Search

A number of studies have demonstrated a strong association between the antioxidant properties of rosemary polyphenols and their chemoprotective activity. However, the prooxidant effects of rosemary polyphenols have been rarely reported. In this work, a foodomics study is performed to investigate the in vitro autooxidation of carnosic acid (CA), carnosol (CS) and a polyphenol-enriched rosemary extract (SC-RE) in cell culture conditions. The results revealed that rosemary polyphenols autooxidation in culture medium generated H2 O2 at different rates. Generated H2 O2 levels by SC-RE and CA, but not CS, were correlated with intracellular reactive oxygen species (ROS) generation in HT-29 cells, and were partially involved in their anti-proliferative effect in this cell line. These compounds also induced different effects on glutathione metabolism. Results also indicated that high extracellular H2 O2 concentrations, resulting of using high (45 μg/mL) SC-RE concentration in culture media, exerted some artifactual effects related with cell cycle, but they did not influence the expression of relevant molecular biomarkers of stress., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In several metabolomic studies, it has already been demonstrated that capillary electrophoresis hyphenated to mass spectrometry (CE-MS) can detect an important group of highly polar and ionized metabolites that are overseen by techniques such as NMR, LC-MS and GC-MS, providing complementary information. In this work, we present a strategy for anionic metabolite profiling by CE-MS using a cationic capillary coating. The polymer, abbreviated as PTH, is composed of a poly-(N,N,N',N'-tetraethyldiethylenetriamine, N-(2-hydroxypropyl) methacrylamide, TEDETAMA-co-HPMA (50:50) copolymer. A CE-MS method based on PTH-coating was optimized for the analysis of a group of 16 standard anionic metabolites. Separation was achieved within 12min, with high separation efficiency (up to 92,000 theoretical plates per meter), and good repeatability, namely, relative standard deviation values for migration times and peak areas were below 0.2 and 2.1%, respectively. The optimized method allowed the detection of 87 metabolites in orange juice and 142 metabolites in red wine, demonstrating the good possibilities of this strategy for metabolomic applications., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Quality and safety assessment as well as the evaluation of other nutritional and functional properties of foods imply the use of robust, efficient, sensitive, and cost-effective analytical methodologies. Among analytical technologies used in the fields of food analysis and foodomics, capillary electrophoresis (CE) has generated great interest for the analyses of a large number of compounds due to its high separation efficiency, extremely small sample and reagent requirements, and rapid analysis. The introductory section of this chapter provides an overview of the recent applications of capillary electrophoresis (CE) in food analysis and foodomics. Relevant reviews and research articles on these topics are tabulated including papers published in the period 2011-2014. In addition, to illustrate the great capabilities of CE in foodomics the chapter describes the main experimental points to be taken into consideration for a metabolomic study of the antiproliferative effect of carnosic acid (a natural diterpene found in rosemary) against HT-29 human colon cancer cells.

This review work presents and discusses the main applications of capillary electromigration methods in food analysis and Foodomics. Papers that were published during the period February 2013-February 2015 are included following the previous review by Garcia-Cañas et al. (Electrophoresis, 2014, 35, 147-169). Analysis by CE of a large variety of food-related molecules with different chemical properties, including amino acids, hazardous amines, peptides, proteins, phenols, polyphenols, lipids, carbohydrates, DNAs, vitamins, toxins, contaminants, pesticides, residues, food additives, as well as small organic and inorganic compounds. This work includes recent results on food quality and safety, nutritional value, storage, bioactivity, as well as applications of CE for monitoring food processing. The use, among other CE developments, of microchips, CE-MS, and chiral CE in food analysis and Foodomics is also discussed., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Foodomics has been defined as a global discipline in which advanced analytical techniques and bioinformatics are combined to address different questions in food science and nutrition. There is a growing number of works on the development and application of non-targeted omics methods in foodomics, which reflects that this emerging discipline is already considered by the scientific community to be a valuable approach to assess food safety, quality, and traceability as well as for the study of the links between food and health. As a result, there is a clear need for more rapid, high-throughput MS approaches for developing and applying non-targeted studies. Nowadays, direct MS analysis is one of the main choices to achieve high throughput, generating a set of information from the largest possible number of samples in a fast and straightforward way. The use of high- and ultrahigh-resolution MS greatly improves the analytical performance and offers a good combination of selectivity and sensitivity. By using a range of methods for direct sample introduction/desorption/ionization, high-throughput and non-target analysis of a variety of samples can be obtained in a few seconds by HRMS analysis. In this review, a general overview is presented of the main characteristics of direct HRMS-based approaches and their principal applications in foodomics.

In this work, the analysis of foods and food components using capillary electromigration methods is reviewed. The present work presents and discusses the main CE applications performed in Food Science and Technology including the new field of Foodomics, reviewing recent results on food quality and safety, nutritional value, storage, bioactivity, as well as applications of CE for monitoring food interactions and food processing. The CE analysis of a large variety of food-related molecules with different chemical properties, including amino acids, peptides, proteins, phenolic compounds, carbohydrates, DNA fragments, vitamins, toxins, pesticides, additives, and other minor compounds is described. The use of microchips, CE-MS, and chiral-CE in food analysis is also discussed as well as other current and foreseen trends in this area of research. Following the previous review by Castro-Puyana et al. (Electrophoresis, 2012, 33, 147–167), the current review covers the papers that were published from February 2011 to February 2013.

In the current post-genomic era, Foodomics has been defined as a discipline that studies food and nutrition through the application of advanced omics approaches. Foodomics involves the use of genomics, transcriptomics, epigenetics, proteomics, peptidomics, and/or metabolomics to investigate food quality, safety, traceability and bioactivity. In this context, capillary electrophoresis-mass spectrometry (CE-MS) has been applied mainly in food proteomics, peptidomics and metabolomics. The aim of this review work is to present an overview of the most recent developments and applications of CE-MS as analytical platform for Foodomics, covering the relevant works published from 2008 to 2012. The review provides also information about the integration of several omics approaches in the new Foodomics field., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Modern research in food science and nutrition is moving from classical methodologies to advanced analytical strategies in which MS-based techniques play a crucial role. In this context, Foodomics has been recently defined as a new discipline that studies food and nutrition domains through the application of advanced omics technologies in which MS techniques are considered indispensable. Applications of Foodomics include the genomic, transcriptomic, proteomic, and/or metabolomic study of foods for compound profiling, authenticity, and/or biomarker-detection related to food quality or safety; the development of new transgenic foods, food contaminants, and whole toxicity studies; new investigations on food bioactivity, food effects on human health, etc. This review work does not intend to provide an exhaustive revision of the many works published so far on food analysis using MS techniques. The aim of the present work is to provide an overview of the different MS-based strategies that have been (or can be) applied in the new field of Foodomics, discussing their advantages and drawbacks. Besides, some ideas about the foreseen development and applications of MS-techniques in this new discipline are also provided., (Copyright © 2011 Wiley Periodicals, Inc.)

The analysis of food components using capillary electromigration methods is reviewed in this work. Papers that were published from February 2009 to February 2011 are included following the previous review by Herrero et al. (Electrophoresis, 2010, 31, 205-228). The analysis of amino acids, biogenic amines, peptides, proteins, DNAs, carbohydrates, phenols, polyphenols, pigments, toxins, pesticides, vitamins, additives, small organic and inorganic ions and other compounds found in foods and beverages are reviewed, as well as those applications of CE for monitoring food interactions and food processing. The use of microchips, CE-MS and chiral-CE in food analysis is also discussed as well as other current and foreseen trends in this area of research including new developments in Foodomics., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This review article addresses the different chiral capillary electrophoretic methods used to study and characterize foods and beverages through the enantiomeric separation of different food compounds such as amino acids, pesticides, polyphenols, etc. This work intends to provide an updated overview on the main applications of such enantioselective procedures together with their main advantages and drawbacks in food analysis. Some foreseeable applications and developments of these chiral CZE, CEC and MEKC methods for food characterization are also discussed. Papers that were published within the period January 2003 to October 2009 are included, following the previous review on this topic by Simo et al. (Electrophoresis 2003, 24, 2431-2441).

A CE-TOF MS proteomic approach was applied for the analysis of hydrolyzates from complex soybean protein mixtures. After CE-TOF MS method development, the new approach provided the simultaneous analysis of more than 150 peptides from the soybean protein fraction soluble in ACN-water (80/20 v/v). The method is fast (about 30 min of analysis per sample) and is characterized by a relatively low running cost. The approach was used to study the substantial equivalence between a genetically modified variety of soybean compared with its traditional counterpart. No significant differences were found between the two studied soybeans based on the protein fraction studied. The capacity of the CE-TOF MS method to analyze complex mixtures of peptides in short times opens interesting possibilities in the growing Foodomics area.

This work provides an updated overview (including works published till June 2004) on the principal applications of capillary electrophoresis-mass spectrometry (CE-MS) together with their main advantages and drawbacks in food science. Thus, analysis of amino acids, peptides, proteins, carbohydrates, or polyphenols by CE-MS in different foods is reviewed. Also, other natural compounds (e.g., alkaloids) and toxins analyzed by CE-MS in foods are revised. Moreover, exogenous substances with a potential risk for human health (e.g., pesticides, drugs) detected in foods by CE-MS are included in this work. The usefulness of CE-MS for food analysis and the information that this coupling can provide in terms of processing, composition, authenticity, quality, or safety of foods is also discussed.

In this work, the development of a new chiral capillary electrophoresis-mass spectrometry (CE-MS) method to separate D- and L-amino acids is shown. On-line coupling between CE and MS is established through an electrospray-coaxial sheath flow interface. Enantiomer separation is achieved by using a cheap, nonvolatile, chiral selector as beta-cyclodextrin in the background electrolyte (BGE) together with a physically coated capillary that is aimed to prevent contamination of the electrospray. The capillary coating is simple and easy to obtain as it only requires flushing of the capillary with a polymer aqueous solution for 3 min. Optimization of CE parameters (pH of BGE, type and concentration of chiral selector, and capillary inner diameter) and electrospray-MS parameters (nature and flow rate of the sheath liquid, nebulizer pressure) is carried out. Two different derivatization protocols of amino acids using dansyl chloride (DNS) and fluorescein isothiocyanate (FITC) are compared in terms of MS sensitivity and chiral resolution. Under optimum CE-MS conditions it is observed that the MS sensitivity obtained for FITC- and DNS-amino acids is similar (with limit of detection (LOD) in the microM range, corresponding to amounts injected in the fmol range) while chiral resolution is better for FITC-amino acids. The optimized method is demonstrated to provide the simultaneous analysis of 15 selected amino acids (i.e., FITC-D/L-Asp, -Glu, -Ser, -Asn, -Ala, -Pro, -Arg, and FITC-gamma-aminobutyric acid (GABA) in a single chiral CE-MS run, corresponding to the main amino acids that can be found in orange. Moreover, as a result of the high resolution achieved, it is possible to detect down to 2% of D-Asp in the presence of 98% of L-Asp. The good possibilities of chiral CE-MS in food analysis are corroborated through the detection of the main amino acids in a commercial orange juice (i.e., FITC-L-Asp, -Glu, -Ser, -Asn, -Pro, -Arg, and the nonchiral FITC-GABA) as well as the determination of the fraudulent addition of synthetic amino acids (containing D- and L-forms) to a fresh orange juice.

A new physically adsorbed capillary coating for capillary electrophoresis-mass spectrometry (CE-MS) of basic proteins is presented, which is easily obtained by flushing the capillary with a polymer aqueous solution for two min. This coating significantly reduces the electrostatic adsorption of a group of basic proteins (i.e., cytochrome c, lysozyme, and ribonuclease A) onto the capillary wall allowing their analysis by CE-MS. The coating protocol is compatible with electrospray inonization (ESI)-MS via the reproducible separation of the standard basic proteins (%RSD values (n = 5) < 1% for analysis time reproducibility and < 5% for peak heights, measured from the total ion electropherograms (TIEs) within the same day). The LODs determined using cytochrome c with total ion current and extracted ion current defection were 24.5 and 2.9 fmol, respectively. Using this new coating lysozymes from chicken and turkey egg white could be easily distinguished by CE-MS, demonstrating the usefulness of this method to differentiate animal species. Even after sterilization at 120 degrees C for 30 min, lysozyme could be detected, as well as in wines at concentrations much lower than the limit marked by the EC Commission Regulation. Adulteration of minced meat with 5% of egg-white could also be analysed by our CE-MS protocol.

This review article addresses the different chiral capillary electrophoretic methods that are being used for the study and characterization of foods and food compounds (e.g., amino acids, organic acids, sugars, pesticides). An updated overview, including works published till December 2002, on the principal applications of enantioselective procedures together with their main advantages and drawbacks in food analysis is provided. Some anticipated applications of chiral electromigration methods in food characterization are also discussed.

Abstract: In this work, two different capillary electrophoresis–mass spectrometry (CE–MS) methods, namely, capillary electrophoresis–ion-trap mass spectrometry (CE–IT-MS) and capillary electrophoresis–time-of-flight mass spectrometry (CE–TOF-MS), applied to analyze biogenic amines in wine samples are investigated. A group of five amines was selected as case study (namely, putrescine, cadaverine, histamine, phenylethylamine and tyramine) since they are the most frequently biogenic amines found in wines. The possibilities of both instruments in terms of sensitivity, selectivity and quantitation during the determination of the mentioned biogenic amines in wine samples was studied and their results corroborated by HPLC. After optimization of the analytical conditions, CE–IT-MS and CE–TOF-MS allowed the identification of biogenic amines in wines without any previous treatment except diluting 1:1 with water and filtering. Biogenic amines were determined in three red wines and one white wine showing, as expected, a higher concentration in red wines. Moreover, CE–IT-MS and CE–TOF-MS were compared regarding their capacity to detect other biogenic amines different to the selected ones in wine samples, showing CE–TOF-MS a much better capability (i.e., putrescine, cadaverine, histamine, phenylethylamine, tyramine, triptamine, spermidine, spermine, ethanolamine and isoamylamine were identified by CE–TOF-MS in a single analysis). Moreover, CE–TOF-MS allowed the quantitation of biogenic amines with limits of detection as low as 10ng/mL, comparable to those obtained using HPLC with fluorescence detection, without any previous derivatization step and with analysis times fivefold faster (40min by HPLC and 8min by CE–TOF-MS). [Copyright &y& Elsevier]