increasing at similar rates. We also observed similar mean and standard deviations in relative height ratios (RH50/RH95) for mature forest, secondary forest, and oil palm even when removing the negative values from the relative height ratios and interpolating from above‐ground returns only (mean RH50/RH95 of 0.58, 0.54, and 0.53 for mature forest, secondary forest, and oil palm, respectively) (p <.0001). This pattern differed from our original expectations based on local knowledge and existing tropical forest succession studies, pointing to opportunities for future work. Our findings suggest that lidar‐based relative height metrics can complement local information and other remote sensing approaches that rely on optical imagery, which are limited by extensive cloud cover in the tropics. We show that characterizing ecosystem structure with a co‐production approach can support addressing both the technical and social challenges of monitoring and managing fragmented tropical landscapes. [ABSTRACT FROM AUTHOR]

Spending time in forests benefits human well‐being, but the importance of forest characteristics on well‐being is unclear. This knowledge could help guide forest management decisions to improve outcomes for both people and nature.The overall aim of this study was to investigate how psychological restoration, defined as psychological recovery processes in nature, may be supported by forest characteristics. We (1) investigated how perceptions of restoration (perceived restorativeness) were linked to specific forest characteristics. More specifically, we selected attributes included in nature protection legislation in Germany (beauty, diversity and uniqueness) as the basis to evaluate how forest characteristics were related to perceived restorativeness. Additionally, we (2) tested differences in the assessments of these attributes between forestry experts and people from the general public. Based on the results of the first two objectives (1, 2), we (3) predicted how forest management that affects forest characteristics may impact psychological restoration today and in the future.We developed a perceived restorativeness model based on attributes stated in the German Nature Conservation Act and specific forest structure variables. Drawing from the literature, we included perceived naturalness as an additional key predictor for restoration. Forestry experts and participants from the general public were then asked to rate computer‐generated forest stand pictures on these attributes and restorativeness.We found that all attributes were positively associated with perceived restorativeness, but perceived beauty was most important. Perceived uniqueness was statistically significant, but the strength of the relationship was weak. Mixed forests were rated as most beautiful, while coniferous forest stands were rated as least beautiful. The general public gave higher ratings than forestry experts on all attributes, but the pattern was similar. Based on participant ratings, forests left without management (Set‐aside), followed by forests with management aiming for resilience to climate change (Adaptation forestry), both supporting biodiversity conservation, showed the highest perceived restorativeness over the course of 100 years.Based on our results, it could be recommendable to increase forest diversity, especially in areas with many visitors. However, more nuanced knowledge involving diverse stakeholders is needed to inform forest management decisions on landscape level. Read the free Plain Language Summary for this article on the Journal blog. Read the free Plain Language Summary for this article on the Journal blog. [ABSTRACT FROM AUTHOR]

Assessing the dynamics of forest structure complexity is a critical task in times of global warming, biodiversity loss and increasing disturbances in order to ensure the resilience of forests. Recent studies on forest biodiversity and forest structure emphasize the essential functions of deadwood accumulation and diversification of light conditions for the enhancement of structural complexity. The implementation of an experimental patch‐network in managed broad‐leaved forests within Germany enables the standardized analysis of various aggregated and distributed treatments characterized through diverse deadwood and light structures. To monitor the dynamics of enhanced forest structure complexity as seasonal and trend components, dense time‐series from high spatial resolution imagery of Sentinel‐1 (Synthetic‐Aperture Radar, SAR) and Sentinel‐2 (multispectral) are analyzed in time‐series decomposition models (BEAST, Bayesian Estimator of Abrupt change, Seasonal change and Trend). Based on several spatial statistics and a comprehensive catalog on spectral indices, metrics from Sentinel‐1 (n = 84) and Sentinel‐2 (n = 903) are calculated at patch‐level. Metrics best identifying the treatment implementation event are assessed by change point dates and probability scores. Heterogeneity metrics of Sentinel‐1 VH and Sentinel‐2 NMDI (Normalized Multi‐band Drought Index) capture the treatment implementation event most accurately, with clear advantages for the identification of aggregated treatments. In addition, aggregated structures of downed or no deadwood can be characterized, as well as more complex standing structures, such as snags or habitat trees. To conclude, dense time‐series of complementary high spatial resolution sensors have the potential to assess various aggregated forest structure complexities, thus supporting the continuous monitoring of forest habitats and functioning over time. [ABSTRACT FROM AUTHOR]

In Japan, secondary forests associated with agriculture (satoyama) had been maintained traditionally by small-scale clearcutting and short-rotation coppice forestry. After forest management was discontinued due to modernization, shade-intolerant, deciduous trees such as Q. serrata and Q. variabilis have become dominant in many secondary forests of southwestern Japan. In recent years, however, tree death from Japanese oak wilt has become wide-spread. To identify forest communities that will be most affected by oak wilt, we investigated stand structure and species composition in a 64-ha unmanaged secondary forest in Kobe, Japan. We identified three forest communities using cluster analysis of 27 survey plots. We then analyzed and visualized vegetation similarity among the communities using non-metric multidimensional scaling (nMDS). In secondary forests, Pinus densiflora–Rhododendron macrosepalum and Quercus serrata–Quercus variabilis communities, which established after pine wilt were identified. We also found communities dominated by Cryptomeria japonica, a plantation species. We predicted that Quercus serrata–Quercus variabilis communities will experience significant vegetation change after oak wilt and become low-statured, evergreen-deciduous forests. These communities, therefore, should be prioritized for active management by small-scale clear cutting to prevent further spread of oak wilt and subsequent biodiversity decline. [ABSTRACT FROM AUTHOR]

Sea level rise (SLR) is causing vegetation regime shifts on both the seaward and landward sides of many coastal ecosystems, with the eastern coast of North America experiencing accelerated impacts due to land subsidence and the weakening of the Gulf Stream. Tidal wetland ecosystems, known for their significant carbon storage capacity, are crucial but vulnerable blue carbon habitats. Recent observations suggest that SLR rates may exceed the threshold for elevation gain primarily through vertical accretion in many coastal regions. Therefore, research has focused on mapping the upslope migration of marshes into suitable adjacent lands, as this landward gain may be the most salient process for estimating future wetland resiliency to accelerated rates of SLR. However, our understanding of coastal vegetation characteristics and dynamics in response to SLR is limited due to a lack of in situ data and effective mapping strategies for delineating the boundaries, or ecotones, of these complex coastal ecosystems. In order to effectively study these transitioning ecosystems, it is necessary to employ reliable and scalable landscape metrics that can differentiate between marsh and coastal forests. As such, integrating vegetation structure metrics from light detection and ranging (lidar) could enhance traditional mapping strategies compared to using optical data alone. Here, we used terrestrial laser scanning (TLS) to measure changes in forest structure along elevation gradients that may be indicative of degradation associated with increased inundation in the Delaware Bay estuary. We analyzed a set of TLS‐derived forest structure metrics to investigate their relationships with elevation, specifically seeking those that showed consistent change from the forest edge to the interior. Our findings revealed a consistent pattern between elevation and the plant area index (PAI), a metric that holds potential for enhancing the delineation of complex coastal ecosystem boundaries, particularly in relation to landward marsh migration. This work provides support for utilizing lidar‐derived forest structural metrics to enable a more accurate assessment of future marsh landscapes and the overall coastal carbon sink under accelerated SLR conditions. [ABSTRACT FROM AUTHOR]

The Brazilian Amazon forest and cerrado savanna encompasses a region of enormous ecological, climatic, and land-use variation. Satellite remote sensing is the only tractable means to measure the biophysical attributes of vegetation throughout this region, but coarse-resolution sensors cannot resolve the details of forest structure and land-cover change deemed critical to many land-use, ecological, and conservation-oriented studies. The Carnegie Landsat Analysis System (CLAS) was developed for studies of forest and savanna structural attributes using widely available Landsat Enhanced Thematic Mapper Plus (ETM+) satellite data and advanced methods in automated spectral mixture analysis. The methodology of the CLAS approach is presented along with a study of its sensitivity to atmospheric correction errors. CLAS is then applied to a mosaic of Landsat images spanning the years 1999–2001 as a proof of concept and capability for large-scale, very high resolution mapping of the Amazon and bordering cerrado savanna. A total of 197 images were analyzed for fractional photosynthetic vegetation (PV), nonphotosynthetic vegetation (NPV), and bare substrate covers using a probabilistic spectral mixture model. Results from areas without significant land use, clouds, cloud shadows, and water bodies were compiled by the Brazilian state and vegetation class to understand the baseline structural typology of forests and savannas using this new system. Conversion of the satellite-derived PV data to woody canopy gap fraction was made to highlight major differences by vegetation and ecosystem classes. The results indicate important differences in fractional photosynthetic cover and canopy gap fraction that can now be accounted for in future studies of land-cover change, ecological variability, and biogeochemical processes across the Amazon and bordering cerrado regions of Brazil. [ABSTRACT FROM AUTHOR]

Forests play a significant role in protecting people, settlements in mountainous terrains from hydrogeomorphic hazards, including shallow landslides. Although several studies have investigated the interactions between forests and slope instabilities, a full understanding of them has not yet been obtained. Additionally, models that incorporate forest stand properties into slope failure probability analyses have not been developed. In principle, physical-based models, which are powerful tools for landslide hazard analyses, represent an appropriate approach to linking stand properties and slope stability. However, the reliability of these models depends on numerous parameters that describe highly complex geotechnical and hydrological processes (e.g. potential failure depth, saturation ratio, root reinforcement, etc.) that are difficult to measure and model. In particular, the spatial heterogeneity of root reinforcement remains a problem, and the use of physically based models from a forest management perspective has been limited. This paper presents a procedure for assessing slope stability in terms of the Factor of Safety that accounts for forest stand characteristics such as tree density, average diameter at breast height and minimum distance between trees. The procedure combines a three-dimensional (3D) slope stability model with an evaluation of the variability of root reinforcement in terms of a probability distribution, according to forest characteristics. Monte Carlo simulation is used to account for the residual uncertainties in both stand characteristics and 3D stability model parameters. The proposed method was applied in a subalpine catchment in the Italian Alps, mainly covered by coniferous forest and characterized by steep slopes and high landslide risk. The results suggest that the procedure is highly reliable, according to landslide inventory maps [area under the ROC curve (AUC) is 0.82 and modified success rate (MSR) is 0.70]. Thus, it represents a promising tool for studying the role of root reinforcement in landslide hazard mapping and guiding forest management from a slope stability perspective. Copyright © 2017 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Forests are important to nutrient cycling, hydrology, climate and aesthetics in urban ecosystems. Effective forest management in urban environments requires detailed data on the spatial distribution and structure of urban forests, but the lidar which are best for mapping the complexity of these forests are often unavailable or prohibitively expensive for municipalities. However, leaf-off small footprint lidar originally collected for topographic mapping are increasingly available, and will soon become accessible to forest managers in the U.S. through 3DEP (3D Elevation Program). In this paper, we demonstrated the opportunistic use of existing leaf-off lidar to map forest structure and associated uncertainties in Madison, Wisconsin and neighboring municipalities. Using empirical models, we were able to map five structural variables and aboveground biomass with accuracies comparable to or better than other studies using comparable data and with errors generally <20 % of the data range. Highest uncertainties in our forest structure maps occurred in residential neighborhoods and along forest edges. From the results, we present maps of forest structure and, to our knowledge, first of a kind pixel-wise uncertainty maps for an urban area. These maps provide the basis for a spatially comprehensive assessment of forest resources and are effective for urban inventory and change assessment. For example, the maps enabled comprehensive comparison of carbon storage by urban trees among cities, with a range in our study of 1.2 kg/m to 5.6 kg/m, and with major variations due to differences in city development patterns and ages. [ABSTRACT FROM AUTHOR]