Search

Summary: This study presents the development of the scaled boundary finite element method (SBFEM) to simulate elastoplastic stress wave propagation problems subjected to transient dynamic loadings. Material nonlinearity is considered by first reformulating the SBFEM to obtain an explicit form of shape functions for polygons with an arbitrary number of sides. The material constitutive matrix and the residual stress fields are then determined as analytical polynomial functions in the scaled boundary coordinates through a local least squares fit to evaluate the elastoplastic stiffness matrix and the residual load vector semianalytically. The treatment of the inertial force within the solution of the nonlinear system of equations is also presented within the SBFEM framework. The nonlinear equation system is solved using the unconditionally stable Newmark time integration algorithm. The proposed formulation is validated using several benchmark numerical examples. [ABSTRACT FROM AUTHOR]

A novel method coupling the scaled boundary finite element method (SBFEM) and the finite element method (FEM) is developed for linear elastic fracture modelling. A very simple but effective remeshing procedure based on the FE mesh only is used to accommodate crack propagation. The crack-tip region is modelled by an SBFE subdomain whose semi-analytical displacement solutions are used to extract accurate stress intensity factors. The SBFE subdomain is coupled with the surrounding FE mesh through virtual interfaces so that non-matching nodal discretisations of the shared boundaries can be used and only one SBFE subdomain is needed at a crack-tip. A few plane problems are modelled to validate the new method. [ABSTRACT FROM AUTHOR]

Abstract: A posteriori h-hierarchical adaptive scaled boundary finite element method (ASBFEM) for transient elastodynamic problems is developed. In a time step, the fields of displacement, stress, velocity and acceleration are all semi-analytical and the kinetic energy, strain energy and energy error are all semi-analytically integrated in subdomains. This makes mesh mapping very simple but accurate. Adaptive mesh refinement is also very simple because only subdomain boundaries are discretised. Two 2D examples with stress wave propagation were modelled. It is found that the degrees of freedom needed by the ASBFEM are only 5%–15% as needed by adaptive FEM for the examples. [Copyright &y& Elsevier]

Abstract: In a recent publication (Yang et al., 2009. Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials. Int. J. Solids Struct. 46 (17) 3222–3234), we developed a finite element method capable of modelling complex two-dimensional (2D) crack propagation in quasi-brittle materials considering random heterogeneous fracture properties. The present study extends the method to model three-dimensional (3D) problems. First, 3D cohesive elements are inserted into the initial mesh of solid elements to model potential crack surfaces by a specially designed, flexible and efficient algorithm and corresponding computer program. The softening constitutive laws of the cohesive elements are modelled by spatially-varying 3D Weibull random fields. Monte Carlo simulations are then carried out to obtain statistical information of structural load-carrying capacity. A concrete cube under uniaxial tension was analysed as an example. It was found that as the 2D heterogeneous model, the 3D model predicted realistic, complicated fracture processes and load-carrying capacity of little mesh-dependence. Increasing heterogeneity in terms of the variance in the tensile strength random fields resulted in lower mean and higher standard deviation of peak loads. Due to constraint effects and larger areas of unsmooth, non-planar fracture surfaces, 3D modelling resulted in higher mean and lower standard deviation of peak loads than 2D modelling. [Copyright &y& Elsevier]

Abstract: This paper develops an efficient numerical approach to predict deterministic size effects in structures made of quasi-brittle materials using the scaled boundary finite element method (SBFEM). Depending on the structure’s size, two different SBFEM-based crack propagation modelling methodologies are used for fracture analyses. When the length of the fracture process zone (FPZ) in a structure is of the order of its characteristic dimension, nonlinear fracture analyses are carried out using the finite element-SBFEM coupled method. In large-sized structures, a linear elastic fracture mechanics (LEFM)-based SBFEM is used to reduce computing time due to small crack propagation length required to represent the FPZ in an equivalent nonlinear analysis. Remeshing is used in both methods to model crack propagation with crack paths unknown a priori. The resulting peak loads are used to establish the size effect laws. Three concrete structures were modelled to validate the approach. The predicted size effect is in good agreement with experimental data. The developed approach was found more efficient than the finite element method, at least in modelling LEFM problems and is thus an attractive tool for predicting size effect. [Copyright &y& Elsevier]

Abstract: This study develops a novel hybrid method that combines the finite element method (FEM) and the scaled boundary finite element method (SBFEM) for crack propagation modelling in brittle and quasi-brittle materials. A very simple yet flexible local remeshing procedure, solely based on the FE mesh, is used to accommodate crack propagation. The crack-tip FE mesh is then replaced by a SBFEM rosette. This enables direct extraction of accurate stress intensity factors (SIFs) from the semi-analytical displacement or stress solutions of the SBFEM, which are then used to evaluate the crack propagation criterion. The fracture process zones are modelled using nonlinear cohesive interface elements that are automatically inserted into the FE mesh as the cracks propagate. Both the FEM’s flexibility in remeshing multiple cracks and the SBFEM’s high accuracy in calculating SIFs are exploited. The efficiency of the hybrid method in calculating SIFs is first demonstrated in two problems with stationary cracks. Nonlinear cohesive crack propagation in three notched concrete beams is then modelled. The results compare well with experimental and numerical results available in the literature. [Copyright &y& Elsevier]

Abstract: A numerical method is developed to simulate complex two-dimensional crack propagation in quasi-brittle materials considering random heterogeneous fracture properties. Potential cracks are represented by pre-inserted cohesive elements with tension and shear softening constitutive laws modelled by spatially-varying Weibull random fields. Monte Carlo simulations of a concrete specimen under uni-axial tension were carried out with extensive investigation of the effects of important numerical algorithms and material properties on numerical efficiency and stability, crack propagation processes and load-carrying capacities. It was found that the homogeneous model led to incorrect crack patterns and load–displacement curves with strong mesh-dependence, whereas the heterogeneous model predicted realistic, complicated fracture processes and load-carrying capacity of little mesh-dependence. Increasing the variance of the tensile strength random fields with increased heterogeneity led to reduction in the mean peak load and increase in the standard deviation. The developed method provides a simple but effective tool for assessment of structural reliability and calculation of characteristic material strength for structural design. [Copyright &y& Elsevier]

Abstract: This study develops a method coupling the finite element method (FEM) and the scaled boundary finite element method (SBFEM) for fully-automatic modelling of cohesive crack growth in quasi-brittle materials. The simple linear elastic fracture mechanics (LEFM)-based remeshing procedure developed previously is augmented by inserting nonlinear interface finite elements automatically. The constitutive law of these elements is modelled by the cohesive/fictitious crack model to simulate the fracture process zone, while the elastic bulk material is modelled by the SBFEM. The resultant nonlinear equation system is solved by a local arc-length controlled solver. The crack is assumed to grow when the mode-I stress intensity factor K I vanishes in the direction determined by LEFM criteria. Other salient algorithms associated with the SBFEM, such as mapping state variables after remeshing and calculating K I using a “shadow subdomain”, are also described. Two concrete beams subjected to mode-I and mixed-mode fracture respectively are modelled to validate the new method. The results show that this SBFEM–FEM coupled method is capable of fully-automatically predicting both satisfactory crack trajectories and accurate load–displacement relations with a small number of degrees of freedom, even for problems with strong snap-back. Parametric studies were carried out on the crack incremental length, the concrete tensile strength, and the mode-I and mode-II fracture energies. It is found that the K I ⩾0 criterion is objective with respect to the crack incremental length. [Copyright &y& Elsevier]

Abstract: In the scaled boundary finite element method (SBFEM), the analytical nature of the solution in the radial direction allows accurate stress intensity factors (SIFs) to be determined directly from the definition, and hence no special crack-tip treatment, such as refining the crack-tip mesh or using singular elements (needed in the traditional finite element and boundary element methods), is necessary. In addition, anisotropic material behaviour may be handled with ease. These advantages are used in this study, in which a newly-developed Frobenius solution procedure in the frequency domain for solving the governing differential equations of the SBFEM, is applied to model transient dynamic fracture problems. The complex frequency–response functions are first computed using the Frobenius solution procedure. The dynamic stress intensity factors (DSIFs) are then extracted directly from the response functions. This is followed by a fast Fourier transform (FFT) of the transient load and a subsequent inverse FFT to obtain the time history of DSIFs. Benchmark problems with isotropic and anisotropic material behaviour are modelled using the developed frequency-domain approach. Excellent agreement is observed between the results of this study and those in published literature. The effects of the mesh density, the material internal damping coefficient, the maximum frequency and the frequency interval determining the frequency–response functions on the resultant accuracy and the computational cost are also discussed. [Copyright &y& Elsevier]

Abstract: This paper presents a finite element (FE) model for fully automatic simulation of multiple discrete crack propagation in reinforced concrete (RC) beams. The discrete cracks are modelled based on the cohesive/fictitious crack concept using nonlinear interface elements with a bilinear tensile softening constitutive law. The model comprises an energy-based crack propagation criterion, a simple remeshing procedure to accommodate crack propagations, two state variable mapping methods to transfer structural responses from one FE mesh to another, and a local arc-length algorithm to solve system equations characterised by material softening. The bond-slip behaviour between reinforcing bars and surrounding concrete is modelled by a tension-softening element. An example RC beam with well-documented test data is simulated. The model is found capable of automatically modelling multiple crack propagation. The predicted cracking process and distributed crack pattern are in close agreement with experimental observations. The load–deflection relations are accurately predicted up to a point when compressive cracking becomes dominant. The effects of bond-slip modelling and the efficiency and effectiveness of the numerical algorithms, together with the limitations of the current model, are also discussed. [Copyright &y& Elsevier]

Numerical problems are often encountered in modelling crack propagation in concrete beams using non-linear finite element (FE) analysis, especially when sharp snap-back behaviour in load–displacement relations occurs. This paper firstly identifies 16 arc-length control based numerical strategies based on extensive literature review. They are then used to carefully model the structural behaviour of a four-point single notched shear beam using discrete crack modelling approach in which cracks are represented by interface elements with bilinear softening constitutive laws. Based on extensive FE analyses, detailed comparisons of the merits and demerits of these numerical algorithms are then made. The results indicate that the effectiveness and efficiency of different algorithms may vary considerably from one to another, with the local arc-length based procedures in conjunction with tangential stiffness strategy and reversible unloading model being the most robust. [Copyright &y& Elsevier]

The technique of bonding fibre reinforced polymer (FRP) composites to the tension face or sides of reinforced concrete (RC) beams has become very popular for strengthening or retrofitting purposes. A distinct characteristic of such strengthened RC beams is that they very often fail due to various premature debonding failures. This paper presents a fracture mechanics based finite element analysis of debonding failures. Numerical results for an experimental beam are presented. Initial findings show that the method can successfully simulate the concrete cover separation failure mode in FRP strengthened RC beams. [Copyright &y& Elsevier]

Fibre reinforced concrete (FRC) exhibits complicated failure modes such as fibre breakage, mortar cracking, crushing and spalling, fibre-mortar interfacial debonding, depending on many material properties, geometric dimensions, boundary and loading conditions. Most existing numerical models are unable to reproduce these failure modes that may occur simultaneously or sequentially in a specimen, mainly due to difficulties in generating finite element meshes with a large number of randomly-oriented fibres. Herein we develop a discrete-continuum coupled finite element modelling approach for FRC materials capable of effectively simulating all the major failure modes. The continuum damaged plasticity model is used to simulate damage and fracture behaviour of the mortar, while debonding of fibre-mortar interfaces is modelled by nonlinear cohesive interfacial elements. Unique techniques are devised to generate conforming meshes between fibres and the surrounding mortar so that the randomly-oriented fibres are easily modelled. The modelling approach is validated by simulating single fibre pullout tests with different inclination angles, notched and non-notched direct tensile tests and three-point bending beam tests with randomly-distributed multiple fibres. [ABSTRACT FROM AUTHOR]

This study develops an efficient numerical homogenisation approach for meso-scale concrete samples with randomly generated and packed aggregates and pores. A simple algorithm is devised to discretize samples into meshes consisting of semi-analytical scaled boundary finite element (SBFE) polygons only. As each aggregate is modelled by one SBFE polygon and only polygonal boundaries are discretized into nodes, the degrees of freedom of a model is significantly reduced compared with conventional finite element models. The volumetrically averaged stress inside a SBFE polygon is semi-analytically integrated, leading to high accuracy in the homogenised elastic properties. The effects of model size and porosity are statistically studied by extensive Monte Carlo simulations. A size effect law taking porosity into account is proposed to predict effective elastic moduli in good agreement with experimental data up to 200 mm model size. The meso-models are found statistically homogeneous when the size is about 4.5 times the maximum aggregate size. [ABSTRACT FROM AUTHOR]

Abstract: An efficient methodology for automatic dynamic crack propagation simulations using polygon elements is developed in this study. The polygon mesh is automatically generated from a Delaunay triangulated mesh. The formulation of an arbitrary n-sided polygon element is based on the scaled boundary finite element method (SBFEM). All kind of singular stress fields can be described by the matrix power function solution of a cracked polygon. Generalised dynamic stress intensity factors are evaluated using standard finite element stress recovery procedures. This technique does not require local mesh refinement around the crack tip, special purpose elements or nodal enrichment functions. An automatic local remeshing algorithm that can be applied to any polygon mesh is developed in this study to accommodate crack propagation. Each remeshing operation involves only a small patch of polygons around the crack tip, resulting in only minimal change to the global mesh structure. The increase of the number of degrees-of-freedom caused by crack propagation is moderate. The method is validated using four dynamic crack propagation benchmarks. The predicted dynamic fracture parameters show good agreement with experiment observations and numerical simulations reported in the literature. [Copyright &y& Elsevier]

Abstract: An automatic cohesive crack propagation modelling methodology for quasi-brittle materials using polygon elements is presented. Each polygon is treated as a subdomain that is modelled by the scaled boundary finite element method (SBFEM). Generalised stress intensity factors (SIFs) based on matrix power function solutions of singular stress fields obtained from the SBFEM following standard finite element stress recovery procedures is used to evaluate the crack propagation criterion and determine the crack propagation direction. Interface elements model the fracture process zones and are automatically inserted into the polygon mesh as the crack propagates. A shadow domain procedure couples the polygons and interface elements. It computes the load–displacement response and crack propagation criterion, taking into account the cohesive tractions on the crack edges that are modelled as side-face tractions in the SBFEM. Cracks are propagated using a simple, yet flexible local remeshing procedure that can remesh any arbitrary polygon. Only minimal changes are made to the global mesh structure each time the remeshing algorithm is called. Five cohesive crack propagation benchmarks are modelled to validate the developed method and demonstrate its salient features. [Copyright &y& Elsevier]