Search

In this paper, a modified laminated finite-element model based on subcell of unit cell and CDM material model was developed in nonlinear explicit finite-element code to investigate the dynamic response of 2D triaxial braided composite under ballistic impact of projectile. Six subcells, which were considered as laminate with different stacking sequences using solid elements, were employed to represent one unit cell of triaxial braided composites, therefore, the fiber-laying direction of braiding architecture is reproduced. In the prediction of the subcell model, an approximate round conical deformation area forms in the target and the failure modes are mainly longitudinal and transverse cracking due to tension. Compared with the continuum model, the subcell model is capable of analyzing the energy absorption of fiber in each direction. Although the failure modes are similar for both methods, the subcell model is more effective in prediction of impact wave propagation than the continuum model because it describes the fiber arrangement of triaxial braided composites. The developed subcell model will be an effective tool for the design process of carbon/epoxy composite fan casings. [ABSTRACT FROM AUTHOR]

This paper presents the computational-based ballistic limit of laminated metal panels comprised of high strength steel and aluminium alloy Al7075-T6 plate at different thickness combinations to necessitate the weight reduction of existing armour steel plate. The numerical models of monolithic configuration, double-layered configuration and triple-layered configuration were developed using a commercial explicit finite element code and were impacted by 7.62 mm armour piercing projectile at velocity range of 900 to 950 m/s. The ballistic performance of each configuration plate in terms of ballistic limit velocity, penetration process and permanent deformation was quantified and considered. It was found that the monolithic panel of high-strength steel has the best ballistic performance among all panels, yet it has not caused any weight reduction in existing armour plate. As the weight reduction was increased from 20-30%, the double-layered configuration panels became less resistance to ballistic impact where only at 20% and 23.2% of weight reduction panel could stop the 950m/s projectile. The triple-layered configuration panels with similar areal density performed much better where all panels subjected to 20-30% weight reductions successfully stopped the 950 m/s projectile. Thus, triple-layered configurations are interesting option in designing a protective structure without sacrificing the performance in achieving weight reduction. [ABSTRACT FROM AUTHOR]

Abstract: The paper describes a numerical study on the perforation of sheet steel by a projectile under high impact velocity to predict the ballistic behaviour and, in particular the ballistic limit. The parametric study is performed for several of the important variables in the numerical model using Abaqus/Explicit finite element code and their effects are reported in the paper. The variables considered include the target configuration (thickness), constitutive material model of the target, mass of the projectile, friction between the projectile and the target and shape of the projectile. The effect of the material behaviour was also studied through the use of two constitutive relations and to conclude the ballistic curves were calculated for several different target materials using data from literature. The numerical results were compared with existing data sourced from the literature and an analytical model was used to compare the trend obtained using numerical simulations in terms of ballistic limit. [Copyright &y& Elsevier]