Search

The goal of this paper is to perform end-point impedance measurements across dominant and nondominant hands while doing airbrush painting and to use the results for developing a robotic assistance scheme. We study airbrush painting because it resembles in many ways manual welding, a standard industrial task. The experiments are performed with the 7 degrees of freedom KUKA lightweight robot arm. The robot is controlled in admittance using a force sensor attached at the end-point, so as to act as a free-mass and be passively guided by the human. For impedance measurements, a set of nine subjects perform 12 repetitions of airbrush painting, drawing a straight-line on a cartoon horizontally placed on a table, while passively moving the airbrush mounted on the robot’s end-point. We measure hand impedance during the painting task by generating sudden and brief external forces with the robot. The results show that on average the dominant hand displays larger impedance than the nondominant in the directions perpendicular to the painting line. We find the most significant difference in the damping values in these directions. Based on this observation, we develop a “directional damping” scheme for robotic assistance and conduct a pilot study with 12 subjects to contrast airbrush painting with and without robotic assistance. Results show significant improvement in precision with both dominant and nondominant hands when using robotic assistance. [ABSTRACT FROM PUBLISHER]

This paper presents a study of hand impedance measurements comparatively across ten professional and 14 novice manual welders, when they are performing tungsten inert gas (TIG) welding interactively with the KUKA lightweight robot arm (LWR). The results show that hand impedance differs across professional and novice welders. The welding torch is attached to the KUKA LWR, which is admittance controlled via a force sensor to give the feeling of a free floating mass at its end-effector. The subjects perform TIG welding on 1.5-mm-thick stainless steel plates by manipulating the torch. Impedance is measured by introducing external force disturbances and fitting a mass–damper–spring model to human hand reactions. The quality of welding is measured using the variance of the position signals above 0.1 Hz. Professional welders demonstrate less variance and, in general, apply larger hand impedance (larger damping and stiffness) than the novice welders. The variance of position during nominal welding is minimal for both professional and novice welders in the direction perpendicular to the welding line in the plane of the plate, which is the most important direction for the quality of the weld. For both professional and novice welders, the mass and damping values are largest in this direction compared with the other two directions. Professional welders demonstrate larger damping than the novice welders in this direction. [ABSTRACT FROM PUBLISHER]

This paper presents an approach for understanding the soft-tissue behavior in surface contact with a probe scanning the tissue. The application domain is confocal microlaparoscopy, mostly used for imaging the outer surface of the organs in the abdominal cavity. The probe is swept over the tissue to collect sequential images to obtain a large field of view with mosaicking. The problem we address is that the tissue also moves with the probe due to its softness; therefore, the resulting mosaic is not in the same shape and dimension as traversed by the probe. Our approach is inspired by the finger slip studies and adapts the idea of load-slip phenomenon that explains the movement of the soft part of the finger when dragged on a hard surface. We propose the concept of loading-distance and perform measurements on beef liver and chicken breast tissues. We propose a protocol to determine the loading-distance prior to an automated scan and introduce an approach to compensate the tissue movement in raster scans. Our implementation and experiments show that we can have an image mosaic of the tissue surface in a desired rectangular shape with this approach. [ABSTRACT FROM PUBLISHER]