Search

A highly sensitive magnetic field sensor based on mode coupling effect in a microstructured optical fiber (MOF) was theoretically investigated by using the finite element method. Magnetic fluid with refractive index higher than silica was designed to be filled into one cladding air hole in MOF to form a defect core. The coupling wavelength between fiber core modes and defect core modes can be modulated by external magnetic field. Simulation results show that the measuring sensitivity of magnetic field and figure of merit reached 1620 pm/Oe, 0.081/Oe in x-polarized mode and 1790 pm/Oe, 0.045/Oe in y-polarized mode, respectively. Meanwhile, the intensity of magnetic field depicts a good linear relationship with the coupling wavelength for both orthogonal polarized directions in the range of 25–175.9 Oe. The performance of the designed magnetic field sensor can be improved by optimizing the structural parameters in MOF. [ABSTRACT FROM AUTHOR]

Abstract A magnetic field sensor based on magnetic fluids (MFs) selectively infilling photonic crystal fiber (PCF) is designed and analyzed by the finite-element method (FEM). The PCF consists of three-layer air holes in the cladding which are arranged in regular hexagonal lattice. The left and right sides of the fiber core are made up of two larger circular air holes while the upper and below sides are made up of four smaller circular air holes which are benefit to enhance the birefringent effect. MFs are injected into one air hole in the second cladding layer which generates a defect core with high confinement loss. Air holes around the defect core are asymmetrically distributed which can enhance the birefringence of the transmission mode in defect core. When the phase matching condition between core modes and defect core modes is satisfied, the light transmitting in the core couples to the defect core and a sharp decrease of light transmitting energy occurs. The refractive index of defect core modes is modulated by magnetic field strength. The peak wavelengths of confinement loss spectra depicts pretty well linear relationship with magnetic field strength in the detected range of 30–130 Oe. The magnetic field measuring sensitivity reaches to 584 pm/Oe for x-polarized mode and 700 pm/Oe for y-polarized mode, respectively. [ABSTRACT FROM AUTHOR]

Abstract We propose and investigate a temperature sensor based on Sagnac interferometer with liquid crystal (LC) photonic crystal fiber (PCF) by finite element method (FEM). LC E7 which is anisotropic under electrical field is designed to be infiltrated into the cladding air holes of PCF. The birefringent PCF is then launched into a Sagnac interferometer. The interference spectrum of the Sagnac interferometer is influenced by the thermal effect of LC E7 and thus could be used to measure the temperature. The simulation results show that the temperature measuring sensitivity and resolution reach to 15 nm/K and 6.7E−4 K in the range of 290–320 K. The measuring range and sensitivity could be modified further by optimizing the PCF structure parameters. [ABSTRACT FROM AUTHOR]

A temperature sensor based on modes coupling effect in a liquid crystal-filled microstructured optical fiber was proposed and studied in this paper. The sensing characteristics were investigated by using a full-vectorial finite-element method (FEM) with perfectly matched layer and scattering boundary condition. For the purpose of temperature sensing, liquid crystal E7 was designed to be infiltrated into one cladding air hole in PCF to form a defect core. As the phase matching condition is satisfied, the core modes couple to several different ordered defect core modes, and finally experience a large increase in the confinement loss spectra. Furthermore, the loss spectra shift toward opposite directions in the two temperature segments (15–29 °C, 29–50 °C) for X-polarized (X-pol) direction, while it experiences a blue shift in the temperature range of 15–50 °C for Y-polarized (Y-pol) direction. Numerical simulation results show that the sensitivity reaches −5.26 nm/°C at 30 °C. The coupling effect between the core fundamental mode and high-order defect core modes utilized in this paper will be beneficial to the high-sensitivity detection. [ABSTRACT FROM AUTHOR]

A dual-polarized microstructure fiber sensor is based on surface plasmon resonance, which is arranged of pentagonal lattice to achieve refractive index sensing in the near-infrared spectrum. The gold nanowire-filled fiber sensor exhibits excellent sensing characteristics and improved transmission properties. Finite element method is used for computational analysis and structural optimization for the fiber sensor. When the refractive index of the analyte range from 1.32 to 1.38, dual-polarizd sensing can be implemented as a self-calibration with wavelengths increasing from 700 to 1200 nm. For the proposed sensor, the highest wavelength sensitivity of 10,286 nm/RIU is exhibited with a sensor resolution of 9.72×10−6 RIU, and the corresponding amplitude sensitivity and figure of merit are as high as 544.0 RIU−1 and 146.9. Moreover, the sensing length of at least 1.14 mm ensures accurate detection of optical signals for proposed sensor. Owing to the above advantages, the proposed sensor is suitable for high integration and high precision sensitivity detection. [ABSTRACT FROM AUTHOR]