Search

In food production sectors, food spoilage and contamination are major issues that threaten and negatively influence food standards and safety. Several physical, chemical, and biological methods are used to extend the shelf-life of food products, but they have their limitations. Henceforth, researchers and scientists resort to novel methods to resolve these existing issues. Nanomaterials-based extension of food shelf life has broad scope rendering a broad spectrum of activity including high antioxidant and antimicrobial activity. Numerous research investigations have been made to identify the possible roles of nanoparticles in food preservation. A wide range of nanomaterials via different approaches is ultimately applied for food preservation. Among them, chemically synthesized methods have several limitations, unlike biological synthesis. However, biological synthesis protocols are quite expensive and laborious. Predominant studies demonstrated that nanoparticles can protect fruits and vegetables by preventing microbial contamination. Though several nanomaterials designated for food preservation are available, detailed knowledge of the mechanism remains unclear. Hence, this review aims to highlight the various nanomaterials and their roles in increasing the shelf life of food products. Adding to the novel market trends, nano-packaging will open new frontiers and prospects for ensuring food safety and quality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The effects of surface coating, microbial loading, surface-to-volume ratio, sample stacking, mixing of samples with romaine lettuce, and shaking of the samples on the inactivation of Salmonella contaminating boiled chicken breast (BCB) cubes using in-package atmospheric dielectric barrier discharge cold plasma (ADCP) treatment at 38.7 kV were investigated. Whey protein coating increased the ADCP treatment efficacy in inactivating Salmonella on BCB cubes; the D-value increased from 0.2 to 1.3 min when the initial inoculum concentration increased from 3.8 to 5.7 log CFU/sample. ADCP decontaminated stacked BCB samples uniformly, and shaking during the treatment increased the inactivation rate. The concentrations of chicken protein isolate, water, and soybean oil in a chicken breast model food that resulted in the highest Salmonella reduction (1.7 log CFU/sample) were 20.5%, 68.9%, and 10.6%, respectively. ADCP treatment did not affect the color and tenderness of the model food, irrespective of its composition. The present study indicated that ADCP is a feasible technology to decontaminate prepackaged ready-to-eat meat cube products., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Gulfweed-based edible materials were developed in forms of food film and coating. Gulfweed suspension was subjected to high-pressure homogenization (HPH) at 103, 138, and 193 MPa with 1, 2, and 3 passes, and mixed with 14, 30, 50, and 70% (w/w gulfweed) glycerol and 1% (w/w gulfweed) polysorbate 20 to produce a film-forming suspension. The particle size of the suspension decreased with increasing pressure from 103 to 193 MPa and pass number from 1 to 3. The HPH-treated gulfweed suspension behaved like a pseudo-plastic non-Newtonian fluid. High pressure and pass number generally decreased the suspension viscosity. Uniformity and compactness of the films increased with increasing pressure. The optimal conditions for forming a film with high stretchability, low water vapor permeability, low and water solubility, as well as for preparing bright-colored coated smoked salmon, were found to be 193 MPa, three passes of HPH, and a glycerol concentration of 70%. Coating smoked salmon with gulfweed suspension enhanced the redness without altering its texture and volatile properties. The method reported in this study may be useful for seaweed-based edible film production, increasing their potential application to various food products like red meats. PRACTICAL APPLICATION: Seaweeds have high nutritional and functional values, but they are not commonly used as food materials owing to their appearance and size. Therefore, it is important to develop methods to utilize seaweeds by overcoming appearance and size limitations. A self-standing film/coating using gulfweed was developed in this study, making use of commercially available high-pressure homogenization technology. The method developed herein might enable increased applications of gulfweed and possibly other seaweeds to food products such as films, rolls, or coatings., (© 2018 Institute of Food Technologists®.)

Effects of dielectric barrier discharge atmospheric cold plasma (DACP) treatment on the inactivation of Salmonella and the storability of grape tomato were investigated. Grape tomatoes, with or without inoculation with Salmonella, were packaged in a polyethylene terephthalate (PET) commercial clamshell container and cold plasma-treated at 35 kV at 1.1 A for 3 min using a DACP system equipped with a pin-type high-voltage electrode. DACP treatment inactivated Salmonella (p < 0.05) without altering the color or firmness of the grape tomatoes (p > 0.05). DACP treatment inactivated Salmonella uniformly in both layers of the double-layer configuration of the grape tomatoes regardless of the position of the tomatoes in each layer. Salmonella was most efficiently inactivated when the headspace to tomato volume ratio of the container was highest. Integration of rolling of tomatoes during treatment significantly increased the Salmonella reduction rates from 0.9 ± 0.2 log CFU/tomato to 3.3 ± 0.5 log CFU/tomato in the double-layer configuration of the tomato samples. Rolling-integrated DACP also initially reduced the number of total mesophilic aerobic bacteria and yeast and molds in the double-layer configuration of tomato samples by 1.3 ± 0.3 and 1.5 ± 0.2 log CFU/tomato, respectively. DACP treatment effectively reduced the growth of Salmonella and indigenous microorganisms at 10 and 25 °C, and did not influence the surface color, firmness, weight loss, lycopene concentration and residual ascorbic acid of grape tomatoes during storage at 10 and 25 °C. DACP treatment holds promise as a post-packaging process for improving microbial safety against Salmonella and storability of fresh grape tomatoes., (Published by Elsevier Ltd.)

Films containing microencapsulated cinnamon oil (CO) were developed using a large-scale production system to protect against the Indian meal moth (Plodia interpunctella). CO at concentrations of 0%, 0.8%, or 1.7% (w/w ink mixture) was microencapsulated with polyvinyl alcohol. The microencapsulated CO emulsion was mixed with ink (47% or 59%, w/w) and thinner (20% or 25%, w/w) and coated on polypropylene (PP) films. The PP film was then laminated with a low-density polyethylene (LDPE) film on the coated side. The film with microencapsulated CO at 1.7% repelled P. interpunctella most effectively. Microencapsulation did not negatively affect insect repelling activity. The release rate of cinnamaldehyde, an active repellent, was lower when CO was microencapsulated than that in the absence of microencapsulation. Thermogravimetric analysis exhibited that microencapsulation prevented the volatilization of CO. The tensile strength, percentage elongation at break, elastic modulus, and water vapor permeability of the films indicated that microencapsulation did not affect the tensile and moisture barrier properties (P > 0.05). The results of this study suggest that effective films for the prevention of Indian meal moth invasion can be produced by the microencapsulation of CO using a large-scale film production system., Practical Application: Low-density polyethylene-laminated polypropylene films printed with ink incorporating microencapsulated cinnamon oil using a large-scale film production system effectively repelled Indian meal moth larvae. Without altering the tensile and moisture barrier properties of the film, microencapsulation resulted in the release of an active repellent for extended periods with a high thermal stability of cinnamon oil, enabling commercial film production at high temperatures. This anti-insect film system may have applications to other food-packaging films that use the same ink-printing platform., (© 2018 Institute of Food Technologists®.)

Dielectric barrier discharge atmospheric cold plasma (DACP) treatment was evaluated for the inactivation of Escherichia coli O157:H7, surface morphology, color, carbon dioxide generation, and weight loss of bulk Romaine lettuce in a commercial plastic clamshell container. The lettuce samples were packed in a model bulk packaging configuration (three rows with either 1, 3, 5, or 7 layers) in the container and treated by DACP (42.6 kV, 10 min). DACP treatment reduced the number of E. coli O157:H7 in the leaf samples in the 1-, 3-, and 5-layer configurations by 0.4-0.8 log CFU/g lettuce, with no significant correlation to the sample location (P > 0.05). In the largest bulk stacking with 7 layers, a greater degree of reduction (1.1 log CFU/g lettuce) was observed at the top layer, but shaking the container increased the uniformity of the inhibition. DACP did not significantly change the surface morphology, color, respiration rate, or weight loss of the samples, nor did these properties differ significantly according to their location in the bulk stack. DACP treatment inhibited E. coli O157:H7 on bulk lettuce in clamshell containers in a uniform manner, without affecting the physical and biological properties and thus holds promise as a post-packaging process for fresh and fresh-cut fruits and vegetables., (Published by Elsevier Ltd.)

The effects of cold plasma (CP) treatment on the physicochemical and biodegradable properties of polylactic acid (PLA) films were studied. The PLA films were exposed to CP for 40 min at 900 W and 667 Pa using oxygen as the plasma-forming gas. The tensile, optical, and dynamic mechanical thermal properties, surface morphology, printability, water contact angle, chemical structure, weight change, and biodegradability properties of the films were evaluated during storage for up to 56 d. The tensile and optical properties of the PLA films were not significantly affected by CP treatment (CPT; P > 0.05). The surface roughness and water contact angle of PLA films increased by CPT and further increased during storage for 56 d. The printability of the PLA films increased following CPT and remained stable throughout the storage period. CP-induced hydrophilicity was also sustained during the storage period. The PLA films lost 1.9% of their weight after CPT, but recovered 99.5% of this loss after 14 d in storage. Photodegradation, thermal, and microbial biodegradable properties of the films were significantly improved by CPT (P < 0.05). Accelerated biodegradation of CP-treated PLA sachets with and without cheese was observed in compost. These results demonstrate the potential of CPT for modifying the stiffness, water contact angle, and chemical structure of PLA films and improving the printability and biodegradability of the films for food packaging., (© 2015 Institute of Food Technologists®)

Unlabelled: Insect-resistant laminate films containing microencapsulated cinnamon oil (CO) were developed to protect food products from the Indian meal moth (Plodia interpunctella). CO microencapsulated with polyvinyl alcohol was incorporated with a printing ink and the ink mixture was applied to a low-density polyethylene (LDPE) film as an ink coating. The coated LDPE surface was laminated with a polypropylene film. The laminate film impeded the invasion of moth larvae and repelled the larvae. The periods of time during which cinnamaldehyde level in the film remained above a minimum repelling concentration, predicted from the concentration profile, were 21, 21, and 10 d for cookies, chocolate, and caramel, respectively. Coating with microencapsulated ink did not alter the tensile or barrier properties of the laminate film. Microencapsulation effectively prevented volatilization of CO. The laminate film can be produced by modern film manufacturing lines and applied to protect food from Indian meal moth damage., Practical Application: The LDPE-PP laminate film developed using microencapsulated cinnamon oil was effective to protect the model foods from the invasion of Indian meal moth larvae. The microencapsulated ink coating did not significantly change the tensile and barrier properties of the LDPE-PP laminate film, implying that replacement of the uncoated with coated laminate would not be an issue with current packaging equipment. The films showed the potential to be produced in commercial film production lines that usually involve high temperatures because of the improved thermal stability of cinnamon oil due to microencapsulation. The microencapsulated system may be extended to other food-packaging films for which the same ink-printing platform is used., (© 2014 Institute of Food Technologists®)

Background: Incorporation of ascorbic acid (AA) into whey protein isolate (WPI) films has been shown to increase the film's ability to protect foods from oxidation. The O₂-scavenging function of AA-WPI films could be triggered upon being placed in contact with food products. Several food-related factors hypothesized to act as triggering mechanisms for activating the O₂-scavenging function of AA-WPI films were investigated, including change of water activity (a(w)), pH and/or metal catalyst presence., Results: Rate of O₂ scavenging of AA-WPI films was observed to most closely follow first-order kinetics. The film a(w) level was found to control the O₂-scavenging rate. At high a(w) levels, O₂ scavenging occurred at a desirably rapid rate. Food models with pH 7.4 produced the fastest O₂-scavenging rate. The slowest rate at pH 3.0 was due to the lower concentration of O₂-sensitive ascorbate monoanion. The presence of Cu²⁺ accelerated AA oxidation at high a(w) level., Conclusion: The desirable activation of oxygen scavenging in AA-WPI film at high a(w) and neutral pH in the presence of metal catalyst suggests that such AA-WPI films can be used to protect foods that have the highest vulnerability to oxidation., (© 2013 Society of Chemical Industry.)

Unlabelled: Insect-resistant films containing a microencapsulated insect-repelling agent were developed to protect food products from the Indian meal moth (Plodia interpunctella). Cinnamon oil (CO), an insect repelling agent, was encapsulated with gum arabic, whey protein isolate (WPI)/maltodextrin (MD), or poly(vinyl alcohol) (PVA). A low-density polyethylene (LDPE) film was coated with an ink or a polypropylene (PP) solution that incorporated the microcapsules. The encapsulation efficiency values obtained with gum arabic, WPI/MD, and PVA were 90.4%, 94.6%, and 80.7%, respectively. The films containing a microcapsule emulsion of PVA and CO or incorporating a microcapsule powder of WPI/MD and CO were the most effective (P < 0.05) at repelling moth larvae. The release rate of cinnamaldehyde, an active repellent of cinnamaldehyde, in the PP was 23 times lower when cinnamaldehyde was microencapsulated. Coating with the microcapsules did not alter the tensile properties of the films. The invasion of larvae into cookies was prevented by the insect-repellent films, demonstrating potential for the films in insect-resistant packaging for food products., Practical Application: The insect-repelling effect of cinnamon oil incorporated into LDPE films was more effective with microencapsulation. The system developed in this research with LDPE film may also be extended to other food-packaging films where the same coating platform can be used. This platform is interchangeable and easy to use for the delivery of insect-repelling agents. The films can protect a wide variety of food products from invasion by the Indian meal moth., (© 2013 Institute of Food Technologists®)

Unlabelled: Edible biopolymer films were developed from gelatin extracted from trout skin (TSG) using thermal protein denaturation conditions and plasticizer (glycerol) concentration as variables. The amino acid composition of the TSG, elastic modulus, viscous modulus, and the viscosity of film-forming solutions, and tensile properties, water vapor permeability, solubility in water, and color of TSG-based films were determined. A 6.8% (w/w, wet basis) trout skin-extracted gelatin solution containing 9, 17, or 23% (w/w, dry basis) glycerol was heated at 80, 90, or 100 °C for 30, 45, or 60 min to prepare a film-forming solution. TSG can be characterized as a gelatin containing high contents of methionine and aspartic acid. The gelation temperature of the film-forming solution was 7 °C and the solution was subjected to heating to form a stable matrix for a film. Increased heating time of the film-forming solution reduced the film solubility (P < 0.05). Heating at 90 °C for 30 min was suggested as the requirement for film formation. As the concentration of glycerol in the film increased, film strength and moisture barrier properties decreased, while film stretchability increased (P < 0.05). Trout skin by-products can be used as a natural protein source for fabricating biopolymer films stable at ambient conditions with certain physical and moisture barrier properties by controlling thermal treatment conditions and glycerol concentrations., Practical Application: The fishing industry produces a significant amount of waste, including fish skin, due to fish processing. Trout skin waste has potential value as a protein source that can be used to form biopolymer edible films for packaging low and intermediate water activity food products, and thus may have practical applications in the food industry, which could be one way to cut waste disposal in the trout processing industry., (© 2012 Institute of Food Technologists®)

An antimicrobial edible film was developed from defatted mustard meal (Sinapis alba) (DMM), a byproduct from the bio-fuel industry, without incorporating external antimicrobials and its antimicrobial activity against Listeria monocytogenes and physical properties were investigated. The DMM colloidal solution consisting of 184 g water, 14 g DMM, and 2g glycerol was homogenized and incubated at 37°C for 0.2, 0.5, 24 or 48 h to prepare a film-forming solution. The pH of a portion of the film-forming solution (pH 5.5) was adjusted to 2.0 or 4.0. Films were formed by drying the film-forming solutions at 23°C for 48 h. The film-forming solution incubated for 48 h inhibited L. monocytogenes in broth and on agar media. Antimicrobial effects of the film prepared from the 48 h-incubated solution increased with decrease in pH of the solution from 5.5 to 2.0. The film from the film forming solution incubated for 48 h (pH 2.0) initially inhibited more than 4.0 log CFU/g of L. monocytogenes inoculated on film-coated salmon. The film-coating retarded the growth of L. monocytogenes in smoked salmon at 5, 10, and 15°C and the antimicrobial effect during storage was more noticeable when the coating was applied before inoculation than when it was applied after inoculation. The tensile strength, percentage elongation, solubility in watercxu, and water vapor permeability of the anti microbial film were 2.44 ± 0.19 MPa, 6.40 ± 1.13%, 3.19 ± 0.90%, and 3.18 ± 0.63 gmm/kPa hm(2), respectively. The antimicrobial DMM films have demonstrated a potential to be applied to foods as wraps or coatings to control the growth of L. monocytogenes., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The stability of ascorbic acid (AA) incorporated in whey protein isolate (WPI) film and the related color changes during storage were studied. No significant loss of AA content was found in any films prepared from pH 2.0 casting solution stored at 30% relative humidity (RH) and 22 °C over 84 days. Total visible color difference (ΔE*(ab)) of all films slowly increased over storage time. The ΔE*(ab) values of pH 3.5 films were significantly higher than those of pH 2.0 films. The stability of AA-WPI films was found to be mainly affected by the pH of the film-forming solution and storage temperature. Oxidative degradation of AA-WPI films followed Arrhenius behavior. Reduction of the casting solution pH to below the pK(a1) (4.04 at 25 °C) of AA effectively maintained AA-WPI storage stability by greatly reducing oxidative degradation, whereas anaerobic and nonenzymatic browning were insignificant. The half-life of pH 2.0 AA-WPI film at 30% RH and 22 °C was 520 days.

Biopolymer films were developed from apple peels of apple process co-products and their physical properties were determined. Apple peel-based films with glycerol (23%, 33%, and 44%[w/w, dry basis]) were prepared using high-pressure homogenization (HPH) at different levels of pressure (138, 172, and 207 MPa). An evaluation of the rheological properties (elastic modulus [G'], viscous modulus [G''], and viscosity) of the film-forming solutions was performed. For the apple peel films, the water sorption isotherms, the kinetics of water absorption, the water vapor permeability (WVP), the oxygen permeability (OP), and the tensile properties were determined. The G' and viscosity of the film-forming solutions decreased significantly with increasing processing pressure (P < 0.05). However, no difference was observed in G'' values at different homogenization pressures (P > 0.05). The viscosity decreased from 644 to 468 kPa.s as the pressure increased from 138 to 207 MPa at 90 degrees C. The monolayer water content of the apple peel films decreased with increasing content of glycerol from 23% to 33%. Further increase in glycerol content did not change the monolayer water content. The water diffusion coefficient of the films was highest at the intermediate level of glycerol content. The barrier properties (WVP and OP) of the films increased with increasing level of glycerol, while processing pressure did not influence the gas barrier properties. The films prepared at 207 MPa were less stiff and strong, but more stretchable than those prepared at 138 and 172 MPa.

ABSTRACT Microbial, physical and flavor qualities of pasteurized orange juice packaged in cylindrical 118-mL and 177-mL containers with the same bottom diameter and thickness but different wall heights and thickness were compared with study effects of the wall thickness of the containers on the qualities. The 118-mL or 177-mL containers were thermoformed from a laminated package using the same amount of the material. Thermoforming conditions for forming 118-mL containers were optimized: 154C forming temperature, 103.2-s heating time and 0.25-MPa forming pressure. Resulting containers were compared with 177-mL containers for which optimized forming conditions had been previously determined. Significantly smaller numbers of aerobic microorganisms were counted and longer retentions of color and flavors were obtained by the 118-mL containers. A greater wall thickness of 118-mL containers might allow less oxygen transmission to orange juice, which could reduce the rates of the microbial growth, color change and flavor degradation in the juice. PRACTICAL APPLICATIONS This article may provide useful insights about a packaging manufacturing process from a technical point of view, the optimization of thermoforming operation, leading to some important points related to a possible shelf life extension. It demonstrates how critical packaging reduction can be using the same amount of packaging material to produce a larger container for a larger amount of product on the consequences on the shelf life. [ABSTRACT FROM AUTHOR]

Abstract Effects of packaging parameters on the inactivation of Salmonella contaminating mixed vegetables in plastic packages using atmospheric dielectric barrier discharge cold plasma treatment (ADCPT) were investigated. The inactivation rate of indigenous aerobes of grape tomatoes in low density polyethylene packaging (1.2 log CFU/tomato) was higher than that in polyethylene terephthalate packaging (0.8 log CFU/tomato). Increasing oxygen concentration in the package headspace by 85% did not affect the Salmonella reduction rate. However, an increase in the volume ratio of headspace to sample from 30:1 to 43:1, a change from indirect treatment to direct treatment, and the use of secondary packaging led to an increase in the Salmonella reduction rates by 1.2, 2.3, and 0.7 log CFU/tomato, respectively. The water vapor permeability of the tested packages increased after ADCPT by 16.7–41.7%, while tensile properties, transparency, glass transition temperature, and surface morphology did not change. Differences in inactivation effects according to package shape were eliminated by shaking during treatment. The results demonstrated the packaging parameter-dependent efficacy of in-package ADCPT and effective ADCPT for mixed vegetable decontamination with minimal package property modification. Highlights • Atmospheric cold plasma (ACP) decontaminates mixed vegetables in plastic containers. • Effective container parameters include the kinds of plastics and package shape. • Effective treatment parameters are container shaking and sample–electrode distance. • Other key parameters are secondary packaging and headspace-sample volume ratio. [ABSTRACT FROM AUTHOR]

This study investigated the effects of cold plasma treatment (CPT) using various plasma-forming gases on the physical properties of defatted soybean meal (DSM)-based edible film (DSM film). The effect of packaging smoked salmon using a cold plasma (CP)-treated DSM film on the storage stability of salmon was also evaluated. DSM film was formed by casting film-forming solutions (DSM/glycerol at a ratio of 10:3) prepared by high-pressure (172 MPa) homogenization. Among the O 2 -, N 2 -, air-, He- and Ar-CPTs, Ar-CPT, which increased elongation and lightness of the DSM film, was optimized against tensile strength, elongation, and water vapor permeability using a response surface analysis. Optimal plasma generation time and power were predicted as 15 min and 400 W, respectively. The tensile strength, elongation, and moisture barrier property of DSM film increased by 6.8%, 13.4%, and 24.4%, respectively, after CPT at optimal conditions. The CPT formed DSM film that decomposed easily and retarded lipid oxidation and hardness reduction of smoked salmon during storage at 4 °C. The results from this study suggest the use of CPT for improving the applicability of DSM film in food packaging. [ABSTRACT FROM AUTHOR]