Search

Biobanks containing formalin-fixed, paraffin-embedded (FFPE) tissues from animals and human atomic-bomb survivors exposed to radioactive particulates remain a vital resource for understanding the molecular effects of radiation exposure. These samples are often decades old and prepared using harsh fixation processes which limit sample imaging options. Optical imaging of hematoxylin and eosin (H&E) stained tissues may be the only feasible processing option, however, H&E images provide no information about radioactive microparticles or radioactive history. Synchrotron X-ray fluorescence microscopy (XFM) is a robust, non-destructive, semi-quantitative technique for elemental mapping and identifying candidate chemical element biomarkers in FFPE tissues. Still, XFM has never been used to uncover distribution of formerly radioactive micro-particulates in FFPE canine specimens collected more than 30 years ago. In this work, we demonstrate the first use of low-, medium-, and high-resolution XFM to generate 2D elemental maps of ~ 35-year-old, canine FFPE lung and lymph node specimens stored in the Northwestern University Radiobiology Archive documenting distribution of formerly radioactive micro-particulates. Additionally, we use XFM to identify individual microparticles and detect daughter products of radioactive decay. The results of this proof-of-principle study support the use of XFM to map chemical element composition in historic FFPE specimens and conduct radioactive micro-particulate forensics. [ABSTRACT FROM AUTHOR]

It is widely accepted that micro- and nanoscale inhomogeneities govern the performance of many thin-film solar cell absorbers. These inhomogeneities yield material properties (e.g., composition, structure, and charge collection) that are challenging to correlate across length scales and measurement modalities. The challenge is compounded if a correlation is sought during device operation or in conditions that mimic aging under particular stressors (e.g., heat and electrical bias). Correlative approaches, particularly those based on synchrotron x-ray sources, are powerful since they can access several material properties in different modes (e.g., fluorescence, diffraction, and absorption) with minimal sample preparation. Small-scale laboratory x-ray instruments have begun to offer multi-modality but are typically limited by low x-ray photon flux, low spatial resolution, or specific sample sizes. To overcome these limitations, a characterization stage was developed to enable multi-scale, multi-modal operando measurements of industrially relevant photovoltaic devices. The stage offers compatibility across synchrotron x-ray facilities, enabling correlation between nanoscale x-ray fluorescence microscopy, microscale x-ray diffraction microscopy, and x-ray beam induced current microscopy, among others. The stage can accommodate device sizes up to 25 × 25 mm2, offering access to multiple regions of interest and increasing the statistical significance of correlated properties. The stage materials can sustain humid and non-oxidizing atmospheres, and temperature ranges encountered by photovoltaic devices in operational environments (e.g., from 25 to 100 °C). As a case study, we discuss the functionality of the stage by studying Se-alloyed CdTe photovoltaic devices aged in the stage between 25 and 100 °C. [ABSTRACT FROM AUTHOR]

The photophysical and photochemical properties of two Pt(IV)Re(I) conjugates were studied via both experimental and computational methods. Both conjugates exhibit modest photocytotoxicity against ovarian cancer cells. X-ray fluorescence microscopy showed that Pt and Re colocalize in cells whether they had been irradiated or not. This work demonstrates the potential of photoactivated multilimetallic agents for combating cancer. [ABSTRACT FROM AUTHOR]

Recently, diimine Re(I) tricarbonyl complexes have attracted great interest due to their promising cytotoxic effects. Here, we compare the cytotoxicity and cellular uptake of two Re(I) compounds fac-[(Re(CO)3(bpy)(H2O)](CF3SO3) (1) and Na(fac-[(Re(CO)3(bpy)(S2O3)])·H2O (bpy = 2,2′-bipyridine) (2). The Re-thiosulfate complex in 2 was characterized in two solvated crystal structures {Na(fac-[Re(CO)3(bpy)(S2O3)])·1.75H2O·C2H5OH}4 (2 + 0.75H2O + C2H5OH)4 and (fac-[Re(CO)3(bpy)(H2O)]) (fac-[Re(CO)3(bpy)(S2O3)])·4H2O (3). The cytotoxicity of 1 and 2 was tested in the MDA-MB-231 breast cancer cell line and compared with that of cisplatin. The cellular localization of the Re(I) complexes was investigated using synchrotron-based X-ray fluorescence microscopy (XFM). The results show that replacement of the aqua ligand with thiosulfate renders the complex less toxic most likely by distrupting its cellular entry. Therefore, thiosulfate could potentially have a similar chemoprotective effect against diimine fac-Re(CO)3 complexes as it has against cisplatin. [ABSTRACT FROM AUTHOR]

The cellular distribution of three dirhodium(ii) complexes with a paddlewheel structure was investigated using synchrotron-based X-ray fluorescence microscopy and cell viability studies. Complexes with vacant axial sites displayed cytotoxic activity and nuclear accumulation whereas complexes in which the axial positions were blocked showed little to no toxicity nor uptake. [ABSTRACT FROM AUTHOR]

Titanium dioxide (TiO) nanoparticles are produced for many different purposes, including development of therapeutic and diagnostic nanoparticles for cancer detection and treatment, drug delivery, induction of DNA double-strand breaks, and imaging of specific cells and subcellular structures. Currently, the use of optical microscopy, an imaging technique most accessible to biology and medical pathology, to detect TiO nanoparticles in cells and tissues ex vivo is limited with low detection limits, while more sensitive imaging methods (transmission electron microscopy, X-ray fluorescence microscopy, etc.) have low throughput and technical and operational complications. Herein, we describe two in situ posttreatment labeling approaches to stain TiO nanoparticles taken up by the cells. The first approach utilizes fluorescent biotin and fluorescent streptavidin to label the nanoparticles before and after cellular uptake; the second approach is based on the copper-catalyzed azide-alkyne cycloaddition, the so-called Click chemistry, for labeling and detection of azide-conjugated TiO nanoparticles with alkyneconjugated fluorescent dyes such as Alexa Fluor 488. To confirm that optical fluorescence signals of these nanoparticles match the distribution of the Ti element, we used synchrotron X-ray fluorescence microscopy (XFM) at the Advanced Photon Source at Argonne National Laboratory. Titanium-specific XFM showed excellent overlap with the location of optical fluorescence detected by confocal microscopy. Therefore, future experiments with TiO nanoparticles may safely rely on confocal microscopy after in situ nanoparticle labeling using approaches described here. [ABSTRACT FROM AUTHOR]

Trace metals play important roles in biological function, and x-ray fluorescence microscopy (XFM) provides a way to quantitatively image their distribution within cells. The faithfulness of these measurements is dependent on proper sample preparation. Using mouse embryonic fibroblast NIH/3T3 cells as an example, we compare various approaches to the preparation of adherent mammalian cells for XFM imaging under ambient temperature. Direct side-by-side comparison shows that plunge-freezing-based cryoimmobilization provides more faithful preservation than conventional chemical fixation for most biologically important elements including P, S, Cl, K, Fe, Cu, Zn and possibly Ca in adherent mammalian cells. Although cells rinsed with fresh media had a great deal of extracellular background signal for Cl and Ca, this approach maintained cells at the best possible physiological status before rapid freezing and it does not interfere with XFM analysis of other elements. If chemical fixation has to be chosen, the combination of 3% paraformaldehyde and 1.5 % glutaraldehyde preserves S, Fe, Cu and Zn better than either fixative alone. When chemically fixed cells were subjected to a variety of dehydration processes, air drying was proved to be more suitable than other drying methods such as graded ethanol dehydration and freeze drying. This first detailed comparison for x-ray fluorescence microscopy shows how detailed quantitative conclusions can be affected by the choice of cell preparation method. [ABSTRACT FROM AUTHOR]

The elemental composition of single cells of Nitrosomonas europaea 19718 was studied via synchrotron X-ray fluorescence microscopy (XFM) as a function of inhibition by divalent copper (Cu(II)) and batch growth phase. Based on XFM, the intracellular Cu concentrations in exponential phase cultures of N. europaea exposed to Cu(II) were statistically higher than in stationary phase cultures at the 95% confidence interval (α = 0.05). However, the impact of Cu inferred from specific oxygen uptake rate (sOUR) measurements at the two physiological states was statistically not dissimilar at the Cu(II) doses tested, except at 1000 μM Cu(II), at which exponential phase cultures were significantly more inhibited. Furthermore, the elemental composition in uninhibited exponential and stationary phase N. europaea cultures was similar. Notably, the molar fractions of Cu and Fe, relative to other elements in N. europaea cultures were statistically higher than those recently reported in Pseudomonas fluorescens possibly owing to the preponderance of metal cofactor rich catalytic enzymes (such as ammonia monooxygenase) and electron transport mechanisms in N. europaea. [ABSTRACT FROM AUTHOR]

Abstract: Dithiocarbamates are a commercially important class of compounds that can produce peripheral neuropathy in humans and experimental animals. Previous studies have supported a requirement for copper accumulation and enhanced lipid peroxidation in dithiocarbamate-mediated myelinopathy. The study presented here extends previous investigations in two areas. Firstly, although total copper levels have been shown to increase within the nerve it has not been determined whether copper is increased within the myelin compartment, the primary site of lesion development. Therefore, the distribution of copper in sciatic nerve was characterized using synchrotron X-ray fluorescence microscopy to determine whether the neurotoxic dithiocarbamate, N,N-diethyldithiocarbamate, increases copper levels in myelin. Secondly, because lipid peroxidation is an ongoing process in normal nerve and the levels of lipid peroxidation products produced by dithiocarbamate exposure demonstrated an unusual cumulative dose response in previous studies the biological impact of dithiocarbamate-mediated lipid peroxidation was evaluated. Experiments were performed to determine whether dithiocarbamate-mediated lipid peroxidation products elicit an antioxidant response through measuring the protein expression levels of three enzymes, superoxide dismutase 1, heme oxygenase 1, and glutathione transferase α, that are linked to the antioxidant response element promoter. To establish the potential of oxidative injury to contribute to myelin injury the temporal relationship of the antioxidant response to myelin injury was determined. Myelin structure in peripheral nerve was assessed using multi-exponential transverse relaxation measurements (MET2) as a function of exposure duration, and the temporal relationship of protein expression changes relative to the onset of changes in myelin integrity were determined. Initial assessments were also performed to explore the potential contribution of dithiocarbamate-mediated inhibition of proteasome function and inhibition of cuproenzyme activity to neurotoxicity, and also to assess the potential of dithiocarbamates to promote oxidative stress and injury within the central nervous system. These evaluations were performed using an established model for dithiocarbamate-mediated demyelination in the rat utilizing sciatic nerve, spinal cord and brain samples obtained from rats exposed to N,N-diethyldithiocarbamate (DEDC) by intra-abdominal pumps for periods of 2, 4, and 8 weeks and from non exposed controls. The data supported the ability of DEDC to increase copper within myelin and to enhance oxidative stress prior to structural changes detectable by MET2. Evidence was also obtained that the excess copper produced by DEDC in the central nervous system is redox active and promotes oxidative injury. [Copyright &y& Elsevier]

Purpose: To present an overview of the workshop on X-ray fluorescence microscopy (XFM). Results: Talks presented at the workshop and the associated works are highlighted. Conclusions: Use of XFM in biomedical sciences is growing and may be advanced even further by adding (i) high resolution microprobes, and (ii) high throughput approaches to the XFM toolbox. [ABSTRACT FROM AUTHOR]

Abstract: Synchrotron-based X-ray fluorescence microscopy (XFM) using hard X-rays focused into sub-micron spots is a powerful technique for elemental quantification and mapping, as well as microspectroscopic measurements such as μ-XANES (X-ray absorption near edge structure). We have used XFM to image and simultaneously quantify the transuranic element plutonium at the L3 or L2-edge as well as Th and lighter biologically essential elements in individual rat pheochromocytoma (PC12) cells after exposure to the long-lived plutonium isotope 242Pu. Elemental maps demonstrate that plutonium localizes principally in the cytoplasm of the cells and avoids the cell nucleus, which is marked by the highest concentrations of phosphorus and zinc, under the conditions of our experiments. The minimum detection limit under typical acquisition conditions with an incident X-ray energy of 18keV for an average 202μm2 cell is 1.4fg Pu or 2.9×10−20 molesPuμm−2, which is similar to the detection limit of K-edge XFM of transition metals at 10keV. Copper electron microscopy grids were used to avoid interference from gold X-ray emissions, but traces of strontium present in naturally occurring calcium can still interfere with plutonium detection using its Lα X-ray emission. [Copyright &y& Elsevier]