Search

With the rapid growth of the microelectronic packaging market, it is necessary to increase the throughput and reduce the cost of flip chip. Driven by these evolutions, a novel revolving-turret chip transferring (RTCT) technology is introduced to implement high-throughput flip chip packaging. The unnecessary time delays of packaging processes could be eliminated in the RTCT technology due to its parallel manner of motions. In order to analyze the packaging efficiency, the layout and movement sequence of the packaging system are studied, and a calculation model of packaging efficiency is proposed. Furthermore, the effects of the critical parameters (the horizontal and the vertical spacing of antennas and the maximum velocity and acceleration of the turret-type head) on packaging efficiency are investigated to search out the optimal parameters combination. To verify the performance of the RTCT technology under optimal parameters combination, two cases are implemented and compared. The results show that due to parallel motions of processes, unnecessary delays affecting the packaging efficiency have been reduced, and the packaging efficiency of ALN-9714 inlay could be more than 35k chips per hour. In addition, compared with the conventional flip chip packaging process, the RTCT technology is more effective in packaging the chips on antennas with multicolumn layout and small horizontal spacing. [ABSTRACT FROM AUTHOR]

This paper designs a new multilayered particle anisotropic conductive film (ACF) compound. Using the particle-reinforced composite model and probability theory, the novel ACF compound is compared with three traditional ACFs having the same particle volume fraction. The particle-reinforced model applies the concept of bonded and debonded structures in the interfaces between the adhesive resin and the particles. The elastic modulus of the particle-reinforced ACF is a function of the particle volume fraction and the bonded condition. In the failure model, probability theory is used to calculate the probability of opening and bridging. The volume fraction of the conductive particles plays an important role in determining the optimal ACF design. The current results indicate that the flip chip packaging performed using the novel multilayered particle ACF compound (particles distributed in the top/bottom surface layers) exhibits superior particle-reinforcement properties and a lower failure probability than traditional ACFs. The improved understanding of reinforcement mechanisms and failure probability developed by this study facilitates the enhanced design of novel ACF compounds. [ABSTRACT FROM PUBLISHER]

This paper develops a model for predicting the failure probability of flip chip packaging using anisotropic conductive adhesive (ACA). The proposed approach modifies the box model to improve the accuracy of the bridging probability estimation by considering bridging in all directions. In the current failure analysis, probability theory is applied to calculate the probability of both opening and bridging failure. The Poisson distribution is used to calculate the probability of opening in the vertical gap between the pads, while the modified box model is used to estimate the probability of bridging between the pads. The results indicate that the modified box model provides an effective means of accurately estimating the probability of failure. The failure analysis takes the volume fraction of the conductive particles as the major variable in defining the optimal ACA design condition. A V-shaped curve model can be employed to establish an appropriate value of the volume fraction as a function of conductive particle radius, pitch, and pad dimensions such that the overall probability of failure is minimized. [ABSTRACT FROM PUBLISHER]

We demonstrate a shallow ridge waveguide, lumped element electroabsorption modulator (EAM) based on AlInGaAs multiple quantum wells, operating with input powers up to 8 dBm. The device was isolated between two DC controlled sections, using angled etched slots in the waveguide, minimizing optical feedback, while also providing 40-KΩ resistance between devices. The EAM uses a planar isolated pedestal contact with a benzocyclobutene bridge, allowing for a small contact footprint of just 0.024 mm2, while being suitable for flip-chip packaging. The parasitic capacitance was measured to be 19.6 fF, and the EAM has a f3dB bandwidth of 42 GHz. [ABSTRACT FROM PUBLISHER]