Search

Mycotoxins produced from Aspergillus, Penicillium, and Fusarium cause food spoilages during handling and storage, owing to immense economic losses and serious human health concerns including immunosuppression and carcinogenic effects. Furthermore, these species are also known to produce mycotoxins. Aflatoxin B1 (AFB1), zearalenone (ZEA), ochratoxin A (OTA), and deoxynivalenol (DON) are the most commonly occurring mycotoxins. The removal of mycotoxins from the contaminated feed using lactic acid bacterias (LABs) has been proposed as a green, inexpensive, safe, and promising mycotoxin decontamination strategy. LABs can control fungal growth by secreting antimicrobial compounds out of their cell wall, thus employing lactobacilli defense mechanisms to destroy bacterial and fungal cells. This article provides systematic review of LABs as bio-green preservative anti-mycotoxin for sustainable food safety.

Previously proso-millet, considered an underutilized cereal, has drawn considerable attention due to health benefits like good nutritional profile, low glycemic index, and gluten-free. The present review discusses starch extractability, structural characteristics, morphology, and physicochemical properties. Starch properties mainly depend on the amylose and amylopectin composition and distribution of brained chains. A very diverse starch structure and morphology were observed among the waxy and non-waxy cultivars. The amylose content ranged from 0.75 to 28.3% in many varieties, but exceptionally Hongmeizi variety showed a 32.3% as per the reported evidence. There are a positive correlation between the amylose content and cooking quality, thermal and pasting properties. The size and shape of smallest to largest starch granules varied between 0.3 and 17 μm and round to polygonal, respectively. The non-waxy starch varieties of proso-millet are widely used in food processing due to high resistance to swelling during heat treatment. Few food applications of proso-millet are bakery products like gluten-free bread, porridge, pasta, ready-to-eat breakfast cereals, infant foods, and distilleries. We can conclude that proso millet is an alternative to existing starch for its quality characteristics and provides insight to many food processing industries.

Lotus is a member of a small family of Nelumbonaceae and is regarded as a sacred flower grown as a freshwater aquatic plant. All plant parts are utilized as food and medicine. Lotus seed (LS) is an important part of the lotus plant due to its nutritional and bioactive components. The presence of phenolic compounds imparts numerous bioactivities to the LS extracts. Nutritional composition is considered crucial for evaluating new ingredients for food applications. Hence, the review deals with the nutritional composition of the LS and bioactivities of LS extracts, viz., anti-cancer, anti-proliferation, anti-diabetic, anti-inflammatory, neuroprotective, antioxidant, and immunomodulatory action. LS also possesses a significant amount of industrially important components which are beneficial for the formulation of food products. The overall profile of the lotus seed makes them potential nutraceutical and bioactive food ingredients. Utilizing this low-cost horticultural waste for producing value-added products is a novel step in its sustainable utilization. The article aimed to comprehensively collate some of the vital information published on lotus seeds incurred in the agri-food sector and critically discussing the potentiality of tapping bioactive compounds from lotus seeds considered as wastes and/or by-products in the entire agriculture-based food sector.

Due to its good dietary role, barley has attracted a growing amount of interest for the manufacture of functional foods in recent years. In barley, a number of bioactive components, including as phenolic compounds, have been discovered, and barley extrudates could be used to formulate various processed foods, including ready-to-eat cereals, baby, and pet foods and support nutritionally balanced diets. This study was conducted to investigate the effect of extrusion processing on resistant starch (RS), glycemic index (GI), and antioxidant compounds of barley flour. The L* and ΔE values of barley flours decreased significantly (p < 0.05) after extrusion is done at 150 and 180°C. The a* and b* values, however, increased after extrusion. Extrusion increased antioxidant activity (AOA), metal chelating activity (MCA), and ABTS+ scavenging activity, whereas total phenolic content (TPC) and total flavonoids content (TFC) decreased. Barley extrudates at 150 and 180°C showed decreased TPC by 16.4–34.2% and 23.4–38.1%. Moreover, improved RS and reduced GI values were recorded for barley extrudates as compared to barley non-extrudates. Therefore, extrusion of barley could be an alternative to produce pregelatinized barley flour with improved RS low GI values and improved antioxidant potential.

In this study, cross-linked pearl millet starch and fenugreek oil was used to develop active starch edible films to overcome the limitations of native starch and to substitute artificial preservatives with natural one. The starch was cross-linked at three levels (1%, 3% and 5%) using sodium trimetaphosphate (STMP), and physicochemical properties were studied. Moreover, a comparative study was conducted among four samples of films prepared using native starch, cross-linked starch, and native and cross-linked starch loaded with fenugreek oil for physical, thermal, mechanical, morphological, and antibacterial properties. The solubility, swelling, and amylose content of native and modified starch varied from 11.25–12.75%, 12.91–15.10 g/g, and 8.97–16.55%, respectively. The values of these parameters were reduced as the concentration of STMP increased. Cross-linked starch films showed lower moisture, solubility, water vapor permeability(WVP), and elongation at break (EB) values while having higher thickness, opacity, thermal, and tensile strength values. The microscopic images of cross-linked starch films showed smooth surfaces and the absence of ridges, pores, and cracks. The films loaded with fenugreek oil showed different results; the moisture content, water solubility, and tensile strength were decreased while thickness, opacity, WVP, and EB were increased. The onset temperature and peak temperature were lower, while enthalpy of gelatinization was increased to a greater extent than films without oil. The addition of fenugreek oil to films showed a good inhibition area of 40.22% for native+oil films and 41.53% for cross-linked+oil films % against Escherichia coli. This study confirmed the successful utilization of fenugreek oil as a very effective antimicrobial agent in preparing edible films.

Litchi (Litchi chinensis) seeds are discerned as the primary waste by-products produced after processing of litchi fruit into beverages, jellies, wine, and squash. These seeds are a rich source of complex polysaccharides, out of with 40% are constituted by starch. This starch exhibits certain unique functional and structural properties which are ascribed to its low amylose and high amylopectin content. These distinct functional food properties include (swelling power, water holding capacity, solubility) and micromeritic properties (Hausner's ratio, Carr's index, and angle of repose). These properties ascertain their application both in food (thickener, edible packaging, functional ingredient) and non-food (excipient in pharmaceutical products, targeted drug delivery) products. Utilization of starch from litchi seed can improve the economic feasibility of litchi processing industry and also help in preventing the waste accumulation and environmental pollution. This review article explores the litchi seed starch isolation, its structure, functional properties and diversified novel applications.

Many plants and fruits are rich in antioxidant and antimicrobial compounds, such as phenolic compounds. Watermelon is one example, as various parts of the fruit present interesting phytochemical profiles. This study demonstrates that a natural C.&nbsp, colocynthis (watermelon) (W) skin sap (SS) extract can effectively improve the oxidative stability of microencapsulated soybean (SB) oil. By employing a combination of alginate–xanthan gums (AXG) in a matrix hydrogel bead model with WSS extract, high encapsulation efficiency can be obtained (86%). The effects of process variables on the ultrasound-assisted extraction (UAE) of phenolic compounds from watermelon (W) skin sap (SS) using the response surface methodology (RSM), as an optimized and efficient extraction process, are compared with the effects of a conventional extraction method, namely the percolation method. The WSS extracts are obtained via UAE and RSM or the conventional percolation extraction method. The two obtained extracts and synthetic antioxidant butylated hydroxytolune (BHT) are added to SB oil separately and their antioxidant effects are tested and compared. The results show the improved oxidative stability of SB oil containing the extract obtained via the optimized method (20–30%) compared to the SB oil samples containing extract obtained via the percolation extraction method, synthetic antioxidant (BHT), and SB oil only as the control (no antioxidant added). According to existing studies, we assume that the use of WSS as an effective antioxidant will ensure the prolonged stability of encapsulated SB oil in hydrogel beads, as it is well known that extended storage under different conditions may lead to severe lipid oxidation.

The aim of current study is to provide a significant traditional knowledge on wild medicines used for ethnoveterinary purposes in the rural area of Maraog region in district Shimla. The medicinal plants have played a significant role in the treatment of human as well as animal’s diseases. The rural people of the Maraog region were interviewed through a questionnaire and extensive field surveys were conducted from June 2020 to July 2021. The discussion, observations and interviews were conducted in study site and included 96 informants. The information gathered from the residents is presented in a table format and includes scientific and local names, different parts used, diseases treated and mode administration. The most commonly used taxa are calculated with used value. The study revealed 100 plants in which trees (7), shrubs (26), herbs (56), ferns (5), grasses (3) and climbers (3) were identified. The most commonly documented livestock diseases were found to be hoof infections, eyes infections, poisoning and skin infections. In the current study, the Rosaceae family was reported as being the highest number (11), followed by Asteraceae (10) and then Lamiaceae (6). It was found that leaves, roots, flowers and fruits are the commonly used parts for ethnoveterinary medications. The phytochemicals present in the plant, such as alkaloids, sterols, glycosides, flavonoids, lignin, coumarins and terpenoids, etc., may be responsible for their medicinal properties. In this documentation, it was observed that the younger generation does not have good knowledge of medicinal plants as compared to the older ones. Therefore, it is necessary to preserve the traditional knowledge of these medicinal plants before their permanent loss. The documentation and conservation of medicinal plants can be a good start for novel phytopharmacological research in the veterinary field.

The present investigation searches for functional and antioxidant properties in proso millet starch and films. Proso millet starch was studied for its physical, chemical, morphological, and antioxidant properties. Furthermore, films were prepared from proso millet starch (native) and a starch–ĸ-carrageenan blend. Both films were characterized for moisture content, thickness, water-solubility, opacity, water vapor permeability, and textural and antioxidant properties. The amylose content, water absorption capacity, swelling, and solubility power of the proso millet starch were 19.19%, 87.5%, 15.32%, and 19%, respectively. Compared to aqueous extracts (0.68 mg GAE/g and 0.36 mg AAE/g), the total phenolics and total antioxidant capacity were observed to be higher in methanolic starch extracts (0.75 mg GAE/g and 0.41 mg AAE/g). Methanol extracts of native starch-based films showed higher antioxidant activity than the film prepared using a ĸ-carrageenan blend. The water vapor permeability and solubility of films prepared from native starch (2.38 g/Pa·s·m2 and 28%) were lower than those prepared using the ĸ-carrageenan blend (3.19 g/Pa·s·m2 and 42.05%). The findings may be of commercial interest to pharmaceutical and food industries in producing new antioxidant-rich drugs and food products.

Garlic (Allium sativa L.) is a bulbous flowering plant belongs to the family of Amaryllidaceae and is a predominant horticultural crop originating from central Asia. Garlic and its products are chiefly used for culinary and therapeutic purposes in many countries. Bulbs of raw garlic have been investigated for their role in oral health, which are ascribed to a myriad of biologically active compounds such as alliin, allicin, methiin, S-allylcysteine (SAC), diallyl sulfide (DAS), S-ally-mercapto cysteine (SAMC), diallyl disulphide (DADS), diallyl trisulfide (DATS) and methyl allyl disulphide. A systematic review was conducted following the PRISMA statement. Scopus, PubMed, Clinicaltrials.gov, and Science direct databases were searched between 12 April 2021 to 4 September 2021. A total of 148 studies were included and the qualitative synthesis phytochemical profile of GE, biological activities, therapeutic applications of garlic extract (GE) in oral health care system, and its mechanism of action in curing various oral pathologies have been discussed. Furthermore, the safety of incorporation of GE as food supplements is also critically discussed. To conclude, GE could conceivably make a treatment recourse for patients suffering from diverse oral diseases.

Pearl millet starch was modified using epichlorohydrin (EPI) at different concentrations (0.1%, 0.3%, 0.5%, and 0.8%) and evaluated for physicochemical, rheological, in vitro digestibility, and film-forming characteristics. The degree of cross-linking was observed at higher levels (0.5% and 0.8%) of EPI. Upon cross-linking, breakdown and setback viscosity reduced whereas pasting temperature was increased. Storage modulus (G′) and loss modulus (G″) value of cross-linked (CL) starches ranged between 2877 to 5744 Pa and 168 to 237 Pa, respectively, during the frequency sweep test. A drastic decrease was observed for steady shear (yield stress and consistency index) characteristics of CL starches. Resistant starch (RS) content was increased after starch modification, which imparts its nutritional values and starch modified at 0.8% had the highest RS content. Modifications of starch at different levels had significant effects on the moisture, opacity, solubility and mechanical properties of films. Outcomes of this study will be helpful to understand the properties of native and CL starches for their potential applications in preparation of edible films.

The accumulation of high amounts of petro-based plastics is a growing environmental devastation issue, leading to the urgent need to innovate eco-safe packaging materials at an equivalent cost to save the environment. Among different substitutes, starch-based types and their blends with biopolymers are considered an innovative and smart material alternative for petrol-based polymers because of their abundance, low cost, biodegradability, high biocompatibility, and better-quality film-forming and improved mechanical characteristics. Furthermore, starch is a valuable, sustainable food packaging material. The rising and growing importance of designing starch-based films from various sources for sustainable food packaging purposes is ongoing research. Research on “starch food packaging” is still at the beginning, based on the few studies published in the last decade in Web of Science. Additionally, the functionality of starch-based biodegradable substances is technically a challenge. It can be improved by starch modification, blending starch with other biopolymers or additives, and using novel preparation techniques. Starch-based films have been applied to packaging various foods, such as fruits and vegetables, bakery goods, and meat, indicating good prospects for commercial utilization. The current review will give a critical snapshot of starch-based films’ properties and potential applicability in the sustainable smart (active and intelligent) new packaging concepts and discuss new challenges and opportunities for starch bio composites.

Millets are an underutilized and important drought-resistant crop, which are mainly used for animal feed. The major constituent in millet is starch (70%), millet starch represents an alternative source of starches like maize, rice, potato, etc. This encouraged us to isolate and characterize the starches from different millet sources and to evaluate the application of these starches in edible film preparation. In the present study, the physicochemical, morphological, and film-forming characteristics of millet starches were studied. The amylose content, swelling power, and solubility of millet starches ranged from 11.01% to 16.61%, 14.43 to 18.83 g/g, and 15.2% to 25.9%, respectively. Significant differences (p &lt, 0.05) were found with different pasting parameters, and the highest peak (2985 cP), breakdown (1618 cP), and final viscosity (3665 cP) were observed for barnyard, proso, and finger millet starch, respectively. Little millet starch achieved the highest pasting temperature. All starches showed A-type crystalline patterns, and relative crystallinity was observed at levels of 24.73% to 32.62%, with proso millet starch achieving the highest value. The light transmittance of starches varied from 3.3% to 5.2%, with proso millet starch showing the highest transparency. Significant differences (p &lt, 0.05) were observed in the water solubility, thickness, opacity and mechanical characteristics of films. The results of the present study facilitate a better assessment of the functional characteristics of millet starches for their possible applications in the preparation of starch films.

Pearl millet is an underutilized and drought-resistant crop that is mainly used for animal feed and fodder. Starch (70%) is the main constituent of the pearl millet grain, this starch may be a good substitute for major sources of starch such as corn, rice, potatoes, etc. Starch was isolated from pearl millet grains and modified with different physical treatments (heat-moisture (HMT), microwave (MT), and sonication treatment (ST)). The amylose content and swelling capacity of the starches decreased after HMT and MT, while the reverse was observed for ST. Transition temperatures (onset (To), peak of gelatinization (Tp), and conclusion (Tc)) of the starches ranged from 62.92–76.16 °C, 67.95–81.05 °C, and 73.78–84.50 °C, respectively. After modification (HMT, MT, and ST), an increase in the transition temperatures was observed. Peak-viscosity of the native starch was observed to be 995 mPa.s., which was higher than the starch modified with HMT and MT. Rheological characteristics (storage modulus (G′) and loss modulus (G′′)) of the native and modified starches differed from 1039 to 1730 Pa and 83 to 94 Pa, the largest value was found for starch treated with ST and HMT. SEM showed cracks and holes on granule surfaces after HMT as well as MT starch granules. Films were prepared using both native and modified starches. The modification of the starches with different treatments had a significant impact on the moisture, transmittance, and solubility of films. The findings of this study will provide a better understanding of the functional properties of pearl millet starch for its possible utilization in film formation.

Pearl millet starches were modified at pH 8.0 using 3.0% octenyl succinic anhydride (OSA), and their pasting, rheological properties, and in vitro digestibility were analyzed. The degree of substitution (D.C.) of OSA-modified starches varied from 0.010 to 0.025. The amylose content decreased after modification, while the reverse was observed for swelling power. After OSA modification, the pasting viscosities (peak, trough, setback (cP)) of the modified starches increased compared to their native counterparts. G′ (storage modulus) and G″ (loss modulus) decreased significantly (p < 0.05) compared to their native counterparts during heating. Yield stress (σo), consistency (K), and flow behavior index (n) varied from 9.8 to 87.2 Pa, 30.4 to 91.0 Pa.s., and 0.25 to 0.47, respectively. For starch pastes, steady shear properties showed n < 1, indicating shear-thinning and pseudoplastic behavior. The readily digestible starch (RDS) and slowly digestible starch (SDS) contents decreased, while the resistant starch (R.S.) content increased. After OSA treatment, the solubility power of the starches increased; this property of OSA starches speeds up the biodegradability process for the films, and it helps to maintain a healthy environment.

Post-harvest spoilage and toxicity of food products mainly occur by fungi, including Aspergillus, Penicillium, and Fusarium resulting in massive economic losses globally. Additionally, fungi produce an enormous number of allergenic spores and mycotoxins associated with human health issues. The inhibition of fungal growth in the cereal grain, foodstuff, and storage and reduction of food safety hazards are of utmost importance. Thus, the interest in the involvement of bacteria or their antimicrobial active metabolites for bio-protection properties has increased. Lactic acid bacteria (LAB) that present a wide range of genera are a broad class of Gram-positive, acid-tolerant, and immotile organisms. The LABs have a great potential for food bio-preservation since most LABs are GRAS, and they naturally dominate the microbiota of most of the foods. The LABs can control fungal growth by secreting antimicrobial compounds from the cell wall of the lactobacilli defense system to destroy the bacterial and fungal cells. Additionally, LABs are key ingredients of culture starters in the food industries to produce aroma, flavor, texture, color and prolong the shelf life. Therefore, this review is about the recent antifungal potential, mechanism of LABs against mycotoxin, and their potential use in various food applications against fungal contamination.