Search

In order to satisfy the requirements of high-quality and high-performance optimal material manufacturing process, it is essential to control the gas system of the manufacturing process. In the actual industry, the quality of products is improved by controlling various gases in the manufacturing process. The tunable laser absorption spectroscopy (TDLAS) technique can be measured by the temperature and concentration of target gas simultaneously. Among the more advanced technologies, CT-TDLAS is the most crucial technique for measuring temperature and concentration distributions across two-dimensional planes. This study suggests a three-dimensional useful measurement of irregular flow or exhaust gases. Furthermore, an optical measurement method has been adopted to measure temperature distribution at a cross-section of the Methane Air premixed turbulent flame. The equivalence ratio of fuel can control this system. The burner system consists of two sections (main flame, sub-flame) for a turbulent flame. In the CT-TDLAS technique, it is essential to set the wavelength for target gases. There is a limit to high-temperature measurement in temperature estimation using a single laser-specific wavelength. Therefore, compared measurement performance was made using a mixed type laser (1388 nm, 1343 nm) and a single type laser (1388 nm). The temperatures obtained by using the optical measurement results were relatively evaluated with those obtained by the thermocouples. It was confirmed that the relative error of the temperature occurred at the central position of the burner. It was about 13.33% by the mixed laser system and 38.33% by the single laser system in most close to point from the burner. [ABSTRACT FROM AUTHOR]

To use supplying gases and energy resources efficiently, accurate measurement of irregular gas is necessary. The TDLAS (Tunable laser absorption spectroscopy) technique can be used to control and monitor the supplying gas conditions and combustion of industrial processes. Recently, CT-TDLAS (Computed tomography-tunable diode laser absorption spectroscopy) has been developed to measure the temperature and concentration field of gases. In this study, the 2-dimensional temperature distribution of the Propane-Air premixed flame in several mixing conditions of fuel has been measured by the constructed CT-TDLAS system. 2-Dimensional temperature distributions are measured by 16 path cells. Further, the third-order polynomial regression analysis was applied to resolve the absorption spectra from the incident and transmitted light for a particular gas. The SMART (simultaneous multiplicative algebraic reconstruction technique) algorithm has been adopted for reconstructing the absorption coefficients on the detecting area. As a result of comparing the temperature for the 2-dimensional detecting area using the thermocouple and CT-TDLAS technique, it has been verified that the relative error for the temperatures measured by the thermocouples and calculated by the CT-TDLAS was up to 8%. [ABSTRACT FROM AUTHOR]