Search

Per- and polyfluoroalkyl substances (PFAS) in surface and ground waters supplying municipal drinking water are a growing concern. However, PFAS concentrations in water treatment residuals (WTRs)-a solid by-product of water treatment-have yet to be explored. In a first of its kind assessment, we examine PFAS occurrence in seven calcium (Ca)-, iron-, and aluminum-based drinking water treatment residuals (DWTRs) and one wastewater effluent treatment residual (WWETR) produced using aluminum chlorohydrate (ACH). Only perfluoroalkyl acids (PFAAs) were detected, with total PFAA concentrations in the seven DWTRs produced from naturally recharged water sources ranging from 0 to ∼3.3 μg kg -1 ; no PFAS were detected in either of the Ca-DWTRs. The ACH-WWETR contained the highest number and concentration of PFAAs (34 μg kg -1 ). Desorption of resident PFAAs from the WTRs was negligible for the carboxylates (PFCAs). Some desorption of the sulfonates (PFSAs) was detected, particularly for PFOS which had the highest concentration among all resident PFAAs. The ACH-WWETR was further evaluated for its potential to attenuate additional PFAAs (3500 μg mL -1 total PFAAs) in a biosolid-derived porewater matrix. Sorption was highest for long-chain PFAAs and subsequent desorption of the adsorbed PFAAs ranged from 0% to no more than 26%, with the WWETR mass added strongly affecting both PFSA and PFCA sorption/desorption. These findings suggest that WTRs, if introduced into the environment, are unlikely to be a major source of PFAS. Also, the use of particular WTRs as amendments may provide a beneficial reduction in PFAS mobility., (© 2023 The Authors. Journal of Environmental Quality © 2023 American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America.)

Drinking water treatment residuals (DWTRs), solid by-products of drinking water treatment, are dominated by calcium (Ca), iron (Fe), or aluminum (Al), depending on the coagulant used. DWTRs are often landfilled, but current research is exploring options for beneficial reuse. Previous studies have shown that Al- and Fe-rich materials have potential to reduce the mobility of per- and polyfluoroalkyl substances (PFAS). Here, we investigated how amending biosolids with 5% wt/wt DWTRs affected plant bioavailable PFAS in two different simulated scenarios: (1) agricultural scenario with Solanum lycopersicum (tomato) grown in soil amended with an agronomically relevant rate of DWTR-amended biosolids (0.9% w/w, resulting in 0.045% w/w DWTR in the biosolids-amended soil) and (2) mine reclamation scenario examining PFAS uptake by Lolium perenne (perennial ryegrass) grown in soil that received DWTR-amended biosolids amendment at a rate consistent with the mine remediation (13% w/w, resulting in 0.65% w/w DWTR in the biosolids-amended soil). Amending biosolids with Ca-DWTR significantly reduced perfluorobutanoic acid (PFBA) uptake in ryegrass and perfluorohexanoic acid uptake in tomatoes, possibly due to DWTR-induced pH elevation, while Fe-DWTR amendment reduced PFBA bioaccumulation in ryegrass. The Al-DWTR did not induce a significant reduction in accumulated PFAS compared to controls. Although the reasons for this finding are unclear, the relatively low PFAS concentrations in the biosolids and relatively high Al content in the biosolids and soil may be partially responsible., (© 2023 The Authors. Journal of Environmental Quality © 2023 American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America.)

Per- and polyfluoroalkyl substances (PFAS) are a class of highly persistent contaminants that have been linked to human health effects at low exposure concentrations. Public concerns exist that land-application of biosolids may result in the release of PFAS into terrestrial and aquatic ecosystems. The relative importance of inorganic constituents such as Fe and Al, which are known to impact PFAS retention/release behavior in soils, on PFAS release from wastewater residuals (WWRs, i.e., biosolids and sewage sludges) is not well understood. Here, we examine native concentrations and WWR-water partition coefficients of a range of PFAS in the context of WWRs characteristics including oxalate-extractable Fe and Al, organic matter (OM), dissolved organic carbon, and total protein content. Total PFAS concentrations, which included perfluoroalkyl carboxylates, perfluoroalkyl sulfonates, fluorotelomer sulfonates and some sulfonamides, ranged from ∼480 to 3500 μg PFAS kg -1 dry weight. PFAS WWR-water partition coefficients ranged from ∼10 to 20,000 L kg -1 , consistent with the literature. PFAS partitioning was significantly correlated to oxalate extractable Al and Fe as well as bulk OM and protein content. These results have important implications for wastewater treatment facilities that recycle Al- and Fe-based drinking water treatment residuals in terms of both PFAS retention and loading., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

PFASs are highly persistent in the environment and the potential exists for terrestrial biota to accumulate PFAS, which may result in exposure of higher trophic level organisms to these compounds through consumption. However, trophic transfer of proteinophilic compounds such as PFAS has not been extensively studied and the degree to which plant-accumulated PFAS will be transferred to herbivorous consumers is unclear. Here, we exposed Solanum lycopersicum (tomato) plants to a suite of 7 different PFAS, including 4 carboxylic acids (PFOA, PFHxA, PFHpA and PFDA) and 3 sulfonates (PFBS, PFHxS and PFOS). Exposed leaf tissues were subsequently fed to Manduca sexta (tobacco hornworm) caterpillars. Biomagnification factors (BMFs) were all below 1 and patterns of uptake and elimination were similar between the different PFAS. However, PFOS bioaccumulated in the hornworms to a much higher concentration, with approximately 5-fold higher BMFs and assimilation efficiencies (AEs) than other PFAS tested. AE and BMF, as well as PFAS uptake by the plants, were positively correlated with PFAS carbon chain length for both sulfonates and carboxylic acids, providing evidence that longer chain PFAS may be more efficiently accumulated (or less efficiently eliminated) than shorter-chain PFAS in some contexts., (Copyright © 2022. Published by Elsevier Ltd.)