Search

Despite the large number of studies addressing the effect of acrylic resin polymerization concerning flexural properties, limited research has been conducted on the manufacturing impact on a polymer's mechanical properties. Photosensitive resinous materials are used in various engineering applications where they may be exposed to multiple detrimental environments during their lifetime. Therefore, there is a need to understand the impact of an environment on the service life of resins. Thus, flexural tests were conducted to study the effects of exposure time and angle on the flexural strength of resins. Herein, the main objective was to explore the strength, stability, and flexural durability of photosensitive resin (EPIC-2000ST) fabricated at different exposure times (E) and angle deviation varying from 0° to 85° with a 5° increment. The samples in circular rings were manufactured and divided into five groups according to their exposure time (E): 10 s, 20 s, 30 s, 40 s, and 50 s. In each exposure time, we designed rings via SolidWorks software and experimentally fabricated at different oblique angles (OA) varying from 0° to 85° with a 5° increment during each fabrication, i.e., OA = 0°, 5°, 10°, 15°, 20°, 25°, 30°, 35°, 40°, 45°, 50°, 55°, 60°, 65°, 70°, 75°, 80°, and 85°. Flexural strength was evaluated using a three-point bending test. Optical electron microscopy was used to examines the samples' exterior, interior, and ruptured surfaces. Our experimental analysis shows that flexural strength was significantly enhanced by increasing exposure time and at higher oblique angles. However, at lower angles and less exposure time, mechanical flexural resilience declines. [ABSTRACT FROM AUTHOR]

Recently additive manufacturing of lunar regolith to utilize in-situ resources of the Moon for deep space exploration has attracted attention. However, most previous works have been limited by low precision, inferior mechanical properties, and complex processes, such as ball grinding. Furthermore, the regional distribution difference of the lunar regolith which shows compositional diversity, demands the exploration of manufacturing of low-titanium lunar soil, which has not been comprehensively studied before. Herein, the vat photopolymerization and heat treatment of raw low-titanium lunar regolith simulant were investigated to achieve high dimensional precision and high mechanical properties. The influence of solid content and photoinitiator concentration on printability is carefully examined based on the characterization of rheological behaviors and curing depth. Then the vat photopolymerization is used to build green bodies with good interlayer bonding strength and high dimensional precision. Besides this, the effect of the debinding heating rate and sintering temperature on samples were optimized in air and nitrogen to enhance the mechanical properties of printed samples. Finally, the optimal sintered parts with a flexural strength of 108.8 MPa and compressive strength of 222.8 MPa were obtained. [ABSTRACT FROM AUTHOR]