Search

Burning hydrogen-rich syngas fuels derived from various sources in combustion equipment is an effective pathway to enhance energy security and of significant practical implications. Emissions from the combustion of hydrogen-rich fuels have been a main concern in both academia and industry. In this study, the NO and CO emission characteristics of both laminar and turbulent counterflow premixed hydrogen-rich syngas/air flames were experimentally and numerically studied. The results showed that for both laminar and turbulent counterflow premixed flames, the peak NO mole fraction increased as the equivalence ratio increased from 0.6 to 1.0 and decreased as the strain rate increased. Compared with the laminar flames at the same bulk flow velocity, turbulent flames demonstrated a lower peak NO mole fraction but broader NO formation region. Using the analogy theorem, a one-dimensional turbulent counterflow flame model was established, and the numerical results indicated that the small-scale turbulence-induced heat and mass transport enhancements significantly affected NO emission. Considering NO formation at the same level of fuel consumption, the NO formation of the turbulent flame was significantly lower than that of the laminar flame at the same level of fuel consumption, implying that the turbulence-induced heat and mass transfer enhancement favored NOx suppression. [ABSTRACT FROM AUTHOR]

This study investigated the flame structure and dynamics of a bluff-body flame when numerically close to blow-off conditions. This includes the impact of the hydrogen ratio on lean CH4/H2/air flame stabilization and blow-off characteristics. In this study, we assessed the impacts of four different hydrogen ratios: 0%, 30%, 60%, and 90%. Large eddy simulation (LES) was coupled with a thickened flame (TF) model to determine the turbulent combustion using a 30-species skeletal mechanism. The numerical results were progressively validated using OH-PLIF and PIV techniques. The results obtained from the numerical simulations showed minor differences with the experimental data on the velocity field and flame structure for all conditions. The presented results reveal that the flame is stabilized in higher-strain-rate spots more easily in the presence of high hydrogen ratios. Moreover, the flame location moves away from the concentrated vortex area with an increasing hydrogen ratio. The results of our blow-off investigation indicate that the blow-off sequence of a premixed bluff-body flame can be separated into two stages. The entire blow-off process becomes shorter with an increase in the hydrogen ratio. The primary reason for global extinction is a reduction in the heat release rate, and enstrophy analysis implies that blending hydrogen can reduce the enstrophy values of flames at the downstream locations. The dilatation and baroclinic torque terms decrease close to blow-off, but their decline is not significant in high-hydrogen-ratio conditions. [ABSTRACT FROM AUTHOR]

Blending a low ratio of hydrogen into traditional hydrocarbon fuels can reduce the modification in structure of existing combustors. However, even a low hydrogen ratio can increase the propensity of flashback due to the extremely high reactivity of hydrogen. Swirl number is a key parameter of swirl combustors which determines the flow structure. To design reliable gas turbine combustors for hydrogen-blended fuels, the study in the effect of swirl strength on flashback characteristic and the underlying mechanism is necessary. In this study, the flashback characteristics of premixed 30% H 2 /70% CH 4 /air flame in a bluff-body swirl burner is investigated via both experiment and large-eddy simulations with the flamelet-generated-manifold method (FGM-LES). The flashback mode and flame-flow interaction are analyzed based on the LES results. It is found that the increase in swirl strength will increase the propensity of flashback and promote the flashback speed of premixed 30% H 2 /70% CH 4 /air flame in the bluff-body swirl burner. The turns from Mode II (small-scale flame bulges leading flashback) to Mode I (large-scale swirling flame tongue leading flashback) during flashback of hydrogen-blended flames due to the production of stronger reversed flow by swirling flow. It is also found that stronger swirl strength will result in a smoother flame front and narrower strain rate distribution range which suppresses the local hydrogen enrichment due to preferential diffusion of hydrogen, thus suppressing the flame propagating speed. However, this effect is not dominant in flashback process compared to the promotion of reversed flow by increased swirl strength. • Efficient FGM tabulation including heat loss and differential diffusion for premixed hydrogen/methane flame is applied. • The flashback processes of premixed hydrogen-blended flame in experiment were reproduced well through FGM-LES. • The interaction between swirl strength and preferential diffusion of hydrogen was investigated. [ABSTRACT FROM AUTHOR]